Commit graph

821 commits

Author SHA1 Message Date
Ryan Dwyer
bfa20e65d8 Clean up focus follows mouse logic
Firstly, this fixes a recent regression where having
`focus_follows_mouse yes` and hovering an inactive tab caused it to gain
focus. The code was missing a view_is_visible check.

The code is handling the logic for both focus_follows_mouse yes and
focus_follows_mouse always, where the latter will apply when nudging the
mouse after a workspace switch. However, the view_is_visible check
didn't apply when using focus_follows_mouse always, so hovering a tab
with that configuration would cause is to focus. This was a bug. When
adding the view_is_visible check, it now applies to both yes and always.

Note that the comment about the split container was wrong. At this point
the hovered node cannot be a split container because it passed the
node_is_view check. The comment has been removed.

Lastly, the else condition is completely removed. This didn't appear to
have any practical use. Setting focus to the result of
seat_get_focus_inactive is very likely going to be a no op. There is a
slim chance that this will break something, and if so I'd like to find
out what so it can be properly documented in the code.
2019-03-19 14:38:06 -06:00
Ryan Dwyer
e9a476244d Remove debug tree
This feature has served its purpose. It's better to use IPC now.
2019-03-18 11:29:19 -04:00
Ryan Dwyer
7b9ae42331 Introduce default seatop
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.

The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.

Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.

The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.

The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.

The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.

The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.

The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
2019-03-17 10:02:04 -06:00
Ryan Dwyer
fb3475e291 Replace seatup allows_events with button callback 2019-03-17 10:02:04 -06:00
Brian Ashworth
d8f74e4706 Set prev_workspace_name based off of focus
This moves setting `seat->prev_workspace_name` from `workspace_switch`
to `set_workspace`. `workspace_switch` is only called when using a
`workspace` command to change the workspace so any workspace change
based on criteria was not altering `seat->prev_workspace_name`. By
moving it to `set_workspace`, which is called by `seat_set_focus`, it
will change any time focus changes to a node on a different workspace
2019-03-14 10:03:45 -06:00
emersion
076257a978 Stop using wlr_output->{lx,ly}
Also fixes sway_output->{lx,ly,width,height} not being updated. Also fixes
output_get_in_direction adding buffer coords to layout coords.
2019-03-11 12:43:01 -04:00
Ryan Dwyer
783b3d6b37 Fix click behaviour
By the time seatop_allows_events was called, seatop_impl was already
NULL, causing the function to always return false. This means a press
event was sent to clients without a corresponding release event.

This patch moves the call to seatop_finish to after the
seatop_allows_events check.
2019-03-11 14:55:54 +01:00
Ryan Dwyer
d16845d5f0 Don't send button events to surfaces when dragging or resizing
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.

The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
2019-03-11 14:55:54 +01:00
Ben Challenor
30931ad9e7
Make raw keysyms take precedence over translated
Allows both BackSpace and Shift+BackSpace to be bound under the US
keyboard layout, per #3705.
2019-03-10 23:01:49 +01:00
emersion
191305468c Fix crash in cmd_workspace when layer surface has focus 2019-03-10 14:59:34 -06:00
Jeff Peeler
a73e8f1328 fix "directive argument is null" errors 2019-03-09 14:59:28 -07:00
Ryan Dwyer
bdac0df4f8 Allow concurrent clicks
If two cursor buttons are pressed at the same time, the client will now
be notified of the second button press.

The main reason for not sending the concurrent presses was due to an
early return in dispatch_cursor_button if a seatop is in progress. This
patch makes it call seat_pointer_notify_button prior to returning. But
it also has to make sure there's not a mismatch in events such as a
release without a press.

Prior to this patch, the down seatop would send press and release events
in its begin and finish functions. No other seatops did this. A press
event would be sent prior to starting tiling drag, but never an
associated release.

After this patch, no seatops send their own press or release events. We
send them prior to calling the seatop begin functions, then the first
part of dispatch_cursor_button handles all presses during seatops and
when releasing the seatop.
2019-03-04 07:51:22 -07:00
Brian Ashworth
430359519c floating_maximum_size: change default behavior
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.

This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
2019-03-02 09:10:26 +01:00
emersion
88b283c557 seat: don't send button release when not pressed
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.

This commit moves the logic used to send pressed/released into the "down"
operation.
2019-02-28 23:02:06 -05:00
Rouven Czerwinski
4e028dba47 cursor: intitialize sx and sy to zero
If node_at_coords does an early return without setting these values, they can be
used uninitialized later. Initialize both to zero.
2019-02-27 00:35:51 -05:00
Rouven Czerwinski
35d610a43c cursor: remove unused node assignement
The node variable is not used before its reassigned later in the function,
remove the assignement.
2019-02-27 00:35:51 -05:00
emersion
656541bcc4
Update for swaywm/wlroots#1517 2019-02-23 19:04:10 +01:00
Brian Ashworth
9350a52c0e handle_seat_node_destroy: update seat->workspace
If an unmanaged or layer surface is focused when an output gets
disabled and an empty workspace on the output was focused by the seat,
the seat needs to refocus it's focus inactive to update the value of
`seat->workspace`.
2019-02-23 09:21:19 +01:00
Brian Ashworth
f078a1ccb8 input/cursor: allow whole-window bindings on ws
To match i3's behavior, this allows mouse bindings to be triggered over
a workspace when `--whole-window` is given.
2019-02-22 13:32:34 +01:00
Brian Ashworth
d3d7956576 Handle NULL from output_get_active_workspace
This modifies the places where output_get_active_workspace is called to
handle a NULL result. Some places already handled it and did not need a
change, some just have guard off code blocks, others return errors, and
some have sway_asserts since the case should never happen. A lot of this
is probably just safety precautions since they probably will never be
called when `output_get_active_workspace` is not fully configured with a
workspace.
2019-02-21 21:18:03 +01:00
emersion
59f2056022
Fix drag icon map listener not removed 2019-02-18 13:19:58 +01:00
Vincent Vanlaer
cfacf85755 Check layout before getting pointer surface coords
This fixes issues of clients at the edge of the screen, like swaybar,
ignoring buttons.
2019-02-16 21:46:19 +01:00
Brian Ashworth
e8c472aee9 seatop_move_tiling: do not move to descendant
In seatop_move_tiling, it is possible to cause a stack overflow by
dragging a container into one of its descendants. This disables the
ability to move into a descendant.
2019-02-14 14:07:13 +01:00
Brian Ashworth
ab42874f71 seat: allow tree focus changes while layer focused
This allows the focused inactive tree node and visible workspaces to be
changed while a surface layer has focus. The layer temporarily loses
focus, the tree focus changes, and the layer gets refocused.
2019-02-14 11:01:08 +01:00
Brian Ashworth
9b8249c350 seatop_move_tiling: use tab/stack parent not self
When moving a descendant of a tabbed or stacked container, it is possible
for the target node to be the node being moved. This causes a segfault in
`handle_finish` since the node will be detached and then attempted to be
attached to it own parent, which is NULL due to the detach. In this
case, the target node should not be set to the node being moved, but the
parent of the node. This also allows for a descendant of a tabbed or
stacked container to be dragged out of the tabs/stacks and to be a
sibling of the tabbbed/stacked container, which was not previously
possible.
2019-02-13 14:32:47 -05:00
Brian Ashworth
1bccde68a4 cursor: relative-pointer-v1 time is usec
In handle_cursor_motion, the timestamp passed to
`wlr_relative_pointer_manager_v1_send_relative_motion` should be
microseconds (not milliseconds) according to relative-pointer-v1 spec.
2019-02-13 09:49:34 +01:00
emersion
97c89b24b8
Rebase cursor when a layer surface maps
Also removes an extraneous arrange_outputs call, it's already called if
necessary in arrange_layers.

Updates https://github.com/swaywm/sway/issues/3080
2019-02-12 22:57:23 +01:00
Brian Ashworth
3952d4f4f3 input/keyboard: respect solo repeat_{rate,delay}
If `repeat_rate` or `repeat_delay` is set without the other being set,
the default was being used for both. This changes the logic to respect
the value given and use the default for the other when only one is set.
2019-02-10 18:45:02 +01:00
Brian Ashworth
f5190d1f79 bar_cmd_modifier: add support for none
sway-bar(5) documents `modifier none`, which comes from i3. This
implements the functionality for `modifier none` since it was not
previously implemented. The bar modifier toggles visibility of the bar
when the bar mode is set to hide. When the bar modifier is set to
`none`, the ability to toggle visibility of the bar will be disabled.
2019-02-08 16:02:45 +01:00
Brian Ashworth
ec5da0ca5b seat_configure_tablet_tool: configure xcursor
Since a tablet tool provides the WL_SEAT_CAPABILITY_POINTER capability,
sway will attempt to use the xcursor manager to set a cursor image. If
the tablet tool was the first (and possibly only) device to provide the
capability for the seat, the xcursor manager was not being configured
before attempting to set a cursor image. This was due to
`seat_configure_xcursor` only being called in `seat_configure_pointer`.
Since the xcursor manager was NULL in this case, it would cause a
segfault when attempting to set a cursor image. This adds a call to
`seat_configure_xcursor` in `seat_configure_tablet_tool` to ensure that
the seat has a xcursor manager.
2019-02-07 09:41:58 +01:00
Drew DeVault
a1a99421a1
Merge pull request #3562 from vilhalmer/focus_follows_mouse-workspace-last-inactive
Focus workspace inactive node with focus_follows_mouse
2019-02-03 20:15:21 +01:00
Brian Ashworth
7299b9a6ca seat_cmd_cursor: do not create non-existing seat
If a seat does not exist in seat_cmd_cursor, do not create it. A seat
without any attachments is useless since it will have no capabilities.

This changes `input_manager_get_seat` to have an additional argument
that dictates whether or not to create the seat if it does not exist.
2019-02-03 14:01:29 -05:00
vilhalmer
f8a9117149
Fall back to wildcard in sway_cursor_constrain 2019-02-03 13:46:44 -05:00
vilhalmer
907595b10d
Skip constraining cursor if no seat config 2019-02-03 13:44:37 -05:00
vilhalmer
a3332c70bf
Focus ws inactive node with focus_follows_mouse 2019-02-03 12:12:40 -05:00
Drew DeVault
de76c4e071
Merge pull request #3543 from emersion/relative-pointer-usec
relative-pointer-v1: time is in usec, not msec
2019-02-01 09:27:00 +01:00
Brian Ashworth
ebe5399ed6 pointer_constraint: change to a seat subcommand
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.

This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
2019-01-31 22:58:52 -05:00
emersion
dde9fc19de
relative-pointer-v1: time is in usec, not msec 2019-01-30 21:30:44 +01:00
Drew DeVault
0c975af1fb Send pointer frames on tool events 2019-01-30 14:09:50 -05:00
Drew DeVault
4b87edeba4 Missed a spot in pointer constraints 2019-01-30 14:06:44 -05:00
Drew DeVault
a6d41254c9 Add pointer_constraint command 2019-01-30 19:53:59 +01:00
absrd
ee4b8a3938 Add relative pointer 2019-01-30 19:53:59 +01:00
Las
cedde21c96 Implement pointer-constraints-unstable-v1 2019-01-30 19:53:59 +01:00
Drew DeVault
783fadab28
Merge pull request #3423 from RyanDwyer/fullscreen-global
Implement fullscreen global
2019-01-27 18:06:50 -05:00
emersion
a452f8f822
Update for swaywm/wlroots#1503 2019-01-27 12:59:46 +01:00
Ryan Dwyer
20aa8ee67d Implement fullscreen global 2019-01-25 08:29:21 +10:00
Ian Fan
5d6f906bd7 Use sway_log_errno instead of strerror 2019-01-24 11:33:54 +00:00
emersion
75406bb93b Update for swaywm/wlroots#1402 2019-01-24 11:48:19 +01:00
Brian Ashworth
ab0248a545 seat_create: set initial focus for added seats
This sets the initial focus for all seats other than the first seat,
which gets it focus on launch. The ensures that all seats have something
focused.
2019-01-22 09:33:58 +01:00
M Stoeckl
d7ff776552 Move sway-specific functions in common/util.c into sway/
Modifier handling functions were moved into sway/input/keyboard.c;
opposite_direction for enum wlr_direction into sway/tree/output.c;
and get_parent_pid into sway/tree/root.c .
2019-01-21 12:39:16 -05:00
emersion
e134da3023
Fix one remaining wlr_log call 2019-01-21 13:02:03 +01:00
M Stoeckl
1211a81aad Replace wlr_log with sway_log
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.

wlr_log_init is still invoked in sway/main.c

This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
2019-01-21 12:59:42 +01:00
Brian Ashworth
5c834d36e1 Log libinput_config_status errors
This add errors from calls to `libinput_device_config_*_set` to the
debug log. This may be useful when looking at issues related to input
devices and config settings not working.
2019-01-21 08:46:36 +01:00
emersion
3b7a7462a2 Fix crash in cursor_rebase with multiple screens
Designing the output configuration sequence without invalid state is tricky.

