mirror of
git://slackware.nl/current.git
synced 2024-12-29 10:25:00 +01:00
6e50489fed
a/pkgtools-15.0-noarch-39.txz: Rebuilt. upgradepkg: revert change where $ROOT/sbin/installpkg is called instead of /sbin/installpkg. Conceptually, this seemed like a nice change (but would have also required removepkg to be called the same way), but it seems to break an established expectation that the pkgtools can be used without them actually being installed in $ROOT. Thanks to alienBOB. a/sysvinit-scripts-15.0-noarch-2.txz: Rebuilt. Use #!/bin/bash for these scripts so that bashisms don't cause script issues if /bin/sh is some other shell. Thanks to mumahendras3. rc.S: Use GazL's proposals for detecting/mounting /proc and /sys. d/parallel-20210422-noarch-1.txz: Upgraded. l/glib-networking-2.68.1-x86_64-1.txz: Upgraded. l/gtk+3-3.24.29-x86_64-1.txz: Upgraded. x/igt-gpu-tools-1.26-x86_64-1.txz: Upgraded. isolinux/initrd.img: Rebuilt. Rebuild with pkgtools-15.0-noarch-39. usb-and-pxe-installers/usbboot.img: Rebuilt. Rebuild with pkgtools-15.0-noarch-39.
725 lines
27 KiB
Bash
725 lines
27 KiB
Bash
#!/bin/sh
|
|
# Copyright 1994, 1998, 2000 Patrick Volkerding, Concord, CA, USA
|
|
# Copyright 2001, 2003 Slackware Linux, Inc., Concord, CA, USA
|
|
# Copyright 2007, 2009, 2011, 2017, 2018, 2019, 2020 Patrick Volkerding, Sebeka, MN, USA
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use of this script, with or without modification, is
