`gcc-14` added a new warning around dangerous use of `strncpy()` withi
known overflow:
../sway/config.c: In function 'do_var_replacement':
../sway/config.c:983:33: error: '__builtin___strncpy_chk' specified bound depends on the length of the source argument [-Werror=stringop-truncation]
983 | strncpy(newptr, var->value, vvlen);
| ^
../sway/config.c:971:45: note: length computed here
971 | int vvlen = strlen(var->value);
| ^~~~~~~~~~~~~~~~~~
It's a bit fishy to rely on truncating behaviour of `strncpy()`. The
change uses `memcpy()` as more explicit way to express copy of `vvlen`
bytes.
See: https://github.com/swaywm/sway/issues/4511
Adds a bool config option `primary_selection`, which explicitly
enables/disables the primary selection clipboard. Defaults to enabled.
This is implemented as a launch-only option which enables or disables the creation of the
`zwp_primary_selection_device_manager_v1` global.
Co-authored-by: Tilde Rose <t1lde@protonmail.com>
Use pango to parse font configuration early, and reject the command as
invalid if the value is invalid for pango. Since we're already parsing
the font into a `PangoFontDescription`, keep that instance around and
avoid re-parsing the font each time we render text.
Fixes: https://github.com/swaywm/sway/issues/6805
Add a subcommand for `smart_gaps` that enables outer gaps only
on workspaces with exactly one visible child.
Also add documentation for `smart_gaps toggle`.
Prior to 62d90a8e, titlebar's font height (and other related values)
would change any time any titlebar's content changed, so these values
were recalculated each time any titlebar's content changed (or a new
titlebar was created).
However, since the above was merge, these values no longer change so
often and we only need to recalculate them when the configured font
changes (and stop calling `config_update_font_height` each time
titlebars are rendered).
This commit removes all the unecessary calls to this function and avoids
all those unecessary calculations. Whenever the font strays from the
default value, the `font` command is called, and it calls
`config_update_font_height`, which is enough to keep the value always up
to date.
I've also added a default value to the `font_baseline` config, since
otherwise that's zero for setups that don't explicitly specify a font.
Use fixed titlebar heights. The default height is calculated based on
font metrics for the configured font and current locale.
Some testing with titles with emoji and CJK characters (which are
substantially higher in my setup) shows that the titlebars retain their
initial value, text does shift up or down, and all titlebars always
remain aligned.
Also drop some also now-unecessary title_height calculations.
Makes also needed to be updated, since they should be positioned with
the same rules.
If HOME environment variable is not set, sway fails startup with a
segmentation fault due to null pointer dereference.
Also check calloc return value and only perform the fallback code when
really needed.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
This color, both in i3 and as described in sway(5), defaults to #888888.
However, the actual default also has an alpha of 88 instead of FF,
meaning it ends up significantly darker than intended.
Before the default was "smart". This means a visible app could steal focus
whenever it wanted to. This can be an issue since having focus allows for
e.g. clipboard access.
This commit changes the default to "urgent" instead.
Closes: https://github.com/swaywm/sway/issues/5139
This makes it so invalid configs will return the exit code 1 when the
validation flag is given. This also reduces the log level to SWAY_ERROR,
which makes it so only the errors are shown. If someone wants more
verbose output, the can use the -V/--verbose or -d/--debug flags.
Additionally, this also makes it so swaybg will not be spawned when
validating the config.
This is the second in a series of commits to refactor the color handling
in sway. This removes the duplicated color parsing code in
sway/commands/client.c. Additionally, this combines the parsing of
colors to float arrays with that in sway/config.c and introduces a
color_to_rgba function in commom/util.c.
As an added bonus, this also makes it so non of the colors in a border
color class will be changed unless all of the colors specified are
valid. This ensures that an invalid command does not get partially
applied.
When making the reload validation improvements, I forgot that input type
configs are stored in a separate list. This makes it so input type
configs are correctly applied on reload.