We have one function, apply_output_config, that takes an output and (besides
other things) performs a modeset and inserts the output in the output layout.
The modeset can fail, in which case we don't want the output to be enabled.
We also have an output_enable function, which calls output_apply_config and
also configures the output's workspace and inserts it in the root container.

Now, we have two choices.

Either we configure the output before it's been inserted in the root container
and then, if the modeset was successful, we insert it and create the workspace.
The main issue with this approach is that configuring the output triggers a
handful of signals, namely wlr_output.mode and wlr_output_layout.change. In
those event handlers, we need to make sure to ignore these outputs in the
process of being configured.

Either we first insert the output, create the workspace and then try to
configure it. It means we need to undo everything if the modeset fails. The
main issue with this solution is that it enables and disables the output very
quickly, creates a workspace and immediately destroys it, and maybe moves
views back and forth (see output_evacuate).

I've tried to make it so an output isn't enabled then immediately disabled. We
already have code for ignoring outputs when the output is being destructed.

Fixes https://github.com/swaywm/sway/issues/3462
2019-01-19 08:29:46 +01:00
Brian Ashworth
02bbefda20 bar_cmd_tray_bind: Use mouse button helpers
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.

This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.

For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
2019-01-16 11:12:45 +01:00
Brian Ashworth
638b04b3e0 seatop_begin_down: raise floating
In `seatop_begin_down`, raise the floating container. This appears to
have been dropped in the transition to seatops.
2019-01-15 22:45:01 +01:00
Rouven Czerwinski
f7309778a7 cursor: send clear_focus on hide and enter event on unhide
Clear the focus when we hide the cursor and show it again during the unhide
action. The unhide function will rebase the cursor after the unhide.

Tested by looking at the WAYLAND_DEBUG=1 output of termite.

Also call cursor_handle_activity before sending pointer events to send the enter
events to the surface if the cursor was hidden before.

Fixes #3431
2019-01-15 14:06:48 -05:00
Ryan Dwyer
2024f1da72 Resize only current and immediate siblings rather than all siblings
For example, create layout V[view view view] and resize the leftmost
view using mod+rightclick. Previously, the edge between view 2 and 3
would be adjusted as well. Now this edge will remain constant, which
matches the behaviour of i3.

To do this operation correctly, the resize tiling seatop now keeps track
of two containers, as the container that resizes horizontally will be a
different container to the one which resizes vertically (one will be an
ancestor). The tiling resize seatop now figures out these containers
during the start of the operation and keeps references to them in the
event. A new function container_find_resize_parent has been introduced
to do this. This function is also used by the resize command.

During cursor motion, the seatop logic is similar to before, but now has
to choose the correct container to resize.

In resize.c, container_resize_tiled and resize_tiled have been merged
into one. One of them originally did nothing except pass the values
through to the other.

container_resize_tiled now takes a simplified approach where it just
finds the immediate siblings on either side and resizes them without
worrying about the others. The parellel_coord and parallel_size
functions are no longer needed and have been removed.
2019-01-15 08:01:21 +10:00
Brian Ashworth
2573606b60 Disarm key repeat on reload
When resetting the keyboard during reload, disarm the key repeat on all
keyboards since the bindings (and possibly keyboard) will be freed before
the key repeat can go off.
2019-01-14 20:15:23 +01:00
Drew DeVault
9f9ef76175
Merge pull request #3343 from RedSoxFan/seat-cursor-buttons-improved
Improve mouse button parsing: seat cursor buttons
2019-01-13 20:40:42 -05:00
Drew DeVault
db1631b67d
Merge pull request #3342 from RedSoxFan/scroll-buttons-improved
Improve mouse button parsing: input scroll_button
2019-01-13 20:40:00 -05:00
Drew DeVault
23ab56bbf7
Merge pull request #3402 from RyanDwyer/refactor-seatops
Refactor seat operations to use an interface
2019-01-13 20:38:34 -05:00
Drew DeVault
08569aab36
Merge pull request #3388 from RedSoxFan/reset-inputs-on-reload
reload: reset input configs
2019-01-13 20:37:05 -05:00
Brian Ashworth
4e6bd53abf input_cmd_scroll_button: utilize mouse btn helpers
This modifies `input_cmd_scroll_button` to utilize the mouse button
helper `get_mouse_button` when parsing the button. x11 axis buttons are
not supported with this command and `CMD_INVALID` will be returned, but
all other x11 buttons, button event names, and button event codes should
be working
2019-01-10 12:45:52 -05:00
Brian Ashworth
aa1c838f97 seat_cmd_cursor: utilize mouse button helpers
This modifies `seat_cmd_cursor` to utilize `get_mouse_button` when
parsing mouse buttons for the `press` and `release` operations. All x11
buttons, button event names, and button event codes are supported.
For x11 axis buttons, `dispatch_cursor_axis` is used instead of
`dispatch_cursor_button`. However the `press`/`release` state is ignored
and the either axis event is processed. This also removes support for
`left` and `right` in favor of `BTN_LEFT` and `BTN_RIGHT`.
2019-01-10 11:47:34 -05:00
Ryan Dwyer
ed5aafd90b Refactor seat operations to use an interface
This splits each seat operation (drag/move tiling/floating etc) into a
separate file and introduces a struct sway_seatop_impl to abstract the
operation.

The move_tiling_threshold operation has been merged into move_tiling.

The main logic for each operation is untouched aside from variable
renames.

The following previously-static functions have been made public:
* node_at_coords
* container_raise_floating
* render_rect
* premultiply_alpha
* scale_box
2019-01-10 22:04:42 +10:00
Ian Fan
15ac580b28
Merge pull request #3341 from RedSoxFan/mouse-bindings-improved
Improve mouse button parsing: helpers and bind{code/sym}
2019-01-10 10:55:22 +00:00
emersion
9abac85888
Merge pull request #3399 from RedSoxFan/fix-output-destruction-segfaults
Fix segfaults on output destruction
2019-01-10 09:20:07 +01:00
Brian Ashworth
8fd3f32c79 Fix segfaults on output destruction
This fixes two causes of segfaulting when an output is destroyed.

The first occurred when an output was never enabled. The issue was that
the destroy signal was never initialized so when it was emitted, sway
segfaulted. This was fixed by moving the initialization into
`output_create` since all outputs, regardless of whether they have ever
been enabled, will be destroyed at some point.

The second occurred when the cursor was on an output that was being
destroyed. The sway output would have already been removed, but if there
are other outputs, a cursor rebase would still occur. Since the
wlr_output still existed and the sway output was destroyed, the cursor
could be over nothing, resulting in a segfault when trying to get the
sway output, which was destroyed.
2019-01-10 03:07:36 -05:00
Brian Ashworth
a8b3ae9284 cursor: allow scrolling tabs/stack on title border
This allows tabbed and stacked containers to be scrolled through when
the cursor is over the border of the title bar. The borders around the
other three edges of the contents should not be affected by this change.
2019-01-09 18:15:15 -05:00
Brian Ashworth
6f6a9af60e Add helpers for improved mouse button parsing
The following helper functions have been added to aid with parsing mouse
buttons from a string:

1. `get_mouse_bindsym`: attempts to parse the string as an x11 button
(button[1-9]) or as an event name (ex BTN_LEFT or BTN_SIDE)
2. `get_mouse_bindcode`: attempts to parse the string as an event code
and validates that the event code is a button (starts with `BTN_`).
3. `get_mouse_button`: this is a conveniency function for callers that
do not care whether a bindsym or bindcode are used and attempts to parse
the string as a bindsym and then bindcode.

None of these functions are used in this commit. The sole purpose of
this commit is to make the larger set more granular and easier to
review/manipulate. There will be a series of commits following this one
that will modify any command which uses a mouse button to use these
helpers.
2019-01-09 11:29:04 -05:00
Brian Ashworth
4696f49ecc reload: reset input configs
This resets all input options to their defaults on reload. This also
fixes some debug log typos in `input_manager_libinput_config_pointer`.
2019-01-09 11:24:15 -05:00
Jan Beich
0a4c4f3e52 Simplify evdev includes on FreeBSD by relying on up-to-date package
evdev-proto is installed by a dependency, so some files have been missed:

  In file included from ../sway/input/cursor.c:3:
  /usr/local/include/libevdev-1.0/libevdev/libevdev.h:30:10: fatal error: 'linux/input.h' file not found
  #include <linux/input.h>
	   ^~~~~~~~~~~~~~~
  ../swaybar/i3bar.c:3:10: fatal error: 'linux/input-event-codes.h' file not found
  #include <linux/input-event-codes.h>
	   ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-01-09 11:02:05 +00:00
Brian Ashworth
1feb2ce064 keyboard: update repeat timer before execution
Since the keyboard can be destroyed by executing a binding (reloading
with a different seat attachment config), update the repeat timer before
executing the binding.
2019-01-09 01:07:29 -05:00
Drew DeVault
da8f24de1d
Merge pull request #3385 from robertgzr/reset_output_mapping
cursor: allow mapping to all outputs
2019-01-08 20:36:56 -05:00
Robert Günzler
145ac2c571 cursor: allow mapping to all outputs
Running `input "<input>" map_to_output *` resets the mapping to all outputs
2019-01-09 02:33:30 +01:00
emersion
140bc2dd5b
Merge pull request #3275 from ianyfan/remove-readline
Rewrite strip_whitespace and remove readline.c
2019-01-08 10:05:37 +01:00
Rouven Czerwinski
cc858e605a seat: unhide the cursor if it is warped to focus
Unhide the cursor if container warping is enabled.
Also set the image_surface to NULL during view_unmap, otherwise the cursor will
try to access the surface which is currently being unmapped.
2019-01-07 10:30:19 -05:00
Rouven Czerwinski
fde900861a cursor: move unhide and timeout retrieval into separate functions
The unhide and timeout retrieval functions are needed in a later commit. No
functional changes.
2019-01-07 10:30:19 -05:00
David96
ee50134634 Apply tiling_drag_threshold to all containers 2019-01-03 12:52:37 -05:00
Brian Ashworth
5bf4daf263 Implement tiling_drag_threshold
Implements `tiling_drag_threshold <threshold>` to prevent accidental
dragging of tiling containers. If a container (and all of its
descendants) are unfocused and the tile bar is pressed, a threshold
will be used before actually starting the drag. Once the threshold has
been exceeded, the cursor will change to the grab icon and the operation
will switch from `OP_MOVE_TILING_THRESHOLD` to `OP_MOVE_TILING`.
2019-01-02 23:33:33 +01:00
Ian Fan
967566e37f stringop.c: rewrite strip_whitespace 2019-01-01 09:01:24 +00:00
Brian Ashworth
4a3ada303b Apply implicit fallback seat config
The implicit fallback seat config needs to be applied (if created).
Otherwise, the input devices will still be removed from the implicit
default seat on reload when there is any seat config.
2018-12-31 11:37:07 +01:00
Brian Ashworth
4d88c95790 hide_cursor: change to a seat subcommand
This makes hide_cursor a seat subcommand, which allows for seat specific
timeouts.
2018-12-30 14:17:24 +01:00
Brian Ashworth
09bb71f650 Verify seat fallback settings on reload
This fixes an issue where on reload, all input devices that were added
via an implicit fallback to the default seat would be removed from the
default seat and applications would crash due to the seat having no
capabilities.

