mirror of
git://slackware.nl/current.git
synced 2025-01-18 22:27:20 +01:00
646a5c1cbf
a/pkgtools-15.0-noarch-13.txz: Rebuilt. installpkg: default line length for --terselength is the number of columns. removepkg: added --terse mode. upgradepkg: default line length for --terselength is the number of columns. upgradepkg: accept -option in addition to --option. ap/vim-8.1.0026-x86_64-1.txz: Upgraded. d/bison-3.0.5-x86_64-1.txz: Upgraded. e/emacs-26.1-x86_64-1.txz: Upgraded. kde/kopete-4.14.3-x86_64-8.txz: Rebuilt. Recompiled against libidn-1.35. n/conntrack-tools-1.4.5-x86_64-1.txz: Upgraded. n/libnetfilter_conntrack-1.0.7-x86_64-1.txz: Upgraded. n/libnftnl-1.1.0-x86_64-1.txz: Upgraded. n/links-2.16-x86_64-2.txz: Rebuilt. Rebuilt to enable X driver for -g mode. n/lynx-2.8.9dev.19-x86_64-1.txz: Upgraded. n/nftables-0.8.5-x86_64-1.txz: Upgraded. n/p11-kit-0.23.11-x86_64-1.txz: Upgraded. n/ulogd-2.0.7-x86_64-1.txz: Upgraded. n/whois-5.3.1-x86_64-1.txz: Upgraded. xap/network-manager-applet-1.8.12-x86_64-1.txz: Upgraded. xap/vim-gvim-8.1.0026-x86_64-1.txz: Upgraded.
141 lines
5.7 KiB
Text
141 lines
5.7 KiB
Text
# /etc/rc.d/rc.inet1.conf
|
|
#
|
|
# This file contains the configuration settings for network interfaces.
|
|
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
|
|
# If you don't have an interface, leave the settings null ("").
|
|
|
|
# You can configure network interfaces other than eth0,eth1... by setting
|
|
# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
|
|
# or empty, it is assumed you're configuring eth<interface>.
|
|
|
|
# Several other parameters are available, the end of this file contains a
|
|
# comprehensive set of examples.
|
|
|
|
# =============================================================================
|
|
|
|
# Config information for eth0:
|
|
IPADDR[0]=""
|
|
NETMASK[0]=""
|
|
IPALIASES[0]=""
|
|
USE_DHCP[0]=""
|
|
DHCP_HOSTNAME[0]=""
|
|
|
|
# Config information for eth1:
|
|
IPADDR[1]=""
|
|
NETMASK[1]=""
|
|
IPALIASES[1]=""
|
|
USE_DHCP[1]=""
|
|
DHCP_HOSTNAME[1]=""
|
|
|
|
# Config information for eth2:
|
|
IPADDR[2]=""
|
|
NETMASK[2]=""
|
|
IPALIASES[2]=""
|
|
USE_DHCP[2]=""
|
|
DHCP_HOSTNAME[2]=""
|
|
|
|
# Config information for eth3:
|
|
IPADDR[3]=""
|
|
NETMASK[3]=""
|
|
IPALIASES[3]=""
|
|
USE_DHCP[3]=""
|
|
DHCP_HOSTNAME[3]=""
|
|
|
|
# Default gateway IP address:
|
|
GATEWAY=""
|
|
|
|
# Change this to "yes" for debugging output to stdout. Unfortunately,
|
|
# /sbin/hotplug seems to disable stdout so you'll only see debugging output
|
|
# when rc.inet1 is called directly.
|
|
DEBUG_ETH_UP="no"
|
|
|
|
# Example of how to configure a bridge:
|
|
# Note the added "BRNICS" variable which contains a space-separated list
|
|
# of the physical or virtual network interfaces you want to add to the bridge.
|
|
#IFNAME[0]="br0"
|
|
#BRNICS[0]="eth0"
|
|
#IPADDR[0]="192.168.0.1"
|
|
#NETMASK[0]="255.255.255.0"
|
|
#IPALIASES[0]=""
|
|
#USE_DHCP[0]=""
|
|
#DHCP_HOSTNAME[0]=""
|
|
|
|
# Virtual interfaces to create - these are created before any address
|
|
# configuration or bridge setup is done, so you may use these interfaces
|
|
# as IFNAME or BRNICS values. These can be tun or tap interfaces:
|
|
# adjust VIRTIFNAME and VIRTIFTYPE accordingly.
|
|
# Starting with VIRTIFNAME[0] is mandatory, and each next one must be
|
|
# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on.