For the validation pass of reloading, there is no need to touch swaybg,
swaynag, inputs, outputs, or seats. This drastically improves the speed
of a reload by skipping over the expensive I/O configuration and
handling of wayland clients. As long as the syntax is valid, the
CMD_FAILURE's can be relayed during the actual reload.
Currently commented lines ending in the backslash character will be
concatenated with the following line.
```
# with this comment \
exec swaynag -m 'will not run'
```
This change modifies `getline_with_cont` to stop reading when the
initial character is a '#'.
This just adds a force option to cmd_xwayland that allows for xwayland
to be immediately launched instead of lazily launched. This is useful
for slower machines so it can be part of the startup time instead of
when the user is actively trying to use it
This adds a --reload flag to cmd_bindswitch that allows for the binding
to be executed on reload. One possible use case for this is to allow
users to disable outputs when the lid closes and enable them when the
lid opens without having to open and re-close the lid after a reload.
Since xwayland can only be enabled/disabled at launch, the xwayland
status should be retained on reload. Having `xwayland enabled|disabled`
in the config, should not cause `config->xwayland` to be invalid on
reload. This also returns `CMD_FAILURE` with a message that xwayland
can only be enabled/disabled on launch when trying to set the invalid
status on reload. This allows swaynag to notify the user that the
change will not take effect until sway is restarted.
This adds the logic to defer binding execution while sway is still
initializing. Without this, the binding command would be executed, but
the command handler would return CMD_DEFER, which was being treated as
a failure to run. To avoid partial executions, this will defer all
bindings while config->active is false.
When reloading, this destroys the old config's swaybg client before
spawning the new config's swaybg. This fixes a race condition where the
old config's swaybg client's destroy was being called after the new
config's swaybg client was being spawned. This was causing the
reference to the new swaybg client to be removed and never destroyed.
This also modifies handle_swaybg_client_destroy to grab the config
reference using wl_container_of on the listener since the swaybg client
may be the old config swaybg client and should be used instead of the
global config instance
* `bindsym --to-code` enables keysym to keycode translation.
* If there are no `xkb_layout` commands in the config file, the translation
uses the XKB_DEFAULT_LAYOUT value.
* It there is one or more `xkb_layout` command, the translation uses
the first one.
* If the translation is unsuccessful, a message is logged and the binding
is stored as BINDING_KEYSYM.
* The binding keysyms are stored and re-translated when a change in the input
configuration may affect the translated bindings.
Add support for configurations that apply to a type of inputs
(i.e. natural scrolling on all touchpads). A type config is
differentiated by a `type:` prefix followed by the type it
corresponds to.
When new devices appear, the device config is merged on top of its
type config (if it exists). New type configs are applied on top of
existing configs.
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.
Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>
Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID
<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE
(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
Enables i3-compatible behavior regarding hiding the title bar on tabbed and
stacked containers with one child.
Related issues and merge requests: #3031, #3002, #2912, #2987.
This fixes the issue of the display freezing on reload with
wlroots#1545.
On master, all output configs are applied on reload. This may cause an
output to have its config applied up to three times, instead of just
once. The three cases are: output name, output identifier, and wildcard.
Not only is this inefficient, but it can cause swaybg to be spawned and
immediately killed.
However, swaybg requires two roundtrips of wl_display (to obtain needed
globals) before it enters its normal event loop. Modesetting will
roundtrip the wl_display. Without modesetting, waitpid for killing
swaybg could block infinitely due to swaybg being blocked by
wl_display_roundtrip.
This only configured an output once. It either uses the wildcard config
or creates an empty wildcard config and applies that. This also fixes a
bug where an output would not be reset when there is no output config to
apply to it.
This fixes a few misc memory leaks reported by asan:
- Items of `config->config_chain` are now freed instead of just the list
itself
- `bar->swaybar_command` is now freed
- The result returned by a seat subcommand is now returned instead of
leaked
Since `load_include_config` compares against the realpath of a config
file when checking if a config has already been added, the main config's
realpath has to be added to the config_chain.
However, includes from the main config should be processed relative to
the path given to allow for symbolic links. This stores the realpath in
`config->config_chain`, but uses the given path for all other
operations.
