mirror of
git://slackware.nl/current.git
synced 2024-12-27 09:59:16 +01:00
07ac5d43e5
a/e2fsprogs-1.46.2-x86_64-1.txz: Upgraded. a/etc-15.0-x86_64-14.txz: Rebuilt. /etc/hosts: added IPv6 loopback addresses. a/hwdata-0.345-noarch-1.txz: Upgraded. ap/hplip-3.20.6-x86_64-7.txz: Rebuilt. Fixed desktop file to show category and icon properly. Thanks to upnort and ArTourter. d/git-2.30.1-x86_64-3.txz: Rebuilt. Make sure the bash-completion file is installed in the proper location. Thanks to Robby Workman. d/python-setuptools-54.0.0-x86_64-1.txz: Upgraded. d/vala-0.50.4-x86_64-1.txz: Upgraded. l/imagemagick-7.0.11_2-x86_64-1.txz: Upgraded. l/python-pillow-8.1.1-x86_64-1.txz: Upgraded. n/network-scripts-15.0-noarch-13.txz: Rebuilt. Well, apparently there was a newer branch of this than the one that was sitting in my usual pending queue, so here it is. This also includes some additional documentation on the new features. NOTE: In order to use SLAAC to configure IPv6, you'll need to have USE_SLAAC[x]="yes" for the interface in rc.inet1.conf. This is to ensure that nobody is surprised to find their machine fully exposed to the internet - better safe than sorry. Thanks to Darren "Tadgy" Austin and Robby Workman. n/wireless_tools-30.pre9-x86_64-4.txz: Rebuilt. This package contains some updates to rc.wireless and rc.wireless.conf. Thanks to Darren "Tadgy" Austin. xfce/mousepad-0.5.3-x86_64-1.txz: Upgraded.
529 lines
15 KiB
Text
529 lines
15 KiB
Text
This file documents the instructions for upgrading to Slackware -current, the
|
|
packages added, removed, renamed, and/or split during the development cycle
|
|
from Slackware 14.2 through -current, and some potential "gotchas" that users
|
|
can avoid by arming themselves with a little knowledge.
|
|
|
|
|
|
*** INSTRUCTIONS FOR UPGRADING FROM 14.2 ***
|
|
|
|
Follow the instructions detailed in the UPGRADE.TXT located in this
|
|
directory.
|
|
|
|
Note that upgrading from a Slackware version earlier than 14.2 is NOT
|
|
supported at all and will most likely not work.
|
|
|
|
|
|
*** NEW USERS/GROUPS SINCE 14.2 ***
|
|
|
|
cgred group, GID 41
|
|
dovecot user and group, UID and GID 94
|
|
dovenull user and group, UID and GID 95
|
|
icecc user and group, UID and GID 49
|
|
ldap user and group, UID and GID 330
|
|
ntp user and group, UID and GID 44
|
|
postfix user and group, UID and GID 91
|
|
postdrop user and group, UID and GID 92
|
|
|
|
|
|
*** NOTABLE CHANGES AND HINTS ***
|
|
|
|
User authentication is PAM-based now; in short, Slackware ships PAM.
|
|
The out-of-the-box configuration should be exactly what you expect
|
|
from Slackware. Enjoy.
|
|
|
|
The stock networking scripts now use iproute2 instead of net-tools and
|
|
bridge-utils and friends. All of the previous functionality is still
|
|
supported with the same config file syntax in /etc/rc.d/rc.inet1.conf,
|
|
but added functionality includes:
|
|
- support for creating virtual interfaces (e.g. tun/tap) and adding
|
|
them to bridges as well as binding additional IP addresses to
|
|
virtual and/or real interfaces
|
|
- VLAN (802.1Q) support
|
|
- Link Aggregation (bonding) support
|
|
- IPv6 support
|
|
The added functionality required some additional options and changes
|
|
to the format of rc.inet1.conf, but for basic configurations, you can
|
|
still use /sbin/ifconfig to view and/or configure interfaces manually.
|
|
For IPv6 support, note that SLAAC is now disabled by default (the
|
|
rationale is that a newly installed machine should not have internet
|
|
connectivity without admin intervention) - see the USE_SLAAC config
|
|
parameter in the new rc.inet1.conf file.
