slackware-current/source/a/pkgtools/scripts/makebootdisk
Patrick J Volkerding 7b610e99b4 Sat Apr 24 18:55:05 UTC 2021
a/file-5.40-x86_64-3.txz:  Rebuilt.
  Fix detection of XZ compressed data. Thanks to TommyC7.
a/kernel-firmware-20210423_1334578-noarch-1.txz:  Upgraded.
a/pkgtools-15.0-noarch-40.txz:  Rebuilt.
  Change several script shebangs to #!/bin/bash. Thanks to mumahendras3.
a/sysvinit-scripts-15.0-noarch-3.txz:  Rebuilt.
  inittab: fix label for runlevel 4. Thanks to Fellype.
  rc.4: fix error message for no supported login manager found.
l/libjpeg-turbo-2.1.0-x86_64-1.txz:  Upgraded.
n/fetchmail-6.4.19-x86_64-1.txz:  Upgraded.
2021-04-25 08:59:56 +02:00

443 lines
13 KiB
Bash
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/bin/bash
# Copyright 1995, 1998, 2002, 2005 Patrick Volkerding, Moorhead, Minnesota USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
if [ ! "$UID" = "0" ]; then
echo "You need to be root to run this script."
exit 1
fi
# Was a kernel specified on the command line?
if [ -r "$1" ]; then
KERNEL=$1
KMSG="Using kernel $KERNEL"
else
KMSG="No kernel selected yet"
fi
# Make sure there's a proper temp directory:
TMP=/var/lib/pkgtools/setup/tmp
# If the $TMP directory doesn't exist, create it:
if [ ! -d $TMP ]; then
mkdir -p $TMP
chmod 700 $TMP # no need to leave it open
fi
ROOT_DEVICE="`mount | grep ' on / ' | cut -f 1 -d ' '`"
if mount | grep ' on / ' | grep umsdos 1> /dev/null 2> /dev/null ; then
MOUNT="read-write"
else
MOUNT="read-only"
fi
make_root_device() {
# Make a device:
makedev() {
if [ ! -b $1 ]; then
mknod $1 b $2 $3
chown root.disk $1
chmod 640 $1
fi
}
# Make ide device
# make ide major minor hd1 hd2 (2 base devs for major)
make_ide() {
# Handle base devices:
if [ "$2" = "0" ]; then
makedev $TMP/lilo/dev/$3 $1 $2
return 0
elif [ "$2" = "64" ]; then
makedev $TMP/lilo/dev/$4 $1 $2
return 0
fi
# Must be a partition:
if [ "`expr $2 / 64`" = "0" ]; then
DEV=$3
NUM=$2
else
DEV=$4
NUM=`expr $2 - 64`
fi
makedev $TMP/lilo/dev/$DEV$NUM $1 $2
}
# Make SCSI device
make_scsi() {
# find drive # 0 - 15
DRV=`expr $1 / 16`
NUM=`expr $1 % 16`
if [ "$NUM" = "0" ]; then
NUM=""
fi
if [ "$DRV" = "0" ]; then
makedev $TMP/lilo/dev/sda$NUM 8 $1
elif [ "$DRV" = "1" ]; then
makedev $TMP/lilo/dev/sdb$NUM 8 $1
elif [ "$DRV" = "2" ]; then
makedev $TMP/lilo/dev/sdc$NUM 8 $1
elif [ "$DRV" = "3" ]; then
makedev $TMP/lilo/dev/sdd$NUM 8 $1
elif [ "$DRV" = "4" ]; then
makedev $TMP/lilo/dev/sde$NUM 8 $1
elif [ "$DRV" = "5" ]; then
makedev $TMP/lilo/dev/sdf$NUM 8 $1
elif [ "$DRV" = "6" ]; then
makedev $TMP/lilo/dev/sdg$NUM 8 $1
elif [ "$DRV" = "7" ]; then
makedev $TMP/lilo/dev/sdh$NUM 8 $1
elif [ "$DRV" = "8" ]; then
makedev $TMP/lilo/dev/sdi$NUM 8 $1
elif [ "$DRV" = "9" ]; then
makedev $TMP/lilo/dev/sdj$NUM 8 $1
elif [ "$DRV" = "10" ]; then
makedev $TMP/lilo/dev/sdk$NUM 8 $1
elif [ "$DRV" = "11" ]; then
makedev $TMP/lilo/dev/sdl$NUM 8 $1
elif [ "$DRV" = "12" ]; then
makedev $TMP/lilo/dev/sdm$NUM 8 $1
elif [ "$DRV" = "13" ]; then
makedev $TMP/lilo/dev/sdn$NUM 8 $1
elif [ "$DRV" = "14" ]; then
makedev $TMP/lilo/dev/sdo$NUM 8 $1
elif [ "$DRV" = "15" ]; then
makedev $TMP/lilo/dev/sdp$NUM 8 $1
fi
}
if cat /proc/partitions | grep / 1> /dev/null 2> /dev/null ; then # new