On reload, there is a query for a seat config with the fallback setting
set (it can either be true or false). If no such seat config exists, the
default seat is created (if needed) and has the implicit fallback true
applied to its seat config. This is the same procedure that occurs when
a new input is detected.
2018-12-30 14:12:36 +01:00
Brian Ashworth
3e8f548d1d Revamp seat configs
This makes seat configs work like output and input configs do. This also
adds support for wildcard seat configs. A seat config is still created
in the main seat command handler, but instead of creating a new one in
the subcommands and destroying the main seat command's instance, the
seat subcommands modify the main one. The seat config is then stored,
where it is merged appropriately. The seat config returned from
`store_seat_config` is then applied. When attempting to apply a wildcard
seat config, a seat specific config is queried for and if found, that is
used. Otherwise, the wildcard config is applied directly.

Additionally, instead of adding input devices to the default seat
directly when there is no seat configs, a seat config for the default
seat is created with only fallback set to true, which is more explicit.
It also fixes an issue where running a seat command at runtime (with no
seat config in the sway config), would result in all input devices being
removed from the default seat and leaving sway in an unusable state.

Also, instead of checking for any seat config, the search is for a seat
config with a fallback option seat. This makes it so if there are only
seat configs with fallback set to -1, the default seat is still created
since there is no explicit notion on what to do regarding fallbacks.
However, if there is even a single fallback 0, then the default seat is
not used as a fallback. This will be needed for seat subcommands like
hide_cursor where the user may only want to set that property without
effecting anything else.
2018-12-29 19:40:40 +01:00
Brian Ashworth
0dbf2673a1 Remove button from state on release during op
This fixes a bug in `dispatch_cursor_button` where if there was an
operation occurring, the button would not be removed from the state on
release. This resulted in the button appearing to be permanently pressed
and caused mouse bindings to not match correctly.
2018-12-29 16:36:48 +01:00
Brian Ashworth
3248c823ed Split image_surface handling into own function 2018-12-25 13:31:56 +01:00
Brian Ashworth
5fca74a1f1 Implement hide_cursor <timeout> command
Allows the cursor to be hidden after a specified timeout in
milliseconds
2018-12-25 13:31:56 +01:00
Brian Ashworth
a223030b70 Change mouse buttons to x11 map and libevdev names
This modifies the way mouse bindings are parsed. Instead of adding to
BTN_LEFT, which results in button numbers that may not be expected,
buttons will be parsed in one of the following ways:

1. `button[1-9]` will now map to their x11 equivalents. This is already
the case for bar bindings. This adds support for binding to axis events,
which was not possible in the previous approach.

2. Anything that starts with `BTN_` will be parsed as an event code name
using `libevdev_event_code_from_name`. This allows for any button to be
mapped to instead of limiting usage to the ones near BTN_LEFT. This also
adds a dependency on libevdev, but since libevdev is already a dependency
of libinput, this should be fine. If needed, this option can have dependency
guards added.

Binding changes:
- button1: BTN_LEFT -> BTN_LEFT
- button2: BTN_RIGHT -> BTN_MIDDLE
- button3: BTN_MIDDLE -> BTN_RIGHT
- button4: BTN_SIDE -> SWAY_SCROLL_UP
- button5: BTN_EXTRA -> SWAY_SCROLL_DOWN
- button6: BTN_FORWARD -> SWAY_SCROLL_LEFT
- button7: BTN_BACK -> SWAY_SCROLL_RIGHT
- button8: BTN_TASK -> BTN_SIDE
- button9: BTN_JOYSTICK -> BTN_EXTRA

Since the axis events need to be mapped to an event code, this uses the
following mappings to avoid any conflicts:
- SWAY_SCROLL_UP: KEY_MAX + 1
- SWAY_SCROLL_DOWN: KEY_MAX + 2
- SWAY_SCROLL_LEFT: KEY_MAX + 3
- SWAY_SCROLL_RIGHT: KEY_MAX + 4
2018-12-25 13:27:08 +01:00
Brian Ashworth
88d96bc41f Combine output_by_name and output_by_identifier
This combines `output_by_name` and `output_by_identifier` into a single
function called `output_by_name_or_id`. This allows for output
identifiers to be used in all commands, simplifies the logic of the
callers, and is more efficient since worst case is a single pass through
the output list.
2018-12-20 19:55:29 +01:00
Brian Ashworth
0ea54833d4 Focus node before tiling drag if on titlebar
Before attempting to drag a tiling container by its titlebar,
focus it. This fixes clicking on titlebars to focus a container.
2018-12-17 16:55:44 -05:00
Brian Ashworth
8d7ebc258a Allow tiling views to be dragged by the titlebar
Enables titling views to be dragged by the titlebar. This is in addition
to using the modifier and dragging them from anywhere on the container
surface. Floating views already allow this behavior.
2018-12-17 09:08:26 +01:00
Rostislav Pehlivanov
1442d4e688 Update for swaywm/wlroots#1377
-Werror is eͫ̐ͭ҉vi͆ͦ̏ͦlͥ̀͒̊͂͛
2018-12-16 15:04:06 +01:00
Brian Ashworth
c2499772b9 Fix focusing on non-visible workspace
My previous attempt was not quite right. Changing the focus stack on a
non-visible workspace should only be blocked if the focus would be set
to the workspace itself
2018-12-14 13:59:54 -05:00
Brian Ashworth
bc981b2bbb Keep focus when destroying containers on nonvis ws
Changing the focus stack when destroying a container's node on a
non-visible workspace (on an non-focused output) incorrectly causes
the non-visible workspace to become visible. If the workspace is empty,
it will not be destroyed since it is now visible. Additionally since
there was no workspace::focus event, swaybar still shows the previous
workspace as focus-inactive. It also makes no sense to change visible
workspaces due to a container on a non-visible workspace being
destroyed.

Since the focus will either be set when switching to the non-visible
workspace or the workspace will be destroyed due to being empty, there
is no need to change the focus stack when destroying a container on a
non-visible workspace.
2018-12-12 10:13:50 +01:00
emersion
3a310f92ab
Replace _XOPEN_SOURCE with _POSIX_C_SOURCE
And make sure we don't define both in the same source file.
2018-11-25 17:19:43 +01:00
Spencer Michaels
70bc4c3ab6 Add scroll factor config option. 2018-11-18 13:49:30 -05:00
emersion
cad851805b
Use #if instead of #ifdef 2018-11-18 00:33:06 +01:00
Ryan Dwyer
be9348d25c Move view {x,y,width,height} into container struct
This renames/moves the following properties:

* sway_view.{x,y,width,height} ->
sway_container.content_{x,y,width,height}
    * This is required to support placeholder containers as they don't
    have a view.
* sway_container_state.view_{x,y,width,height} ->
sway_container_state.content_{x,y,width,height}
    * To remain consistent with the above.
* sway_container_state.con_{x,y,width,height} ->
sway_container_state.{x,y,width,height}
    * The con prefix was there to give it contrast from the view
    properties, and is no longer useful.

The function container_set_geometry_from_floating_view has also been
renamed to container_set_geometry_from_content.
2018-11-17 21:29:42 +10:00
emersion
4ce18d2744
Fix segfault in dispatch_cursor_button 2018-11-15 16:35:19 +01:00
Connor E
4a21981855 Add focus_follows_mouse always. (#3081)
* Add focus_follows_mouse_mode.

* Fail if focus_follows_mouse is invalid.

* Fix indentation.
2018-11-06 21:58:08 +01:00
madblobfish
417a10f477 removed unneeded code fragment 2018-11-04 17:38:13 +01:00
Drew DeVault
c18cd9dd03
Merge pull request #3021 from Snaipe/singlekey-binding-trigger
binding: match single-key bindings if no multi-key binding matched
2018-11-03 17:57:59 +01:00
Ryan Dwyer
528c7495bb Move view border properties to container struct
This will be needed to implement layout saving and restoring, as we need
to be able to configure borders on a placeholder container which has no
view.
2018-10-31 23:56:20 +10:00
Franklin "Snaipe" Mathieu
f8e83ee20a binding: match single-key bindings if no multi-key binding matched
This makes bindings more snappy when the user is typing faster than
his keycaps are releasing.

Signed-off-by: Franklin "Snaipe" Mathieu <me@snai.pe>
2018-10-29 13:04:19 +00:00
mwenzkowski
66ae58d62a cursor: fix uninitialized pointer in cursor_rebase 2018-10-28 17:33:27 +01:00
Drew DeVault
aa21d1b867
Merge pull request #3010 from Emantor/fix/cursor_warping_view_map
input-manager: consider cursor warping on input_manager_set_focus
2018-10-28 12:40:26 +01:00
Rouven Czerwinski
6f87d0c2cf input-manager: consider cursor warping on input_manager_set_focus
input_manager_set_focus is used to set the focus after mapping the view in
view_map. This needs to consider to warp the cursor as well, since for
WARP_CONTAINER, the cursor should warp to the newly created view.
2018-10-28 10:29:10 +01:00
Konstantin Kharlamov
cd3c2f4553 seat: don't traverse the list to check if it's empty
Found by introspection.

Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
2018-10-27 21:10:10 +03:00
Ryan Dwyer
63d076dc2a Fix focus after a non-visible workspace's last container is destroyed
The code being changed is responsible for updating the focus stack when
a container is destroyed in a different part of the tree to where the
real focus is. It's attempting to set focus_inactive to a sibling (or
parent if no siblings) of the container that is being destroyed, then
put our real focus back on the end of the focus stack.

The problem occurs when the container being destroyed is in a different
workspace. For example:

* Have a focused view on workspace 1
* Have workspace 2 not visible with a single view that is unmapping
* The first call to seat_set_raw_focus sets focus to workspace 2 because
it's the parent
* Prior to this patch, the second call to seat_set_raw_focus would set
focus to the view on workspace 1
* Later, when using output_get_active_workspace, this function would
return workspace 2 because it's the first workspace it finds in the
focus stack.

To fix this, workspace 1 must be placed on the focus stack between
workspace 2 and the focused view. That's what this patch does.

Lastly, it also uses seat_get_focus_inactive to choose the focus. This
fixes a crash when a view unmaps while a non-container is focused (eg.
swaylock), because focus is NULL.
2018-10-26 19:15:12 +10:00
Ryan Dwyer
60a1d79de7 Rebase the cursor after applying transactions
This approaches cursor rebasing from a different angle. Rather than
littering the codebase with cursor_rebase calls and using transaction
callbacks, this just runs cursor_rebase after applying every transaction
- but only if there's outputs connected, because otherwise it causes a
crash during shutdown.

There is one known case where we still need to call cursor_rebase
directly, and that's when running `seat seat0 cursor move ...`. This
command doesn't set anything as dirty so no transaction occurs.
2018-10-25 23:37:40 +10:00
Ryan Dwyer
641fbe576e When scrolling on a tab titlebar, set focus_inactive if not focused
For example, create layout H[view T[view view view]], focus the view in
the hsplit and scroll the mouse wheel over the tab title bars. Prior to
this patch, focus would be given to a descendant of the tabbed
container. This patch keeps the focus on the hsplit view.