|
|
|
|
The ntp package has changed such that ntpd now drops privileges and runs as
|
|
user ntp and group ntp. Be sure to move/merge the changes to rc.ntpd and
|
|
/etc/ntp.conf.
|
|
|
|
The gnupg2 package has changed such that the gpg agent is autostarted on
|
|
demand now, so be sure to remove any local profile script changes to
|
|
handle that. Also, there is a new keyring format used by gnupg2-2.2.x,
|
|
so have a look at https://www.gnupg.org/faq/whats-new-in-2.1.html#keybox
|
|
for migration tips.
|
|
|
|
n/postfix replaces n/sendmail as the default MTA.
|
|
However, postfix is sendmail compatible with respect to function; in
|
|
other words, any scripts or other applications expecting to *use*
|
|
sendmail should work just fine, as postfix installs a sendmail binary
|
|
at /usr/sbin/sendmail. This is all fine and wonderful unless you want
|
|
to use sendmail *instead* of postfix and thus decided to leave sendmail
|
|
installed on the system. The postfix package will overwrite the
|
|
/usr/sbin/sendmail file on the system. Long story short: if you plan
|
|
to use the sendmail MTA instead of postfix, you will need to reinstall
|
|
sendmail after postfix. Many distros provide a means of having both MTAs
|
|
(and even others, such as exim and courier) installed at the same time,
|
|
but we don't see a reason to bother with that. If for some reason you
|
|
DO want both:
|
|
1: First, install the MTA you do NOT plan to use
|
|
2. Rename the /usr/sbin/sendmail binary with a suffix, e.g.
|
|
# mv /usr/sbin/sendmail /usr/sbin/sendmail.postfix
|
|
3: Next, install the MTA you DO plan to use
|
|
Finally, you might want to configure the first-installed MTA to look at
|
|
the changed path for its sendmail binary. We're not going to cover that
|
|
here. Also note that only one of the installed MTAs will be able to bind
|
|
the common SMTP ports, if you want to have both MTAs running.
|
|
|
|
The cciss driver has been replaced by the hpsa driver, so if you're
|
|
running an HP server, this may be relevant to you. This is mostly an
|
|
issue with respect to device references -- if you have references to
|
|
/dev/cciss/* in e.g. /etc/fstab and/or /etc/smartd.conf, you'll need
|
|
to fix those. Reference: https://tinyurl.com/cciss-hpsa
|
|
|
|
The default location for packaged dbus configs and polkit rules are now
|
|
/usr/share/dbus-1/system.d/ and /usr/share/polkit-1/rules.d/ ; as such,
|
|
all packaged files have been moved to those locations. If you upgraded
|
|
from 14.2, you will have the previous copies of those still inside
|
|
/etc/dbus-1/system.d/ and /etc/polkit-1/rules.d/ (as they used to be
|
|
installed with .new suffixes). The upgrade process will not (and should
|
|
not) automatically remove those, as the locations in /etc are intended
|
|
to override the locations in /usr/share, and it's possible that the
|
|
system administrator had edited the files in /etc and intends for those
|
|
edits to be persistent. If that does not apply, *and* the files remaining
|
|
in there were not installed by non-stock packages, you may remove the
|
|
dbus configs and polkit rules files in the /etc locations.
|
|
|
|
elogind now manages cgroups (cgmanager is removed), so the leftover files
|
|
at /etc/rc.d/rc.cgmanager and /etc/rc.d/rc.cgproxy should be removed.
|
|
|
|
Use one of the provided generic kernels for daily use. Do not report
|
|
bugs until/unless you have reproduced them using one of the stock
|
|
generic kernels. You will need to create an initrd in order to boot
|
|
the generic kernels - see /boot/README.initrd for instructions.
|
|
The huge kernels are primarily intended as "installer" and "emergency"
|
|
kernels in case you forget to make an initrd. For most systems, you
|
|
should use the generic SMP kernel if it will run, even if your system is
|
|
not SMP-capable. Some newer hardware needs the local APIC enabled in the
|
|
SMP kernel, and theoretically there should not be a performance penalty
|
|
with using the SMP-capable kernel on a uniprocessor machine, as the SMP
|
|
kernel tests for this and makes necessary adjustments. Furthermore, the
|
|
kernel sources shipped with Slackware are configured for SMP usage, so you
|
|
won't have to modify those to build external modules (such as NVidia or
|
|
ATI proprietary drivers) if you use the SMP kernel.
