mirror of
git://slackware.nl/current.git
synced 2024-12-27 09:59:16 +01:00
5a12e7c134
Wed Aug 26 10:00:38 CDT 2009 Slackware 13.0 x86_64 is released as stable! Thanks to everyone who helped make this release possible -- see the RELEASE_NOTES for the credits. The ISOs are off to the replicator. This time it will be a 6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD. We're taking pre-orders now at store.slackware.com. Please consider picking up a copy to help support the project. Once again, thanks to the entire Slackware community for all the help testing and fixing things and offering suggestions during this development cycle. As always, have fun and enjoy! -P.
276 lines
9.7 KiB
Text
276 lines
9.7 KiB
Text
# /etc/ppp/options
|
|
#
|
|
# $Id: options,v 1.4 1996/05/01 18:57:04 alvar Exp $
|
|
#
|
|
# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
|
|
# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
|
|
# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
|
|
# Modified for Slackware by Pat Volkerding <volkerdi@slackware.com>
|
|
#
|
|
# Use the command egrep -v '#|^ *$' /etc/ppp/options to quickly see what
|
|
# options are active in this file.
|
|
|
|
# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
|
|
# Two Servers can be remotely configured
|
|
# dns-addr 192.168.1.1
|
|
# dns-addr 192.168.1.2
|
|
|
|
# Specify which WINS Servers the incoming connection Win95 or WinNT should use
|
|
# wins-addr 192.168.1.50
|
|
# wins-addr 192.168.1.51
|
|
|
|
# Run the executable or shell command specified after pppd has
|
|
# terminated the link. This script could, for example, issue commands
|
|
# to the modem to cause it to hang up if hardware modem control signals
|
|
# were not available.
|
|
#disconnect "chat -- \d+++\d\c OK ath0 OK"
