slackware-current/source/ap/slackpkg/files/slackpkg.conf.5
Patrick J Volkerding da4119a5e0 Thu Mar 18 23:54:14 UTC 2021
ap/slackpkg-15.0.1-noarch-1.txz:  Upgraded.
  Tweak default blacklist file's help text (thanks, dive).
  Fix display of blacklisted packages.
  Tweaks to slack-desc.
  Note that kernel-headers should not be blacklisted.
  Added Lithuania mirrors (Totoro-kun on LQ).
  Fix exit code for pending updates (dive).
  Avoid matching txz/tgz etc extension when blacklisting (dive).
  Use https for all slackpkg homepage links.
  Update mirror files (14.2 -> 15.0).
  Add blacklist to search option.
  Move applyblacklist to end of makelist().
  Clarify how to blacklist duplicate packages.
  Fix new-config dialog.
  Reduce false positives in DOUBLEFILES detection.
  Remove spaces in awk..
  More blacklisting fixups (see full commit msg).
  Escape plus signs in blacklist regex.
  Convert ${ROOT}/${WORKDIR} > ${WORKDIR} (dive).
  Convert ${ROOT}/${CONF} -> ${CONF} and tweak blacklists (dive).
  Further fixup/enhancement to blacklisting issues.
  Fix "slackpkg blacklist" so that it shows blacklist again.
  Fixup internal blacklist handling.
  Use ERE for sanity_check() function (David Woodfall).
  Remove "slackpkg blacklist" from manual pages.
  Fix aaa_elflibs --> aaa_libraries in sample blacklist file (mozes).
  Split aarch64 and arm mirrors into separate files (mozes).
  Allow new-config after slackpkg upgrade itself (PiterPUNK).
  Modify blacklist regex line ending.
  Thanks to Robby Workman.
ap/sqlite-3.35.2-x86_64-1.txz:  Upgraded.
kde/kid3-3.8.6-x86_64-1.txz:  Upgraded.
l/glib2-2.66.8-x86_64-1.txz:  Upgraded.
l/pango-1.48.3-x86_64-2.txz:  Rebuilt.
  Eliminate dangling symlink. Thanks to upnort.
n/bind-9.16.13-x86_64-1.txz:  Upgraded.
n/links-2.22-x86_64-1.txz:  Upgraded.
n/network-scripts-15.0-noarch-14.txz:  Rebuilt.
  Fix discrepancies between rc.inet1.conf versions.
  Move configuration of SLACC before DHCP.
  Don't bring up a bridge interface if it will be brought up later by IP config.
  Fix a typo in br_open when configuring IFOPTS: i->1.
  Add SLAAC security and privacy options.
  Fix typo of 'default'.
  Added debugging output around new SLAAC enhancements.
  Move enabling RA before SLAAC security section.  Thanks to davjohn on LQ.
  Fix domain name validation checks.  Thanks to xbeastx74 on LQ for the report.
  Thanks to Darren "Tadgy" Austin and Robby Workman.
n/wireless_tools-30.pre9-x86_64-5.txz:  Rebuilt.
  rc.wireless: don't leave interfaces in up state as it prevents SLAAC.
  Take interface down at exit from rc.wireless.  Thanks to davjohn.
x/libgee-0.20.4-x86_64-1.txz:  Upgraded.
2021-03-19 08:59:51 +01:00

356 lines
8.7 KiB
Groff

.TH SLACKPKG.CONF 5 "March 2021" slackpkg-15.0.1 ""
.SH NAME
.B slackpkg.conf
\- Configuration data for slackpkg
.SH DESCRIPTION
The slackpkg.conf file contains information for
.B slackpkg
(8), an automated tool for managing Slackware Linux packages.
The slackpkg.conf file is a sequence of shell script variables, and each
variable controls one aspect of slackpkg. Comments begin with the #
character and end at end of the line, and comments may appear anywhere
inside the slackpkg.conf file. If some variable appears more than once
in the file, slackpkg will use the value that was defined last.