|
|
|
|
If you decide to use one of the non-SMP kernels, you will need to follow the
|
|
instructions in /extra/linux-5.10.19-nosmp-sdk/README.TXT to modify your
|
|
kernel sources for non-SMP usage. Note that this only applies if you are
|
|
using the Slackware-provided non-SMP kernel - if you build a custom kernel,
|
|
the symlinks at /lib/modules/$(uname -r)/{build,source} will point to the
|
|
correct kernel source so long as you don't (re)move it.
|
|
|
|
If you want to change the resolution of the KMS console, that can be done
|
|
with something like this as a kernel append in lilo.conf:
|
|
append="video=1024x768"
|
|
|
|
Speaking of lilo.conf and KMS, make sure you use either vga=normal or
|
|
vga=extended -- some of the framebuffers don't like KMS very much...
|
|
|
|
If you have set up an encrypted root partition, you will need to have access
|
|
to your keyboard in order to type the passphrase. This may require you to
|
|
add the uhci-hcd and usbhid modules to your initrd image if you have a USB
|
|
keyboard. Also note that if you are using a non-US keyboard, you can use the
|
|
'-l' parameter to the 'mkinitrd' command in order to add support for this
|
|
keyboard to your initrd.
|
|
|
|
Subpixel hinting in freetype has been enabled upstream by default, but you
|
|
may adjust this in /etc/profile.d/freetype.{csh,sh}.
|
|
|
|
|
|
*** PACKAGE ADDITIONS SINCE 14.2 ***
|
|
|
|
a/aaa_glibc-solibs (replaces a/glibc-solibs)
|
|
a/aaa_libraries (replaces a/aaa_elflibs)
|
|
a/cracklib
|
|
a/efivar
|
|
a/elogind
|
|
a/exfatprogs
|
|
a/f2fs-tools
|
|
a/haveged
|
|
a/hostname (split from n/net-tools)
|
|
a/inih
|
|
a/lbzip2
|
|
a/lhasa (replaces a/lha)
|
|
a/libblockdev
|
|
a/libbytesize
|
|
a/libpwquality
|
|
a/lzlib
|
|
a/mlocate (replaces a/slocate)
|
|
a/ndctl
|
|
a/nvi
|
|
a/pam
|
|
a/plzip
|
|
a/volume_key
|
|
a/zerofree
|
|
ap/dash (replaces ap/ash)
|
|
ap/inxi
|
|
ap/man-db (replaces ap/man)
|
|
ap/neofetch
|
|
ap/nvme-cli
|
|
ap/opus-tools
|
|
ap/sc-im (replaces ap/sc)
|
|
ap/undervolt
|
|
ap/xorriso
|
|
d/autoconf-archive
|
|
d/check
|
|
d/gcc-brig
|
|
d/gcc-gdc
|
|
d/gnucobol (replaces d/gnu-cobol)
|
|
d/gyp
|
|
d/icecream
|
|
d/meson
|
|
d/ninja
|
|
d/opencl-headers
|
|
d/parallel
|
|
d/patchelf
|
|
d/poke
|
|
d/python-pip
|
|
d/python2 (replaces d/python)
|
|
d/python3
|
|
d/re2c
|
|
d/rinutils
|
|
d/rust
|
|
d/sassc
|
|
d/vala
|
|
e/emacspeak
|
|
kde/* (too many to reasonably list here - see UPGRADE.TXT)
|
|
l/Mako
|
|
l/PyQt5
|
|
l/QtAV
|
|
l/SDL2
|
|
l/SDL2_gfx
|
|
