3 KiB
Quick Start Guide 03/27/2017 Egan Ford egan@sense.net
NOTE: READ ALL INSTRUCTIONS
Prereqs:
-
MacOS 10.12 64-bit:
- Install XQuartz, Xcode (from your installation media) in that order.
- Install Macports (macports.org), then:
sudo port install gtk2 pkgconfig gcc6
sudo port select --set gcc mp-gcc6
export PATH=/opt/local/bin:$PATH
- Ubuntu:
sudo apt-get install libgtk2.0-dev
- RedHat/CentOS:
sudo yum install subversion gtk2-devel
Start up X11 and use xterm
Download x49gp source:
git clone https://github.com/datajerk/x49gp.git
Edit FIRMWARE (optional):
The default firmware will be 4950_92.bin, for HPGCC3 development copy 49_hpgcc.bin in to x49gp and change FIRMWARE in the Makefile.
Build:
cd x49gp
make
make sdcard
make config
Mount SD card:
OS/X:
open sdcard.dmg
Linux:
sudo mkdir -p /Volumes/X49GP/
sudo mount -o loop sdcard /Volumes/X49GP
Put stuff in SD, e.g.:
OS/X:
cp BACKUP /Volumes/X49GP/
Linux:
sudo cp BACKUP /Volumes/X49GP/
NOTE: If using HPGCC2 don't forget the the ARMToolbox.
Eject SD:
OS/X:
hdiutil detach $(df | grep -i x49gp | head -1 | awk '{print $1}')
Linux:
sudo umount /Volumes/X49GP
Run:
./x49gp config
Where's the key labels?
Good question. This is a bug when compiled for 64-bit platforms.
Hack:
cp hp50g-hack.png hp50g.png
Do stuff, e.g.:
Restore backup:
BACKUP
3
->TAG
RESTORE
Install ARMToolbox (HPGCC2):
2
SETUP.BIN
3
->TAG
RCL
EVAL
(Right Click ON, Left Click C)
To Exit Emulator
- ctrl-c to exit (from launch window)
Start Over:
- clean slate?
rm -f flash-49g+ flash-50g flash-noboot sram s3c2410-sram
make flash-49g+ flash-50g flash-noboot sram s3c2410-sram
./newconfig
- soft reset only?
./newconfig
Known Limitations:
- HPGCC SD Card I/O
libfsystemunavailable.f*calls unstable (HPGCC2)f*calls stable (HPGCC3)
Change Log:
Additional note: August 22, 2013
Updated this so that it'll compile on Ubuntu 12.04.
--Nicholas Kirchner