Many variables can be overridden by options passed to slackpkg on the command
line. If you need to override the value of
.B VARIABLE
, pass
.B -variable=value
on the command line just before the slackpkg action. Multiple variables may
be overridden.
EXAMPLE: slackpkg -batch=on -default_answer=y upgrade-all
For configuration options that have only two states, possible values are
either "on" or "off" unless otherwise indicated.
The different configuration options are:
.TP 5
.B ARCH
.br
Chooses the system architecture. Usually Slackpkg can find the correct
value using "uname -m". The valid values are:
.ds title MACHINE\t\tVALID ARCH VALUES
.ds arm ARM\t\t\tarm
.ds aarch64 AArch64\t\taarch64
.ds x86 x86 (32bits)\ti386, i486, i586 and i686
.ds x86_64 x86 (64bits)\tx86_64
.ds ppc PowerPC\t\tpowerpc
.ds s390 S/390\t\t390
.in +5
.B \*[title]
.br
\*[arm]
.br
\*[aarch64]
.br
\*[x86]
.br
\*[x86_64]
.br
\*[ppc]
.br
\*[s390]
.in
The default value of
.B ARCH
depends on your architecture.
.TP 5
.B SLACKKEY
.br
Slackpkg checks the package signature file (.asc) against the GPG signature
of the project. Different ports of Slackware can have different signatures,
and Slackpkg tries to find the correct one based on the architecture of your
system. If the automatically-detected
.B SLACKKEY
isn't correct, you can change it using this option.
The default value of
.B SLACKKEY
depends on your Slackware port.
.TP 5
.B TEMP
.br
Defines the location to which slackpkg will download the packages before
installing/upgrading them.
The default value of
.B TEMP
is /var/cache/packages.
.TP 5
.B WORKDIR
.br
Defines the directory for package lists, file lists, and other information
used by slackpkg as it works. Do not change the value of this variable
unless you know what you are doing.
The default value of
.B WORKDIR
is /var/lib/slackpkg.
.TP 5
.B WGETFLAGS
.br
Selects special options for wget. If you need to use multiple options,
remember to put them between double quotes.
The default value of
.B WGETFLAGS
is "\--passive-ftp"
.TP 5
.B DELALL
.br
If set to "on", all downloaded files will be removed after slackpkg performs
install or upgrade (this does NOT have any impact when slackpkg is run with
"download"). If set to "off", the files will be kept in the directory
defined in
.B TEMP
(as described above).
The default value of
.B DELALL
is "on".
.br
From command line, you can use -delall=value.
.TP 5
.B CHECKMD5
.br
Enables (on) or disables (off) the checking of MD5 checksums of all downloaded
packages before installing or upgrading them.
The default value of
.B CHECKMD5
is "on".
.br
From command line, you can use -checkmd5=value.
.TP 5
.B CHECKGPG
.br
Enables (on) or disables (off) the check of GPG signature for each package
before install or upgrade.
The default value of
.B CHECKGPG
is "on".
.br
From command line, you can use -checkgpg=value.
.TP 5
.B CHECKSIZE
.br
Enables (on) or disables (off) the check of available disk space for each
package before install or upgrade.
The default value of
.B CHECKSIZE
is "off".
.br
From command line, you can use -checksize=value.
.TP 5
.B PKGMAIN
.br
Defines the main distribution directory. Usually, you don't need to worry
about this variable, as Slackpkg tries to find it based on your architecture.
However, if you need to change it, then include this variable in your
slackpkg.conf. This should always be the directory which contains the
Slackware package set series (A, AP, D, E, F, ...).
Default: depends on Slackware port
.TP 5
.B PRIORITY
.br
This array selects the priority at which directories on the mirror will have
when slackpkg looks for packages. If a package is found in more than one
place, the package in first directory gets priority, then second, then third,
then fourth and finally, the package found in last listed directory. You can
use %PKGMAIN to use the contents of PKGMAIN variable.
Default values (in order): patches %PKGMAIN extra pasture testing
.TP 5
.B POSTINST
.br
Enables (on) or disables (off) slackpkg's post-installation features, such
as checking for new (*.new) configuration files and new kernel images, and
prompts you for what it should do.
