mirror of
git://slackware.nl/current.git
synced 2025-01-06 05:25:20 +01:00
5a12e7c134
Wed Aug 26 10:00:38 CDT 2009 Slackware 13.0 x86_64 is released as stable! Thanks to everyone who helped make this release possible -- see the RELEASE_NOTES for the credits. The ISOs are off to the replicator. This time it will be a 6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD. We're taking pre-orders now at store.slackware.com. Please consider picking up a copy to help support the project. Once again, thanks to the entire Slackware community for all the help testing and fixing things and offering suggestions during this development cycle. As always, have fun and enjoy! -P.
225 lines
7.1 KiB
Text
225 lines
7.1 KiB
Text
# Wireless LAN adapter configuration
|
|
#
|
|
# Theory of operation :
|
|
#
|
|
# The script attempts to match a block of settings to the specific wireless
|
|
# card inserted, the *first* block matching the card is used.
|
|
# The address format is "hwaddr", with * as a wildcard.
|
|
# 'hwaddr' is the unique MAC address identifier of the wireless card.
|
|
# The MAC address is usually printed on the card, or can be found via ifconfig.
|
|
# Some examples here use only half of the MAC address with a wildcard to
|
|
# match a whole family of cards...
|
|
#
|
|
# All the Wireless specific configuration is done through the Wireless
|
|
# Extensions, so we will just call 'iwconfig' with the right parameters
|
|
# defined below.
|
|
# Of course, you need to have iwconfig installled on your system.
|
|
# To download iwconfig, or for more info on Wireless Extensions :
|
|
# http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
|
|
#
|
|
# Note : you don't need to fill all parameters, leave them blank, in most
|
|
# cases the driver will initialise itself with sane defaults values or
|
|
# automatically figure out the value... And no drivers do support all
|
|
# possible settings...
|
|
#
|
|
# -- This is a modified '/etc/pcmcia/wireless.opts' script --
|
|
# -- I added sections for Prism/GT and Atheros based cards --
|
|
# -- (supported by the prism54 and madwifi drivers) --
|
|
# -- 16/sep/2004 * Eric Hameleers --
|
|
#
|
|
|
|
VERBOSE=1
|
|
|
|
case "$HWADDR" in
|
|
|
|
## NOTE : Comment out the following five lines to activate the samples below ...
|
|
## --------- START SECTION TO REMOVE -----------
|
|
## Pick up any Access Point, should work on most 802.11 cards
|
|
*)
|
|
INFO="Any ESSID"
|
|
ESSID="any"
|
|
;;
|
|
## ---------- END SECTION TO REMOVE ------------
|
|
|
|
|
|
# Here are a few examples with a few Wireless LANs supported...
|
|
# The matching is done on the first 3 bytes of the MAC address
|
|
|
|
# SMC2835W EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter
|
|
00:04:E2:*)
|
|
INFO="SMC2835W EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter"
|
|
# ESSID (extended network name) : My Network, any
|
|
ESSID="any"
|
|
# NWID/Domain (cell identifier) : 89AB, 100, off
|
|
NWID=""
|
|
# Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
|
|
MODE="Managed"
|
|
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
|
|
FREQ=""
|
|
CHANNEL="7"
|
|
# Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm)
|
|
SENS=""
|
|
# Bit rate : auto, 1M, 11M,54M
|
|
RATE="auto"
|
|
# Encryption key : 4567-89AB-CD, s:password
|
|
# Example for 40-bit encryption:
|
|
#KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
|
|
# Example for 104-bit encryption (aka 128-bit WEP):
|
|
#KEY="d5ad2f05abd048ecf10b1c80c7"
|
|
KEY=""
|
|
# RTS threshold : off, 500
|
|
RTS=""
|
|
# Fragmentation threshold : off, 1000
|
|
FRAG=""
|
|
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
|
|
IWCONFIG=""
|
|
# iwspy parameters : + 01:23:45:67:89:AB
|
|
IWSPY=""
|
|
# iwpriv parameters : set_port 2, set_histo 50 60
|
|
IWPRIV=""
|
|
;;
|
|
|
|
# Multiband Atheros based 802.11a/b/g universal NIC cards
|
|
00:05:4E:*)
|
|
INFO="Multiband Atheros based 802.11a/b/g universal NIC"
|
|
# ESSID (extended network name) : My Network, any
|
|
ESSID=""
|
|
# Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
|
|
MODE="Managed"
|
|
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
|
|
FREQ=""
|
|
CHANNEL="7"
|
|
# Bit rate : auto, 1M, 11M,54M
|
|
RATE="auto"
|
|
# Encryption key : 4567-89AB-CD, s:password
|
|
# Example for 40-bit encryption:
|
|
#KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
|
|
# Example for 104-bit encryption (aka 128-bit WEP):
|
|
#KEY="d5ad2f05abd048ecf10b1c80c7"
|
|
KEY=""
|
|
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
|
|
IWCONFIG=""
|
|
# iwspy parameters : + 01:23:45:67:89:AB
|
|
IWSPY=""
|
|
# iwpriv parameters : set_port 2, set_histo 50 60
|
|
IWPRIV=""
|
|
;;
|
|
|
|
# Lucent Wavelan IEEE (+ Orinoco, RoamAbout and ELSA)
|
|
# Note : wvlan_cs driver only, and version 1.0.4+ for encryption support
|
|
00:60:1D:*|00:02:2D:*)
|
|
INFO="Wavelan IEEE example (Lucent default settings)"
|
|
ESSID="Wavelan Network"
|
|
MODE="Managed"
|
|
#RATE="auto"
|
|
KEY="s:secu1"
|
|
# To set all four keys, use :
|
|
#KEY="s:secu1 [1] key s:secu2 [2] key s:secu3 [3] key s:secu4 [4] key [1]"