cat /proc/partitions | grep / | while read line ; do
SMASHED_LINE=$line
MAJOR=`echo $SMASHED_LINE | cut -f 1 -d ' '`
MINOR=`echo $SMASHED_LINE | cut -f 2 -d ' '`
if [ "$MAJOR" = "3" ]; then
make_ide $MAJOR $MINOR hda hdb
elif [ "$MAJOR" = "8" ]; then
make_scsi $MINOR
elif [ "$MAJOR" = "22" ]; then
make_ide $MAJOR $MINOR hdc hdd
elif [ "$MAJOR" = "33" ]; then
make_ide $MAJOR $MINOR hde hdf
elif [ "$MAJOR" = "34" ]; then
make_ide $MAJOR $MINOR hdg hdh
elif [ "$MAJOR" = "56" ]; then
make_ide $MAJOR $MINOR hdi hdj
fi
done
else # old format
cat /proc/partitions | grep d | while read line ; do
SMASHED_LINE=$line
MAJOR=`echo $SMASHED_LINE | cut -f 1 -d ' '`
MINOR=`echo $SMASHED_LINE | cut -f 2 -d ' '`
DEVNAME=`echo $SMASHED_LINE | cut -f 4 -d ' '`
makedev $TMP/lilo/dev/$DEVNAME $MAJOR $MINOR
done
fi
}
choose_kernel() {
while [ 0 ]; do # input loop
cat << EOF > $TMP/tmpmsg
Some possible paths to kernels are these:
/boot/vmlinuz
/usr/src/linux/arch/i386/boot/bzImage
/usr/src/linux/arch/i386/boot/zImage
/vmlinuz
Put the path to the kernel you want to use in the box below.
EOF
dialog --title "CHOOSE KERNEL" --inputbox "`cat $TMP/tmpmsg`" \
16 72 "/boot/vmlinuz" 2> $TMP/return
if [ ! $? = 0 ]; then
exit
fi
KERNEL="`cat $TMP/return`"
if [ ! -r "$KERNEL" ]; then
dialog --title "NOT FOUND!" --msgbox "$KERNEL" 5 60
continue
fi
KMSG="Using kernel $KERNEL"
break
done
}
format_disk() {
# If anyone still uses 1.2 MB, you'll have to uncomment this.
# It's no longer a default option.
#FDEV=/dev/fd0h1200
#FDEV=/dev/fd0u1400
FDEV=/dev/fd0u1680
if [ "$FDEV" = "/dev/fd0u1680" ]; then
dialog --title "Formatting /dev/fd0u1680" --infobox \
"Formatting /dev/fd0, 1.68 megabytes." 3 42
elif [ "$FDEV" = "/dev/fd0u1400" ]; then
dialog --title "Formatting /dev/fd0u1440" --infobox \
"Formatting /dev/fd0, 1.44 megabytes." 3 42
elif [ "$FDEV" = "/dev/fd0h1200" ]; then
dialog --title "Formatting /dev/fd0h1200" --infobox \
"Formatting /dev/fd0, 1.2 megabytes." 3 42
fi
fdformat $FDEV 1> /dev/null 2> /dev/null
if [ ! $? = 0 ]; then
dialog --title "ERROR: FLOPPY FORMAT FAILED" --msgbox "The attempt to format the floppy \
disk in /dev/fd0 has failed, probably due to bad media. Please try again with a \
different disk. If that doesn't work, perhaps the drive needs cleaning." 0 0
return 1
fi
}
DEFAULT_ITEM="syslinux"
while [ 0 ]; do # menu loop
dialog --title "MAKE BOOT FLOPPY FROM KERNEL" \
--default-item $DEFAULT_ITEM \
--backtitle "$KMSG" --menu "This menu allows you to make a SYSLINUX bootdisk \
from a compiled kernel. The SYSLINUX bootloader has the advantage of \
using a FAT filesystem making it easy to replace the kernel later. \
Which option would you like?" 12 67 2 \
"syslinux" "Make a SYSLINUX bootdisk" \
"exit" "Exit this program" 2> $TMP/return
if [ ! $? = 0 ]; then
break;
fi
REPLY=`cat $TMP/return`
rm -f $TMP/return
if [ "$REPLY" = "simple" ]; then # make simple bootdisk
if [ "$KERNEL" = "" ]; then
choose_kernel
fi
kernel_size=`du -Lk $KERNEL | cut -f1`
if [ "$kernel_size" -gt "1023" ]; then
cat << EOF > $TMP/tmpmsg
The kernel $KERNEL is $kernel_size K (which is
more than 1023 Kb in size), so it probably won't
boot standalone on the floppy. Use the 'syslinux'
method instead.