|
|
# permitted provided that the following conditions are met:
|
|
#
|
|
# 1. Redistributions of this script must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
|
|
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
# Wed Apr 1 21:59:41 UTC 2020
|
|
# If the package contains /install/douninst.sh, copy the uninstall script to
|
|
# $ADM_DIR/douninst.sh/$shortname and add the filename to the package list
|
|
# in $ADM_DIR/packages/$shortname.
|
|
#
|
|
# Fri Oct 4 06:04:39 UTC 2019
|
|
# Add support for --no-overwrite so that upgradepkg can be kind to SSDs.
|
|
#
|
|
# Mon Jun 4 21:17:58 UTC 2018
|
|
# Migrate the package database and directories from /var/log to
|
|
# /var/lib/pkgtools. /var/log was never a good place for this data, as it is
|
|
# considered by many to be a directory that could be wiped to free up some
|
|
# space. Originally the package database was in /var/adm, but the FSSTND
|
|
# (later FHS) group decided that directory should be a symlink to /var/log,
|
|
# and I went along with that since it was years ago and I was a n00b and didn't
|
|
# know any better. /var/lib/pkgtools will be a better and safer location.
|
|
#
|
|
# Thu May 24 20:23:55 UTC 2018
|
|
# Added --terselength option to set the line length in --terse mode.
|
|
# Allow adding NOLOCK in an install script to allow it to run without locking.
|
|
#
|
|
# Sat May 19 22:42:03 UTC 2018
|
|
# Implement locking to prevent screen output or install script collisions if
|
|
# multiple copies of installpkg are running simultaneously.
|
|
# Use ${MCOOKIE} instead of $$ (might as well, since we already generated it).
|
|
#
|
|
# Tue Apr 17 17:26:44 UTC 2018
|
|
# Quit with the funny business in /install. Note however that /install still
|
|
# isn't a safe directory to use in a package for anything other than package
|
|
# metadata. Other files placed there are going to be left on the system in
|
|
# /installpkg-$(mcookie). That could be worked around, but we'll wait until
|
|
# someone reports there is a need. The main reason to do this is that /install
|
|
# was a collision point if more than one copy of installpkg was running at
|
|
# once. With this change, the pkgtools are (more or less) thread-safe.
|
|
#
|
|
# Tue Feb 13 01:19:46 UTC 2018
|
|
# Use recent tar, and support restoring POSIX ACLs and extended attributes.
|
|
#
|
|
# Tue Dec 12 21:49:48 UTC 2017
|
|
# If possible, use multiple decompression threads.
|
|
#
|
|
# Thu Dec 7 04:09:17 UTC 2017
|
|
# Change meaning of .tlz to tar.lz (lzip)
|
|
#
|
|
# Sun Sep 6 21:58:36 BST 2009
|
|
# Replaced usage of "cat" with STDIN redirection or file name parameters
|
|
# to speed up execution on ARM.
|
|
# Replaced pkgbase & package_name code with 'sed' script by Jim Hawkins.
|
|
#
|
|
# Sat Apr 25 21:18:53 UTC 2009
|
|
# Converted to use new pkgbase() function to remove pathname and
|
|
# valid package extensions.
|
|
#
|
|
# Sat Apr 4 22:58:06 CDT 2009
|
|
# Support additional compression formats if the supporting utilities exist:
|
|
# .tbz - bzip2
|
|
# .tlz - lzma
|
|
# .txz - xz (also LZMA)
|
|
# And of course, .tgz (gzip) is not going anywhere. :-) <volkerdi>
|
|
# Add command switches to determine the uncompressed package size even if
|
|
# that will slow things down, and to add the package's md5sum to the
|
|
# metadata stored in /var/log/packages/.
|
|
#
|
|
# Fri Dec 21 17:21:35 CST 2007
|
|
# Added a patch from Johnny Morano to work around package removal issues
|
|
# caused by packages that do not comply with FHS combined with a grep
|
|
# regex error in installpkg. Any package with a single-letter top-
|
|
# level directory could not be removed.
|
|
#
|
|
# Shortened some of the top-line dialog output to avoid overflowing the
|
|
# textbox (needed as some of the packages, especially in X, have very
|
|
# long base package names now). <pjv>
|
|
#
|
|
# Sun Nov 26 12:38:25 CST 1995
|
|
# Added patch from Glenn Moloney <glenn@physics.unimelb.edu.au> to allow
|
|
# packages to be installed to directories other than /.
|
|
#
|
|
# Wed Mar 18 15:15:51 CST 1998
|
|
# Changed $TMP directory to /var/log/setup/tmp, and chmod'ed it 700 to close
|
|
# some security holes.
|
|
|
|
# Return a package name that has been stripped of the dirname portion
|
|
# and any of the valid extensions (only):
|
|
pkgbase() {
|
|
# basename + strip extensions .tbz, .tgz, .tlz and .txz
|
|
echo "$1" | sed 's?.*/??;s/\.t[bglx]z$//'
|
|
}
|
|
|
|
# If installpkg encounters a problem, it will return a non-zero error code.
|
|
# If it finds more than one problem (i.e. with a list of packages) you'll only
|
|
# hear about the most recent one. :)
|
|
# 1 = tar returned error code
|
|
# 2 = corrupt compression envelope
|
|
# 3 = does not end in .tgz
|
|
# 4 = no such file
|
|
# 5 = external compression utility missing
|
|
# 99 = user abort from menu mode
|
|
EXITSTATUS=0
|
|
|
|
# Do not store md5sums by default:
|
|
MD5SUM=0
|
|
|
|
# So that we know what to expect...
|
|
umask 022
|
|
|
|
# If we have mcookie and a tar that is recent enough to support --transform,
|
|
# then we can stop needlessly erasing files in the /install directory while
|
|
# also making installpkg thread-safe. Don't check for recent tar - we'll
|
|
# already break from --attrs and --xattrs anyway if the wrong tar is used.
|
|
if which mcookie 1> /dev/null 2> /dev/null ; then
|
|
MCOOKIE=$(mcookie)
|
|
INSTDIR=installpkg-${MCOOKIE}
|
|
else
|
|
# Well, we will make due with this:
|
|
MCOOKIE=$$
|
|
INSTDIR=installpkg-${MCOOKIE}
|
|
fi
|
|
|
|
# Create a lockfile directory if it doesn't exist. We can use it to prevent
|
|
# screen corruption (from multiple dialogs) and install script collisions
|
|
# (from multiple scripts trying to work on the same files) in the case of
|
|
# parallel instances of installpkg.
|
|
INSTLOCKDIR=${INSTLOCKDIR:-/run/lock/pkgtools}
|
|
if [ ! -d $INSTLOCKDIR ]; then
|
|
mkdir -p $INSTLOCKDIR
|
|
fi
|
|
|
|
usage() {
|
|
cat << EOF
|
|
Usage: installpkg [options] <package_filename>
|
|
|
|
Installpkg is used to install a .t{gz,bz,lz,xz} package like this:
|
|
installpkg slackware-package-1.0.0-i486-1.tgz (or .tbz, .tlz, .txz)
|
|
|
|
options: --warn (warn if files will be overwritten, but do not install)
|
|
--root /mnt (install someplace else, like /mnt)
|
|
--infobox (use dialog to draw an info box)
|
|
--terse (display a one-line short description for install)
|
|
--terselength <length> (line length in terse mode - default is
|
|
the number of columns available)
|
|
--menu (confirm package installation with a menu, unless
|
|
the priority is [required] or ADD)
|
|
--ask (used with menu mode: always ask if a package should be
|
|
installed regardless of what the package's priority is)
|
|
--priority ADD|REC|OPT|SKP (provide a priority for the entire
|
|
package list to use instead of the priority in the
|
|
tagfile)
|
|
--tagfile /somedir/tagfile (specify a different file to use
|
|
for package priorities. The default is "tagfile" in
|
|
the package's directory)
|
|
--threads <number> For xz/plzip compressed packages, set the max
|
|
number of threads to be used for decompression. Only has
|
|
an effect if a multithreaded compressor was used, and then
|
|
only on large packages. For plzip, the default is equal to
|
|
the number of CPU threads available on the machine. For xz,
|
|
the default is equal to 2.
