CN= [ req_ext ] subjectAltName = @alt_names [ alt_names ] DNS.1 = DNS.2 = DNS.3 = EOF )) ``` ###### Convert DER to PEM ```bash ( _fd_der="cert.crt" ; _fd_pem="cert.pem" ; \ openssl x509 -in ${_fd_der} -inform der -outform pem -out ${_fd_pem} ) ``` ###### Convert PEM to DER ```bash ( _fd_der="cert.crt" ; _fd_pem="cert.pem" ; \ openssl x509 -in ${_fd_pem} -outform der -out ${_fd_der} ) ``` ###### Checking whether the private key and the certificate match ```bash (openssl rsa -noout -modulus -in private.key | openssl md5 ; openssl x509 -noout -modulus -in certificate.crt | openssl md5) | uniq ``` ___ ##### Tool: [gnutls-cli](https://gnutls.org/manual/html_node/gnutls_002dcli-Invocation.html) ###### Testing connection to remote host (with sni) ```bash gnutls-cli -p 443 google.com ``` ###### Testing connection to remote host (without sni) ```bash gnutls-cli --disable-sni -p 443 google.com ``` HTTP/HTTPS ##### Tool: [curl](https://curl.haxx.se) ```bash curl -Iks https://www.google.com ``` * `-I` - show response headers only * `-k` - insecure connection when using ssl * `-s` - silent mode (not display body) ```bash curl -Iks --location -X GET -A "x-agent" https://www.google.com ``` * `--location` - follow redirects * `-X` - set method * `-A` - set user-agent ```bash curl -Iks --location -X GET -A "x-agent" --proxy http://127.0.0.1:16379 https://www.google.com ``` * `--proxy [socks5://|http://]` - set proxy server ___ ##### Tool: [httpie](https://httpie.org/) ```bash http -p Hh https://www.google.com ``` * `-p` - print request and response headers * `H` - request headers * `B` - request body * `h` - response headers * `b` - response body ```bash http -p Hh --follow --max-redirects 5 --verify no https://www.google.com ``` * `-F, --follow` - follow redirects * `--max-redirects N` - maximum for `--follow` * `--verify no` - skip SSL verification ```bash http -p Hh --follow --max-redirects 5 --verify no --proxy http:http://127.0.0.1:16379 https://www.google.com ``` * `--proxy [http:]` - set proxy server Network ##### Tool: [ssh](https://www.openssh.com/) ###### Compare a remote file with a local file ```bash ssh user@host cat /path/to/remotefile | diff /path/to/localfile - ``` ###### SSH connection through host in the middle ```bash ssh -t reachable_host ssh unreachable_host ``` ###### Run command over ssh on remote host ```bash cat > cmd.txt << __EOF__ cat /etc/hosts __EOF__ ssh host -l user $(//" >/dev/null 2>&1 ; echo $? ``` * `` - set remote host * `` - set destination port ###### Read and write to TCP or UDP sockets with common bash tools ```bash exec 5<>/dev/tcp//; cat <&5 & cat >&5; exec 5>&- ``` ___ ##### Tool: [tcpdump](http://www.tcpdump.org/) ```bash tcpdump -ne -i eth0 -Q in host 192.168.252.1 and port 443 ``` * `-n` - don't convert addresses * `-e` - print the link-level headers * `-i [iface]` - set interface * `-Q|-D [in|out|inout]` - choose send/receive direction (`-D` - for old tcpdump versions) * `host [ip|hostname]` - set host, also `[host not]` * `[and|or]` - set logic * `port [1-65535]` - set port number, also `[port not]` ```bash tcpdump -ne -i eth0 -Q in host 192.168.252.1 and port 443 -c 5 -w tcpdump.pcap ``` * `-c [num]` - capture only num number of packets * `-w [filename]` - write packets to file, `-r [filename]` - reading from file ___ ##### Tool: [ngrep](http://ngrep.sourceforge.net/usage.html) ```bash ngrep -d eth0 "www.google.com" port 443 ``` * `-d [iface|any]` - set interface * `[domain]` - set hostname * `port [1-65535]` - set port number ```bash ngrep -d eth0 "www.google.com" (host 10.240.20.2) and (port 443) ``` * `(host [ip|hostname])` - filter by ip or hostname * `(port [1-65535])` - filter by port number ```bash ngrep -d eth0 -qt -O ngrep.pcap "www.google.com" port 443 ``` * `-q` - quiet mode (only payloads) * `-t` - added timestamps * `-O [filename]` - save output to file, `-I [filename]` - reading from file ```bash ngrep -d eth0 -qt 'HTTP' 'tcp' ``` * `HTTP` - show http headers * `tcp|udp` - set protocol * `[src|dst] host [ip|hostname]` - set direction for specific node ```bash ngrep -l -q -d eth0 -i "User-Agent: curl*" ``` * `-l` - stdout line buffered * `-i` - case-insensitive search ___ ##### Tool: [hping3](http://www.hping.org/) ```bash hping3 -V -p 80 -s 5050 www.google.com ``` * `-V|--verbose` - verbose mode * `-p|--destport` - set destination port * `-s|--baseport` - set source port * `` - set scan type * `-F|--fin` - set FIN flag, port open if no reply * `-S|--syn` - set SYN flag * `-P|--push` - set PUSH flag * `-A|--ack` - set ACK flag (use when ping is blocked, RST response back if the port is open) * `-U|--urg` - set URG flag * `-Y|--ymas` - set Y unused flag (0x80 - nullscan), port open if no reply * `-M 0 -UPF` - set TCP sequence number and scan type (URG+PUSH+FIN), port open if no reply ```bash hping3 -V -c 1 -1 -C 8 www.google.com ``` * `-c [num]` - packet count * `-1` - set ICMP mode * `-C|--icmptype [icmp-num]` - set icmp type (default icmp-echo = 8) ```bash hping3 -V -c 1000000 -d 120 -S -w 64 -p 80 --flood --rand-source ``` * `--flood` - sent packets as fast as possible (don't show replies) * `--rand-source` - random source address mode * `-d --data` - data size * `-w|--win` - winsize (default 64) ___ ##### Tool: [netcat](http://netcat.sourceforge.net/) ```bash nc -kl 5000 ``` * `-l` - listen for an incoming connection * `-k` - listening after client has disconnected * `>filename.out` - save receive data to file (optional) ```bash nc 192.168.0.1 5051 < filename.in ``` * `< filename.in` - send data to remote host ```bash nc -vz 10.240.30.3 5000 ``` * `-v` - verbose output * `-z` - scan for listening daemons ```bash nc -vzu 10.240.30.3 1-65535 ``` * `-u` - scan only udp ports ###### Transfer data file (archive) ```bash server> nc -l 5000 | tar xzvfp - client> tar czvfp - /path/to/dir | nc 10.240.30.3 5000 ``` ###### Launch remote shell ```bash server> nc -l 5000 -e /bin/bash client> nc 10.240.30.3 5000 ``` ###### Simple file server ```bash while true ; do nc -l 5000 | tar -xvf - ; done ``` ###### Simple HTTP Server > Restarts web server after each request - remove `while` condition for only single connection. ```bash cat > index.html << __EOF__

Hello! It's a site.

