Additional note: August 22, 2013 Updated this so that it'll compile on Ubuntu 12.04. --Nicholas Kirchner Quick Start Guide 04/25/2010 Egan Ford NOTE: READ ALL INSTRUCTIONS Prereqs: * OS/X 10.6 64-bit: * Install X11, Xcode (from your installation media) in that order. * Install Macports (macports.org), then: ``` sudo port install gtk2 sudo port install pkgconfig ``` * Ubuntu 9.04 32-bit, 9.04 64-bit, 9.10 32-bit, 9.10 64-bit: ``` sudo apt-get install libgtk2.0-dev sudo apt-get install subversion ``` * RedHat/CentOS 5.4 64-bit, Fedora 12 64-bit: ``` sudo yum install subversion gtk2-devel ``` ------------------------------------------------------------------------ Start up X11 and use xterm ------------------------------------------------------------------------ Download x49gp source: ``` svn co http://x49gp.svn.sourceforge.net/svnroot/x49gp x49gp ``` ------------------------------------------------------------------------ Edit FIRMWARE (optional): The default firmware will be 4950_92.bin, for HPGCC3 development copy 49_hpgcc.bin in to x49gp and change FIRMWARE in the Makefile. ------------------------------------------------------------------------ Build: ``` cd x49gp make make sdcard make config ``` ------------------------------------------------------------------------ Mount SD card: OS/X: ``` open sdcard.dmg ``` Linux: ``` sudo mkdir -p /Volumes/X49GP/ sudo mount -o loop sdcard /Volumes/X49GP ``` ------------------------------------------------------------------------ Put stuff in SD, e.g.: OS/X: ``` cp BACKUP /Volumes/X49GP/ ``` Linux: ``` sudo cp BACKUP /Volumes/X49GP/ ``` NOTE: If using HPGCC2 don't forget the the ARMToolbox. ------------------------------------------------------------------------ Eject SD: OS/X: ``` hdiutil detach $(df | grep -i x49gp | head -1 | awk '{print $1}') ``` Linux: ``` sudo umount /Volumes/X49GP ``` ------------------------------------------------------------------------ Run: ``` ./x49gp config ``` ------------------------------------------------------------------------ Do stuff, e.g.: Restore backup: ``` BACKUP 3 ->TAG RESTORE ``` Install ARMToolbox (HPGCC2): ``` 2 SETUP.BIN 3 ->TAG RCL EVAL ``` (Right Click ON, Left Click C) ------------------------------------------------------------------------ To Exit Emulator * ctrl-c to exit (from launch window) ------------------------------------------------------------------------ Start Over: * clean slate? ``` rm -f flash-49g+ flash-50g flash-noboot sram s3c2410-sram make flash-49g+ flash-50g flash-noboot sram s3c2410-sram ./newconfig ``` * soft reset only? ``` ./newconfig ``` ------------------------------------------------------------------------ Known Limitations: * HPGCC SD Card I/O . libfsystem unavailable. . f* calls unstable (HPGCC2) . f* calls stable (HPGCC3)