|
|
--md5sum (record the package's md5sum in the metadata file)
|
|
--no-overwrite When extracting the package, do not overwrite
|
|
existing files. Usually, this option should not be used.
|
|
It exists so that upgradepkg can use it for the second
|
|
installation pass. The first pass has already overwritten
|
|
the previous package's files, and this will catch the few
|
|
corner cases without generating unnecessary writes.
|
|
|
|
EOF
|
|
}
|
|
|
|
# Eliminate whitespace function:
|
|
crunch() {
|
|
while read FOO ; do
|
|
echo $FOO
|
|
done
|
|
}
|
|
|
|
# Strip version, architecture and build from the end of the name
|
|
package_name() {
|
|
pkgbase $1 | sed 's?-[^-]*-[^-]*-[^-]*$??'
|
|
}
|
|
|
|
# Set maximum number of threads to use. By default, this will be the number
|
|
# of CPU threads:
|
|
THREADS="$(nproc)"
|
|
|
|
# Set default line length for terse mode:
|
|
if tty -s && which tput 1> /dev/null 2> /dev/null ; then
|
|
TERSELENGTH=$(tput cols)
|
|
else
|
|
TERSELENGTH=80
|
|
fi
|
|
|
|
# Default install mode is standard text mode:
|
|
MODE=install
|
|
# If $TERSE is set to 0 in the environment, then use terse mode:
|
|
if [ "$TERSE" = "0" ]; then
|
|
MODE=terse
|
|
fi
|
|
|
|
# Parse options:
|
|
while [ 0 ]; do
|
|
if [ "$1" = "-warn" -o "$1" = "--warn" ]; then
|
|
MODE=warn
|
|
shift 1
|
|
elif [ "$1" = "-md5sum" -o "$1" = "--md5sum" ]; then
|
|
MD5SUM=1
|
|
shift 1
|
|
elif [ "$1" = "-infobox" -o "$1" = "--infobox" ]; then
|
|
MODE=infobox
|
|
shift 1
|
|
elif [ "$1" = "-terse" -o "$1" = "--terse" ]; then
|
|
MODE=terse
|
|
shift 1
|
|
elif [ "$1" = "-terselength" -o "$1" = "--terselength" ]; then
|
|
TERSELENGTH=$2
|
|
shift 2
|
|
elif [ "$1" = "-menu" -o "$1" = "--menu" ]; then
|
|
MODE=menu
|
|
shift 1
|
|
elif [ "$1" = "-ask" -o "$1" = "--ask" ]; then
|
|
ALWAYSASK="yes"
|
|
shift 1
|
|
elif [ "$1" = "--no-overwrite" ]; then
|
|
NO_OVERWRITE=" --skip-old-files "
|
|
shift 1
|
|
elif [ "$1" = "-tagfile" -o "$1" = "--tagfile" ]; then
|
|
if [ -r "$2" ]; then
|
|
USERTAGFILE="$2"
|
|
elif [ -r "$(pwd)/$2" ]; then
|
|
USERTAGFILE="$(pwd)/$2"
|
|
else
|
|
usage
|
|
exit
|
|
fi
|
|
shift 2
|
|
elif [ "$1" = "-threads" -o "$1" = "--threads" ]; then
|
|
THREADS="$2"
|
|
shift 2
|
|
# xz has not yet implemented multi-threaded decompression.
|
|
# Who knows if or how well it will work...
|
|
XZ_THREADS_FORCED=yes
|
|
elif [ "$1" = "-priority" -o "$1" = "--priority" ]; then
|
|
if [ "$2" = "" ]; then
|
|
usage
|
|
exit
|
|
fi
|
|
USERPRIORITY="$2"
|
|
shift 2
|
|
elif [ "$1" = "-root" -o "$1" = "--root" ]; then
|
|
if [ "$2" = "" ]; then
|
|
usage
|
|
exit
|
|
fi
|
|
ROOT="$2"
|
|
shift 2
|
|
else
|
|
break
|
|
fi
|
|
done
|
|
|
|
# Set the prefix for the package database directories (packages, scripts).
|
|
ADM_DIR="$ROOT/var/lib/pkgtools"
|
|
|
|
# Set the prefix for the removed packages/scripts log files:
|
|
LOG_DIR="$ROOT/var/log/pkgtools"
