mirror of
git://slackware.nl/current.git
synced 2024-12-28 09:59:53 +01:00
07ac5d43e5
a/e2fsprogs-1.46.2-x86_64-1.txz: Upgraded. a/etc-15.0-x86_64-14.txz: Rebuilt. /etc/hosts: added IPv6 loopback addresses. a/hwdata-0.345-noarch-1.txz: Upgraded. ap/hplip-3.20.6-x86_64-7.txz: Rebuilt. Fixed desktop file to show category and icon properly. Thanks to upnort and ArTourter. d/git-2.30.1-x86_64-3.txz: Rebuilt. Make sure the bash-completion file is installed in the proper location. Thanks to Robby Workman. d/python-setuptools-54.0.0-x86_64-1.txz: Upgraded. d/vala-0.50.4-x86_64-1.txz: Upgraded. l/imagemagick-7.0.11_2-x86_64-1.txz: Upgraded. l/python-pillow-8.1.1-x86_64-1.txz: Upgraded. n/network-scripts-15.0-noarch-13.txz: Rebuilt. Well, apparently there was a newer branch of this than the one that was sitting in my usual pending queue, so here it is. This also includes some additional documentation on the new features. NOTE: In order to use SLAAC to configure IPv6, you'll need to have USE_SLAAC[x]="yes" for the interface in rc.inet1.conf. This is to ensure that nobody is surprised to find their machine fully exposed to the internet - better safe than sorry. Thanks to Darren "Tadgy" Austin and Robby Workman. n/wireless_tools-30.pre9-x86_64-4.txz: Rebuilt. This package contains some updates to rc.wireless and rc.wireless.conf. Thanks to Darren "Tadgy" Austin. xfce/mousepad-0.5.3-x86_64-1.txz: Upgraded.
226 lines
7.1 KiB
Bash
Executable file
226 lines
7.1 KiB
Bash
Executable file
#!/bin/bash
|
|
|
|
# Copyright 2008, 2009, 2010, 2015, 2016, 2018, 2020, 2021 Patrick J. Volkerding, Sebeka, MN, USA
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use of this script, with or without modification, is
|
|
# permitted provided that the following conditions are met:
|
|
#
|
|
# 1. Redistributions of this script must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
|
|
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
|
|
|
|
cd $(dirname $0) ; CWD=$(pwd)
|
|
|
|
PKGNAM=e2fsprogs
|
|
VERSION=${VERSION:-$(echo e2fsprogs*.tar.?z | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
|
|
BUILD=${BUILD:-1}
|
|
|
|
NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
|
|
|
|
# Automatically determine the architecture we're building on:
|
|
MARCH=$( uname -m )
|
|
if [ -z "$ARCH" ]; then
|
|
case "$MARCH" in
|
|
i?86) export ARCH=i586 ;;
|
|
armv7hl) export ARCH=$MARCH ;;
|
|
arm*) export ARCH=arm ;;
|
|
# Unless $ARCH is already set, use uname -m for all other archs:
|
|
*) export ARCH=$MARCH ;;
|
|
esac
|
|
fi
|
|
|
|
# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
|
|
# the name of the created package would be, and then exit. This information
|
|
# could be useful to other scripts.
|
|
if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
|
|
echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
|
|
exit 0
|
|
fi
|
|
|
|
if [ "$ARCH" = "i586" ]; then
|
|
SLKCFLAGS="-O2 -march=i586 -mtune=i686"
|
|
LIBDIRSUFFIX=""
|
|
elif [ "$ARCH" = "s390" ]; then
|
|
SLKCFLAGS="-O2"
|
|
LIBDIRSUFFIX=""
|
|
elif [ "$ARCH" = "x86_64" ]; then
|
|
SLKCFLAGS="-O2 -fPIC"
|
|
LIBDIRSUFFIX="64"
|
|
elif [ "$ARCH" = "armv7hl" ]; then
|
|
SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
|
|
LIBDIRSUFFIX=""
|
|
else
|
|
SLKCFLAGS="-O2"
|
|
LIBDIRSUFFIX=""
|
|
fi
|
|
|
|
case "$ARCH" in
|
|
arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
|
|
*) TARGET=$ARCH-slackware-linux ;;
|
|
esac
|
|
|
|
TMP=${TMP:-/tmp}
|
|
PKG=$TMP/package-e2fsprogs
|
|
|
|
rm -rf $PKG
|
|
mkdir -p $TMP $PKG
|
|
cd $TMP
|
|
rm -rf e2fsprogs-$VERSION
|
|
tar xvf $CWD/e2fsprogs-$VERSION.tar.?z || exit 1
|
|
cd e2fsprogs-$VERSION || exit 1
|
|
chown -R root:root .