|
|
|
|
# async character map -- 32-bit hex; each bit is a character
|
|
# that needs to be escaped for pppd to receive it. 0x00000001
|
|
# represents '\x01', and 0x80000000 represents '\x1f'.
|
|
asyncmap 0
|
|
|
|
# Require the peer to authenticate itself before allowing network
|
|
# packets to be sent or received.
|
|
# For a PPP Server with script based logins not using PAP or CHAP
|
|
# you need to disable this setting.
|
|
#auth
|
|
|
|
# Do not require the other end of the connection to authenticate itself.
|
|
# This option is dangerous if pppd is setuid.
|
|
# If you also have ethernet and are having problems getting PPP to connect
|
|
# over a modem, try this option.
|
|
#noauth
|
|
|
|
# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
|
|
# on the serial port.
|
|
crtscts
|
|
|
|
# Use software flow control (i.e. XON/XOFF) to control the flow of data
|
|
# on the serial port.
|
|
#xonxoff
|
|
|
|
# Specifies that certain characters should be escaped on transmission
|
|
# (regardless of whether the peer requests them to be escaped with its
|
|
# async control character map). The characters to be escaped are
|
|
# specified as a list of hex numbers separated by commas. Note that
|
|
# almost any character can be specified for the escape option, unlike
|
|
# the asyncmap option which only allows control characters to be
|
|
# specified. The characters which may not be escaped are those with hex
|
|
# values 0x20 - 0x3f or 0x5e.
|
|
#escape 11,13,ff
|
|
|
|
# Don't use the modem control lines.
|
|
#local
|
|
|
|
# Specifies that pppd should use a UUCP-style lock on the serial device
|
|
# to ensure exclusive access to the device.
|
|
lock
|
|
|
|
# Use the modem control lines. On Ultrix, this option implies hardware
|
|
# flow control, as for the crtscts option. (This option is not fully
|
|
# implemented.)
|
|
modem
|
|
|
|
# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
|
|
# will ask the peer to send packets of no more than <n> bytes. The
|
|
# minimum MRU value is 128. The default MRU value is 1500. A value of
|
|
# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
|
|
# bytes of data).
|
|
#mru 542
|
|
|
|
# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
|
|
# notation (e.g. 255.255.255.0).
|
|
#netmask 255.255.255.0
|
|
|
|
# Disables the default behaviour when no local IP address is specified,
|
|
# which is to determine (if possible) the local IP address from the
|
|
# hostname. With this option, the peer will have to supply the local IP
|
|
# address during IPCP negotiation (unless it specified explicitly on the
|
|
# command line or in an options file).
|
|
#noipdefault
|
|
|
|
# Enables the "passive" option in the LCP. With this option, pppd will
|
|
# attempt to initiate a connection; if no reply is received from the
|
|
# peer, pppd will then just wait passively for a valid LCP packet from
|
|
# the peer (instead of exiting, as it does without this option).
|
|
#passive
|
|
|
|
# With this option, pppd will not transmit LCP packets to initiate a
|
|
# connection until a valid LCP packet is received from the peer (as for
|
|
# the "passive" option with old versions of pppd).
|
|
#silent
|
|
|
|
# Don't request or allow negotiation of any options for LCP and IPCP
|
|
# (use default values).
|
|
#-all
|
|
|
|
# Disable Address/Control compression negotiation (use default, i.e.
|
|
# address/control field disabled).
|
|
#-ac
|
|
|
|
# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
|
|
# all control characters).
|
|
#-am
|
|
|
|
# Don't fork to become a background process (otherwise pppd will do so
|
|
# if a serial device is specified).
|
|
#-detach
|
|
|
|
# Disable IP address negotiation (with this option, the remote IP
|
|
# address must be specified with an option on the command line or in an
|
|
# options file).
|
|
#-ip
|
|
|
|
# Disable magic number negotiation. With this option, pppd cannot
|
|
# detect a looped-back line.
|
|
#-mn
|
|
|
|
# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
|
|
# 1500).
|
|
#-mru
|
|
|
|
# Disable protocol field compression negotiation (use default, i.e.
|
|
# protocol field compression disabled).
|
|
#-pc
|
|
|
|
# Require the peer to authenticate itself using PAP.
|
|
#+pap
|
|
|
|
# Don't agree to authenticate using PAP.
|
|
#-pap
|
|
|
|
# Require the peer to authenticate itself using CHAP [Cryptographic
|
|
# Handshake Authentication Protocol] authentication.
|
|
#+chap
|
|
|
|
# Don't agree to authenticate using CHAP.
|
|
#-chap
|
|
|
|
# Disable negotiation of Van Jacobson style IP header compression (use
|
|
# default, i.e. no compression).
|
|
#-vj
|
|
|
|
# Increase debugging level (same as -d). If this option is given, pppd
|
|
# will log the contents of all control packets sent or received in a
|
|
# readable form. The packets are logged through syslog with facility
|
|