EOF
dialog --title "KERNEL TOO BIG!" --msgbox "`cat $TMP/tmpmsg`" 10 60
continue
fi
dialog --title "BOOT DISK CREATION" --backtitle "$KMSG" --yesno \
"\n\
Now put a formatted floppy in your boot drive. \n\
This will be made into your Linux boot disk. Use this to\n\
boot Linux until LILO has been configured to boot from\n\
the hard drive.\n\n\
Any data on the target disk will be destroyed.\n\n\
YES creates the disk, NO aborts.\n" 14 62
if [ $? = 0 ]; then
format_disk
dialog --title "CREATING DISK" --infobox "Creating boot disk from $KERNEL..." 5 72
dd if=$KERNEL of=/dev/fd0 2> /dev/null
rdev /dev/fd0 $ROOT_DEVICE
rdev -v /dev/fd0 -1
if [ "$MOUNT" = "read-only" ]; then
rdev -R /dev/fd0 1
else
rdev -R /dev/fd0 0
fi
fi
elif [ "$REPLY" = "syslinux" ]; then # make syslinux bootdisk
DEFAULT_ITEM="exit"
if [ "$KERNEL" = "" ]; then
choose_kernel
fi
dialog --title "CREATING SYSLINUX BOOTDISK IN /dev/fd0" --backtitle "$KMSG" --yesno "Now put a \
floppy in your boot drive. This will be made into a SYSLINUX \
bootdisk that you can use to start your Linux system. Any data on the \
target disk will be destroyed. YES creates the disk, NO aborts." 8 62
if [ $? = 0 ]; then # make the disk
format_disk
if [ ! $? = 0 ]; then
continue
fi
dialog --title "CREATING BOOT FLOPPY" --infobox "Creating SYSLINUX bootdisk for \
$ROOT_DEVICE in /dev/fd0." 3 64
mkdosfs -F 12 /dev/fd0u1680 1680 1> /dev/null 2> /dev/null
if [ ! -d $TMP/bootdisk ]; then
mkdir $TMP/bootdisk
fi
mount -t vfat /dev/fd0 $TMP/bootdisk 1> /dev/null 2> /dev/null
cp $KERNEL $TMP/bootdisk/vmlinuz
## This avoids a syslinux-1.72 bug, and doesn't seem to hurt anything:
#dd if=/dev/zero bs=1k count=1 >> $TMP/bootdisk/vmlinuz 2> /dev/null
if [ ! "$?" = "0" ]; then
dialog --title "ERROR COPYING KERNEL TO FLOPPY" \
--msgbox "Sorry, but there was an error copying the kernel to the \
floppy disk. Possibly the kernel is too large to fit the disk. \
This program will now exit." 0 0
umount /dev/fd0
rm -rf $TMP/bootdisk
exit 1
fi
cat << EOF > $TMP/bootdisk/message.txt
Welcome to the 09Slackware07 Linux custom bootdisk!
By default, this disk boots a root Linux partition on $ROOT_DEVICE when you
hit ENTER. If you'd like to boot some other partition, use a command like
this on the prompt below:
mount root=/dev/sda1 ro
Where "/dev/sda1" is the partition you want to boot, and "ro" specifies that
the partition should be initially mounted as read-only. If you wish to mount
the partition read-write, use "rw" instead. To set the video console mode,
use the vga= parameter (press F1 to see a table). You may also add any other
kernel parameters you might need depending on your hardware, and which
drivers are included in your kernel.