l/SDL2_image
|
|
l/SDL2_mixer
|
|
l/SDL2_net
|
|
l/SDL2_ttf
|
|
l/accountsservice
|
|
l/argon2
|
|
l/brotli
|
|
l/cfitsio
|
|
l/cryfs
|
|
l/cryptopp
|
|
l/dotconf
|
|
l/dvdauthor
|
|
l/espeak-ng
|
|
l/farstream
|
|
l/ffmpeg
|
|
l/fluidsynth
|
|
l/freecell-solver
|
|
l/frei0r-plugins
|
|
l/fuse3
|
|
l/gdk-pixbuf2-xlib
|
|
l/gexiv2
|
|
l/gjs
|
|
l/glade
|
|
l/gnome-themes-extra (replaces l/gnome-themes-standard)
|
|
l/graphene
|
|
l/graphite2
|
|
l/gst-plugins-libav
|
|
l/gtksourceview3
|
|
l/hyphen
|
|
l/id3lib
|
|
l/isl
|
|
l/jansson
|
|
l/jmtpfs
|
|
l/json-glib
|
|
l/kdsoap
|
|
l/keybinder3
|
|
l/lame
|
|
l/lensfun
|
|
l/libappindicator
|
|
l/libbluray
|
|
l/libburn
|
|
l/libclc
|
|
l/libcue
|
|
l/libdbusmenu
|
|
l/libdmtx
|
|
l/libedit
|
|
l/libgtop
|
|
l/libidn2
|
|
l/libindicator
|
|
l/libnice
|
|
l/libnsl
|
|
l/libnss_nis
|
|
l/libopusenc
|
|
l/libpsl
|
|
l/libqalculate
|
|
l/libsass
|
|
l/libsodium
|
|
l/libunwind
|
|
l/libuv
|
|
l/libwebp
|
|
l/libwnck3
|
|
l/libxkbcommon
|
|
l/lmdb
|
|
l/lz4
|
|
l/mlt
|
|
l/mozjs78 (replaced l/js185)
|
|
l/ocl-icd
|
|
l/oniguruma
|
|
l/openal-soft
|
|
l/opencv
|
|
l/opus
|
|
l/opusfile
|
|
l/pcaudiolib
|
|
l/pcre2
|
|
l/phonon-backend-gstreamer
|
|
l/pipewire
|
|
l/pyparsing
|
|
l/python-appdirs
|
|
l/python-certifi
|
|
l/python-chardet
|
|
l/python-distro
|
|
l/python-docutils
|
|
l/python-future
|
|
l/python-idna
|
|
l/python-notify2
|
|
l/python-packaging
|
|
l/python-ply
|
|
l/python-pygments
|
|
l/python-pysol_cards
|
|
l/python-random2
|
|
l/python-requests
|
|
l/python-sane
|
|
l/python-six
|
|
l/python-urllib3
|
|
l/python2-module-collection
|
|
l/qrencode
|
|
l/qt5
|
|
l/qt5-webkit
|
|
l/qtkeychain
|
|
l/quazip
|
|
l/rpcsvc-proto
|
|
l/rttr
|
|
l/speech-dispatcher
|
|
l/speex
|
|
l/talloc
|
|
l/tdb
|
|
l/tevent
|
|
l/tidy-html5
|
|
l/utf8proc
|
|
l/vid.stab
|
|
l/woff2
|
|
l/xxHash
|
|
l/zstd
|
|
n/dehydrated
|
|
n/dovecot
|
|
n/krb5
|
|
n/libmilter
|
|
n/nghttp2
|
|
n/npth
|
|
n/nss-pam-ldapd
|
|
n/openldap
|
|
n/pam-krb5
|
|
n/postfix
|
|
n/s-nail (replaces mailx)
|
|
n/socat
|
|
n/sshfs
|
|
n/wireless_tools (renamed from n/wireless-tools)
|
|
t/fig2dev (replaces t/transfig)
|
|
t/texlive (replaces t/tetex and t/tetex-doc)
|
|
x/OpenCC
|
|
x/cldr-emoji-annotation
|
|
x/fcitx
|
|
x/fcitx-anthy
|
|
x/fcitx-configtool
|
|
x/fcitx-hangul
|
|
x/fcitx-kkc
|
|
x/fcitx-libpinyin
|
|
x/fcitx-m17n
|
|
x/fcitx-qt5
|
|
x/fcitx-sayura
|
|
x/fcitx-table-extra
|
|
x/fcitx-table-other
|
|
x/fcitx-unikey
|
|
x/hack-fonts-ttf
|
|
x/ibus
|
|
x/ibus-anthy
|
|