# daemon and level debug. This information can be directed to a file by
|
|
# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
|
|
# pppd is compiled with extra debugging enabled, it will log messages
|
|
# using facility local2 instead of daemon).
|
|
#debug
|
|
|
|
# Append the domain name <d> to the local host name for authentication
|
|
# purposes. For example, if gethostname() returns the name porsche,
|
|
# but the fully qualified domain name is porsche.Quotron.COM, you would
|
|
# use the domain option to set the domain name to Quotron.COM.
|
|
#domain <d>
|
|
|
|
# Enable debugging code in the kernel-level PPP driver. The argument n
|
|
# is a number which is the sum of the following values: 1 to enable
|
|
# general debug messages, 2 to request that the contents of received
|
|
# packets be printed, and 4 to request that the contents of transmitted
|
|
# packets be printed.
|
|
#kdebug n
|
|
|
|
# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
|
|
# requests a smaller value via MRU negotiation, pppd will request that
|
|
# the kernel networking code send data packets of no more than n bytes
|
|
# through the PPP network interface.
|
|
#mtu <n>
|
|
|
|
# Enforce the use of the hostname as the name of the local system for
|
|
# authentication purposes (overrides the name option).
|
|
#usehostname
|
|
|
|
# Set the assumed name of the remote system for authentication purposes
|
|
# to <n>.
|
|
#remotename <n>
|
|
|
|
# Add an entry to this system's ARP [Address Resolution Protocol]
|
|
# table with the IP address of the peer and the Ethernet address of this
|
|
# system.
|
|
proxyarp
|
|
|
|
# Use the system password database for authenticating the peer using
|
|
# PAP. Note: mgetty already provides this option. If this is specified
|
|
# then dialin from users using a script under Linux to fire up ppp wont work.
|
|
# login
|
|
|
|
# If this option is given, pppd will send an LCP echo-request frame to
|
|
# the peer every n seconds. Under Linux, the echo-request is sent when
|
|
# no packets have been received from the peer for n seconds. Normally
|
|
# the peer should respond to the echo-request by sending an echo-reply.
|
|
# This option can be used with the lcp-echo-failure option to detect
|
|
# that the peer is no longer connected.
|
|
lcp-echo-interval 30
|
|
|
|
# If this option is given, pppd will presume the peer to be dead if n
|
|
# LCP echo-requests are sent without receiving a valid LCP echo-reply.
|
|
# If this happens, pppd will terminate the connection. Use of this
|
|
# option requires a non-zero value for the lcp-echo-interval parameter.
|
|
# This option can be used to enable pppd to terminate after the physical
|
|
# connection has been broken (e.g., the modem has hung up) in
|
|
# situations where no hardware modem control lines are available.
|
|
lcp-echo-failure 4
|
|
|
|
# Set the LCP restart interval (retransmission timeout) to <n> seconds
|
|
# (default 3).
|
|
#lcp-restart <n>
|
|
|
|
# Set the maximum number of LCP terminate-request transmissions to <n>
|
|
# (default 3).
|
|
#lcp-max-terminate <n>
|
|
|
|
# Set the maximum number of LCP configure-request transmissions to <n>
|
|
# (default 10).
|
|
#lcp-max-configure <n>
|
|
|
|
# Set the maximum number of LCP configure-NAKs returned before starting
|
|
# to send configure-Rejects instead to <n> (default 10).
|
|
#lcp-max-failure <n>
|
|
|
|
# Set the IPCP restart interval (retransmission timeout) to <n>
|
|
# seconds (default 3).
|
|
#ipcp-restart <n>
|
|
|
|
# Set the maximum number of IPCP terminate-request transmissions to <n>
|
|
# (default 3).
|
|
#ipcp-max-terminate <n>
|
|
|
|
# Set the maximum number of IPCP configure-request transmissions to <n>
|
|
# (default 10).
|
|
#ipcp-max-configure <n>
|
|
|
|
# Set the maximum number of IPCP configure-NAKs returned before starting
|
|
# to send configure-Rejects instead to <n> (default 10).
|
|
#ipcp-max-failure <n>
|
|
|
|
# Set the PAP restart interval (retransmission timeout) to <n> seconds
|
|
# (default 3).
|
|
#pap-restart <n>
|
|
|
|
# Set the maximum number of PAP authenticate-request transmissions to
|
|
# <n> (default 10).
|
|
#pap-max-authreq <n>
|
|
|
|
# Set the CHAP restart interval (retransmission timeout for
|
|
# challenges) to <n> seconds (default 3).
|
|
#chap-restart <n>
|
|
|
|
# Set the maximum number of CHAP challenge transmissions to <n>
|
|
# (default 10).
|
|
#chap-max-challenge
|
|
|
|
# If this option is given, pppd will rechallenge the peer every <n>
|
|
# seconds.
|
|
#chap-interval <n>
|
|
|
|
# With this option, pppd will accept the peer's idea of our local IP
|
|
# address, even if the local IP address was specified in an option.
|
|
#ipcp-accept-local
|
|
|
|
# With this option, pppd will accept the peer's idea of its (remote) IP
|
|
# address, even if the remote IP address was specified in an option.
|
|
#ipcp-accept-remote
|
|
|