mirror of
git://slackware.nl/current.git
synced 2024-12-26 09:58:59 +01:00
4967f0e2be
a/elilo-3.16-x86_64-18.txz: Rebuilt.
eliloconfig: if we don't find initrd-generic.img, try to fall back on
/boot/initrd.gz. Thanks to rworkman.
a/kernel-firmware-20241022_e1d9577-noarch-1.txz: Upgraded.
a/kernel-generic-6.11.5-x86_64-1.txz: Upgraded.
a/less-668-x86_64-1.txz: Upgraded.
a/openssl11-solibs-1.1.1zb-x86_64-1.txz: Upgraded.
a/sysvinit-3.11-x86_64-1.txz: Upgraded.
a/usbutils-018-x86_64-1.txz: Upgraded.
d/kernel-headers-6.11.5-x86-1.txz: Upgraded.
d/parallel-20241022-noarch-1.txz: Upgraded.
d/swig-4.3.0-x86_64-1.txz: Upgraded.
k/kernel-source-6.11.5-noarch-1.txz: Upgraded.
l/libvisio-0.1.8-x86_64-1.txz: Upgraded.
l/python-trove-classifiers-2024.10.21.16-x86_64-1.txz: Upgraded.
n/openssl11-1.1.1zb-x86_64-1.txz: Upgraded.
Apply patch to fix a security issue:
Harden BN_GF2m_poly2arr against misuse.
This CVE was fixed by the 1.1.1zb release that is only available to
subscribers to OpenSSL's premium extended support. The patch was prepared
by backporting from the OpenSSL-3.0 repo. The reported version number has
been updated so that vulnerability scanners calm down.
Thanks to Ken Zalewski for the patch!
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2024-9143
(* Security fix *)
xap/gucharmap-16.0.2-x86_64-1.txz: Upgraded.
xap/mozilla-thunderbird-128.3.3esr-x86_64-1.txz: Upgraded.
This is a bugfix release.
For more information, see:
https://www.mozilla.org/en-US/thunderbird/128.3.3esr/releasenotes/
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
98 lines
3.5 KiB
Text
98 lines
3.5 KiB
Text
|
|
Slackware initrd mini HOWTO
|
|
by Patrick Volkerding, volkerdi@slackware.com
|
|
Tue Oct 22 23:43:39 UTC 2024
|
|
|
|
This document describes how to create and install an initrd, which may be
|
|
required to use the 4.x kernel. Also see "man mkinitrd".
|
|
|
|
1. What is an initrd?
|
|
2. Why to I need an initrd?
|
|
3. How do I build the initrd?
|
|
4. Now that I've built an initrd, how do I use it?
|
|
|
|
|
|
1. What is an initrd?
|
|
|
|
Initrd stands for "initial ramdisk". An initial ramdisk is a very small
|
|
Linux filesystem that is loaded into RAM and mounted as the kernel boots,
|
|
and before the main root filesystem is mounted.
|
|
|
|
2. Why do I need an initrd?
|
|
|
|
The usual reason to use an initrd is because you need to load kernel
|
|
modules before mounting the root partition. Usually these modules are
|
|
required to support the filesystem used by the root partition (ext3, ext4,
|
|
btrfs, xfs), or perhaps the controller that the hard drive is attached
|
|
to (SCSI, RAID, etc). Essentially, there are so many different options
|
|
available in modern Linux kernels that it isn't practical to try to ship
|
|
many different kernels to try to cover everyone's needs. It's a lot more
|
|
flexible to ship a generic kernel and a set of kernel modules for it.
|
|
|
|
3. How do I build the initrd?
|
|
|
|
The easiest way to make the initrd is to use the mkinitrd script included
|
|
in Slackware's mkinitrd package. We'll walk through the process of
|
|
upgrading to the generic 6.11.5 Linux kernel using the packages
|
|
found in Slackware's slackware/a/ directory.
|
|
|
|
First, make sure the kernel/modules, and mkinitrd package are installed
|
|
(the current version numbers might be a little different, so this is just
|
|
an example):
|
|
|
|
installpkg kernel-generic-6.11.5-x86_64-1.txz
|
|
installpkg mkinitrd-1.4.11-x86_64-39.txz
|
|
|
|
Change into the /boot directory:
|
|
|
|
cd /boot
|
|
|
|
Now you'll want to run "mkinitrd". I'm using ext4 for my root filesystem,
|
|
and since the disk controller requires no special support the ext4 module
|
|
will be the only one I need to load:
|
|
|
|
mkinitrd -c -k 6.11.5 -m ext4
|
|
|
|
This should do two things. First, it will create a directory
|
|
/boot/initrd-tree containing the initrd's filesystem. Then it will
|
|
create an initrd (/boot/initrd.gz) from this tree. If you wanted to,
|
|
you could make some additional changes in /boot/initrd-tree/ and
|
|
then run mkinitrd again without options to rebuild the image. That's
|
|
optional, though, and only advanced users will need to think about that.
|
|
|
|
Here's another example: Build an initrd image using Linux 6.11.5
|
|
kernel modules for a system with an ext4 root partition on /dev/sdb3:
|
|
|
|
mkinitrd -c -k 6.11.5 -m ext4 -f ext4 -r /dev/sdb3
|
|
|
|
|
|
4. Now that I've built an initrd, how do I use it?
|
|
|
|
Now that you've got an initrd (/boot/initrd.gz), you'll want to load
|
|
it along with the kernel at boot time. If you use LILO for your boot
|
|
loader you'll need to edit /etc/lilo.conf and add a line to load the
|
|
initrd. Here's an example section of lilo.conf showing how this is
|
|
done:
|
|
|
|
# Linux bootable partition config begins
|
|
image = /boot/vmlinuz-generic
|
|
initrd = /boot/initrd.gz
|
|
root = /dev/sda6
|
|
label = Slackware
|
|
read-only
|
|
# Linux bootable partition config ends
|
|
|
|
The initrd is loaded by the "initrd = /boot/initrd.gz" line.
|
|
Just add the line right below the line for the kernel image you use.
|
|
Save the file, and then run LILO again ('lilo' at the command line).
|
|
You'll need to run lilo every time you edit lilo.conf or rebuild the
|
|
initrd.
|
|
|
|
Other bootloaders such as syslinux also support the use of an initrd.
|
|
See the documentation for those programs for details on using an
|
|
initrd with them.
|
|
|
|
|
|
---------
|
|
|
|
Have fun!
|