Raphael Jacquot
a533e4ea37
cleanup the startup procedure
2019-03-14 17:52:03 +01:00
Raphael Jacquot
c62d562008
make it so that execution of bus programs happen
...
in the same cycle as the instruction
modify the way jump and rtn are handled
add some registers to the debugger
2019-03-14 16:37:51 +01:00
Raphael Jacquot
9549b53edc
implement bus trasfers debugging
2019-03-06 18:19:02 +01:00
Raphaël Jacquot
f86a1d03c5
implement base alu functionnality
2019-03-06 12:16:34 +01:00
Raphael Jacquot
f12a74a917
print a "." when the bus is active, but not reading
2019-03-05 06:47:02 +01:00
Raphaël Jacquot
f3d1a4d9d4
implement D0=(5)
2019-03-05 06:14:38 +01:00
Raphaël Jacquot
28483afe9a
implement CONFIG and RTN* (0[0-3])
2019-03-05 05:39:34 +01:00
Raphael Jacquot
9168cbc1a2
victory, this works on the fpga \o/
...
using "=" instead of "<=" is evil !
make the fpga halt when necessary
2019-03-04 22:48:09 +01:00
Raphael Jacquot
4d578f8f18
ok, we're getting somewhere
2019-03-04 21:10:12 +01:00
Raphael Jacquot
f502451548
update debugger
2019-03-04 19:15:44 +01:00
Raphael Jacquot
6964b72df1
ok. serial sort of works, except it doesn't...
2019-03-04 18:29:00 +01:00
Raphael Jacquot
6f3f3ce73c
debug the seial port
2019-03-04 17:01:59 +01:00
Raphael Jacquot
dc927031e4
cleanups and simplifications
2019-03-04 15:44:51 +01:00
Raphael Jacquot
ae164feb19
there, serial port works at 115200
...
needed to add \r,..
2019-03-04 15:24:05 +01:00
Raphaël Jacquot
7708d7a85c
attached serial port tentative
2019-03-04 14:40:31 +01:00
Raphaël Jacquot
479382e004
export rstk_ptr to debugger
...
implement LCHEX (and almost done for LAHEX)
2019-03-04 13:28:08 +01:00
Raphaël Jacquot
e47f12f1d7
implement push PC to RSTK
2019-03-04 11:52:05 +01:00
Raphaël Jacquot
908b96df6f
implement CLRHST and variants
...
implement SET[HEX|DEC]
2019-03-04 10:53:37 +01:00
Raphaël Jacquot
c20c893234
replace X with ? to make a difference
2019-03-04 10:15:11 +01:00
Raphaël Jacquot
18a56d750b
export main registers to debugger
...
add C register
implement C=P n
add dumping C register
2019-03-04 09:58:13 +01:00
Raphaël Jacquot
009f01f5d7
implement 8[45]x ST=[01] n
...
implement GOVLNG
dump 2 lines of registers in debugger now
2019-03-04 08:08:02 +01:00
Raphaël Jacquot
6dd38500a8
add a counter to slow things down
2019-03-03 15:19:07 +01:00
Raphaël Jacquot
b58be38b10
connect debugger to leds
2019-03-03 13:33:32 +01:00
Raphaël Jacquot
eeb5150159
add the beginnings of a PC and RSTK handler
...
fix bad maths in the rom-gx-r module
wire in the PC in the debugger and the control unit
add an execute flag, to start execution of partially
decoded instructions that need reading data from the
instruction stream
2019-03-03 09:33:42 +01:00
Raphaël Jacquot
3347a9702d
add display of the carry
2019-03-03 07:45:03 +01:00
Raphaël Jacquot
b3d72c1d3b
add some more debugging functionnality
...
segregate reading of the rom in it's own little world
2019-03-03 07:25:22 +01:00
Raphaël Jacquot
006b663147
implement hex->ascii conversion with a table
2019-03-03 06:57:14 +01:00
Raphael Jacquot
182623e043
remove char counting aid
2019-03-02 22:48:34 +01:00
Raphaël Jacquot
42e8a146ce
start implementing some type of debugging functionnality
2019-03-02 21:45:38 +01:00
Raphaël Jacquot
2fcd9f7b23
decode our first instruction
...
execute said instruction
start implementing the debugging engine to see what we are doing
2019-03-02 19:40:31 +01:00
Raphael Jacquot
8ce2d2a993
implement more of the bus controller
2019-03-02 13:22:09 +01:00