If the focused container is floating by itself, create a new container
in tiling mode as a sibling of the inactive focused container instead of
creating it as a sibling of everything that is in tiling mode in that
workspace. This is the i3 behavior.
Prior to 62d90a8e, titlebar's font height (and other related values)
would change any time any titlebar's content changed, so these values
were recalculated each time any titlebar's content changed (or a new
titlebar was created).
However, since the above was merge, these values no longer change so
often and we only need to recalculate them when the configured font
changes (and stop calling `config_update_font_height` each time
titlebars are rendered).
This commit removes all the unecessary calls to this function and avoids
all those unecessary calculations. Whenever the font strays from the
default value, the `font` command is called, and it calls
`config_update_font_height`, which is enough to keep the value always up
to date.
I've also added a default value to the `font_baseline` config, since
otherwise that's zero for setups that don't explicitly specify a font.
Use fixed titlebar heights. The default height is calculated based on
font metrics for the configured font and current locale.
Some testing with titles with emoji and CJK characters (which are
substantially higher in my setup) shows that the titlebars retain their
initial value, text does shift up or down, and all titlebars always
remain aligned.
Also drop some also now-unecessary title_height calculations.
Makes also needed to be updated, since they should be positioned with
the same rules.
This fixes the following scenario:
- Place a floating window so its border is right at the edge of the
screen
- Create a new split
- The border disappears
- Moving the window does not restore the border
remove view from its own unmap event listener so when subsurfaces
link try to remove themselves they won't run into it.
This fixes the following ASAN use-after-free error on a build slightly
modified to instrument wl_list operations:
==71705==ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000829a0 at pc 0x000000508eb7 bp 0x7ffec8fd8030 sp 0x7ffec8fd8028
WRITE of size 8 at 0x6160000829a0 thread T0
#0 0x508eb6 in wl_list_remove ../common/list.c:181
#1 0x4f4998 in view_child_destroy ../sway/tree/view.c:1131
#2 0x4f38fa in subsurface_handle_destroy ../sway/tree/view.c:946
#3 0x7fda50744892 in wlr_signal_emit_safe ../util/signal.c:29
#4 0x7fda5072f0dd in subsurface_destroy ../types/wlr_surface.c:649
#5 0x7fda507312c4 in subsurface_handle_surface_destroy ../types/wlr_surface.c:1094
#6 0x7fda50744892 in wlr_signal_emit_safe ../util/signal.c:29
#7 0x7fda5072f305 in surface_handle_resource_destroy ../types/wlr_surface.c:677
#8 0x7fda508180ce in destroy_resource (/lib64/libwayland-server.so.0+0xc0ce)
#9 0x7fda508187f2 in wl_client_destroy (/lib64/libwayland-server.so.0+0xc7f2)
#10 0x7fda50818e5f in wl_client_connection_data (/lib64/libwayland-server.so.0+0xce5f)
#11 0x7fda50818219 in wl_event_loop_dispatch (/lib64/libwayland-server.so.0+0xc219)
#12 0x7fda50818984 in wl_display_run (/lib64/libwayland-server.so.0+0xc984)
#13 0x43122c in server_run ../sway/server.c:254
#14 0x42f47c in main ../sway/main.c:433
#15 0x7fda503cab74 in __libc_start_main (/lib64/libc.so.6+0x27b74)
#16 0x40f6fd in _start (/opt/wayland/bin/sway+0x40f6fd)
0x6160000829a0 is located 288 bytes inside of 592-byte region [0x616000082880,0x616000082ad0)
freed by thread T0 here:
#0 0x7fda50f01a27 in free (/lib64/libasan.so.6+0xaea27)
#1 0x4532d8 in destroy ../sway/desktop/xdg_shell.c:262
#2 0x4ed17b in view_destroy ../sway/tree/view.c:67
#3 0x4ed300 in view_begin_destroy ../sway/tree/view.c:83
#4 0x454a3f in handle_destroy ../sway/desktop/xdg_shell.c:507
#5 0x7fda50744892 in wlr_signal_emit_safe ../util/signal.c:29
#6 0x7fda506e2c87 in reset_xdg_surface ../types/xdg_shell/wlr_xdg_surface.c:481
#7 0x7fda506e3018 in destroy_xdg_surface ../types/xdg_shell/wlr_xdg_surface.c:516
#8 0x7fda506dfbe5 in xdg_client_handle_resource_destroy ../types/xdg_shell/wlr_xdg_shell.c:71
#9 0x7fda508180ce in destroy_resource (/lib64/libwayland-server.so.0+0xc0ce)
previously allocated by thread T0 here:
#0 0x7fda50f01ed7 in calloc (/lib64/libasan.so.6+0xaeed7)
#1 0x454bc8 in handle_xdg_shell_surface ../sway/desktop/xdg_shell.c:528
#2 0x7fda50744892 in wlr_signal_emit_safe ../util/signal.c:29
#3 0x7fda506e2363 in handle_xdg_surface_commit ../types/xdg_shell/wlr_xdg_surface.c:378
#4 0x7fda5072e368 in surface_commit_state ../types/wlr_surface.c:455
#5 0x7fda5072e51d in surface_commit_pending ../types/wlr_surface.c:474
#6 0x7fda5072ea58 in surface_commit ../types/wlr_surface.c:542
#7 0x7fda4fb3ac03 in ffi_call_unix64 (/lib64/libffi.so.6+0x6c03)
Fixes#5168
view_child_init was calling view_init_subsurfaces, which did not set the
parent attribute for the subchildren. This lead to the subchildren
acting as standalone children. If the parent was an xdg_popup, this
would make the subchild unaware of the popup position.