This also renames some of the variables used in this part of the code to
make it be easier to follow.
2018-10-24 23:59:09 +10:00
Ryan Dwyer
9c965ec58c seat_update_capabilities: Set cursor image while we have the capability 2018-10-23 22:00:57 +10:00
Ryan Dwyer
450a0661d7 Fix dormant cursor when using multiple seats
The cursor's image would be removed or set when the seat's capabilities
were updated, but there was nothing to prevent the image from being set
at other times.
2018-10-23 21:38:30 +10:00
Ryan Dwyer
c5a6c37275 Make workspace back_and_forth seat-specific
* When using multiple seats, each seat has its own prev_workspace_name
for the purpose of workspace back_and_forth.
* Removes prev_workspace_name global variable.
* Removes unused next_name_map function in tree/workspace.c.
* Fixes memory leak in seat_destroy (seat was not freed).
2018-10-21 11:26:22 +10:00
Drew DeVault
551e05ba90
Merge pull request #2888 from RyanDwyer/remove-raise-floating
Remove raise_floating directive
2018-10-20 15:30:54 +02:00
Mihai Coman
3daf963d4d Fix crash when defaut seat is not created
Function input_manager_get_default_seat should always return a seat.
2018-10-20 11:48:49 +03:00
Ryan Dwyer
b9b1b0e566 Remove raise_floating directive
The directive controlled whether floating views should raise to the top
when the cursor is moved over it while using focus_follows_mouse. The
default was enabled, which is undesirable. For example, if you have two
floating views where one completely covers the other, the smaller one
would be inaccessible because moving the mouse over the bigger one would
raise it above the smaller one.

There is no known use case for having raise_floating enabled, so this
patch removes the directive and implements the raise_floating disabled
behaviour instead.
2018-10-20 17:51:32 +10:00
Ryan Dwyer
c006717910 Minor refactor of input manager
The input manager is a singleton object. Passing the sway_input_manager
argument to each of its functions is unnecessary, while removing the
argument makes it obvious to the caller that it's a singleton. This
patch removes the argument and makes the input manager use server.input
instead.

On a similar note:

* sway_input_manager.server is removed in favour of using the server
global.
* seat.input is removed because it can get it from server.input.

Due to a circular dependency, creating seat0 is now done directly in
server_init rather than in input_manager_create. This is because
creating seats must be done after server.input is set.

Lastly, it now stores the default seat name using a constant and removes
a second reference to seat0 (in input_manager_get_default_seat).
2018-10-20 13:11:43 +10:00
Drew DeVault
5b8257b88f
Merge pull request #2872 from RyanDwyer/cursor-rebase
Introduce cursor_rebase
2018-10-20 05:06:03 +02:00
Ryan Dwyer
9b828939e5 Fix crash when ending tiling drag
If the container being dragged has a parent that needs to be reaped, it
must be reaped after we've reinserted the dragging container into the
tree. During reaping, handle_seat_node_destroy tries to refocus the
dragging container which isn't possible while it's detached.
2018-10-20 08:57:09 +10:00
Ryan Dwyer
9ea71f292b Introduce cursor_rebase
This function "rebases" the cursor on top of whatever is underneath it,
without triggering any focus changes.
2018-10-19 22:47:54 +10:00
Ryan Dwyer
4d743b64d0 Fix logic used for mouse_warping output
Turns out we don't need to store the previous focus, and it should be
based on which output the cursor was in.
2018-10-19 22:28:02 +10:00
Drew DeVault
96e3686ae8
Merge pull request #2875 from RedSoxFan/input-device-bindings
cmd_bind{sym,code}: Implement per-device bindings
2018-10-19 14:00:03 +02:00
Ryan Dwyer
a2fdac2c4b Consider cursor warp when switching workspaces
Fixes a regression introduced in
24a90e5d86.

consider_warp_to_focus has been renamed to seat_consider_warp_to_focus,
moved to seat.c and made public. It is now called when switching
workspaces via `workspace <ws>`.
2018-10-19 08:00:13 +10:00
Brian Ashworth
2e637b7368 cmd_bind{sym,code}: Implement per-device bindings
bindsym --input-device=<identifier> ...
bindcode --input-device=<identifier> ...
2018-10-18 13:42:01 -04:00
Ryan Dwyer
24a90e5d86 Remove cursor warping from seat_set_focus
Because cursor warping was the default behaviour in seat_set_focus,
there may be cases where we may have been warping the cursor
unintentionally. This patch removes cursor warping from seat_set_focus
and only does it in the focus command. This is managed by a static
function in focus.c.

To know whether to warp or not, we need to know which node had focus
previously. To keep track of this easily, seat->prev_focus has been
introduced and is set to the previous in seat_set_focus.
2018-10-18 23:08:45 +10:00
Drew DeVault
765c80e5f7
Merge pull request #2820 from Emantor/fix-mouse-warping-container
Fix mouse warping container
2018-10-17 15:57:13 +02:00
Rouven Czerwinski
d69cf4c23c seat: use new warping functions for cursor warping during focus warp 2018-10-16 15:47:02 +02:00
Rouven Czerwinski
0969bf758b cursor: functions to warp cursor to container and workspace
The new functions allow a cursor to be warped without changing the focus.
This is a preparation commit to handle cursor warping not only in
seat_set_focus_warp.
2018-10-16 15:47:02 +02:00
Ryan Dwyer
05284b65db Prevent duplicate workspace::focus events
Previously we would compare the last focus's workspace with the new
focus's workspace to determine if we need to emit an IPC
workspace::focus event. This doesn't work when moving the focused
container to a new workspace.

This adds a workspace property to the seat which stores the last emitted
workspace::focus workspace. Using this method, after moving the
container, refocusing it will trigger exactly one workspace::focus
event: from the old workspace to the new workspace.
2018-10-16 08:17:24 +10:00
Ryan Dwyer
26278b694c Introduce seat_set_raw_focus and remove notify argument from seat_set_focus_warp
This introduces seat_set_raw_focus: a function that manipulates the
focus stack without doing any other behaviour whatsoever. There are a
few places where this is useful, such as where we set focus_inactive
followed by another call to set the real focus again. With this change,
the notify argument to seat_set_focus_warp is also removed as these
cases now use the raw function instead.

A bonus of this is we are no longer emitting window::focus IPC events
when setting focus_inactive, nor are we sending focus/unfocus events to
the surface.

This also fixes the following:

* When running `move workspace to output <name>` and moving the last
workspace from the source output, the workspace::focus IPC event is no
longer emitted for the newly created workspace.
* When splitting the currently focused container, unfocus/focus events
will not be sent to the surface when giving focus_inactive to the newly
created parent, and window::focus events will not be emitted.
2018-10-15 21:06:24 +10:00
Ian Fan
2f1fd80726 swaybar: show hidden bar on key event
Since wayland does not currently allow swaybar to create global
keybinds, this is handled within sway and sent to the bar using a custom
event, so as not to pollute existing events, called bar_state_update.
2018-10-14 13:33:12 +01:00
Thiago Mendes
8e147b3f1d
Add libinput send_events config for touch 2018-10-10 23:15:31 +02:00
Drew DeVault
5d19906556
Merge pull request #2806 from v-gu/add-libinput-support-for-keyboard
add libinput config for keyboard
2018-10-10 17:07:38 +02:00
Ryan Dwyer
ed33d95b6a
Merge branch 'master' into mouse-warping-container 2018-10-10 21:50:29 +10:00
Rouven Czerwinski
41991542ca Add mouse_warping container
This option always moves the cursor into the middle of the container if the warp
variable is true in seat_set_focus_warp.

Fixes #2577
2018-10-10 12:45:21 +02:00
Ryan Dwyer
416bb7a214 Fix floating click events
* Set focus to a floating container when clicking its title bar.
* Raise floating when user clicks title bar or decorations (in the
seat_begin functions).
* In container_at, it only returned a floating container if the user had
clicked the surface. This makes it use floating_container_at instead.
2018-10-10 16:58:32 +10:00
Vincent Gu
073aa4149f add libinput config for keyboard
add send_events support
2018-10-09 22:03:27 +08:00
Ryan Dwyer
f23588de3c Introduce container_is_transient_for 2018-10-08 23:00:36 +10:00
Ryan Dwyer
832ebc8966 Implement popup_during_fullscreen
This introduces a new view_impl function: is_transient_for. Similar to
container_has_ancestor but works using the surface parents rather than
the tree.

This patch modifies view_is_visible, container_at and so on to allow
transient views to function normally when they're in front of a
fullscreen view.
2018-10-08 22:49:59 +10:00
Ryan Dwyer
88a5e26c6e Remove unneeded variable 2018-10-08 20:40:47 +10:00
Ryan Dwyer
82423991a8 Reload config using idle event
This patch makes it so when you run reload, the actual reloading is
deferred to the next time the event loop becomes idle. This avoids
several use-after-frees and removes the workarounds we have to avoid
them.

When you run reload, we validate the config before creating the idle
event. This is so the reload command will still return an error if there
are validation errors. To allow this, load_main_config has been adjusted
so it doesn't apply the config if validating is true rather than
applying it unconditionally.

This also fixes a memory leak in the reload command where if the config
failed to load, the bar_ids list would not be freed.
2018-10-08 19:28:53 +10:00
Ryan Dwyer
c620f76bea Move sticky containers when switching workspace via criteria
* Create a view on workspace 1
* Switch to workspace 2 (on the same output) and create a floating
sticky view
* Use criteria to focus the view on workspace 1

Previously, we only moved the sticky containers when using
workspace_switch, but the above method of focusing doesn't call it. This
patch relocates the sticky-moving code into seat_set_focus_warp.

A side effect of this patch is that if you have a sticky container
focused and then switch workspaces, the sticky container will no longer
be focused. It would previously retain focus.

In seat_set_focus_warp, new_output_last_ws was only set when changing
outputs, but now it's always set. This means new_output_last_ws and
last_workspace might point to the same workspace, which means we have to
make sure we don't destroy it twice. It now checks to make sure they're
different, and to make this more obvious I've moved both calls to
workspace_consider_destroy to be next to each other.
2018-10-06 19:16:41 +10:00
Ryan Dwyer
44b550298e Fix crash when flattening container after moving
container_flatten removes the container from the tree (via
container_replace) before destroying it. When destroying, the recent
changes to handle_seat_node_destroy incorrectly assumes that the
container has a parent.

This adds a check for destroying a container which is no longer in the
tree. If this is the case, focus does not need to be changed.
2018-10-05 16:39:20 +10:00
Drew DeVault
eecebcafc6 Fix #2763 2018-10-04 15:00:18 -04:00
emersion
0d5c2f75b5
Merge pull request #2760 from RyanDwyer/swaylock-handle-output-disconnect
Give focus to another swaylock surface when output is disconnected
2018-10-04 14:18:13 +02:00
Ryan Dwyer
4feedbf7cf Ignore unrelated cursor buttons while doing seat operations
* Click and hold a scrollbar
* Drag the cursor onto another surface
* While still holding the original button, press and release another
cursor button
* Things get weird

There's two ways to fix this. Either cancel the seat operation and do
the other click, or continue the seat operation and ignore the other
click. I opted for the latter (ignoring the click) because it's easier
to implement, and I suspect a second click during a seat operation is
probably unintentional anyway.
2018-10-04 20:57:03 +10:00
Ryan Dwyer
32cb631143 Give focus to another swaylock surface when output is disconnected
* Have multiple outputs
* Launch swaylock
* Unplug an output (possibly has to be the last "connected" one)
* The swaylock surface on the remaining output would not respond to key
events

This was happening because when the output destroys, focus was not given
to the other swaylock surface.

This patch makes focus be transferred to another surface owned by the
same Wayland client, but only if input was inhibited by the surface
being destroyed, and only if it's in the overlay layer. I figure it's
best to be overly specific and relax the requirements later if needed.

