mirror of
git://slackware.nl/current.git
synced 2024-12-30 10:24:23 +01:00
da4119a5e0
ap/slackpkg-15.0.1-noarch-1.txz: Upgraded.
Tweak default blacklist file's help text (thanks, dive).
Fix display of blacklisted packages.
Tweaks to slack-desc.
Note that kernel-headers should not be blacklisted.
Added Lithuania mirrors (Totoro-kun on LQ).
Fix exit code for pending updates (dive).
Avoid matching txz/tgz etc extension when blacklisting (dive).
Use https for all slackpkg homepage links.
Update mirror files (14.2 -> 15.0).
Add blacklist to search option.
Move applyblacklist to end of makelist().
Clarify how to blacklist duplicate packages.
Fix new-config dialog.
Reduce false positives in DOUBLEFILES detection.
Remove spaces in awk..
More blacklisting fixups (see full commit msg).
Escape plus signs in blacklist regex.
Convert ${ROOT}/${WORKDIR} > ${WORKDIR} (dive).
Convert ${ROOT}/${CONF} -> ${CONF} and tweak blacklists (dive).
Further fixup/enhancement to blacklisting issues.
Fix "slackpkg blacklist" so that it shows blacklist again.
Fixup internal blacklist handling.
Use ERE for sanity_check() function (David Woodfall).
Remove "slackpkg blacklist" from manual pages.
Fix aaa_elflibs --> aaa_libraries in sample blacklist file (mozes).
Split aarch64 and arm mirrors into separate files (mozes).
Allow new-config after slackpkg upgrade itself (PiterPUNK).
Modify blacklist regex line ending.
Thanks to Robby Workman.
ap/sqlite-3.35.2-x86_64-1.txz: Upgraded.
kde/kid3-3.8.6-x86_64-1.txz: Upgraded.
l/glib2-2.66.8-x86_64-1.txz: Upgraded.
l/pango-1.48.3-x86_64-2.txz: Rebuilt.
Eliminate dangling symlink. Thanks to upnort.
n/bind-9.16.13-x86_64-1.txz: Upgraded.
n/links-2.22-x86_64-1.txz: Upgraded.
n/network-scripts-15.0-noarch-14.txz: Rebuilt.
Fix discrepancies between rc.inet1.conf versions.
Move configuration of SLACC before DHCP.
Don't bring up a bridge interface if it will be brought up later by IP config.
Fix a typo in br_open when configuring IFOPTS: i->1.
Add SLAAC security and privacy options.
Fix typo of 'default'.
Added debugging output around new SLAAC enhancements.
Move enabling RA before SLAAC security section. Thanks to davjohn on LQ.
Fix domain name validation checks. Thanks to xbeastx74 on LQ for the report.
Thanks to Darren "Tadgy" Austin and Robby Workman.
n/wireless_tools-30.pre9-x86_64-5.txz: Rebuilt.
rc.wireless: don't leave interfaces in up state as it prevents SLAAC.
Take interface down at exit from rc.wireless. Thanks to davjohn.
x/libgee-0.20.4-x86_64-1.txz: Upgraded.