|
|
find . \
|
|
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
|
|
-exec chmod 755 {} \+ -o \
|
|
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
|
|
-exec chmod 644 {} \+
|
|
|
|
# Do not use 64-bit by default on ext4, since some bootloaders cannot handle
|
|
# it yet. But use "auto_64-bit_support = 1", which will enable 64-bit if the
|
|
# number of blocks for the file system requires the feature to be enabled.
|
|
zcat $CWD/e2fsprogs.no.64bit.by.default.diff.gz | patch -p1 --verbose || exit 1
|
|
|
|
# Disable libblkid and libuuid, as we'll be using the ones in u-l-ng
|
|
CFLAGS="$SLKCFLAGS" \
|
|
./configure \
|
|
--prefix= \
|
|
--libdir=/lib${LIBDIRSUFFIX} \
|
|
--bindir=/usr/bin \
|
|
--includedir=/usr/include \
|
|
--datadir=/usr/share \
|
|
--datarootdir=/usr/share \
|
|
--mandir=/usr/man \
|
|
--infodir=/usr/info \
|
|
--docdir=/usr/doc/e2fsprogs-$VERSION \
|
|
--enable-elf-shlibs \
|
|
--disable-libblkid \
|
|
--disable-libuuid \
|
|
--disable-uuidd \
|
|
--build=$TARGET || exit 1
|
|
|
|
make $NUMJOBS || make || exit 1
|
|
make install DESTDIR=$PKG || exit 1
|
|
make install-libs DESTDIR=$PKG || exit 1
|
|
|
|
# I guess Ted would rather not have this included, so we won't.
|
|
# ( cd misc
|
|
# make findsuper
|
|
# cat findsuper > $PKG/sbin/findsuper
|
|
# chmod 0755 $PKG/sbin/findsuper )
|
|
|
|
# Don't clobber an existing config file
|
|
mv $PKG/etc/mke2fs.conf $PKG/etc/mke2fs.conf.new
|
|
|
|
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
|
|
| cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
|
|
|
|
# Fix up package:
|
|
mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
|
|
mv $PKG/lib${LIBDIRSUFFIX}/pkgconfig $PKG/lib${LIBDIRSUFFIX}/*.so \
|
|
$PKG/usr/lib${LIBDIRSUFFIX}
|
|
( cd $PKG/usr/lib${LIBDIRSUFFIX}
|
|
for i in *.so ; do
|
|
ln -sf /lib${LIBDIRSUFFIX}/$(readlink $i) $i ;
|
|
done
|
|
)
|
|
|
|
# Since fsck is now part of util-linux, let's prefer that version:
|
|
if [ -r $PKG/sbin/fsck ]; then
|
|
mv $PKG/sbin/fsck $PKG/sbin/fsck-e2fsprogs
|
|
fi
|
|
if [ -r $PKG/usr/man/man8/fsck.8 ]; then
|
|
mv $PKG/usr/man/man8/fsck.8 $PKG/usr/man/man8/fsck-e2fsprogs.8
|
|
fi
|
|
|
|
# Get rid of systemd cron.d cruft:
|
|
rm -rf $PKG/etc/cron.d
|
|
|
|
# findfs is intentionally left out here - we use the one in util-linux-ng
|
|
( cd $PKG/sbin
|
|
rm -f \
|
|
mkfs.ext2 mkfs.ext3 mkfs.ext4 mkfs.ext4dev \
|
|
fsck.ext2 fsck.ext3 fsck.ext4dev e2label findfs