This patch removes a check in seat_set_focus_surface which was
preventing focus from being passed from a layer surface to any other
surface. I don't know of a use case for this check, but it's possible
that this change could produce issues.
2018-10-04 19:36:19 +10:00
Jonathan Buch
7727d54faf
Fix focusing topmost floating windows
Re-focus on the container on which the cursor hovers over.  A
special case is, if there are menus or other subsurfaces open
in the focused container.  It will prefer the focused container
as long as there are subsurfaces.

This commit starts caching the previous node as well as the
previous x/y cursor position.  Re-calculating the previous
focused node by looking at the current state of the cursor
position does not work, if the environment changes.
2018-10-03 16:23:14 +02:00
Jonathan Buch
ec713125c6
Simplify raising a container in seat
* Factor out raising a floating window into s separate function to
  enable reuse.
2018-10-03 16:23:14 +02:00
Jonathan Buch
298ccb539c
Add configuration for raising containers on focus
* New configuration option: raise_floating
  (From the discussion on https://github.com/i3/i3/issues/2990)
* By default, it still raises the window on focus, otherwise it
  will raise the window on click.
2018-10-03 16:23:12 +02:00
Ryan Dwyer
5dd535b67a Add sanity check for empty focus stack 2018-10-03 22:09:20 +10:00
Drew DeVault
06c214a800
Merge pull request #2703 from RyanDwyer/csd-border
Add CSD to border modes
2018-10-03 13:03:06 +02:00
Ryan Dwyer
677e112733 Set focus_inactive on a sibling when a container closes in an inactive workspace
To reproduce the problem, create layout
H[view V[view view view-focused]], then switch to another workspace and
have the previously focused view in the vsplit close (eg. using
criteria, or an mpv video finishing). Return to the workspace using
`$mod+<num>` and the entire vsplit would be focused. This happens
because handle_seat_node_destroy would only set a new focus if the
currently focused view or a parent was being destroyed. To fix it, it
needs to set a sibling of the destroying container to focus_inactive
regardless of the current focus, then restore current focus if needed.

This patch changes the function accordingly. Additionally:

* The function now makes an early return if the node being destroyed is
a workspace.
* set_focus has been renamed to needs_new_focus. This variable is true
if the head focus needs to be changed.
2018-10-02 15:45:20 +10:00
Brian Ashworth
742d1764a6 Fix smart gaps 2018-10-01 09:41:15 -04:00
Drew DeVault
8f6aca2166
Merge pull request #2725 from PumbaPe/add-tap-and-drag
Add tap and drag to sway-input
2018-09-30 13:44:11 +02:00
Arkadiusz Hiler
1e70f7b19e Turn funcs() into funcs(void)
If they really do not take undefined number of arguments.
2018-09-30 14:09:05 +03:00
emersion
a53171669a
Merge pull request #2698 from ianyfan/hide-cursor
Only show cursor if pointer configured
2018-09-29 14:32:05 +02:00
PP
ae2b70f59e add tap-and-drag setting to sway-input 2018-09-29 11:49:41 +02:00
Ryan Dwyer
7b138e5ef0 Add CSD to border modes
This replaces view.using_csd with a new border mode: B_CSD. This also
removes sway_xdg_shell{_v6}_view.deco_mode and
view->has_client_side_decorations as we can now get these from the
border.

You can use `border toggle` to cycle through the modes including CSD, or
use `border csd` to set it directly. The client must support the
xdg-decoration protocol, and the only client I know of that does is the
example in wlroots.

If the client switches from SSD to CSD without us expecting it (via the
server-decoration protocol), we stash the previous border type into
view.saved_border so we can restore it if the client returns to SSD. I
haven't found a way to test this though.
2018-09-27 22:51:37 +10:00
Drew DeVault
5912be46c3
Merge pull request #2704 from ianyfan/tablet-config
input: enable configuring tablets with libinput
2018-09-27 02:07:15 -05:00
Alexander Bakker
d129108cdd Add a missing null check for moving tiling containers 2018-09-25 22:19:46 +02:00
Ian Fan
6194a445d3 input: enable configuring tablets with libinput 2018-09-24 12:49:20 +01:00
Ian Fan
a10fef9ae8 cursor: allow cursor_set_image to accept a NULL image to hide cursor 2018-09-24 12:34:09 +01:00
Ian Fan
dafb0526d7 seat: only show cursor if pointer configured 2018-09-24 10:55:42 +01:00
Brian Ashworth
baeb28ea62 Implement support for input wildcard 2018-09-23 19:56:52 -04:00
Ryan Dwyer
271b24ddfb Fix GtkMenuBar always opening first item
It seems like advertising that we support touch when we don't, while
using SSD, makes GtkMenuBar misbehave. Please don't ask me why...
2018-09-23 22:00:18 +10:00
Ryan Dwyer
bf5933c501 Implement tab cycling using mouse wheel
Firstly, a change had to be made to the container_at functions. If you
create layout `T[view H[view view]]` and hover the second tab, the
container_at functions would return the focus_inactive child. They now
return the split container itself. To compensate for this,
dispatch_cursor_button has been adjusted to find the focus_inactive
child before focusing it.

The actual implementation of wheel scrolling is pretty straightforward.
This uses handle_cursor_axis, so I took a similar approach to
handle_cursor_button (ie. creating a dispatch_cursor_axis function).
2018-09-22 10:42:59 +10:00
Ryan Dwyer
f6e218a643 Rename seat_get_active_child to seat_get_active_tiling_child
Also renames container to con in one function to prevent ugly line
wrapping.
2018-09-16 22:01:54 +10:00
Ryan Dwyer
48bc15e758 Make seat_get_active_child ignore floating children
seat_get_active_child is used to get the active tiling child in a few
places, such as outputs getting their active workspace and
tabbed/stacked containers getting their visible child. When a workspace
uses a tabbed or stacked layout and contains a focused floating view,
calling seat_get_active_child on the workspace would incorrectly return
the floating view. This changes it so it will return the tiling child.

This fixes the following bug:

* Create layout T[view view] then float one of the views
* Attempt to click the tiling view to give it focus - it wouldn't work
because seat_get_active_child would return the floating view
2018-09-16 21:57:19 +10:00
emersion
7699c5444c Update for swaywm/wlroots#1243 2018-09-14 19:21:44 +02:00
Ryan Dwyer
679c7eb08c Minor fixes to tiling drag implementation
* Make container_add_sibling's `after` argument a boolean.
* Use a constant for drop layout border
* Make thickness an int
* Add button state check
* Move comments in seat_end_move_tiling
2018-09-12 08:46:46 +10:00
Ryan Dwyer
403905c11b Fix line length 2018-09-11 23:24:57 +10:00
Ryan Dwyer
8bb40c24c7 Implement tiling drag
Hold floating_modifier and drag a tiling view to a new location.
2018-09-11 21:34:21 +10:00
Ryan Dwyer
d4e80cf301 Rename OP_MOVE to OP_MOVE_FLOATING
In preparation for introducing OP_MOVE_TILING.
2018-09-11 16:56:05 +10:00
Drew DeVault
030b5bc024
Merge pull request #2603 from emersion/fix-dnd
Fix drag-and-drop
2018-09-07 11:09:02 -04:00
emersion
251a7ebc4b Fix drag-and-drop 2018-09-07 15:43:15 +02:00
Ryan Dwyer
763554e1be Fix workspace switching
The output also needs to be made dirty when focusing a new output.
2018-09-07 08:08:40 +10:00
Ryan Dwyer
f30527e0cd Don't dirty outputs unnecessarily 2018-09-06 23:25:10 +10:00
Ryan Dwyer
5896781df4 Make outputs dirty when changing focus
Fixes a workspace switch bug introduced by
5967ee1fbc.
2018-09-06 21:15:24 +10:00
Ryan Dwyer
908095ef9a Introduce seat_set_focus_container and seat_set_focus_workspace
These are the same as seat_set_focus, but accept a specific type rather
than using nodes. Doing this adds more typesafety and lets us avoid
using &con->node which looks a little ugly.

This fixes a crash that pretty much nobody would ever come across. If
you have a bindsym for "focus" with no arguments and run it from an
empty workspace, sway would crash because it assumes `container` is not
NULL.
2018-09-06 19:26:56 +10:00
emersion
bea9f9c63f
Merge pull request #2578 from RyanDwyer/fix-binding-reload
Fix management of bindings during reload
2018-09-06 10:41:49 +02:00
Ryan Dwyer
5cc70d1dfd Restore focus correctly when closing a fullscreen view
We weren't calling seat_send_focus. I think this was previously called
by seat_set_focus_warp.
2018-09-06 09:33:37 +10:00
Ryan Dwyer
32c7386b0f Fix management of bindings during reload
seat_execute_command needs to check the flags on `binding_copy`, as
`binding` will be a dangling pointer after a reload command.

handle_keyboard_key needs to set the next_repeat_binding for
non-reloads prior to executing the command in case the binding is
freed by the reload command.
2018-09-06 08:33:00 +10:00
Ryan Dwyer
6f71749398 Fix clicking workspace buttons
Because node_at_coords was returning the workspace's node, it
interpreted this as clicking the focused workspace which was a no op.
2018-09-05 18:01:43 +10:00
Ryan Dwyer
e5c9204b49 Focus empty workspace when clicking it
Also removes container_at_coords as this function is no longer
necessary.
2018-09-05 18:01:43 +10:00
Ryan Dwyer
4e0452fce3 Fix scratchpad related crashes
* Was crashing when a view was moved to the scratchpad (prev focus had
no parent).
* Was crashing when a hidden scratchpad view unmaps because it has no
workspace.
2018-09-05 18:01:43 +10:00
Ryan Dwyer
fb9b0f7a08 Fix focus bug
When changing focus from a view in one workspace to an empty workspace
using `focus <direction>`, the view in the previous workspace would keep
focused styling. This is because the check to unfocus it was only done
in the container case and not workspace case, so it's been moved out of
both.
2018-09-05 18:01:43 +10:00
Ryan Dwyer
eccfcde2eb Fix crash when moving mouse over a fullscreen split container 2018-09-05 18:01:43 +10:00
Ryan Dwyer
2aa6afae54 Fix mouse_warping 2018-09-05 18:01:43 +10:00
Ryan Dwyer
7586f150c0 Implement type safe arguments and demote sway_container
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.

In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.

If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.

There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.

In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.

The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.

The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.

Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.

Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.

In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.

container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.

`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.

container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.

There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.

The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
2018-09-05 18:01:43 +10:00
Ryan Dwyer
7797490e9e Deny repeating reload by holding key
Fixes #2568

The binding that gets stored in the keyboard's `repeat_binding` would
get freed on reload, leaving a dangling pointer.

Rather than attempt to unset the keyboard's `repeat_binding` along with
the other bindings, I opted to just not set it for the reload command
because there's no point in reloading repeatedly by holding the binding.
This disables repeat bindings for the reload command.

As we now need to detect whether it's a reload command in two places,
I've added a binding flag to track whether it's a reload or not.
2018-09-04 20:00:04 +10:00
Drew DeVault
80270ba086
Merge pull request #2544 from RyanDwyer/fix-deferred-cmd-crash
Fix crash when running deferred commands
2018-09-01 13:00:26 -04:00
Ryan Dwyer
dce549c537 Don't send never-ending transactions when a focused layer surface commits
This moves the arrange_windows call into the arrange_layers function,
where we know the output actually needs to be arranged.

Additionally, we shouldn't set focus to the parent of an unknown
container type, because the parent may be an output and this causes a
crash because outputs can't have direct focus.