240 lines
10 KiB
Text
240 lines
10 KiB
Text
# /etc/rc.d/rc.inet1.conf
|
|
#
|
|
# This file contains the configuration settings for network interfaces.
|
|
#
|
|
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
|
|
# If you don't have an interface, leave the settings null ("").
|
|
#
|
|
# You can configure network interfaces other than eth0,eth1... by setting
|
|
# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
|
|
# or empty, it is assumed you're configuring eth<interface>.
|
|
#
|
|
# Several other parameters are available; the end of this file contains a
|
|
# comprehensive set of examples.
|
|
#
|
|
# Important note for IPv6 stateless auto configuration (SLAAC) users:
|
|
# From Slackware 15.0 onwards, you need to set USE_SLAAC[0]="yes" below.
|
|
|
|
# =============================================================================
|
|
|
|
# IPv4 config options for eth0:
|
|
IPADDRS[0]=""
|
|
USE_DHCP[0]=""
|
|
# IPv6 config options for eth0:
|
|
IP6ADDRS[0]=""
|
|
USE_SLAAC[0]=""
|
|
USE_DHCP6[0]=""
|
|
# Generic options for eth0:
|
|
DHCP_HOSTNAME[0]=""
|
|
|
|
# IPv4 config options for eth1:
|
|
IPADDRS[1]=""
|
|
USE_DHCP[1]=""
|
|
# IPv6 config options for eth1:
|
|
IP6ADDRS[1]=""
|
|
USE_SLAAC[1]=""
|
|
USE_DHCP6[1]=""
|
|
# Generic options for eth1:
|
|
DHCP_HOSTNAME[1]=""
|
|
|
|
# IPv4 config options for eth2:
|
|
IPADDRS[2]=""
|
|
USE_DHCP[2]=""
|
|
# IPv6 config options for eth2:
|
|
IP6ADDRS[2]=""
|
|
USE_SLAAC[2]=""
|
|
USE_DHCP6[2]=""
|
|
# Generic options for eth2:
|
|
DHCP_HOSTNAME[2]=""
|
|
|
|
# IPv4 config options for eth3:
|
|
IPADDRS[3]=""
|
|
USE_DHCP[3]=""
|
|
# IPv6 config options for eth3:
|
|
IP6ADDRS[3]=""
|
|
USE_SLAAC[3]=""
|
|
USE_DHCP6[3]=""
|
|
# Generic options for eth3:
|
|
DHCP_HOSTNAME[3]=""
|
|
|
|
# IPv4 default gateway IP address:
|
|
GATEWAY=""
|
|
# IPv6 default gateway IP address:
|
|
GATEWAY6=""
|
|
|
|
# =============================================================================
|
|
|
|
# Example of how to configure a bond (link aggregation) interface.
|
|
# Note the addition of the BONDNICS and BONDMODE parameters.
|
|
# BONDNICS is a space delimited list of interfaces to add to this bond. The
|
|
# BONDNICS interfaces will be brought up and configured while bringing up the
|
|
# bond interface, so do not need to be previously defined in rc.inet1.conf.
|
|
# BONDMODE sets the bonding mode for this interface. If not specified when
|
|
# BONDNICS has been used, the default is 'balance-rr'.
|
|
# IFOPTS is a pipe (|) delimited list of bonding module specific settings to be
|
|
# applied to the interface, and should always include the 'miimon' option when
|
|
# configuring bonding - not using this option will result in network
|
|
# degradation. In 'active-backup' mode, the 'primary' option should also be
|
|
# supplied. When using '802.3ad' mode, set "lacp_rate fast" for faster
|
|
# recovery from an interface failure. In other modes, the 'xmit_hash_policy'
|
|
# should be set. See the /usr/src/linux/Documentation/networking/bonding.txt
|
|
# file (search for "Bonding Driver Options") for the full set of options.
|
|
#IFNAME[0]="bond0"
|
|
#BONDNICS[0]="eth0 eth1"
|
|
#BONDMODE[0]="balance-rr"
|
|
#IFOPTS[0]="xmit_hash_policy layer2+3 | miimon 100"
|
|
#IPADDRS[0]="192.168.0.1/24"
|
|
#USE_DHCP[0]=""
|
|
#DHCP_HOSTNAME[0]=""
|
|
#IP6ADDRS[0]=""
|
|
#USE_SLAAC[0]=""
|
|
#USE_DHCP6[0]=""
