slackware-current/source/a/udev/config/rc.d/rc.udev.new

#!/bin/sh
# This is a script to initialize udev, which populates the /dev
# directory with device nodes, scans for devices, loads the
# appropriate kernel modules, and configures the devices.

PATH="/sbin:/bin"

. /etc/udev/udev.conf

# remove trailing slash from udev_root
UDEV_ROOT=$(echo "${udev_root}" |sed 's/\/*$//')

check_mounted() {
  grep -E -q "^[^[:space:]]+ $1 $2" /proc/mounts
  return $?	
}

mount_devpts() {
  if ! check_mounted $UDEV_ROOT/pts devpts ; then
    mkdir $UDEV_ROOT/pts 2> /dev/null
    mount -n -o mode=0620,gid=5 -t devpts devpts $UDEV_ROOT/pts
  fi
}

case "$1" in
    start)
        # Sanity check #1, udev requires that the kernel support devtmpfs:
        if ! grep -wq devtmpfs /proc/filesystems ; then
          echo "Sorry, but you need devtmpfs support in the kernel to use udev."
          echo "Both of these options are needed:  CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y"
          echo
          echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
          sleep 10
          exit 1
        fi

	# Sanity check #2, udev requires that the kernel support tmpfs:
        if ! grep -wq tmpfs /proc/filesystems ; then
          echo "Sorry, but you need tmpfs support in the kernel to use udev."
          echo
          echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
          sleep 10
          exit 1
        fi

        # Sanity check #3, make sure that a 2.6.x kernel is new enough:
        if [ "$(uname -r | cut -f 1,2 -d .)" = "2.6" ]; then
          if [ "$(uname -r | cut -f 3 -d . | sed 's/[^[:digit:]].*//')" -lt "32" ]; then
            echo "Sorry, but you need a 2.6.32+ kernel to use this udev."
            echo "Your kernel version is only $(uname -r)."
            echo
            echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
            sleep 10
            exit 1
          fi
        fi

        # Sanity check #4, make sure the udev package was not removed.  If udevd
        # is not there, this will also shut off this script to prevent further
        # problems:
        if [ ! -x /sbin/udevd ]; then
          chmod 0644 /etc/rc.d/rc.udev
          echo "No udevd daemon found."
          echo "Turning off udev:  chmod 644 /etc/rc.d/rc.udev"
          echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
          sleep 10
          exit 1
        fi

        # Disable hotplug helper since udevd listens to netlink:
        if [ -e /proc/sys/kernel/hotplug ]; then
          echo "" > /proc/sys/kernel/hotplug
        fi

	if grep -qw devtmpfs /proc/filesystems ; then
	   if ! check_mounted $UDEV_ROOT devtmpfs ; then
		# umount shm if needed
		check_mounted $UDEV_ROOT/shm tmpfs && umount -l $UDEV_ROOT/shm

		# Umount pts if needed, we will remount it later:
		check_mounted $UDEV_ROOT/pts devpts && umount -l $UDEV_ROOT/pts
		
		# Mount tmpfs on $UDEV_ROOT:
		mount -n -t devtmpfs devtmpfs $UDEV_ROOT 
	   fi
	else 
		# Mount tmpfs on $UDEV_ROOT:
		if ! check_mounted $UDEV_ROOT tmpfs ; then
		  # umount shm if needed
		  check_mounted $UDEV_ROOT/shm tmpfs && umount -l $UDEV_ROOT/shm

		  # Umount pts if needed, we will remount it later:
		  check_mounted $UDEV_ROOT/pts devpts && umount -l $UDEV_ROOT/pts
		
		  # Mount tmpfs on $UDEV_ROOT:
		  # the -n is because we don't want $UDEV_ROOT umounted when
		  # someone (rc.[06]) calls umount -a
		  mount -n -o mode=0755 -t tmpfs tmpfs $UDEV_ROOT 
		
		fi
	fi
	# Mount devpts
	mount_devpts

        if ! /sbin/pidof udevd 1>/dev/null 2>/dev/null; then # start udevd
          echo "Starting udevd:  /sbin/udevd --daemon"
          /sbin/udevd --daemon
          # Since udev is just now being started we want to use add events:
          echo "Triggering udev events:  /sbin/udevadm trigger --action=add"
          # Call udevtrigger and udevsettle to do the device configuration:
          /sbin/udevadm trigger --type=subsystems --action=add
          /sbin/udevadm trigger --type=devices --action=add
        else # trigger changes for already running udevd
          # If the persistent rules files do not exist, trigger an add event:
          if [ ! -r /etc/udev/rules.d/70-persistent-net.rules ]; then
            # Test that we can actually write to the directory first:
            if touch /etc/udev/rules.d/testfile 2> /dev/null ; then
              rm -f /etc/udev/rules.d/testfile
              # This should add persistent net/cd rules:
              echo "Triggering udev to write persistent rules to /etc/udev/rules.d/"
              /sbin/udevadm trigger --type=devices --action=add
              sleep 3
            fi
          fi
          # Since udevd is running, most of the time we only need change events:
          echo "Triggering udev events:  /sbin/udevadm trigger --action=change"
          /sbin/udevadm trigger --type=subsystems --action=change
          /sbin/udevadm trigger --type=devices --action=change
        fi
        /sbin/udevadm settle --timeout=120
        ;;
    stop)
	echo "Stopping udevd is STRONGLY discouraged and not supported."
	echo "If you are sure you want to do this, use 'force-stop' instead."
	;;
    force-stop)
	echo "Stopping udevd"
	udevadm control --exit
	killall udevd 2>/dev/null
	;;
    restart)
	echo "Restarting udevd is STRONGLY discouraged and not supported."
	echo "If you are sure you want to do this, use 'force-restart' instead."
	;;
    force-restart)
	echo "Restarting udevd"
	udevadm control --exit
	sleep 3
	udevd --daemon
	;;
    reload)
	echo "Reloading udev rules"
	udevadm control --reload
	cp --preserve=all --recursive --update /lib/udev/devices/* $UDEV_ROOT
	;;
    force-reload)
	echo "Updating all available device nodes in $UDEV_ROOT"
	udevadm control --reload
	rm -rf $UDEV_ROOT/.udev $UDEV_ROOT/disk
	cp --preserve=all --recursive --update /lib/udev/devices/* $UDEV_ROOT
	;;
	
    *)
	echo "Usage: $0 {start|stop|restart|reload|force-reload}"
	exit 1
	;;
esac