|
|
|
|
# If the directories don't exist, "initialize" the package database:
|
|
for PKGDBDIR in douninst.sh packages scripts setup ; do
|
|
if [ ! -d $ADM_DIR/$PKGDBDIR ]; then
|
|
mkdir -p $ADM_DIR/$PKGDBDIR
|
|
chmod 755 $ADM_DIR/$PKGDBDIR
|
|
fi
|
|
done
|
|
for PKGLOGDIR in removed_packages removed_scripts ; do
|
|
if [ ! -d $LOG_DIR/$PKGLOGDIR ]; then
|
|
rm -rf $LOG_DIR/$PKGLOGDIR # make sure it's not a symlink or something stupid
|
|
mkdir -p $LOG_DIR/$PKGLOGDIR
|
|
chmod 755 $LOG_DIR/$PKGLOGDIR
|
|
fi
|
|
done
|
|
# Likewise, make sure that the symlinks in /var/log exist. We no longer
|
|
# trust anything to remain in /var/log. Let the admin wipe it if that's
|
|
# what they like.
|
|
for symlink in packages scripts setup ; do
|
|
if [ ! -L $LOG_DIR/../$symlink -a ! -d $LOG_DIR/../$symlink ]; then
|
|
( cd $LOG_DIR/.. ; ln -sf ../lib/pkgtools/$symlink . )
|
|
fi
|
|
done
|
|
|
|
# Make sure there's a proper temp directory:
|
|
TMP=$ADM_DIR/setup/tmp
|
|
# If the $TMP directory doesn't exist, create it:
|
|
if [ ! -d $TMP ]; then
|
|
mkdir -p $TMP
|
|
chmod 700 $TMP # no need to leave it open
|
|
fi
|
|
|
|
# usage(), exit if called with no arguments:
|
|
if [ $# = 0 ]; then
|
|
usage;
|
|
exit
|
|
fi
|
|
|
|
# If -warn mode was requested, produce the output and then exit:
|
|
if [ "$MODE" = "warn" ]; then
|
|
while [ -f "$1" ]; do
|
|
mkdir -p $TMP/scan${MCOOKIE}
|
|
# Determine extension:
|
|
packageext="$( echo $1 | rev | cut -f 1 -d . | rev)"
|
|
# Determine decompressor utility:
|
|
case $packageext in
|
|
'tgz' )
|
|
packagecompression=gzip
|
|
;;
|
|
'tbz' )
|
|
if which lbzip2 1> /dev/null 2> /dev/null ; then
|
|
packagecompression=lbzip2
|
|
else
|
|
packagecompression=bzip2
|
|
fi
|
|
;;
|
|
'tlz' )
|
|
if which plzip 1> /dev/null 2> /dev/null ; then
|
|
packagecompression="plzip --threads=${THREADS}"
|
|
elif which lzip 1> /dev/null 2> /dev/null ; then
|
|
packagecompression=lzip
|
|
else
|
|
echo "ERROR: lzip compression utility not found in \$PATH."
|
|
exit 3
|
|
fi
|
|
;;
|
|
'txz' )
|
|
if [ ! "$XZ_THREADS_FORCED" = "yes" ]; then
|
|
packagecompression="xz --threads=${THREADS}"
|
|
else
|
|
packagecompression="xz --threads=2"
|
|
fi
|
|
;;
|
|
esac
|
|
( cd $TMP/scan${MCOOKIE} ; $packagecompression -dc | tar xf - install ) < $1 2> /dev/null
|
|
if [ -r $TMP/scan${MCOOKIE}/install/doinst.sh ]; then
|
|
if grep ' rm -rf ' $TMP/scan${MCOOKIE}/install/doinst.sh 1>/dev/null 2>/dev/null ; then
|
|
grep ' rm -rf ' $TMP/scan${MCOOKIE}/install/doinst.sh > $TMP/scan${MCOOKIE}/install/delete
|
|
for f in `cat $TMP/scan${MCOOKIE}/install/delete | cut -f 3,7 -d ' ' | tr ' ' '/'`; do
|
|
f="/$f"
|
|
if [ -f "$f" -o -L "$f" ]; then
|
|
echo "$f"
|
|
fi
|
|
done
|
|
fi
|
|
if [ -d $TMP/scan${MCOOKIE} ]; then
|
|
( cd $TMP/scan${MCOOKIE} ; rm -rf install ) 2> /dev/null
|
|
( cd $TMP ; rmdir scan${MCOOKIE} ) 2> /dev/null
|
|
fi
|
|
fi
|
|
for f in `( $packagecompression -dc | tar tf - ) < $1 | grep -v 'drwx'`; do
|
|
f="/$f"
|
|
if [ -f "$f" -o -L "$f" ]; then
|
|
echo "$f"
|
|
fi
|
|
done
|
|
shift 1
|
|
done
|
|
exit
|
|
fi
|
|
|
|
# Main loop:
|
|
for package in $* ; do
|
|
|
|
# Simple package integrity check:
|
|
if [ ! -f $package ]; then
|
|
EXITSTATUS=4
|
|
if [ "$MODE" = "install" ]; then
|
|
echo "Cannot install $package: file not found"
|
|
fi
|
|
continue;