Fixes #2543
2018-08-31 21:39:28 +10:00
Ryan Dwyer
1e0459f7f7 Fix crash when running deferred commands
Fixes #2541
2018-08-31 19:49:12 +10:00
Ian Fan
3bf849d993 seat.c: clean-up seat_set_focus_warp function 2018-08-27 13:25:01 +01:00
Ryan Dwyer
5dbbab7bdc Remove layout.c
When we have type safety we'll need to have functions for
workspace_add_tiling and so on. This means the existing container
functions will be just for containers, so they are being moved to
container.c. At this point layout.c doesn't contain much else, so I've
relocated everything and removed the file.

* container_swap and its static functions have been moved to the swap
command and made static.
* container_recursive_resize has been moved to the resize command and
made static.
* The following have been moved to container.c:
    * container_handle_fullscreen_reparent
    * container_insert_child
    * container_add_sibling
    * container_add_child
    * container_remove_child
    * container_replace_child
    * container_split
* enum movement_direction and sway_dir_to_wlr have been moved to util.c.

Side note: Several commands included layout.h which then included
root.h. With layout.h gone, root.h has to be included by those commands.
2018-08-26 12:05:16 +10:00
Ryan Dwyer
b6058703fa Refactor destroy functions and save workspaces when there's no outputs
This changes the destroy functions to the following:

* output_begin_destroy
* output_destroy
* workspace_begin_destroy
* workspace_destroy
* container_begin_destroy
* container_destroy
* view_begin_destroy
* view_destroy

The terminology was `destroy` and `free`, and it has been changed to
`begin_destroy` and `destroy` respectively.

When the last output is disconnected, its workspaces will now be stashed
in the root. Upon connection of a new output they will be restored.

There is a new function `workspace_consider_destroy` which decides
whether the given workspace should be destroyed or not (ie. empty and
not visible).

Calling container_begin_destroy will no longer automatically reap the
parents. In some places we want to reap the parents and in some we
don't, so this is left to the caller.

container_reap_empty_recursive and container_reap_empty have been
combined into one function and it will recurse up the tree.
2018-08-24 22:17:28 +10:00
Ryan Dwyer
f129b1b89f Replace enum resize_edge with wlr_edges 2018-08-21 12:41:57 +10:00
Ryan Dwyer
2b5a404ac9 Replace hacky L_FLOATING container with a list
Workspaces previously had a magical `workspace->floating` container,
which had a layout of L_FLOATING and whose children were actual floating
views. This allowed some conveniences, but was a hacky solution because
the container has to be exempt from focus, coordinate transactions with
the workspace, and omit emitting IPC events (which we didn't do).

This commit changes it to be a list directly in the sway_workspace. The
L_FLOATING layout is no longer used so this has been removed as well.

* Fixes incorrect check in the swap command (it checked if the
containers had the L_FLOATING layout, but this layout applied to the
magical container).
* Introduces workspace_add_floating
2018-08-19 16:18:33 +10:00
Ryan Dwyer
d6cd79c342 Implement iterators per container type
This introduces the following `for_each` functions:

* root_for_each_workspace
* root_for_each_container
* output_for_each_workspace
* output_for_each_container
* workspace_for_each_container

And introduces the following `find` functions:

* root_find_output
* root_find_workspace
* root_find_container
* output_find_workspace
* output_find_container
* workspace_find_container
* container_find_child

And removes the following functions:

* container_descendants
* container_for_each_descendant
* container_find

This change is preparing the way for demoting sway_container. Eventually
these functions will accept and return sway_outputs, sway_workspaces and
sway_containers (meaning a C_CONTAINER or C_VIEW).

This change also makes it easy to handle abnormalities like the
workspace floating list, root's scratchpad list and (once implemented)
root's saved workspaces list for when there's no connected outputs.
2018-08-18 23:38:54 +10:00
Drew DeVault
d4a32800d5
Merge pull request #2460 from RyanDwyer/implement-mousedown
Implement mousedown operation
2018-08-18 09:32:04 -04:00
Ryan Dwyer
d22420689d Fix mod+resize
Fixes #2479.

It was missing a mod_pressed check.

This also moves the parent traversal into the `if` block.
2018-08-18 17:50:37 +10:00
Ryan Dwyer
07a897b3b7 Don't send motion if the cursor hasn't moved
Prevents GTK+ comboboxes from immediately closing.
2018-08-18 09:29:18 +10:00
Ryan Dwyer
b637b61a7a Rename mousedown to down and make seat operation a named enum 2018-08-18 09:18:32 +10:00
Ryan Dwyer
a36625a482 Implement mousedown operation
This allows you to move the cursor off the surface while dragging its
scrollbar.
2018-08-18 09:18:32 +10:00
Ryan Dwyer
3a888163a0 Refactor seat_get_focus functions
Fixes #2467.

This commit introduces seat_get_focus_inactive_floating to supplement
seat_get_focus_inactive_tiling, and uses it during `focus mode_toggle`
which fixes a focus bug.

This also refactors the seat_get_focus_inactive functions so that they
do their selection logic themselves rather than offloading it to
seat_get_focus_by_type which was getting bloated. seat_get_focus_by_type
is now removed.

Lastly, this commit changes seat_get_focus to just return the first
container in the focus stack rather than looping and calling
seat_get_focus_by_type.
2018-08-17 17:32:53 +10:00
Ryan Dwyer
4d023c0390 Make mod+resize a floating container resize the container itself
Rather than resizing the split within the container.
2018-08-12 10:45:54 +10:00
Ryan Dwyer
e9d46ccbdd Use col-resize and row-resize cursor images 2018-08-12 10:45:54 +10:00
Ryan Dwyer
1893515d3a Fix right-click/popups and add state checks 2018-08-12 10:45:54 +10:00
Ryan Dwyer
2dceae6224 Allow resizing tiled views via mod key 2018-08-12 10:45:54 +10:00
Ryan Dwyer
f4280e506b Refactor dispatch_cursor_button
There was a separate function dispatch_cursor_button_floating which
dealt with the resize and move operations, but as resize is not really
limited to floating views, it doesn't make as much sense to have this
separate. So both functions are now combined into one.

Additionally, dispatch_cursor_button now uses a pattern of returning
early instead of using else-ifs.
2018-08-12 10:45:54 +10:00
Ryan Dwyer
b4a0363d17 Implement resizing tiled containers via cursor
* The OP_RESIZE seat operation has been renamed to OP_RESIZE_FLOATING,
and OP_RESIZE_TILING has been introduced.
* Similar to the above, seat_begin_resize and handle_resize_motion have
been renamed and tiling variants introduced.
* resize.c's resize_tiled has to be used, so container_resize_tiled has
been introduced in resize.c to allow external code to call it.
2018-08-12 10:45:54 +10:00
Drew DeVault
2aa6d98c5a
Merge pull request #2449 from RyanDwyer/remove-bfs
Remove container_for_each_descendant_bfs
2018-08-11 08:29:34 -04:00
Ryan Dwyer
4ad1ccc9dc Remove container_for_each_descendant_bfs
The function was not used.

Also renames container_for_each_descendant_dfs to just
container_for_each_descendant.
2018-08-11 15:57:09 +10:00
Ryan Dwyer
31844bf42b Remove container_has_child
In all cases you can use container_has_ancestor with the arguments
swapped, which is faster than container_has_child.
2018-08-11 15:36:19 +10:00
Ryan Dwyer
f5dc3ac09d Don't call send_pointer_notify_button when doing move or resize 2018-08-08 22:32:59 +10:00
Ryan Dwyer
4c5dc6f135 Focus floating views when beginning move/resize operations 2018-08-08 22:28:13 +10:00
Ryan Dwyer
a0649190de Fix edge cases when moving floating container to new workspace
* Removes container_floating_move_to_container, instead opting to put
that logic in container_move_to
* In the seat code, focusing a floating view now updates the pending
state only and lets the next transaction carry it over to the current
state. This is required, otherwise it would crash.
* When unfullscreening a floating container, an output check is now done
to see if it should center it.
2018-08-08 08:48:20 +10:00
Ryan Dwyer
c17f0870ef Fix crash when moving cursor over a fullscreen split container
Calling container_at_view fails an assertion if the container isn't a
view. Calling tiling_container_at works correctly, as that function
checks if the container is a view and calls container_at_view if so.
2018-08-03 18:08:20 +10:00
emersion
b336564511 Fix pointer events for fullscreen views 2018-08-02 22:48:43 +01:00
minus
e72f86784c Fix crash on mouse motion on fullscreen container
container_at expects a workspace, not the fullscreened container.
Fixes #2409
2018-08-02 23:19:01 +02:00
Ryan Dwyer
8392eae40f Revert "Revert "Fix popups""
This reverts commit 9aa258d33a.

Reverting the revert, so that popups can be fixed.
2018-08-02 23:36:36 +10:00
Drew DeVault
9aa258d33a Revert "Fix popups"
This reverts commit de86d65627.
2018-08-02 09:05:46 -04:00
Ryan Dwyer
9339026a31 Fix focus related crashes
* seat_set_focus_warp lacked a container NULL check
* view mapping code needs to use seat_get_focus_inactive

Also, seat_set_focus_warp triggered the wrong IPC event if focus was a
workspace, which resulted in swaybar not showing the workspace as
active.
2018-08-02 21:55:37 +10:00
Drew DeVault
9564c73c0d
Merge pull request #2391 from RyanDwyer/fix-popups-v2
Fix popups (v2)
2018-08-01 22:02:12 -04:00
Ian Fan
03eaf444a4 ipc: prevent emitting a workspace::focus event when moving a container to a different workspace or output
When a container is moved from, say, workspace 1 to workspace 2, workspace 2 is focused in order to arrange the windows before focus is moved back to workspace 1, which caused a workspace:focus event from workspace 2 to workspace 1 to be emitted. This commit inhibits that event.
2018-08-01 16:57:15 +01:00
Ian Fan
b2ac234569 ipc: fix workspace::focus event behaviour 2018-08-01 16:57:15 +01:00
Ian Fan
dd1d6255f0 ipc: add window::focus event 2018-08-01 16:57:14 +01:00
chr0me
77d74dd34f XCursor is not configured if no pointer device is available 2018-08-01 23:27:36 +08:00
Ryan Dwyer
7a59508da4 Close popups when changing focus
Also reverts the send frame done changes from the previous commit.
2018-07-31 19:58:34 +10:00
Ryan Dwyer
de86d65627 Fix popups
Fixes the render and container_at order for popups.

Fixes #2210

For rendering:

* render_view_surfaces has been renamed to render_view_toplevels
* render_view_toplevels now uses output_surface_for_each_surface (which
is now public), as that function uses wlr_surface_for_each_surface which
doesn't descend into popups
* Views now have a for_each_popup iterator, which is used by the
renderer to render the focused view's popups
* When rendering a popup, toplevels (xdg subsurfaces) of that popup are
also rendered

For sending frame done, the logic has been updated to match the
rendering logic:

* send_frame_done_container no longer descends into popups
* for_each_popup is used to send frame done to the focused view's popups
and their child toplevels

For container_at:

* floating_container_at is now static, which means it had to be moved
higher in the file.
* container_at now considers popups for the focused view before checking
containers.
* tiling_container_at has been introduced, so that it doesn't call
container_at recursively (it would check popups recursively if it did)
2018-07-31 18:41:30 +10:00
frsfnrrg
8dbbfa5965 Bindings use advised keyboard repeat parameters
Now 'repeat_delay' and 'repeat_rate' control the initial delay
and rate (per second) of repeated binding invocations.