x/ibus-hangul
|
|
x/ibus-kkc
|
|
x/ibus-libpinyin
|
|
x/ibus-m17n
|
|
x/ibus-table
|
|
x/ibus-unikey
|
|
x/igt-gpu-tools (replaces x/intel-gpu-tools)
|
|
x/intel-vaapi-driver (replaces x/libva-intel-driver)
|
|
x/libXfont2
|
|
x/libgee
|
|
x/libglvnd
|
|
x/libinput
|
|
x/libkkc
|
|
x/libkkc-data
|
|
x/libmypaint
|
|
x/libpinyin
|
|
x/libva-utils
|
|
x/libwacom
|
|
x/marisa
|
|
x/mypaint-brushes
|
|
x/noto-cjk-fonts-ttf
|
|
x/noto-fonts-ttf
|
|
x/pyxdg
|
|
x/skkdic
|
|
x/ttf-tlwg
|
|
x/urw-core35-fonts-otf
|
|
x/vulkan-sdk
|
|
x/wayland
|
|
x/wayland-protocols
|
|
x/xf86-input-libinput
|
|
x/xf86-video-vboxvideo
|
|
x/xisxwayland
|
|
x/xorg-server-xwayland
|
|
x/xorgproto (replaces all of the other x/*proto packages)
|
|
xap/NetworkManager-openvpn
|
|
xap/easytag
|
|
xap/ffmpegthumbnailer
|
|
xap/libnma
|
|
xap/rxvt-unicode (replaces xap/rxvt)
|
|
xap/ssr
|
|
xap/xsnow
|
|
xfce/Greybird
|
|
xfce/elementary-xfce
|
|
xfce/mousepad
|
|
xfce/thunar (replaces xfce/Thunar)
|
|
xfce/xfce4-panel-profiles
|
|
xfce/xfce4-screensaver
|
|
xfce/xfce4-whiskermenu-plugin
|
|
y/nethack
|
|
|
|
|
|
*** PACKAGE REMOVALS SINCE 14.2 ***
|
|
|
|
a/aaa_elflibs (replaced by a/aaa_libraries)
|
|
a/glibc-solibs (replaced by a/aaa_glibc-solibs)
|
|
a/eject (included in a/util-linux)
|
|
a/getty-ps (moved to /extra)
|
|
a/lha (replaced by a/lhasa)
|
|
a/slocate (replaced by a/mlocate)
|
|
ap/ash (replaced by ap/dash)
|
|
ap/cgmanager (obsoleted by a/elogind)
|
|
ap/man (replaced by ap/man-db)
|
|
ap/pm-utils (obsoleted by a/elogind)
|
|
ap/sc (replaced by ap/sc-im)
|
|
ap/workbone
|
|
d/gcc-java
|
|
d/gnu-cobol (replaced by d/gnucobol)
|
|
d/python (replaced by d/python2)
|
|
kde/* (too many to reasonably list here - see UPGRADE.TXT)
|
|
kdei/* (too many to reasonably list here)
|
|
l/ConsoleKit2 (obsoleted by a/elogind)
|
|
l/PyQt
|
|
l/automoc4
|
|
l/db42
|
|
l/db44
|
|
l/glade3 (replaced by l/glade)
|
|
l/gnome-themes-standard (replaced by l/gnome-themes-extra)
|
|
l/gst-plugins-base0
|
|
l/gst-plugins-good0
|
|
l/gstreamer0
|
|
l/herqq
|
|
l/ilmbase
|
|
l/js185 (replaced by l/mozjs78)
|
|
l/keybinder (replaced by l/keybinder3)
|
|
l/libart_lgpl
|
|
l/libbluedevil
|
|
l/libcroco
|
|
l/liblastfm
|
|
l/libmcs
|
|
l/libmowgli
|
|
l/libmsn
|
|
l/libtermcap
|
|
l/libwmf-docs (merged with l/libwmf)
|
|
l/notify-python (replaced by python-notify2)
|
|
l/phonon-gstreamer
|
|
l/pyrex
|
|
l/qimageblitz
|
|
l/qjson
|
|
l/qt (replaced by l/qt5)
|
|
l/qt-gstreamer
|
|
l/qtscriptgenerator
|
|
l/raptor2
|
|
l/rasqal
|
|
l/redland