|
|
fi
|
|
|
|
# "shortname" isn't really THAT short...
|
|
# it's just the full name without ".t{gz,bz,lz,xz}"
|
|
shortname="$(pkgbase $package)"
|
|
packagedir="$(dirname $package)"
|
|
# This is the base package name, used for grepping tagfiles and descriptions:
|
|
packagebase="$(package_name $shortname)"
|
|
|
|
# Reject package if it does not end in '.t{gz,bz,lz,xz}':
|
|
if [ "$shortname" = "$(basename $package)" ]; then
|
|
EXITSTATUS=3
|
|
if [ "$MODE" = "install" ]; then
|
|
echo "Cannot install $package: file does not end in .tgz, .tbz, .tlz, or .txz"
|
|
fi
|
|
continue;
|
|
fi
|
|
|
|
# Determine extension:
|
|
packageext="$(echo $package | rev | cut -f 1 -d . | rev)"
|
|
|
|
# Determine compressor utility:
|
|
case $packageext in
|
|
'tgz' )
|
|
packagecompression=gzip
|
|
;;
|
|
'tbz' )
|
|
if which lbzip2 1> /dev/null 2> /dev/null ; then
|
|
packagecompression=lbzip2
|
|
else
|
|
packagecompression=bzip2
|
|
fi
|
|
;;
|
|
'tlz' )
|
|
if which plzip 1> /dev/null 2> /dev/null ; then
|
|
packagecompression="plzip --threads=${THREADS}"
|
|
elif which lzip 1> /dev/null 2> /dev/null ; then
|
|
packagecompression=lzip
|
|
else
|
|
echo "ERROR: lzip compression utility not found in \$PATH."
|
|
exit 3
|
|
fi
|
|
;;
|
|
'txz' )
|
|
if [ ! "$XZ_THREADS_FORCED" = "yes" ]; then
|
|
packagecompression="xz --threads=${THREADS}"
|
|
else
|
|
packagecompression="xz --threads=2"
|
|
fi
|
|
;;
|
|
esac
|
|
|
|
# Test presence of external compression utility:
|
|
if ! $(echo $packagecompression | cut -f 1 -d ' ') --help 1> /dev/null 2> /dev/null ; then
|
|
EXITSTATUS=5
|
|
if [ "$MODE" = "install" ]; then
|
|
echo "Cannot install $package: external compression utility $packagecompression missing"
|
|
fi
|
|
continue;
|
|
fi
|
|
|
|
# Determine package's priority:
|
|
unset PRIORITY
|
|
if [ "$USERTAGFILE" = "" ]; then
|
|
TAGFILE="$packagedir/tagfile"
|
|
else
|
|
TAGFILE="$USERTAGFILE"
|
|
fi
|
|
if [ ! -r "$TAGFILE" ]; then
|
|
TAGFILE=/dev/null
|
|
fi
|
|
if grep "^$packagebase:" "$TAGFILE" | grep ADD > /dev/null 2> /dev/null ; then
|
|
PRIORITY="ADD"
|
|
elif grep "^$packagebase:" "$TAGFILE" | grep REC > /dev/null 2> /dev/null ; then
|
|
PRIORITY="REC"
|
|
elif grep "^$packagebase:" "$TAGFILE" | grep OPT > /dev/null 2> /dev/null ; then
|
|
PRIORITY="OPT"
|
|
elif grep "^$packagebase:" "$TAGFILE" | grep SKP > /dev/null 2> /dev/null ; then
|
|
PRIORITY="SKP"
|
|
fi
|
|
if [ "$PRIORITY" = "ADD" ]; then
|
|
PMSG="[ADD]"
|
|
elif [ "$PRIORITY" = "REC" ]; then
|
|
PMSG="[REC]"
|
|
elif [ "$PRIORITY" = "OPT" ]; then
|
|
PMSG="[OPT]"
|
|
elif [ "$PRIORITY" = "SKP" ]; then
|
|
PMSG="[SKP]"
|
|
else
|
|
PMSG=""
|
|
fi
|
|
|
|
# If a tagfile wants this package to be skipped, do that now before
|
|
# wasting any more CPU on it:
|
|
if [ "$PRIORITY" = "SKP" -a ! "$ALWAYSASK" = "yes" ]; then
|
|
continue # next package
|
|
fi
|
|
|
|
# Figure out some package information, like the compressed and uncompressed
|
|
# sizes, and where to find the package description:
|
|
COMPRESSED="$(/bin/du -sh "$(readlink -f $package)" | cut -f 1)"
|
|
DESCRIPTION=""
|
|
# First check for .txt file next to the package, since this is faster:
|
|
if grep "^$packagebase:" "$packagedir/$shortname.txt" 1> /dev/null 2> /dev/null ; then
|
|
DESCRIPTION="$packagedir/$shortname.txt"
|
|
elif grep "^$shortname:" "$packagedir/$shortname.txt" 1> /dev/null 2> /dev/null ; then
|
|
DESCRIPTION="$packagedir/$shortname.txt"
|
|
fi
|
|
|
|
# Test tarball integrity and get uncompressed package size:
|
|
if [ "$MODE" = "install" ]; then
|
|
echo "Verifying package $(basename $package)."
