Fixes an issue where an already visible scratchpad window being moved due to
'scratchpad show' leaves the entire workspace at the top of the focus stack in
the old workspace. Moving by 'focus output' back to the old workspace would
focus the entire workspace instead of just the last active container.
This makes the behavior of floating containers more consistent with i3.
The coordinates of the container are scaled when the size of the
workspace it is on changes or when the container is moved
between workspaces on different outputs.
For scratchpad containers, add a new state that preserves the dimensions
of the last output the window appeared on. This is necessary because
after a container is hidden in the scratchpad, we expect it to be in the
same relative position on the output when it reappears. We can't just
use the container's attached workspace because that workspace's
dimensions might have been changed or the workspace as a whole could
have been destroyed.
CAIRO_HINT_STYLE_FULL attempts to maximize contrast at the expense
of fidelity, this makes most fonts that haven't been hand hinted,
which makes up the majority of fonts out there, appear much worse.
In the absence of explicitly set hint style, cairo will default to
CAIRO_HINT_STYLE_SLIGHT, which attempts to improve contrast while
retaining fidelity to the original shapes, which is what we want.
When a window in the scratchpad container requests for
xdg_activation_v1, it is ignored no matter what the value of
focus_on_window_activation is.
At least allow windows in the scratchpad to set the urgent flag. When
focus_on_window_activation is set to "focus", show the parent scratchpad
where the contained requested for xdg_activation_v1.
Check whether output->damage_ring.current is empty before calling
wlr_output_attach_render(). Saves us from having to un-do that
via wlr_output_rollback().
Atm we got issue with the touch position sent to the clients. While
holding contact, leaving the initial container will continue to send
motion event to the client but with the new local position from the new
container.
This seatop goal is to send the position of the touch event, relatively
to the initial container layout position.
This function was already declared in container.h but defined in
commands/swap.c for some unknown reason. Everything in commands/ assumes
the handler context has been set appropriately by the command preludes
but this function snuck its way into seatop_* which doesn't set anything
in the handler context.
The fact that the seatop drag actions manipulate the focus without
custody of the seat means they are definitely very broken in multiseat.
With `hide_edge_borders both` (or at least `vertical`),
`window_rect.y` will equal `border_thickness` for SOME windows,
but it will be 0 for windows adjacent to top screen edge.
Therefore setting it to `border_thickness` is not sufficient.
This commit changes it to the actual y offset of content
into the container.
xdg-activation is now too strict in only allowing tokens with a seat to
activate a surface. Clients may rely on this behavior for urgency hints.
The seat argument is still useful in case the client does provide a seat
so we can activate it on the desired seat.
Fixes: 842609da64 (view: make request_activate take a seat, 2022-11-30)
The JSON field is named "active", but that's confusing for users:
`output disable` is the command which results in `active = false`
outputs. Use the same terminology in end-user messages.
Switch the default menu to wmeny (https://sr.ht/~adnano/wmenu),
a Wayland-native alternative to dmenu. This removes the dependency
on Xwayland for the default config.
wmenu is small (same scope as dmenu) and has the same flags as dmenu.
One downside is that it's not widely packaged by distributions yet.
We still depend on dmenu_path.
fixes#7394
Test cases:
* zwlr_output_configuration_head_v1_set_adaptive_sync 0->0, no change
* 0->1, enabled
* 1->0, disabled
* 1->1, no change
Similar tests with an incapable display resulted in `"Adaptive sync
failed, ignoring"` messages as expected.
Since [1], wlr_renderer_begin() can fail. Check its return value
and bail.
This fixes an assertion error (when begin() fails and then we try
to render something) after a GPU reset.
[1]: a541c9510a
And fix the fallout of the swaynag_destroy having evolved without
being tested:
* wl_display_disconnect was called too early
* `button_close` and `swaynag.details.button_details` needed to be
heap allocated, since they are added to swaynag.buttons, and all
entries of swaynag.buttons are freed in swaynag_destroy
* To keep things simpler, disconnect the lifetime of the 'Toggle details'
button text config setting from the button itself.
This change allows the tablet tool button to be used for floating mod
resize. In addition, it attempts to ensure that tablet tool events are
consistent such that tablet v2 events and pointer events will never be
interleaved, and such that the tool buttons count will never fall out of
sync and cause tool button emulation to break.
Some of this logic is similar to what is done for tablet tool tip, but
not quite identical, because of the complication that we have to deal
with multiple inputs that can overlap eachother.
Fixes#7036.
This might be the wrong fix, but the crash is happening because the ->data
field on an xwayland surface is NULL. A NULL data field is normal for
unmanaged surfaces, however it seems clients can do weird things: They can
create a cursor lock on a regular xwayland surface then make it unmanaged
by calling override_redirect. In this case, the xwayland server should
destroy the cursor lock, which is does, but does so in the wrong order
making it try to dereference a NULL pointer after sway has acknowledged
its new unmanaged status.
```
(gdb) bt full
0 0x000055fd91934861 in warp_to_constraint_cursor_hint (cursor=0x55fd93486c00)
at ../sway/input/cursor.c:1243
sy = 605
lx = 6.9527431433545762e-310
sx = 1272
view = 0x0
con = 0x7ffd1cdfe400
ly = -6.949595189996421e+59
constraint = 0x55fd93e7faa0
1 0x000055fd91934976 in handle_constraint_destroy (listener=0x55fd93f0fd58, data=0x55fd93e7faa0)
at ../sway/input/cursor.c:1266
sway_constraint = 0x55fd93f0fd30
constraint = 0x55fd93e7faa0
cursor = 0x55fd93486c00
2 0x00007fda8275bf6e in wl_signal_emit_mutable () at /usr/lib/libwayland-server.so.0
3 0x00007fda82e57016 in pointer_constraint_destroy (constraint=0x55fd93e7faa0)
at ../subprojects/wlroots/types/wlr_pointer_constraints_v1.c:49
4 0x00007fda82e570dc in pointer_constraint_destroy_resource (resource=0x55fd933cf8f0)
at ../subprojects/wlroots/types/wlr_pointer_constraints_v1.c:66
constraint = 0x55fd93e7faa0
5 0x00007fda8275d8ba in () at /usr/lib/libwayland-server.so.0
6 0x00007fda8275f6a9 in wl_resource_destroy () at /usr/lib/libwayland-server.so.0
7 0x00007fda82e56fb3 in resource_destroy (client=0x55fd93ea52e0, resource=0x55fd933cf8f0)
at ../subprojects/wlroots/types/wlr_pointer_constraints_v1.c:39
8 0x00007fda81d8f4f6 in () at /usr/lib/libffi.so.8
9 0x00007fda81d8bf5e in () at /usr/lib/libffi.so.8
10 0x00007fda81d8eb73 in ffi_call () at /usr/lib/libffi.so.8
11 0x00007fda8275aada in () at /usr/lib/libwayland-server.so.0
12 0x00007fda8275f01c in () at /usr/lib/libwayland-server.so.0
13 0x00007fda8275d9e2 in wl_event_loop_dispatch () at /usr/lib/libwayland-server.so.0
14 0x00007fda8275e197 in wl_display_run () at /usr/lib/libwayland-server.so.0
15 0x000055fd919264d3 in server_run (server=0x55fd919a3a80 <server>) at ../sway/server.c:320
16 0x000055fd91925457 in main (argc=1, argv=0x7ffd1cdfed98) at ../sway/main.c:411
verbose = false
debug = false
validate = false
allow_unsupported_gpu = false
config_path = 0x0
c = -1
```