|
|
l/seamonkey-solibs
|
|
l/soprano
|
|
l/strigi
|
|
l/urwid
|
|
l/virtuoso-ose
|
|
n/dirmngr
|
|
n/idnkit
|
|
n/imapd
|
|
n/mailx (replaced by n/s-nail)
|
|
n/openldap-client
|
|
n/pth
|
|
n/rfkill (included in a/util-linux)
|
|
n/sendmail (moved to /extra ; replaced by n/postfix and n/libmilter)
|
|
n/sendmail-cf (moved to /extra ; replaced by n/postfix and n/libmilter)
|
|
n/trn
|
|
n/wireless-tools (renamed to n/wireless_tools)
|
|
t/tetex (replaced by t/texlive)
|
|
t/tetex-doc (replaced by t/texlive)
|
|
t/transfig (replaced by t/fig2dev)
|
|
x/bigreqsproto (replaced by x/xorgproto)
|
|
x/compositeproto (replaced by x/xorgproto)
|
|
x/damageproto (replaced by x/xorgproto)
|
|
x/dmxproto (replaced by x/xorgproto)
|
|
x/dri2proto (replaced by x/xorgproto)
|
|
x/dri3proto (replaced by x/xorgproto)
|
|
x/evieext (replaced by x/xorgproto)
|
|
x/fixesproto (replaced by x/xorgproto)
|
|
x/fontcacheproto (replaced by x/xorgproto)
|
|
x/fontsproto (replaced by x/xorgproto)
|
|
x/glproto (replaced by x/xorgproto)
|
|
x/inputproto (replaced by x/xorgproto)
|
|
x/intel-gpu-tools (replaced by x/igt-gpu-tools)
|
|
x/kbproto (replaced by x/xorgproto)
|
|
x/libXfont (deprecated)
|
|
x/libva-intel-driver (replaced by x/intel-vaapi-driver)
|
|
x/mkfontdir (absorbed into x/mkfontscale)
|
|
x/presentproto (replaced by x/xorgproto)
|
|
x/printproto (replaced by x/xorgproto)
|
|
x/randrproto (replaced by x/xorgproto)
|
|
x/recordproto (replaced by x/xorgproto)
|
|
x/renderproto (replaced by x/xorgproto)
|
|
x/resourceproto (replaced by x/xorgproto)
|
|
x/scim
|
|
x/scim-anthy
|
|
x/scim-hangul
|
|
x/scim-input-pad
|
|
x/scim-m17n
|
|
x/scim-pinyin
|
|
x/scim-tables
|
|
x/scrnsaverproto (replaced by x/xorgproto)
|
|
x/videoproto (replaced by x/xorgproto)
|
|
x/xcmiscproto (replaced by x/xorgproto)
|
|
x/xextproto (replaced by x/xorgproto)
|
|
x/xf86-video-xgi
|
|
x/xf86-video-xgixp
|
|
x/xf86bigfontproto (replaced by x/xorgproto)
|
|
x/xf86dgaproto (replaced by x/xorgproto)
|
|
x/xf86driproto (replaced by x/xorgproto)
|
|
x/xf86miscproto (replaced by x/xorgproto)
|
|
x/xf86vidmodeproto (replaced by x/xorgproto)
|
|
x/xineramaproto (replaced by x/xorgproto)
|
|
x/xproto (replaced by x/xorgproto)
|
|
xap/rxvt (replaced by xap/rxvt-unicode)
|
|
xap/xfractint (moved to /extra)
|
|
xap/xv (moved to /extra)
|
|
xfce/Thunar (replaced by xfce/thunar)
|
|
xfce/gtk-xfce-engine
|
|
xfce/orage
|
|
extra/bittorrent/bittorrent
|
|
extra/mplayerplug-in/mplayerplug-in
|
|
extra/recordmydesktop/recordmydesktop
|
|
|