|
|
fi
|
|
cat $package | $packagecompression -dc | LC_ALL=C dd 2> $TMP/tmpsize${MCOOKIE} | tar tf - 2> /dev/null 1> $TMP/tmplist${MCOOKIE}
|
|
TARERROR=$?
|
|
if [ ! "$TARERROR" = "0" ]; then
|
|
EXITSTATUS=1 # tar file corrupt
|
|
if [ "$MODE" = "install" ]; then
|
|
echo "Unable to install $package: tar archive is corrupt (tar returned error code $TARERROR)"
|
|
fi
|
|
rm -f $TMP/tmplist${MCOOKIE} $TMP/tmpsize${MCOOKIE}
|
|
continue
|
|
fi
|
|
UNCOMPRESSED="$(cat $TMP/tmpsize${MCOOKIE} | tail -n 1 | cut -f 1 -d ' ' | numfmt --to=iec)"
|
|
rm -f $TMP/tmpsize${MCOOKIE}
|
|
|
|
# If we still don't have a package description, look inside the package.
|
|
# This requires a costly untar.
|
|
if [ "$DESCRIPTION" = "" ]; then
|
|
mkdir -p $TMP/scan${MCOOKIE}
|
|
( cd $TMP/scan${MCOOKIE} ; $packagecompression -dc | tar xf - install ) < $package 2> /dev/null
|
|
if grep "^$packagebase:" "$TMP/scan${MCOOKIE}/install/slack-desc" 1> /dev/null 2> /dev/null ; then
|
|
DESCRIPTION="$TMP/scan${MCOOKIE}/install/slack-desc"
|
|
elif grep "^$shortname:" "$TMP/scan${MCOOKIE}/install/slack-desc" 1> /dev/null 2> /dev/null ; then
|
|
DESCRIPTION="$TMP/scan${MCOOKIE}/install/slack-desc"
|
|
fi
|
|
fi
|
|
|
|
if [ "$DESCRIPTION" = "" ]; then
|
|
#echo "WARNING NO SLACK-DESC"
|
|
DESCRIPTION="/dev/null"
|
|
fi
|
|
|
|
# Gather package infomation into a temporary file:
|
|
grep "^$packagebase:" $DESCRIPTION | cut -f 2- -d : | cut -b2- 1> $TMP/tmpmsg${MCOOKIE} 2> /dev/null
|
|
if [ "$shortname" != "$packagebase" ]; then
|
|
grep "^$shortname:" $DESCRIPTION | cut -f 2- -d : | cut -b2- 1>> $TMP/tmpmsg${MCOOKIE} 2> /dev/null
|
|
fi
|
|
# Adjust the length here. This allows a slack-desc to be any size up to 13 lines instead of fixed at 11.
|
|
LENGTH=$(wc -l < $TMP/tmpmsg${MCOOKIE} )
|
|
while [ $LENGTH -lt 12 ]; do
|
|
echo >> $TMP/tmpmsg${MCOOKIE}
|
|
LENGTH=$(expr $LENGTH + 1)
|
|
done
|
|
echo "Size: Compressed: ${COMPRESSED}, uncompressed: ${UNCOMPRESSED}." >> $TMP/tmpmsg${MCOOKIE}
|
|
# For recent versions of dialog it is necessary to add \n to the end of each line
|
|
# or it will remove repeating spaces and mess up our careful formatting:
|
|
cat << EOF > $TMP/controlns${MCOOKIE}
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
\n
|
|
EOF
|
|
paste -d "" $TMP/tmpmsg${MCOOKIE} $TMP/controlns${MCOOKIE} > $TMP/pasted${MCOOKIE}
|
|
rm -f $TMP/controlns${MCOOKIE}
|
|
mv $TMP/pasted${MCOOKIE} $TMP/tmpmsg${MCOOKIE}
|
|
# Emit information to the console:
|
|
if [ "$MODE" = "install" ]; then
|
|
if [ "$PMSG" = "" ]; then
|
|
echo "Installing package $(basename $package):"
|
|
else
|
|
echo "Installing package $(basename $package) $PMSG:"
|
|
fi
|
|
echo "PACKAGE DESCRIPTION:"
|
|
grep "^$packagebase:" $DESCRIPTION | uniq | sed "s/^$packagebase:/#/g"
|
|
if [ "$shortname" != "$packagebase" ]; then
|
|
grep "^$shortname:" $DESCRIPTION | uniq | sed "s/^$shortname:/#/g"
|
|
fi
|
|
elif [ "$MODE" = "terse" ]; then # emit a single description line
|
|
( flock 9 || exit 11
|
|
printf "%-$(expr $TERSELENGTH - 8)s %-6s\n" "$(echo $shortname: $(echo $(cat $DESCRIPTION | grep "^$packagebase:" | sed "s/^$packagebase: //g" | head -n 1 | tr -d '()' | sed "s/^$packagebase //g" ) $(echo " $(printf '.%.0s' {1..256})")) | cut -b1-$(expr $TERSELENGTH - 8))" "$(printf "[%5s]" $UNCOMPRESSED)" | cut -b 1-${TERSELENGTH}