__EOF__ ``` ```bash server> while : ; do \ (echo -ne "HTTP/1.1 200 OK\r\nContent-Length: $(wc -c /" <"$_sent" & sed "s/^/<= /" <"$_recv" & nc -l -p "$_listen_port" <"$_back" \ | tee "$_sent" \ | nc "$_bk_host" "$_bk_port" \ | tee "$_recv" >"$_back" ``` ```bash server> chmod +x nc-proxy && ./nc-proxy 8080 192.168.252.10:8000 lport: 8080 bk_host: 192.168.252.10 bk_port: 8000 client> http -p h 10.240.30.3:8080 HTTP/1.1 200 OK Accept-Ranges: bytes Cache-Control: max-age=31536000 Content-Length: 2748 Content-Type: text/html; charset=utf-8 Date: Sun, 01 Jul 2018 20:12:08 GMT Last-Modified: Sun, 01 Apr 2018 21:53:37 GMT ``` ###### Create a single-use TCP or UDP proxy ```bash ### TCP -> TCP nc -l -p 2000 -c "nc [ip|hostname] 3000" ### TCP -> UDP nc -l -p 2000 -c "nc -u [ip|hostname] 3000" ### UDP -> UDP nc -l -u -p 2000 -c "nc -u [ip|hostname] 3000" ### UDP -> TCP nc -l -u -p 2000 -c "nc [ip|hostname] 3000" ``` ___ ##### Tool: [socat](http://www.dest-unreach.org/socat/doc/socat.html/) ###### Testing remote connection to port ```bash socat - TCP4:10.240.30.3:22 ``` * `-` - standard input (STDIO) * `TCP4:` - set tcp4 connection with specific params * `[hostname|ip]` - set hostname/ip * `[1-65535]` - set port number ###### Redirecting TCP-traffic to a UNIX domain socket under Linux ```bash socat TCP-LISTEN:1234,bind=127.0.0.1,reuseaddr,fork,su=nobody,range=127.0.0.0/8 UNIX-CLIENT:/tmp/foo ``` * `TCP-LISTEN:` - set tcp listen with specific params * `[1-65535]` - set port number * `bind=[hostname|ip]` - set bind hostname/ip * `reuseaddr` - allows other sockets to bind to an address * `fork` - keeps the parent process attempting to produce more connections * `su=nobody` - set user * `range=[ip-range]` - ip range * `UNIX-CLIENT:` - communicates with the specified peer socket * `filename` - define socket ___ ##### Tool: [lsof](https://en.wikipedia.org/wiki/Lsof) ###### Show process that use internet connection at the moment ```bash lsof -P -i -n ``` ###### Show process that use specific port number ```bash lsof -i tcp:443 ``` ###### Lists all listening ports together with the PID of the associated process ```bash lsof -Pan -i tcp -i udp ``` ###### List all open ports and their owning executables ```bash lsof -i -P | grep -i "listen" ``` ###### Show open ports ```bash lsof -Pni4 | grep LISTEN | column -t ``` ###### List all files opened by a particular command ```bash lsof -c "process" ``` ###### View user activity per directory ```bash lsof -u username -a +D /etc ``` ___ ##### Tool: [netstat](https://en.wikipedia.org/wiki/Netstat) ###### Graph # of connections for each hosts ```bash netstat -an | grep ESTABLISHED | awk '{print $5}' | awk -F: '{print $1}' | grep -v -e '^[[:space:]]*$' | sort | uniq -c | awk '{ printf("%s\t%s\t",$2,$1) ; for (i = 0; i < $1; i++) {printf("*")}; print "" }' ``` ###### Monitor open connections for specific port including listen, count and sort it per IP ```bash watch "netstat -plan | grep :443 | awk {'print \$5'} | cut -d: -f 1 | sort | uniq -c | sort -nk 1" ``` ___ ##### Tool: [rsync](https://en.wikipedia.org/wiki/Rsync) ###### Rsync remote data as root using sudo ```bash rsync --rsync-path 'sudo rsync' username@hostname:/path/to/dir/ /local/ ``` Programming ##### Tool: [awk](http://www.grymoire.com/Unix/Awk.html) ###### Remove duplicate entries in a file without sorting ```bash awk '!x[$0]++' filename ``` ###### Exclude multiple columns using AWK ```bash awk '{$1=$3=""}1' filename ``` ___ ##### Tool: [sed](http://www.grymoire.com/Unix/Sed.html) ###### To print a specific line from a file ```bash sed -n 10p /path/to/file ``` ###### Remove a specific line from a file ```bash sed -i 10d /path/to/file ``` ###### Remove a range of lines from a file ```bash sed -i -re ',d' ``` ___ ##### Tool: [grep](http://www.grymoire.com/Unix/Grep.html) ###### Search for a "pattern" inside all files in the current directory ```bash grep -RnisI "pattern" * fgrep "pattern" * -R ``` ###### Remove blank lines from a file and save output to new file ```bash grep . filename > newfilename ``` ###### Except multiple patterns ```bash grep -vE '(error|critical|warning)' filename ``` ###### Show data from file without comments ```bash grep -v ^[[:space:]]*# filename ``` ###### Show data from file without comments and new lines ```bash egrep -v '#|^$' filename ```

A collection of awesome lists, manuals, blogs, hacks, one-liners and tools for Awesome Ninja Admins.