|
|
|
|
# =============================================================================
|
|
|
|
# Example of how to configure a VLAN interface:
|
|
# The VLAN ID is taken from the full interface name, which is comprised of the
|
|
# underlying interface name, a period (.) and then the VLAN ID.
|
|
# IFOPTS is a pipe (|) delimited list of VLAN module specific settings to be
|
|
# applied to the interface. See the ip-link(8) man page (search for "VLAN Type
|
|
# Support") for details of the options available. This option is not required
|
|
# for a standard VLAN to be configured.
|
|
#IFNAME[0]="eth0.10"
|
|
#IFOPTS[0]=""
|
|
#IPADDRS[0]="192.168.10.1/24"
|
|
#USE_DHCP[0]=""
|
|
#DHCP_HOSTNAME[0]=""
|
|
#IP6ADDRS[0]=""
|
|
#USE_SLAAC[0]=""
|
|
#USE_DHCP6[0]=""
|
|
|
|
# =============================================================================
|
|
|
|
# Example of how to configure a bridge:
|
|
# Note the added "BRNICS" variable which contains a space-separated list
|
|
# of the physical or virtual network interfaces you want to add to the bridge.
|
|
# IFOPTS is a pipe (|) delimited list of bridge module specific settings to be
|
|
# applied to the interface. See the ip-link(8) man page (search for "BRIDGE
|
|
# Type Support") for details of the options available. This option is not
|
|
# required for a standard bridge to be configured.
|
|
#IFNAME[0]="br0"
|
|
#BRNICS[0]="eth0"
|
|
#IFOPTS[0]=""
|
|
#IPADDRS[0]="192.168.0.1/24"
|
|
#USE_DHCP[0]=""
|
|
#DHCP_HOSTNAME[0]=""
|
|
|
|
# =============================================================================
|
|
|
|
# Virtual interfaces to create - these are created before any address
|
|
# configuration or bridge setup is done, so you may use these interfaces
|
|
# as IFNAME or BRNICS values. These can be tun or tap interfaces:
|
|
# adjust VIRTIFNAME and VIRTIFTYPE accordingly.
|
|
# Starting with VIRTIFNAME[0] is mandatory, and each next one must be
|
|
# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on.
|
|
# Virtual tap interface example
|
|
#VIRTIFNAME[0]="tap0"
|
|
#VIRTIFTYPE[0]="tap"
|
|
#VIRTIFUSER[0]="root"
|
|
#VIRTIFGROUP[0]="root"
|
|
|
|
# Virtual tun interface example
|
|
#VIRTIFNAME[1]="tun0"
|
|
#VIRTIFTYPE[1]="tun"
|
|
#VIRTIFUSER[1]="someuser"
|
|
#VIRTIFGROUP[1]="somegroup"
|
|
|
|
# =============================================================================
|
|
|
|
# Example config information for wlan0:
|
|
# Uncomment the lines you need and fill in your data. You may not need all of
|
|
# these for your wireless network.
|
|
#IFNAME[4]="wlan0"
|
|
#IPADDRS[4]=""
|
|
#USE_DHCP[4]="yes"
|
|
#DHCP_HOSTNAME[4]="icculus-wireless"
|
|
#DHCP_KEEPRESOLV[4]="yes"
|
|
#DHCP_KEEPNTP[4]="yes"
|
|
#DHCP_KEEPGW[4]="yes"
|
|
#DHCP_IPADDR[4]=""
|
|
#WLAN_ESSID[4]=DARKSTAR
|
|
#WLAN_MODE[4]=Managed
|
|
#WLAN_RATE[4]="54M auto"
|
|
#WLAN_CHANNEL[4]="auto"
|
|
#WLAN_KEY[4]="D5A31F54ACF0487C2D0B1C10D2"
|
|
#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
|
|
#WLAN_WPA[4]="wpa_supplicant"
|
|
#WLAN_WPADRIVER[4]="wext"
|
|
#WLAN_WPAWAIT[4]=30
|
|
|
|
# =============================================================================
|
|
|
|
# Some examples of additional network parameters that you can use.
|
|
#IFNAME[4]="wlan0" # Use a different interface name instead of
|
|
# the default 'eth4'
|
|
#IFOPTS[4]="" # A pipe (|) delimited list of interface type
|
|
# specific options to apply. These options
|
|
# can be found in the ip-link(8) man page in
|
|
# the approprite section for the interface
|
|
# type being configured.
|
|
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
|
|
#MTU[4]="" # The default MTU is 1500, but you might need
|
|
# 1360 when you use NAT'ed IPSec traffic.
|
|
#PROMISCUOUS[4]="yes" # Set promiscuous mode on the interface.