|
|
) 9> $INSTLOCKDIR/dialog.lock
|
|
elif [ "$MODE" = "infobox" ]; then # install infobox package
|
|
( flock 9 || exit 11
|
|
dialog --title "Installing package $shortname $PMSG" --infobox "$(cat $TMP/tmpmsg${MCOOKIE})" 0 0
|
|
) 9> $INSTLOCKDIR/dialog.lock
|
|
elif [ "$MODE" = "menu" -a "$PRIORITY" = "ADD" -a ! "$ALWAYSASK" = "yes" ]; then # ADD overrides menu mode unless -ask was used
|
|
( flock 9 || exit 11
|
|
dialog --title "Installing package $shortname $PMSG" --infobox "$(cat $TMP/tmpmsg${MCOOKIE})" 0 0
|
|
) 9> $INSTLOCKDIR/dialog.lock
|
|
elif [ "$MODE" = "menu" -a "$USERPRIORITY" = "ADD" ]; then # install no matter what $PRIORITY
|
|
( flock 9 || exit 11
|
|
dialog --title "Installing package $shortname $PMSG" --infobox "$(cat $TMP/tmpmsg${MCOOKIE})" 0 0
|
|
) 9> $INSTLOCKDIR/dialog.lock
|
|
else # we must need a full menu:
|
|
( flock 9 || exit 11
|
|
dialog --title "Package Name: $shortname $PMSG" --menu "$(cat $TMP/tmpmsg${MCOOKIE})" 0 0 3 \
|
|
"Yes" "Install package $shortname" \
|
|
"No" "Do not install package $shortname" \
|
|
"Quit" "Abort software installation completely" 2> $TMP/reply${MCOOKIE}
|
|
if [ ! $? = 0 ]; then
|
|
echo "No" > $TMP/reply${MCOOKIE}
|
|
fi
|
|
) 9> $INSTLOCKDIR/dialog.lock
|
|
REPLY="$(cat $TMP/reply${MCOOKIE})"
|
|
rm -f $TMP/reply${MCOOKIE} $TMP/tmpmsg${MCOOKIE}
|
|
if [ "$REPLY" = "Quit" ]; then
|
|
exit 99 # EXIT STATUS 99 = ABORT!
|
|
elif [ "$REPLY" = "No" ]; then
|
|
continue # skip the package
|
|
fi
|
|
fi
|
|
|
|
# Make sure there are no symbolic links sitting in the way of
|
|
# incoming package files:
|
|
grep -v "/$" $TMP/tmplist${MCOOKIE} | while read file ; do
|
|
if [ -L "$ROOT/$file" ]; then
|
|
rm -f "$ROOT/$file"
|
|
fi
|
|
done
|
|
rm -f $TMP/tmplist${MCOOKIE}
|
|
|
|
# Write the package file database entry and install the package:
|
|
echo "PACKAGE NAME: $shortname" > $ADM_DIR/packages/$shortname
|
|
echo "COMPRESSED PACKAGE SIZE: $COMPRESSED" >> $ADM_DIR/packages/$shortname
|
|
echo "UNCOMPRESSED PACKAGE SIZE: $UNCOMPRESSED" >> $ADM_DIR/packages/$shortname
|
|
echo "PACKAGE LOCATION: $package" >> $ADM_DIR/packages/$shortname
|
|
# Record the md5sum if that's a selected option:
|
|
if [ $MD5SUM = 1 ]; then
|
|
echo "PACKAGE MD5SUM: $(md5sum $package | cut -f 1 -d ' ')" >> $ADM_DIR/packages/$shortname
|
|
fi
|
|
echo "PACKAGE DESCRIPTION:" >> $ADM_DIR/packages/$shortname
|
|
grep "^$packagebase:" $DESCRIPTION >> $ADM_DIR/packages/$shortname 2> /dev/null
|
|
if [ "$shortname" != "$packagebase" ]; then
|
|
grep "^$shortname:" $DESCRIPTION >> $ADM_DIR/packages/$shortname 2> /dev/null
|
|
fi
|
|
echo "FILE LIST:" >> $ADM_DIR/packages/$shortname
|
|
if [ "$INSTDIR" = "install" ]; then
|
|
( cd $ROOT/ ; $packagecompression -dc | tar --acls --xattrs --xattrs-include='*' --keep-directory-symlink $NO_OVERWRITE -xpvf - | LC_ALL=C sort ) < $package >> $TMP/$shortname 2> /dev/null
|
|
else
|
|
( cd $ROOT/ ; $packagecompression -dc | tar --transform "s,^install$,$INSTDIR," --transform "s,^install/,$INSTDIR/," --acls --xattrs --xattrs-include='*' --keep-directory-symlink $NO_OVERWRITE -xpvf - | LC_ALL=C sort ) < $package >> $TMP/$shortname 2> /dev/null
