input and seat command docs

sway/sway-input.5.txt

@@ -1,5 +1,5 @@
 /////
-vim:set ts=4 sw=4 tw=82 noet:
+vim:set ft=asciidoc ts=4 sw=4 tw=82 noet:
 /////
 sway-input (5)
 ==============
@@ -11,12 +11,37 @@ sway-input - input configuration file and commands
 Description
 -----------
 
-Sway allows for configuration of libinput devices within the sway configuration file.
+Sway allows for configuration of devices within the sway configuration file.
 sway-input commands must be used inside an _input { }_ block in the config.
 To obtain a list of available device identifiers, run **swaymsg -t get_inputs**.
 
-Commands
---------
+Input Commands
+--------------
+
+Keyboard Configuration
+~~~~~~~~~~~~~~~~~~~~~~
+
+For more information on these xkb configuration options, see
+**xkeyboard-config**(7).
+
+**input** <identifier> xkb_layout <layout_name>::
+	Sets the layout of the keyboard like _us_ or _de_.
+
+**input** <identifier> xkb_model <model_name>::
+	Sets the model of the keyboard. This has an influence for some extra keys your
+	keyboard might have.
+
+**input** <identifier> xkb_options <options>::
+	Sets extra xkb configuration options for the keyboard.
+
+**input** <identifier> xkb_rules <rules>::
+	Sets files of rules to be used for keyboard mapping composition.
+
+**input** <identifier> xkb_variant <variant>::
+	Sets the variant of the keyboard like _dvorak_ or _colemak_.
+
+Libinput Configuration
+~~~~~~~~~~~~~~~~~~~~~~
 
 **input** <identifier> accel_profile <adaptive|flat>::
 	Sets the pointer acceleration profile for the specified input device.
@@ -53,6 +78,23 @@ Commands
 **input** <identifier> tap <enabled|disabled>::
 	Enables or disables tap for specified input device.
 
+Seat Configuration
+------------------
+
+Configure options for multiseat mode. sway-seat commands must be used inside a
+_seat { }_ block in the config.
+
+A _seat_ is a collection of input devices that act independently of each other.
+Seats are identified by name and the default seat is _seat0_ if no seats are
+configured. Each seat has an independent keyboard focus and a separate cursor that
+is controlled by the pointer devices of the seat. This is useful for multiple
+people using the desktop at the same time with their own devices (each sitting in
+their own "seat").
+
+**seat** <name> attach <input_identifier>::
+	Attach an input device to this seat by its input identifier. A special value
+	of _*_ will attach all devices to the seat.
+
 See Also
 --------
 

sway/sway.1.txt

@@ -1,5 +1,5 @@
 /////
-vim:set ts=4 sw=4 tw=82 noet:
+vim:set ft=asciidoc ts=4 sw=4 tw=82 noet:
 /////
 :quotes.~:
 
@@ -93,27 +93,6 @@ The following environment variables have an effect on sway:
 *SWAYSOCK*::
 	Specifies the path to the sway IPC socket.
 
-*WLC_DRM_DEVICE*::
-	Specifies the device to use in DRM mode.
-
-*WLC_SHM*::
-	Set 1 to force EGL clients to use shared memory.
-
-*WLC_OUTPUTS*::
-	Number of fake outputs to use when running in X11 mode.
-
-*WLC_XWAYLAND*::
-	Set to 0 to disable Xwayland support.
-
-*WLC_LIBINPUT*::
-	Set to 1 to force libinput (even in X11 mode).
-
-*WLC_REPEAT_DELAY*::
-	Configures the keyboard repeat delay.
-
-*WLC_REPEAT_RATE*::
-	Configures the keyboard repeat rate.
-
 *XKB_DEFAULT_RULES*, *XKB_DEFAULT_MODEL*, *XKB_DEFAULT_LAYOUT*, *XKB_DEFAULT_VARIANT*, *XKB_DEFAULT_OPTIONS*::
 	Configures the xkb keyboard settings. See xkeyboard-config(7).
 

sway/sway.5.txt

@@ -312,7 +312,7 @@ The default colors are:
 **hide_edge_borders** <none|vertical|horizontal|both|smart>::
 	Hide window borders adjacent to the screen edges. Default is _none_.
 
-**input** <input device> <block of commands>::
+**input** <input_device> <block of commands>::
 	Append _{_ to this command, the following lines will be commands to configure
 	the named input device, and _}_ on its own line will close the block.
 	+
@@ -320,6 +320,11 @@ The default colors are:
 	+
 	See **sway-input**(5) for details.
 
+**seat** <seat_name> <block of commands>::
+	Append _{_ to this command, the following lines will be commands to configure
+	the named seat, and _}_ on its own line will close the block.
+	See **sway-input**(5) for details.
+
 **kill**::
 	Kills (force-closes) the currently-focused container and all of its children.