|
|
#
|
|
# Virtual tap interface example
|
|
#VIRTIFNAME[0]="tap0"
|
|
#VIRTIFTYPE[0]="tap"
|
|
#VIRTIFUSER[0]="root"
|
|
#VIRTIFGROUP[0]="root"
|
|
#
|
|
# Virtual tun interface example
|
|
#VIRTIFNAME[1]="tun0"
|
|
#VIRTIFTYPE[1]="tun"
|
|
#VIRTIFUSER[1]="someuser"
|
|
#VIRTIFGROUP[1]="somegroup"
|
|
|
|
## Example config information for wlan0. Uncomment the lines you need and fill
|
|
## in your data. (You may not need all of these for your wireless network)
|
|
#IFNAME[4]="wlan0"
|
|
#IPADDR[4]=""
|
|
#NETMASK[4]=""
|
|
#USE_DHCP[4]="yes"
|
|
#DHCP_HOSTNAME[4]="icculus-wireless"
|
|
#DHCP_KEEPRESOLV[4]="yes"
|
|
#DHCP_KEEPNTP[4]="yes"
|
|
#DHCP_KEEPGW[4]="yes"
|
|
#DHCP_IPADDR[4]=""
|
|
#WLAN_ESSID[4]=DARKSTAR
|
|
#WLAN_MODE[4]=Managed
|
|
#WLAN_RATE[4]="54M auto"
|
|
#WLAN_CHANNEL[4]="auto"
|
|
#WLAN_KEY[4]="D5A31F54ACF0487C2D0B1C10D2"
|
|
#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
|
|
#WLAN_WPA[4]="wpa_supplicant"
|
|
#WLAN_WPADRIVER[4]="wext"
|
|
#WLAN_WPAWAIT[4]=30
|
|
|
|
## Some examples of additional network parameters that you can use.
|
|
## Config information for wlan0:
|
|
#IFNAME[4]="wlan0" # Use a different interface name instead of
|
|
# the default 'eth4'
|
|
#IFNAME[4]="eth0:1" # Set up an IP alias.
|
|
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
|
|
#MTU[4]="" # The default MTU is 1500, but you might need
|
|
# 1360 when you use NAT'ed IPSec traffic.
|
|
#DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to
|
|
# wait for server resonse is 15 seconds, but
|
|
# you might want a shorter or longer wait.
|
|
#DHCP_KEEPRESOLV[4]="yes" # If you don't want /etc/resolv.conf overwritten
|
|
#DHCP_KEEPNTP[4]="yes" # If you don't want ntp.conf overwritten
|
|
#DHCP_KEEPGW[4]="yes" # If you don't want the DHCP server to change
|
|
# your default gateway
|
|
#DHCP_IPADDR[4]="" # Request a specific IP address from the DHCP
|
|
# server
|
|
#DHCP_DEBUG[4]="yes" # Make dhcpcd show verbose diagnostics
|
|
#DHCP_NOIPV4LL[4]="yes" # Do not assign an ipv4ll address when a DHCP
|
|
# server is not found (ipv4ll link-local
|
|
# adresses in the IP range 169.254.0.0/16 are
|
|
# also known as "zeroconf" addresses)
|
|
#WLAN_ESSID[4]=DARKSTAR # An example of how you can override _any_
|
|
# parameter defined in rc.wireless.conf, by
|
|
# prepending 'WLAN_' to the parameter's name.
|
|
# Useful with multiple wireless interfaces.
|
|
#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
|
|
# Some drivers require a private ioctl to be
|
|
# set through the iwpriv command. If more than
|
|
# one is required, you can place them in the
|
|
# IWPRIV parameter (separated with the pipe (|)
|
|
# character, see the example).
|
|
#WLAN_WPA[4]="wpa_supplicant" # Run wpa_supplicant for WPA support
|
|
#WLAN_WPADRIVER[4]="ndiswrapper"# Tell wpa_supplicant to specifically use the
|
|
# ndiswrapper driver (if you leave this empty
|
|
# the 'wext' driver is used by default)
|
|
#WLAN_WPAWAIT[4]=30 # In case it takes long for the WPA association
|
|
# to finish, you can increase the wait time
|
|
# (defaults to 10 seconds)
|