EOF
cat << EOF > $TMP/bootdisk/syslinux.cfg
default vmlinuz ramdisk_size=7000 root=$ROOT_DEVICE vga=normal ro
prompt 1
timeout 6000
display message.txt
F1 f1.txt
F2 message.txt
#F3 f3.txt
#F4 f4.txt
#F5 f5.txt
#F6 f6.txt
#F7 f7.txt
label mount
kernel vmlinuz
append ramdisk_size=7000 root=$ROOT_DEVICE vga=normal ro
label ramdisk
kernel vmlinuz
append vmlinuz ramdisk_size=7000 root=/dev/fd0u1440 vga=normal rw
EOF
cat << EOF > $TMP/bootdisk/f1.txt
STANDARD MODES:
To make the kernel prompt for standard video modes use: vga=ask
FRAMEBUFFER MODES:
To get the kernel to start in VESA framebuffer mode, you need to pass it
a vga= init string on the "boot:" prompt. Here's a table:
Colors 640x480 800x600 1024x768 1280x1024 1600x1200
--------+---------------------------------------------
256 | 769 771 773 775 796
32,768 | 784 787 790 793 797
65,536 | 785 788 791 794 798
16.8M | 786 789 792 795 799
...such as this for 1024x768x64k:
vga=791
F2 returns to the previous page.
EOF
umount /dev/fd0
syslinux-nomtools -s /dev/fd0
rm -r $TMP/bootdisk
fi
elif [ "$REPLY" = "lilo" ]; then # make lilo bootdisk
DEFAULT_ITEM="exit"
if [ ! -x "`type -path lilo`" ]; then
cat << EOF > $TMP/tmpmsg
You don't have 'lilo' installed on the system.
I guess you didn't install the lilo package.
EOF
dialog --title "LILO NOT FOUND" --msgbox "`cat $TMP/tmpmsg`" 8 60
continue
fi
if [ "$KERNEL" = "" ]; then
choose_kernel
fi
dialog --title "CREATING LILO BOOTDISK IN /dev/fd0" --backtitle "$KMSG" --yesno "Now put a \
floppy in your boot drive. This will be made into a LILO \
bootdisk that you can use to start your Linux system. Any data on the \
target disk will be destroyed. YES creates the disk, NO aborts." 8 62
if [ $? = 0 ]; then # make the disk
format_disk
DEV=/dev/fd0u1680
mknod_fd="-m 0640 $TMP/lilo$DEV b 2 44"
dialog --infobox "Creating LILO bootdisk from $KERNEL for $ROOT_DEVICE..." 4 60
mke2fs -q -m 0 -i 4096 $DEV 1> /dev/null 2> /dev/null || exit 1
if [ ! -d $TMP/lilo ]; then
mkdir -p $TMP/lilo
fi
mount -t ext2 $DEV $TMP/lilo 1> /dev/null || exit 1
rmdir $TMP/lilo/lost+found
cp $KERNEL $TMP/lilo/vmlinuz || exit 1
mkdir $TMP/lilo/dev
make_root_device
mknod -m 0640 $TMP/lilo/dev/fd0 b 2 0
mknod -m 0640 $TMP/lilo/dev/fd1 b 2 1
mknod $mknod_fd
mknod -m 0666 $TMP/lilo/dev/null c 1 3
mkdir $TMP/lilo/etc
cat << EOF > $TMP/lilo/etc/lilo.conf
boot = $DEV
message=/boot/message
backup=/dev/null
prompt
image = /vmlinuz
label = mount
ramdisk = 0
root = $ROOT_DEVICE
vga = normal
$MOUNT
EOF
mkdir $TMP/lilo/boot
cp -a /boot/chain.b $TMP/lilo/boot
if [ -f /boot/boot-text.b ]; then
cp -a /boot/boot-text.b $TMP/lilo/boot/boot.b
else
cp -a /boot/boot.b $TMP/lilo/boot
fi
cat << EOF > $TMP/lilo/boot/message
Welcome to the Slackware Linux custom LILO bootdisk!
By default, this disk boots a root Linux partition on $ROOT_DEVICE when
you hit ENTER. If you'd like to boot some other partition, use a command
like this on the LILO prompt below:
mount root=/dev/sda1 ro
Where "/dev/sda1" is the partition you want to boot, and "ro" specifies that
the partition should be initially mounted as read-only. If you which to mount
the partition read-write, use "rw" instead. You may also add any other kernel
parameters you might need depending on your hardware, and which drivers are
included in your kernel.
EOF
lilo -r $TMP/lilo > /dev/null
umount $TMP/lilo
rm -rf $TMP/lilo
fi
elif [ "$REPLY" = "exit" ]; then
break;
fi
done