The default value of
.B POSTINST
is "on".
.br
From command line, you can use -postinst=value.
.TP 5
.B ONLY_NEW_DOTNEW
.br
When
.B POSTINST
is set to "on", slackpkg will search for all .new files inside /etc and
prompt the user for what to do with them. However, some users prefer to
see only the .new files installed in slackpkg's last execution, so if
this applies to you, set
.B ONLY_NEW_DOTNEW
to "on".
The default value of
.B ONLY_NEW_DOTNEW
is "off". Only change this if you know what are you doing...
.br
From command line, you can use -only_new_dotnew=value.
.TP 5
.B ORIG_BACKUPS
.br
During integration of .new files during the post installation phase, original
files are backed up to a file name with a .orig extension. To prevent this,
set this option to "off" and note that you will no longer have a copy of the
content of the file prior to it being replaced by the .new version.
The default value of
.B ORIG_BACKUPS
is "on". Only change this if you are sure you don't want backups of
overwritten files.
.br
From the command line, you can use -orig_backups=value.
.TP 5
.B ONOFF
.br
The
.B ONOFF
variable sets the initial behavior of the dialog interface.
If you set this to "on" then all packages will be selected by default.
If you prefer the opposite option (all unchecked), then set this to "off".
The default value of
.B ONOFF
is "on".
.br
From command line, you can use -onoff=value.
.TP 5
.B DOWNLOAD_ALL
.br
If this variable is set to "on", all files will be downloaded before the
requested operation (install or upgrade) is performed. If set to "off",
then the files will be downloaded and the operation (install/upgrade) performed
one by one.
The default value of
.B DOWNLOAD_ALL
is "off".
.br
From command line, you can use -download_all=value.
.TP 5
.B DIALOG
.br
Enables (on) or disables (off) the dialog interface.
The default value of
.B DIALOG
is "on".
.br
From command line, you can use -dialog=value.
.TP 5
.B DIALOG_MAXARGS
.br
Set the max number of characters that will be send to "dialog". If this number
is reached in upgrade, slackpkg removes the information about current installed
version of each package. If even without this information the number is reached
again, slackpkg returns an error to the user.
If
.B DIALOG_MAXARGS
is unset, 19500 is the default value.
.br
From command line, you can use -dialog_maxargs=value.
.TP 5
.B BATCH
.br
Enables (on) or disables (off) the non-interactive mode. When run in batch
mode, slackpkg will not prompt the user for anything; instead, all questions
will get
.B DEFAULT_ANSWER
(see below).
.br
If you perform an upgrade using this mode, you will need to run
"slackpkg new-config" later to find and merge .new files.
The default value of
.B BATCH
is "off".
.br
From command line, you can use -batch=value.
.TP 5
.B DEFAULT_ANSWER
.br
This is the default answer to questions when slackpkg prompts the user for
some information. This is used only in non-interactive mode (when
.B BATCH
is "yes" or the user turns batch mode on via the command line); otherwise,
this variable has no effect.
.br
Valid values are "y" or "n".
The default value of
.B DEFAULT_ANSWER
is "n".
.br
From command line, you can use -default_answer=value.
.TP 5
.B USE_INCLUDES
.br
Slackpkg templates can include other templates. This reduces the package
duplication in many templates, but it can be a problem if you want to remove
only a specific template. You can disable the #include parsing by setting
this option to "off".
The default value of
.B USE_INCLUDES
is "on".
.br
From command line, you can use -use_includes=value.
.TP 5
.B SPINNING
.br
When Slackpkg is doing an activity that takes some time, it gives visual
feedback with a spinning bar. If you don't like the spinning bar, it can be
disabled by setting this option to "off".
The default value of
.B SPINNING
is "on".
.br
From command line, you can use -spinning=value.
.SH FILES
.TP 5
.B /etc/slackpkg/slacpkg.conf
.SH "SEE ALSO"
.BR slackpkg (8)
.BR pkgtool (8)
.BR installpkg (8)
.BR upgradepkg (8)
.BR removepkg (8)