|
|
ln -sf mke2fs mkfs.ext2
|
|
ln -sf mke2fs mkfs.ext3
|
|
ln -sf mke2fs mkfs.ext4
|
|
ln -sf mke2fs mkfs.ext4dev
|
|
ln -sf tune2fs e2label
|
|
cat << EOF > fsck.ext2
|
|
#!/bin/bash
|
|
exec /sbin/e2fsck -C 0 \$*
|
|
EOF
|
|
chmod 0755 fsck.ext2
|
|
# Why won't symlinks work here? --RW
|
|
# Because $0 will always be "fsck.ext2" in that case. --PJV
|
|
# rworkman is correct, so ignore the previous two comments :) --PJV
|
|
cp -a fsck.ext2 fsck.ext3
|
|
cp -a fsck.ext2 fsck.ext4
|
|
cp -a fsck.ext2 fsck.ext4dev
|
|
)
|
|
( cd $PKG/usr/man/man5
|
|
ln -sf ext4.5 ext2.5
|
|
ln -sf ext4.5 ext3.5
|
|
)
|
|
( cd $PKG/usr/man/man8
|
|
rm -f fsck.ext2.8 fsck.ext3.8 mkfs.ext2.8 mkfs.ext3.8 \
|
|
mkfs.ext4.8 mkfs.ext4dev.8
|
|
ln -sf e2fsck.8 fsck.ext2.8
|
|
ln -sf e2fsck.8 fsck.ext3.8
|
|
ln -sf e2fsck.8 fsck.ext4.8
|
|
ln -sf e2fsck.8 fsck.ext4dev.8
|
|
ln -sf mke2fs.8 mkfs.ext2.8
|
|
ln -sf mke2fs.8 mkfs.ext3.8
|
|
ln -sf mke2fs.8 mkfs.ext4.8
|
|
ln -sf mke2fs.8 mkfs.ext4dev.8
|
|
)
|
|
|
|
# Compress manual pages:
|
|
find $PKG/usr/man -type f -exec gzip -9 {} \+
|
|
for i in $( find $PKG/usr/man -type l ) ; do
|
|
ln -s $( readlink $i ).gz $i.gz
|
|
rm $i
|
|
done
|
|
|
|
mkdir -p $PKG/usr/doc/e2fsprogs-$VERSION
|
|
cp -a \
|
|
COPYING* INSTALL* NOTICE README* RELEASE-NOTES SHLIBS SUBMITTING-PATCHES \
|
|
$PKG/usr/doc/e2fsprogs-$VERSION
|
|
cp -a ext2ed/COPYRIGHT $PKG/usr/doc/e2fsprogs-$VERSION/COPYRIGHT.ext2ed
|
|
cp -a ext2ed/README $PKG/usr/doc/e2fsprogs-$VERSION/README.ext2ed
|
|
cp -a lib/uuid/COPYING $PKG/usr/doc/e2fsprogs-$VERSION/COPYING.uuid
|
|
chmod 644 $PKG/usr/doc/e2fsprogs-$VERSION/*
|
|
|
|
# If RELEASE-NOTES is a symlink, fix that:
|
|
if [ -L $PKG/usr/doc/e2fsprogs-$VERSION/RELEASE-NOTES ]; then
|
|
rm $PKG/usr/doc/e2fsprogs-$VERSION/RELEASE-NOTES
|
|
cp -a $(readlink RELEASE-NOTES) $PKG/usr/doc/e2fsprogs-$VERSION/RELEASE-NOTES
|
|
chmod 644 $PKG/usr/doc/e2fsprogs-$VERSION/RELEASE-NOTES
|
|
fi
|
|
|
|
# Trim RELEASE-NOTES to only include recent history:
|
|
if [ -r RELEASE-NOTES ]; then
|
|
DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
|
|
cat RELEASE-NOTES | head -n 1000 > $DOCSDIR/RELEASE-NOTES
|
|
touch -r RELEASE-NOTES $DOCSDIR/RELEASE-NOTES
|
|
fi
|
|
|
|
mkdir -p $PKG/install
|
|
cat $CWD/slack-desc > $PKG/install/slack-desc
|
|
zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
|
|
|
|
cd $PKG
|
|
/sbin/makepkg -l y -c n $TMP/e2fsprogs-$VERSION-$ARCH-$BUILD.txz
|
|
|