|
|
# For the RG 1000 Residential Gateway: The ESSID is the identifier on
|
|
# the unit, and the default key is the last 5 digits of the same.
|
|
#ESSID="084d70"
|
|
#KEY="s:84d70"
|
|
;;
|
|
|
|
# Cisco/Aironet 4800/3x0
|
|
# Note : MPL driver only (airo/airo_cs), version 1.3 or later
|
|
00:40:96:*|00:02:8A:*)
|
|
INFO="Cisco/Aironet example (Cisco default settings)"
|
|
ESSID="any"
|
|
# To set all four ESSID, use iwconfig v21 and the same trick as above
|
|
MODE="Managed"
|
|
#RATE="11M auto"
|
|
#KEY="d5ad2f05abd048ecf10b1c80c7"
|
|
KEY="off"
|
|
;;
|
|
|
|
# Samsung MagicLan (+ some other PrismII cards)
|
|
# Note : Samsung binary library driver, version 1.20 or later
|
|
00:00:F0:*|00:02:78:*)
|
|
INFO="Samsung MagicLan example (Samsung default settings)"
|
|
ESSID="any"
|
|
MODE="Managed"
|
|
CHANNEL="4"
|
|
RATE="auto"
|
|
#KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]"
|
|
#IWCONFIG="power on"
|
|
;;
|
|
|
|
# Raytheon Raylink/WebGear Aviator2.4
|
|
# Note : doesn't work yet, please use for debugging only :-(
|
|
00:00:8F:*|00:00:F1:*)
|
|
INFO="Raylink/Aviator2.4 example (Aviator default ad-hoc setting)"
|
|
ESSID="ADHOC_ESSID"
|
|
MODE="Ad-Hoc"
|
|
RATE="auto"
|
|
IWPRIV="set_framing 1"
|
|
;;
|
|
|
|
# Old Lucent Wavelan
|
|
08:00:0E:*)
|
|
INFO="Wavelan example (Lucent default settings)"
|
|
NWID="0100"
|
|
MODE="Ad-Hoc"
|
|
FREQ="2.425G"
|
|
KEY="off"
|
|
;;
|
|
|
|
# Netwave (Xircom Netwave/Netwave Airsurfer)
|
|
00:80:C7:*)
|
|
INFO="Netwave example (Netwave default settings)"
|
|
NWID="100"
|
|
KEY="00"
|
|
;;
|
|
|
|
# Proxim RangeLan2/Symphony (what is the MAC address ???)
|
|
XX:XX:XX:*)
|
|
INFO="Proxim RangeLan2/Symphony example"
|
|
NWID="0"
|
|
MODE="Master"
|
|
CHANNEL="15"
|
|
IWPRIV="setsubchan 1"
|
|
;;
|
|
|
|
# No Wires Needed Swallow 550 and 1100 setting (what is the MAC address ???)
|
|
XX:XX:XX:*)
|
|
INFO="NWN Swallow example"
|
|
ESSID="session"
|
|
KEY="0000-0000-00 open"
|
|
;;
|
|
|
|
# Symbol Spectrum24 setting (what is the MAC address ???)
|
|
XX:XX:XX:*)
|
|
INFO="Symbol Spectrum24 example"
|
|
ESSID="Essid string"
|
|
;;
|
|
|
|
# Generic example (decribe all possible settings)
|
|
*)
|
|
INFO="Fill with your own settings..."
|
|
# ESSID (extended network name) : My Network, any
|
|
ESSID=""
|
|
# NWID/Domain (cell identifier) : 89AB, 100, off
|
|
NWID=""
|
|
# Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto
|
|
MODE=""
|
|
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
|
|
FREQ=""
|
|
CHANNEL=""
|
|
# Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm)
|
|
SENS=""
|
|
# Bit rate : auto, 1M, 11M
|
|
RATE=""
|
|
# Encryption key : 4567-89AB-CD, s:password
|
|
KEY=""
|
|
# RTS threshold : off, 500
|
|
RTS=""
|
|
# Fragmentation threshold : off, 1000
|
|
FRAG=""
|
|
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB
|
|
IWCONFIG=""
|
|
# iwspy parameters : + 01:23:45:67:89:AB
|
|
IWSPY=""
|
|
# iwpriv parameters : set_port 2, set_histo 50 60
|
|
IWPRIV=""
|
|
;;
|
|
esac
|