Introduce view_child_init_subsurfaces for view_child_init to use
instead.
Closes: https://github.com/swaywm/sway/issues/6038
The subchildren lose their parent association at this point, so they
will not be able to see that the parent is unmapped.
Instead, just set the subchildren to be unmapped directly.
Pending state is currently inlined directly in the container struct,
while the current state is in a state struct. A side-effect of this is
that it is not immediately obvious that pending double-buffered state is
accessed, nor is it obvious what state is double-buffered.
Instead, use the state struct for both current and pending.
The size of a tiled container cannot change in response to new buffer
sizes, so there is no need to commit a new transaction. Instead, simply
recenter the view with the new geometry, leaving the full transaction
flow for floating containers.
We need to use surface_x and surface_y when rendering and damaging saved
buffers as these compensate for views that have been centered due to
being smaller than their container.
Add them to the surface positions on the saved buffer so we have the
values from the time the buffer was saved.
For certain applications (e.g. JetBrains) the parent window controls
input. We need to adhere to the ICCCM input focus specification to
properly handle these cases.
Relates to swaywm/wlroots#2604
Instead of calling wlr_xdg_surface_for_each_popup and then
wlr_surface_for_each_surface, use the new for_each_popup_surface helper
introduced in [1] that does it in one go.
[1]: https://github.com/swaywm/wlroots/pull/2609
In i3, the workspace_layout command does not affect the
workspace layout. Instead, new workspace level containers
are wrapped in the desired layout and the workspace layout
always defaults to the output orientation.
To query whether a container is sticky, checking `con->is_sticky` is
insufficient. `container_is_floating_or_child` must also return true;
this led to a lot of repetition.
This commit introduces `container_is_sticky[_or_child]` functions, and
switches all stickiness checks to use them. (Including ones where the
container is already known to be floating, for consistency.)
Currently, in view_autoconfigure, the only condition for show_border
is !view_is_only_visible. view_is_only_visible does not cross the
boundary between the workspace's tiling and floating lists and does not
differentiate between them.
The result is, that in a workspace with zero or more tiling containers
and a single floating container, the floating container will lose its
borders as soon as it is split, provided that a only one view is visible
within the floating container.
Fixed by adjusting the condition for show_borders.
xdg-shell doesn't allow clients to set the title to NULL, so we
shouldn't need to call wlr_foreign_toplevel_handle_v1_set_title with an
empty string to reset the old one.
Closes: https://github.com/swaywm/sway/issues/5488
It is not a part of the foreign-toplevel-management protocol to get the
class of a toplevel, only for getting the app_id.
For xwayland clients this is an issue because that means that you cannot
identify what application the toplevel refers to which is the point of
the app_id property.
By falling back to class when an app_id does not exist solves this problem.
Phoc also uses app_id and class interchangeably in their implementation
of foreign-toplevel-management, in fact they always do that and not only
for just this protocol.
c8d8a4c544/src/xwayland.c (L236)
During the execution of a resize transaction, the buffer associated
with a view's surface is saved and reused until the client acknowledges
the resulting configure event.
However, only one the main buffer of the main surface was stored and
rendered, meaning that subsurfaces disappear during resize.
Iterate over all, store and render buffers from all surfaces in the view
to ensure that correct rendering is preserved.
Add a separate per-view shortcuts_inhibitor command that can be used
with criteria to override the per-seat defaults. This allows to e.g.
disable shortcuts inhibiting globally but enable it for specific,
known-good virtualization and remote desktop software or, alternatively,
to blacklist that one slightly broken piece of software that just
doesn't seem to get it right but insists on trying.
Add a flag to sway_view and handling logic in the input manager that
respects that flag if configured but falls back to per-seat config
otherwise. Add the actual command but with just enable and disable
subcommands since there's no value in duplicating the per-seat
activate/deactivate/toggle logic here. Split the inhibitor retrieval
helper in two so we can use the backend half in the command to retrieve
inhibitors for a specific surface and not just the currently focused
one. Extend the manual page with documentation of the command and
references to its per-seat sibling and usefulness with criteria.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
If a subsurface is created for a surface that is associated with a
scratchpad hidden view, do not attempt to send an enter to it. The
subsurface is not on any output and since there is no workspace
associated with the view, attempting to get the output for the NULL
workspace will result in a SIGSEGV.