If the repeat delay is zero, binding repetition is disabled.
When the repeat rate is zero, the binding is repeated exactly
once, assuming no other key events intervene.
2018-07-29 19:15:10 -04:00
frsfnrrg
e33dfbfa75 Implement key repeat for pressed key bindings
Each sway_keyboard is provided with a wayland timer event source.
When a valid keypress binding has been found, a callback to
handle_keyboard_repeat is set. Any key event will either clear
the callback or (if the new key event is a valid keypress binding)
delay the callback again.
2018-07-29 19:15:02 -04:00
emersion
5af776e734
Merge pull request #2376 from swaywm/virtual-keyboard
Add virtual keyboard protocol
2018-07-29 13:59:54 +01:00
Drew DeVault
1e65439a54 Add virtual keyboard protocol
Ref #2373
2018-07-28 20:47:56 -04:00
Geoff Greer
30fee94354 Don't enable numlock by default. This fixes an annoying issue where laptop keyboards would have 'numlock mode' enabled, remapping parts of the alphabet to numbers. 2018-07-28 16:22:20 -07:00
Drew DeVault
53069f1403
Merge pull request #2360 from RyanDwyer/floating-containers
Allow containers to float
2018-07-28 09:30:12 -04:00
Ryan Dwyer
da2a87f6c7 When unfloating, return container to previously focused tiled container
This introduces seat_get_focus_inactive_tiling and updates
`focus mode_toggle` to use it instead, because the previous method
wasn't guaranteed to return a tiling view.
2018-07-28 22:41:04 +10:00
Ryan Dwyer
0b6b6716e2 Fix clicking a floating split container
It would focus the split container rather than the child.

This commit makes it track the child and the split container separately
and send the surface click to the child.
2018-07-28 22:41:04 +10:00
Ryan Dwyer
08cfba2192 Allow containers to float
Things worth noting:

* When a fullscreen view unmaps, the check to unset fullscreen on the
workspace has been moved out of view_unmap and into container_destroy,
because containers can be fullscreen too
* The calls to `container_reap_empty_recursive(workspace)` have been
removed from `container_set_floating`. That function reaps upwards so it
wouldn't do anything. I'm probably the one who originally added it...
* My fix (b14bd1b0b1) for the tabbed child
crash has a side effect where when you close a floating container, focus
is not given to the tiled container again. I've removed my fix and
removed the call to `send_cursor_motion` from `seat_set_focus_warp`. We
should consider calling it from somewhere earlier in the call stack.
2018-07-28 22:41:04 +10:00
Ryan Dwyer
a4bcddcfdc Include errno.h 2018-07-28 22:40:43 +10:00
Ryan Dwyer
d6daf10cad Show errno description in log 2018-07-28 22:40:43 +10:00
Ryan Dwyer
32663b7b01 Handle out-of-fd situations gracefully for transaction and urgent timers 2018-07-28 22:40:43 +10:00
Ryan Dwyer
27a20a4884 Allow containers to be fullscreen 2018-07-26 08:27:07 +10:00
ProgAndy
76ece5788b Fix LEDs for configured modifier states 2018-07-25 17:24:45 +02:00
ProgAndy
2166dbe2e4 Implement setting NumLock and CapsLock status
After setting the keymap, try to enable NumLock and disable CapsLock.
This only works if sway has the xkb master state and controls the keyboard.
Prepare configuration settings for later use as well.
2018-07-25 17:24:45 +02:00
Drew DeVault
fc718f629a
Merge pull request #2350 from ppascher/xwayland-optional
Added meson option to allow building sway without xwayland support
2018-07-25 08:27:40 -04:00
Pascal Pascher
f95cb9a7c1 reverted includes of "sway/config.h" and replaced with "config.h" from meson build 2018-07-25 13:32:20 +02:00
Pascal Pascher
79a45d4a40 more style fixes, included "sway/config.h" where needed 2018-07-25 12:17:10 +02:00
Ryan Dwyer
b14bd1b0b1 Fix crash when closing last child of a tabbed container
The crash only occurs if the mouse cursor is above the tabbed container
when the last child is closed.

Introduced in 03d49490cc, over a week ago
and unnoticed until now :O

The above commit changes the behaviour of a focus change. When you
change focus, it sends pointer motion which makes the client set a new
cursor image. We already had this behaviour for workspace switching, but
this commit adds it for view switching too, such as in a tabbed
container or when closing a view.

The sequence of events that leads to the crash is:

* The last child of a tabbed container unmaps, which triggers a
`destroy` event before we've cleaned up the child or reaped the tabbed
container.
* The seat code listens to the `destroy` event and removes the seat
container from the focus stack. As part of this, it decides to set focus
to the parent (my fix alters this decision).
* When setting focus to the new parent, the container motion is sent as
per the previously mentioned commit.
* The motion code uses `container_at`, which encounters the tabbed
container and its child in a half destroyed state, and everything blows
up from there.

`con->parent` is needed because scratchpad containers don't have parents
if they're hidden, so this probably fixes a crash when a hidden
scratchpad container closes too.

The `con->parent->children->length > 1` check should catch any cases
where the parent is about to be reaped.
2018-07-25 19:26:12 +10:00
Brian Ashworth
3a75bb7f32 Change button var passed to seat_begin_move 2018-07-24 18:52:54 -04:00
Brian Ashworth
dca02944ce Implement floating_modifier <mod> [inverse|normal] 2018-07-24 18:41:08 -04:00
Pascal Pascher
2bf893248a style fixes, exclude sway/desctop/xwayland.c when enable_xwayland: false 2018-07-24 23:37:41 +02:00
Pascal Pascher
24ad1c3983 Added meson option "enable_xwayland" (default: true) to enable/disable xwayland support 2018-07-24 22:16:06 +02:00
Ryan Dwyer
2f1b84a0f3 Fix crash when clicking certain surfaces
cont was NULL.
2018-07-24 21:12:24 +10:00
Ryan Dwyer
e7c10f1871 Make mod+resize work in any direction
This makes it so if you hold mod and right click on a surface to resize
it, the resize direction is chosen based on which quarter of the surface
you've clicked. The previous implementation only resized towards the
bottom right.
2018-07-24 20:20:00 +10:00
frsfnrrg
94dd8823a0 Invoke mouse bindings
The mouse binding logic is inspired/copied from the
keyboard binding logic; we store a sorted list of the
currently pressed buttons, and trigger a binding when
the currently pressed (or just recently pressed, in
the case of a release binding) buttons, as well as
modifiers/container region, match those of a given
binding.

As the code to execute a binding is not very keyboard
specific, keyboard_execute_command is renamed to
seat_execute_command and moved to where the other
binding handling functions are. The call to
transaction_commit_dirty has been lifted out.
2018-07-23 21:38:29 -04:00
frsfnrrg
754372c3de Parse mouse binding options
First, the existing sway_binding structure is given an
enumerated type code. As all flags to bindsym/bindcode
are boolean, a single uint32 is used to hold all flags.
The _BORDER, _CONTENTS, _TITLEBAR flags, when active,
indicate in which part of a container the binding can
trigger; to localize complexity, they do not overlap
with the command line arguments, which center around
_TITLEBAR being set by default.

The keyboard handling code is adjusted for this change,
as is binding_key_compare; note that BINDING_LOCKED
is *not* part of the key portion of the binding.

Next, list of mouse bindings is introduced and cleaned up.

Finally, the binding command parsing code is extended
to handle the case where bindsym is used to describe
a mouse binding rather than a keysym binding; the
difference between the two may be detected as late as
when the first key/button is parsed, or as early as
the first flag.  As bindings can have multiple
keycodes/keysyms/buttons, mixed keysym/button sequences
are prohibited.
2018-07-23 21:14:22 -04:00
Ryan Dwyer
0db6f2ef58 Fix some cases where the cursor doesn't update
cursor_set_image only uploads the named image if it doesn't match the
previous named image. This means when setting the cursor image to a
surface as given by a client, we have to clear the currently stored
image.
2018-07-24 09:09:49 +10:00
Brian Ashworth
44e218574f Add missing checks to fix 2339 2018-07-23 15:40:05 -04:00
Ryan Dwyer
d21d4b83a3 Set cursor when beginning resize and move operations 2018-07-22 23:10:19 +10:00
Ryan Dwyer
009b426024 Fix damage when shrinking a floating view using cursor 2018-07-22 23:10:19 +10:00
Ryan Dwyer
5ba2ae9c6a Implement request_move and request_resize for xwayland views
I discovered we have to send a click event when ending the move or
resize operation to make xwayland's requests work correctly.
2018-07-22 23:10:19 +10:00
Ryan Dwyer
3faceadffe Fix focus bug with floating containers 2018-07-22 23:10:19 +10:00
Ryan Dwyer
011d1ebfa4 Consider view's min/max sizes when resizing 2018-07-22 23:10:19 +10:00
Ryan Dwyer
9df660ee31 Store last button and use it when views request to move or resize 2018-07-22 23:10:19 +10:00
Ryan Dwyer
6767d8a593 Prevent re-uploading the same cursor image multiple times 2018-07-22 23:10:19 +10:00
Ryan Dwyer
0c87bff5d1 Replace static handle_end_operation with seat_end_mouse_operation 2018-07-22 23:10:19 +10:00
Ryan Dwyer
ff445cc855 Implement xdg shell request_move and request_resize events
Also does a few other related things:

* Now uses enum wlr_edges instead of our own enum resize_edge
* Now uses wlr_xcursor_get_resize_name and removes our own
find_resize_edge_name
* Renames drag to move for consistency
2018-07-22 23:10:19 +10:00
Ryan Dwyer
1b3b75a094 Use wlr_keyboard_get_modifiers 2018-07-22 23:10:19 +10:00
Ryan Dwyer
dd337127d8 Use separate function for choosing edge cursor 2018-07-22 23:10:19 +10:00
Ryan Dwyer
350e9ea929 Fix clicking xwayland menus 2018-07-22 23:10:19 +10:00
Ryan Dwyer
c299b6b5cd Use max multiplier when resizing while preserving ratio 2018-07-22 23:10:19 +10:00
Ryan Dwyer
2c6616050a Make mod + resize do it from the top left corner 2018-07-22 23:10:19 +10:00
Ryan Dwyer
3aadf944ae Use WLR_MODIFIER_SHIFT 2018-07-22 23:10:19 +10:00
Ryan Dwyer
9fbe13b9be Implement floating_modifier and mouse operations for floating views
This implements the following:

* `floating_modifier` configuration directive
* Drag a floating window by its title bar
* Hold mod + drag a floating window from anywhere
* Resize a floating view by dragging the border
* Resize a floating view by holding mod and right clicking anywhere on
the view
* Resize a floating view and keep aspect ratio by holding shift while
resizing using either method
* Mouse cursor turns into resize when hovering floating border or corner
2018-07-22 23:10:19 +10:00
Ryan Dwyer
37b33f92e8 Fix urgent timer logic and remove unnecessary header includes 2018-07-21 10:28:07 +10:00
Ryan Dwyer
c2ed3d8bd6 Implement force_display_urgency_hint
The directive sets the timeout before an urgent view becomes normal
again after switching to it from another workspace.

Also:

* When an xwayland surface removes the urgent hint while the timer is
active, we now ignore the request. This happens as soon as the view
receives focus, so it was effectively making the timer pointless.
* The timeout is now only applied when switching to it from another
workspace.
2018-07-21 10:28:07 +10:00
Ryan Dwyer
8533c35a9f Fix crash and render issues involving cursor_send_pointer_motion
Fixes #2303, as well as a crash.

To replicate the crash:

* Have multiple outputs
* In config: for_window [<criteria>] workspace foo
* Also in config: workspace foo output <left-output-name>
* Focus the right output, and ensure workspace foo doesn't exist
* Launch the app that triggers the criteria

When the view maps, it calls workspace_switch which calls
send_set_focus which calls cursor_send_pointer_motion which calls
transaction_commit_dirty. This call to transaction_commit_dirty is not
meant to happen at this time because the tree isn't guaranteed to be in
a consistent state, but I'm not sure how exactly this leads to the crash
or render issues.