|
|
#DHCP_TIMEOUT[4]="15" # The default timeout for the DHCP client to
|
|
# wait for server resonse is 15 seconds, but
|
|
# you might want a shorter or longer wait.
|
|
#DHCP_KEEPRESOLV[4]="yes" # If you don't want /etc/resolv.conf overwritten
|
|
#DHCP_KEEPNTP[4]="yes" # If you don't want ntp.conf overwritten
|
|
#DHCP_KEEPGW[4]="yes" # If you don't want the DHCP server to change
|
|
# your default gateway
|
|
#DHCP_IPADDR[4]="" # Request a specific IP address from the DHCP
|
|
# server
|
|
#DHCP_DEBUG[4]="yes" # Make dhcpcd show verbose diagnostics
|
|
#DHCP_NOIPV4LL[4]="yes" # Do not assign an ipv4ll address when a DHCP
|
|
# server is not found (ipv4ll link-local
|
|
# adresses in the IP range 169.254.0.0/16 are
|
|
# also known as "zeroconf" addresses)
|
|
#SLAAC_TIMEOUT[4]="15" # The default timeout for auto configuration to
|
|
# wait for the interface to come up is 15 sec.
|
|
# Increase the timeout if required.
|
|
#SLAAC_PRIVIPGEN[4]="yes" # When assigning addresses via SLAAC, use the
|
|
# 'private' (RFC7217) address generation method.
|
|
# It is advisable to also set SLAAC_SECRET[x].
|
|
#SLAAC_SECRET[4]="xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx"
|
|
# When SLAAC_PRIVIPGEN[x]="yes" is set, this is
|
|
# the secret to be used. This must be in the
|
|
# form of an IPv6 address. When left unset, a
|
|
# random secret is used (this is the default).
|
|
#SLAAC_TEMPADDR[4]="yes" # Use a temporary address with SLAAC to enhance
|
|
# security.
|
|
#USE_RA[4]="yes" # Accept router advertisements even when SLAAC
|
|
# is disabled on the interface.
|
|
#WLAN_ESSID[4]="DARKSTAR" # An example of how you can override _any_
|
|
# parameter defined in rc.wireless.conf, by
|
|
# prepending 'WLAN_' to the parameter's name.
|
|
# Useful with multiple wireless interfaces.
|
|
#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
|
|
# Some drivers require a private ioctl to be
|
|
# set through the iwpriv command. If more than
|
|
# one is required, you can place them in the
|
|
# IWPRIV parameter (separated with the pipe (|)
|
|
# character, see the example).
|
|
#WLAN_WPA[4]="wpa_supplicant" # Run wpa_supplicant for WPA support
|
|
#WLAN_WPADRIVER[4]="ndiswrapper"# Tell wpa_supplicant to specifically use the
|
|
# ndiswrapper driver (if you leave this empty
|
|
# the 'wext' driver is used by default)
|
|
#WLAN_WPAWAIT[4]="30" # In case it takes long for the WPA association
|
|
# to finish, you can increase the wait time
|
|
# (defaults to 10 seconds)
|
|
|
|
# =============================================================================
|
|
|
|
# Change this to "yes" for debugging output to syslog (if available, stdout if
|
|
# not).
|
|
DEBUG_ETH_UP="no"
|
|
|
|
# MAXNICS is the maximum number of interfaces that will be configured.
|
|
# You may need to increase the MAXNICS value if you have many interfaces, or
|
|
# you use multiple VLANs and/or bridges. The default is 6.
|
|
#MAXNICS="6"
|