|
|
fi
|
|
if [ "$( grep '^\./' $TMP/$shortname | wc -l | tr -d ' ')" = "1" ]; then
|
|
# Good. We have a package that meets the Slackware spec.
|
|
cat $TMP/$shortname >> $ADM_DIR/packages/$shortname
|
|
else
|
|
# Some dumb bunny built a package with something other than makepkg. Bad!
|
|
# Oh well. Bound to happen. Par for the course. Fix it and move on...
|
|
# We'll assume it's just a recent tar with an unfiltered filelist with all
|
|
# files prefixed with "./". No guarantees, but this will usually work.
|
|
cat $TMP/$shortname | sed '2,$s,^\./,,' >> $ADM_DIR/packages/$shortname
|
|
fi
|
|
rm -f $TMP/$shortname
|
|
|
|
# It's a good idea to make sure those newly installed libraries are properly
|
|
# activated for use, unless ROOT is pointing somewhere else in which case
|
|
# running ldconfig on the host system won't make any difference:
|
|
if [ "$ROOT" = "" ] && [ -x /sbin/ldconfig ]; then
|
|
( flock 9 || exit 11
|
|
/sbin/ldconfig 2> /dev/null
|
|
) 9> $INSTLOCKDIR/ldconfig.lock
|
|
fi
|
|
|
|
if [ -f $ROOT/$INSTDIR/doinst.sh ]; then
|
|
if [ "$MODE" = "install" ]; then
|
|
echo "Executing install script for $(basename $package)."
|
|
fi
|
|
# Don't use locking if the script contains "NOLOCK":
|
|
if grep -q NOLOCK $ROOT/$INSTDIR/doinst.sh ; then
|
|
# If bash is available, use sed to convert the install script to use pushd/popd
|
|
# rather than spawning subshells which is slow on ARM. This will also speed up
|
|
# install script processing on any platform.
|
|
if [ -x /bin/bash ]; then
|
|
( cd $ROOT/ ; sed -e's?^( cd \([^;]*\);\(.*\) )$?pushd \1 \&\> /dev/null ; \2 ; popd \&\> /dev/null?g ' $INSTDIR/doinst.sh | /bin/bash )
|
|
else
|
|
( cd $ROOT/ ; sh $INSTDIR/doinst.sh )
|
|
fi
|
|
else # use locking
|
|
# If bash is available, use sed to convert the install script to use pushd/popd
|
|
# rather than spawning subshells which is slow on ARM. This will also speed up
|
|
# install script processing on any platform.
|
|
if [ -x /bin/bash ]; then
|
|
( flock 9 || exit 11
|
|
cd $ROOT/ ; sed -e's?^( cd \([^;]*\);\(.*\) )$?pushd \1 \&\> /dev/null ; \2 ; popd \&\> /dev/null?g ' $INSTDIR/doinst.sh | /bin/bash
|
|
) 9> $INSTLOCKDIR/doinst.sh.lock
|
|
else
|
|
( flock 9 || exit 11
|
|
cd $ROOT/ ; sh $INSTDIR/doinst.sh
|
|
) 9> $INSTLOCKDIR/doinst.sh.lock
|
|
fi
|
|
fi
|
|
fi
|
|
# Clean up the mess...
|
|
if [ -d $ROOT/$INSTDIR ]; then
|
|
if [ -r $ROOT/$INSTDIR/doinst.sh ]; then
|
|
cp $ROOT/$INSTDIR/doinst.sh $ADM_DIR/scripts/$shortname
|
|
chmod 755 $ADM_DIR/scripts/$shortname
|
|
fi
|
|
if [ -r $ROOT/$INSTDIR/douninst.sh ]; then
|
|
cp $ROOT/$INSTDIR/douninst.sh $ADM_DIR/douninst.sh/$shortname
|
|
chmod 755 $ADM_DIR/douninst.sh/$shortname
|
|
echo "$(echo $ADM_DIR | rev | cut -f 1-3 -d / | rev)/douninst.sh/$shortname" >> $ADM_DIR/packages/$shortname
|
|
fi
|
|
# /install/do*inst.sh and /install/slack-* are reserved locations for the package system.
|
|
# Heh, not any more with a recent tar :-)
|
|
( cd $ROOT/$INSTDIR ; rm -f do*inst.sh slack-* 1> /dev/null 2>&1 )
|
|
rmdir $ROOT/$INSTDIR 1> /dev/null 2>&1
|
|
fi
|
|
# If we used a scan directory, get rid of it:
|
|
if [ -d "$TMP/scan${MCOOKIE}" ]; then
|
|
rm -rf "$TMP/scan${MCOOKIE}"
|
|
fi
|
|
rm -f $TMP/tmpmsg${MCOOKIE} $TMP/reply${MCOOKIE}
|
|
if [ "$MODE" = "install" ]; then
|
|
echo "Package $(basename $package) installed."
|
|
fi
|
|
done
|
|
|
|
exit $EXITSTATUS
|