In this case the transaction is already committed by the view
implementation's handle_map function. So the solution is to remove it
from cursor_send_pointer_motion and add it to the other functions in
cursor.c which call cursor_send_pointer_motion.
2018-07-19 19:49:50 +10:00
emersion
747725b8bb Don't unfocus when an override redirect window is mapped 2018-07-18 20:00:48 +01:00
emersion
03d49490cc Update cursor on focus change
This allows to send wl_pointer.enter when switching between views
in a split/tabbed layout for instance. This (1) updates the cursor
image accordingly (2) makes it unnecessary to move the mouse before
scrolling. It's harmless to always call cursor_send_pointer_motion
because in case the focused surface hasn't changed this is a no-op.

The `last_focus != NULL` condition is required otherwise
cursor_send_pointer_motion will crash when sway starts up (the
sway_output doesn't yet have a workspace).
2018-07-17 23:04:55 +01:00
Drew DeVault
d6bd314dff
Merge pull request #2276 from RyanDwyer/urgency
Implement urgency base functionality
2018-07-16 15:39:08 -07:00
Ryan Dwyer
9ca5cb7faf Fix tab split focus bug
Fixes a bug where if you have a tab containing a split, then switch from
a non-split tab to the split tab, focus is not changed properly.
2018-07-16 18:09:35 +10:00
Ryan Dwyer
315d5311b2 Implement urgency base functionality
Introduces a command to manually set urgency, as well as rendering of
urgent views, sending the IPC event, removing urgency after focused for
one second, and matching urgent views via criteria.
2018-07-16 08:19:25 +10:00
Ryan Dwyer
a120d4c79f Make focus part of transactions
Rather than maintain copies of the entire focus stack, this PR
transactionises the focus by introducing two new properties to the
container state and using those when rendering.

* `bool focused` means this container has actual focus. Only one
container should have this equalling true in its current state.
* `struct sway_container *focus_inactive_child` points to the immediate
child that was most recently focused (eg. for tabbed and stacked
containers).
2018-07-15 22:08:26 +10:00
Brian Ashworth
13c6627ddb Implement tap_button_map for input devices 2018-07-14 01:01:47 -04:00
Drew DeVault
bcdf04d79c
Merge pull request #2252 from rkubosz/scroll-button-option
feature: scroll button option for input devices
2018-07-13 04:07:11 -07:00
Ryan Dwyer
ee0e1b170e Fix crash in seat code
Container will be NULL if launching swaylock.
2018-07-12 14:43:08 +10:00
Robert Kubosz
41b80c28df
add scroll button option
This commit introduces a scroll_button option, which is intended to be
used with scroll_method. Now user can edit his sway config and add an
scroll_button option to device section.
2018-07-11 22:03:06 +02:00
dudemanguy
600c126150 fix crash on floating windows 2018-07-11 12:24:06 -05:00
Ryan Dwyer
15dc5286e2 Move floating windows to front when focused 2018-07-11 19:50:02 +10:00
emersion
63b4bf5000
Update for swaywm/wlroots#1126 2018-07-09 22:54:30 +01:00
emersion
b3c55dd909
Merge branch 'master' into leaks 2018-07-06 16:22:13 +01:00
Drew DeVault
3d2595b102
Merge branch 'master' into remove-input-fix 2018-07-06 06:28:01 -07:00
Ian Fan
f63b209d51 Attach destroy handler earlier
This prevents it from being bypassed when the device has no seat configuration
2018-07-06 14:13:45 +01:00
Brian Ashworth
c833ae64bc Fix pointer button events for layer surfaces 2018-07-05 23:01:35 -04:00
Dominique Martinet
8a771785ad keyboard: free xkb keymap on destroy 2018-07-05 08:13:10 +09:00
Ryan Dwyer
0bd41a0dae Fix focus related damage
When you have an unfocused container (so one view is focused_inactive),
and you focus any other view in that container, the view with
focused_inactive was not damaged. This is because we damaged the
previous focus and new focus, but needed to damage the parent of the new
focus.
2018-07-04 15:38:08 +10:00
Ryan Dwyer
1e4807efa0 Don't return pending children in seat_get_active_current_child
Fixes #2192.

seat_get_active_current_child is intended to return a child of the given
container which has finished its mapping transaction and is able to be
rendered on screen. The previous implementation was capable of returning
a pending child, which caused a child of a tabbed or stacked view to be
rendered prematurely while it was mapping.
2018-07-02 22:16:20 +10:00
Ryan Dwyer
a2fbb20a61 Merge remote-tracking branch 'upstream/master' into atomic 2018-06-29 20:04:24 +10:00
Armin Preiml
1eede432fc fix handling key modifiers if not pressed at first
fixes #2169
2018-06-28 15:23:26 +02:00
Ryan Dwyer
bf38081382
Merge branch 'master' into xwayland-wants-float 2018-06-27 13:21:00 +10:00
Tony Crisci
e9ad10c2d6 dont focus-follow-mouse when keyboard grab 2018-06-24 20:30:43 -04:00
Ryan Dwyer
32b865e610 Fix crash when deleting last child in a tabbed or stacked container
There was no `current` child because the container was destroyed. This
makes it fall back to looking in the parent's current children list.
2018-06-23 17:47:28 +10:00
emersion
cda66e9a26
Automatically float xwayland windows 2018-06-18 22:52:10 +01:00
frsfnrrg
ca061ba8bf Fix keyboard shortcut handling inconsistencies
* Ensure that modifier keys are identified even when the next key does
  not produce a keysym. This requires that modifier change tracking
  be done for each sway_shortcut_state.

* Permit regular and --release shortcuts on the same key combination.
  Distinct bindings are identified for press and release cases; note
  that the release binding needs to be identified for both key press
  and key release events.

* Maintain ascending sort order for the shortcut state list, and keep
  track of the number of pressed key ids, for simpler (and hence
  faster) searching of the list of key bindings.

* Move binding duplicate detection into get_active_binding to avoid
  duplicating error messages.
2018-06-12 20:26:57 -04:00
emersion
cfd02918c0
Render drag icons 2018-06-09 13:26:03 +01:00
Scott Leggett
609c420501 Initialise previous cursor position.
Fix the problem with focus jumping to the container under the cursor
when first starting sway.
2018-06-06 20:45:02 +10:00
Ryan Dwyer
bcdb676abb Don't set focus to NULL when clicking a surface which has no container 2018-06-04 11:31:25 +10:00
Ryan Dwyer
9253278328 Restore focus when unmapping layer shell surfaces 2018-06-04 11:31:07 +10:00
Ryan Dwyer
57e78414fa Fix seat_get_active_child
seat_get_active_child is used for tabbed and stacked containers to get
the active child. The previous implementation used seat_get_focus_inactive
then ascended the tree to the child of the tabbed/stacked container, but
this fails when the workspace itself is stacked or tabbed and the most
recently active child is floating.

The new implementation takes a more simple approach, where it directly
scans the focus stack for the first immediate child which isn't the
floating container.

Fixes #2098.
2018-06-03 22:31:54 +10:00
Brian Ashworth
7c810dc344 Make command block implementation generic 2018-06-02 08:07:44 -04:00
frsfnrrg
78b7b46895 Style fix, redundant entry removal, fix extra keysym delete 2018-06-01 18:52:36 -04:00
frsfnrrg
480f0c593c Rename update_shortcut_model to update_shortcut_state 2018-06-01 18:52:36 -04:00
frsfnrrg
83d559dd03 Rename check_shortcut_model to get_active_binding 2018-06-01 18:52:36 -04:00
frsfnrrg
c53e4e6cde Style fixed for keyboard.c 2018-06-01 18:52:36 -04:00
frsfnrrg
f2fe93d171 Remove almost-always redundant loop in key handling 2018-06-01 18:52:36 -04:00
frsfnrrg
a056419ad7 Rewrite shortcut handling code to avoid hardcoded values
The same shortcut algorithm is now used for keycodes,
raw keysyms, and translated keysyms. Pressed keysyms
are now stored in association with the keycodes that
generated them. Modifier keycodes (and associated
keysyms) are identified retroactively by the subsequent
change to the modifier flags.
2018-06-01 18:52:36 -04:00
Drew DeVault
e605dc43bb Fix mouse warping interaction with layout coords 2018-06-01 23:14:58 +10:00
Ryan Dwyer
e4e912ea91 Store swayc coordinates as layout-local 2018-06-01 23:14:58 +10:00
Ryan Dwyer
1f2e399ade Implement floating 2018-06-01 23:14:58 +10:00
Ryan Dwyer
7c7d24600b Fix ancestor typos 2018-05-28 12:45:42 +10:00
Drew DeVault
b2c0ba5b18
Merge pull request #2050 from smlx/focus-fix
Focus containers only on entry.
2018-05-27 15:42:39 -04:00
frsfnrrg
a78a5684ea Implement bindsym/bindcode --locked
Adds the --locked flag to bindsym and bindcode commands.

When a keyboard's associated seat has an exclusive client
(i.e, a screenlocker), then bindings are only executed if
they have the locked flag. When there is no such client,
this restriction is lifted.
2018-05-27 13:28:02 -04:00
Scott Leggett
4d8120ccf3 Improve comment. 2018-05-28 02:35:24 +10:00
Scott Leggett
b57f88e7db Avoid assert on container type. 2018-05-28 02:25:42 +10:00
Scott Leggett
1b8de39287 Move previous cursor_position inline. 2018-05-28 02:14:19 +10:00
Scott Leggett
d1ebbebea0 Remove unused function. 2018-05-28 01:38:46 +10:00
Scott Leggett
0039f7a4fd Simplify logic, remove redundant variables. 2018-05-28 01:38:46 +10:00
Scott Leggett
dd86444e59 Rely on view_is_visible rather thank walking the tree ourselves. 2018-05-28 01:38:46 +10:00
Scott Leggett
4cd304e4ba Store previous position in sway_cursor. 2018-05-28 01:37:43 +10:00
Scott Leggett
06098bef98 Focus containers only on entry. 2018-05-27 15:29:48 +10:00
Drew DeVault
fea654a6ce Replace oft-failing abort with if statement
Fixes #2045
2018-05-26 10:35:15 -04:00
Ivan Chebykin
464ec44b00
Check for next_focus before assert 2018-05-26 15:54:49 +03:00
Ivan Chebykin
6e6b0decd9
Fix usage of sway_assert 2018-05-26 15:51:36 +03:00
Ivan Chebykin
820a8c9c2d
Moved visibility check of of loop, added asserts 2018-05-26 13:34:14 +03:00
Ivan Chebykin
740234a4bc
Break after first tabbed/stacked layout 2018-05-25 17:45:41 +03:00
Ivan Chebykin
53516fa03f
Fix mouse focusing for horizontal/vertical views in tabbed containers 2018-05-25 17:22:25 +03:00
Ivan Chebykin
f85d3e15ba
Fixed styling issues 2018-05-25 16:54:43 +03:00
Ivan Chebykin
e19fe56e2f
Focus inactive container instead of checking cursor position 2018-05-25 16:54:43 +03:00
Ivan Chebykin
3b67253312
Skip all nested containers 2018-05-25 16:54:43 +03:00
Ivan Chebykin
c62efbb5ce
Implement correct focusing for tabbed containers 2018-05-25 16:54:43 +03:00
Ivan Chebykin
c1be4b0153
Fix focusing from other containers 2018-05-25 16:54:43 +03:00
Ivan Chebykin
87af08966a
Don't focus tabbed and stacked containers on mouseover 2018-05-25 16:54:43 +03:00
Drew DeVault
8bbf78fdd4 Fix focus follows mouse with no focus 2018-05-21 17:21:01 -04:00
Ryan Dwyer
efc07fb3d4 Don't track damage for views on inactive tabs 2018-05-21 20:16:56 +10:00
Ryan Dwyer
c08f9bf257 Implement tabbed layout 2018-05-21 20:16:56 +10:00