mirror of
git://slackware.nl/current.git
synced 2024-12-27 09:59:16 +01:00
8c9271e25c
a/kernel-generic-4.14.47-x86_64-1.txz: Upgraded. a/kernel-huge-4.14.47-x86_64-1.txz: Upgraded. SCSI_DPT_I2O m -> y SCSI_ISCI m -> y (thanks to wael_h) a/kernel-modules-4.14.47-x86_64-1.txz: Upgraded. a/pkgtools-15.0-noarch-14.txz: Rebuilt. installpkg: rarely, an uncompressed size that's not quite to the next level (e.g., 1020K) will exceed the expected length and cause a --terse line to be one character longer than --terselength. Chop lines to --terselength before outputting them. The trailing ']' might be dropped, but no big deal. ap/slackpkg-2.83.0-noarch-1.txz: Upgraded. Release 2.83.0; thanks to orbea, Didier Spaier, burdi01, David Allen, Eduard Rozenberg, and Stuart Winter for various fixes and enhancements. Allow using vimdiff to compare .new and original files Numerous fixups for alternate $ROOT .new config files are sorted so that display order should be consistent among multiple machines Abort operation if system date is near epoch (mostly relevant for ARM machines and others with no RTC) Update Slackware ARM gpg key Update Slackware ARM mirror list No longer offer to run lilo - simply advise user that the kernel image has changed and give advice, but also require a keypress to (hopefully) confirm that the message was actually read mandoc lint fixes to slackpkg.8 Warn user if a -current mirror is selected (but only warn once) d/git-2.17.1-x86_64-1.txz: Upgraded. d/kernel-headers-4.14.47-x86-1.txz: Upgraded. d/rust-1.26.1-x86_64-1.txz: Upgraded. k/kernel-source-4.14.47-noarch-1.txz: Upgraded. l/fftw-3.3.8-x86_64-1.txz: Upgraded. l/imagemagick-6.9.9_48-x86_64-1.txz: Upgraded. n/network-scripts-15.0-noarch-8.txz: Rebuilt. Allow setting an interface in promiscuous mode; this is needed for networking to function properly in containers Fixup setting of IPALIASES (allow non /32 masks; not only is the /32 mask not required and even undesirable in some cases, this makes ipv6 support easier to integrate (and Darren is working on that as well) Thanks to Darren Austin. n/stunnel-5.46-x86_64-1.txz: Upgraded. n/ulogd-2.0.7-x86_64-2.txz: Rebuilt. Fixed empty logrotate file. x/xorg-server-1.20.0-x86_64-2.txz: Rebuilt. Patched to fix nouveau segfault. Thanks to Rod3775 for the patch. x/xorg-server-xephyr-1.20.0-x86_64-2.txz: Rebuilt. x/xorg-server-xnest-1.20.0-x86_64-2.txz: Rebuilt. x/xorg-server-xvfb-1.20.0-x86_64-2.txz: Rebuilt. xap/network-manager-applet-1.8.12-x86_64-2.txz: Rebuilt. Patched crash bug. Thanks to gmgf. isolinux/initrd.img: Rebuilt. kernels/*: Upgraded. usb-and-pxe-installers/usbboot.img: Rebuilt.
99 lines
3.5 KiB
Text
99 lines
3.5 KiB
Text
|
|
Slackware initrd mini HOWTO
|
|
by Patrick Volkerding, volkerdi@slackware.com
|
|
Thu May 31 03:30:41 UTC 2018
|
|
|
|
This document describes how to create and install an initrd, which may be
|
|
required to use the 4.x kernel. Also see "man mkinitrd".
|
|
|
|
1. What is an initrd?
|
|
2. Why to I need an initrd?
|
|
3. How do I build the initrd?
|
|
4. Now that I've built an initrd, how do I use it?
|
|
|
|
|
|
1. What is an initrd?
|
|
|
|
Initrd stands for "initial ramdisk". An initial ramdisk is a very small
|
|
Linux filesystem that is loaded into RAM and mounted as the kernel boots,
|
|
and before the main root filesystem is mounted.
|
|
|
|
2. Why do I need an initrd?
|
|
|
|
The usual reason to use an initrd is because you need to load kernel
|
|
modules before mounting the root partition. Usually these modules are
|
|
required to support the filesystem used by the root partition (ext3, ext4,
|
|
btrfs, xfs), or perhaps the controller that the hard drive is attached
|
|
to (SCSI, RAID, etc). Essentially, there are so many different options
|
|
available in modern Linux kernels that it isn't practical to try to ship
|
|
many different kernels to try to cover everyone's needs. It's a lot more
|
|
flexible to ship a generic kernel and a set of kernel modules for it.
|
|
|
|
3. How do I build the initrd?
|
|
|
|
The easiest way to make the initrd is to use the mkinitrd script included
|
|
in Slackware's mkinitrd package. We'll walk through the process of
|
|
upgrading to the generic 4.14.47 Linux kernel using the packages
|
|
found in Slackware's slackware/a/ directory.
|
|
|
|
First, make sure the kernel, kernel modules, and mkinitrd package are
|
|
installed (the current version numbers might be a little different, so
|
|
this is just an example):
|
|
|
|
installpkg kernel-generic-4.14.47-x86_64-1.txz
|
|
installpkg kernel-modules-4.14.47-x86_64-1.txz
|
|
installpkg mkinitrd-1.4.11-x86_64-6.txz
|
|
|
|
Change into the /boot directory:
|
|
|
|
cd /boot
|
|
|
|
Now you'll want to run "mkinitrd". I'm using ext4 for my root filesystem,
|
|
and since the disk controller requires no special support the ext4 module
|
|
will be the only one I need to load:
|
|
|
|
mkinitrd -c -k 4.14.47 -m ext4
|
|
|
|
This should do two things. First, it will create a directory
|
|
/boot/initrd-tree containing the initrd's filesystem. Then it will
|
|
create an initrd (/boot/initrd.gz) from this tree. If you wanted to,
|
|
you could make some additional changes in /boot/initrd-tree/ and
|
|
then run mkinitrd again without options to rebuild the image. That's
|
|
optional, though, and only advanced users will need to think about that.
|
|
|
|
Here's another example: Build an initrd image using Linux 4.14.47
|
|
kernel modules for a system with an ext4 root partition on /dev/sdb3:
|
|
|
|
mkinitrd -c -k 4.14.47 -m ext4 -f ext4 -r /dev/sdb3
|
|
|
|
|
|
4. Now that I've built an initrd, how do I use it?
|
|
|
|
Now that you've got an initrd (/boot/initrd.gz), you'll want to load
|
|
it along with the kernel at boot time. If you use LILO for your boot
|
|
loader you'll need to edit /etc/lilo.conf and add a line to load the
|
|
initrd. Here's an example section of lilo.conf showing how this is
|
|
done:
|
|
|
|
# Linux bootable partition config begins
|
|
image = /boot/vmlinuz-generic
|
|
initrd = /boot/initrd.gz
|
|
root = /dev/sda6
|
|
label = Slackware
|
|
read-only
|
|
# Linux bootable partition config ends
|
|
|
|
The initrd is loaded by the "initrd = /boot/initrd.gz" line.
|
|
Just add the line right below the line for the kernel image you use.
|
|
Save the file, and then run LILO again ('lilo' at the command line).
|
|
You'll need to run lilo every time you edit lilo.conf or rebuild the
|
|
initrd.
|
|
|
|
Other bootloaders such as syslinux also support the use of an initrd.
|
|
See the documentation for those programs for details on using an
|
|
initrd with them.
|
|
|
|
|
|
---------
|
|
|
|
Have fun!
|