a/pkgtools-15.0-noarch-24.txz: Rebuilt.
installpkg: support --no-overwrite option for upgradepkg's second install
pass. Don't use this option directly unless you have a good reason.
upgradepkg: call installpkg with --no-overwrite for the second install pass.
This cuts the drive writes for a package upgrade almost in half so we can
be kinder to SSDs.
ap/nano-4.5-x86_64-1.txz: Upgraded.
l/gmime-3.2.4-x86_64-1.txz: Upgraded.
l/gnu-efi-3.0.10-x86_64-1.txz: Upgraded.
l/gtk+3-3.24.12-x86_64-1.txz: Upgraded.
testing/packages/rust-1.38.0-x86_64-2.txz: Rebuilt.
The package size here has been put on a tremendous diet.
Thanks to Andrew Clemons and Willy Sudiarto Raharjo for help with this.
Compile test results:
firefox-68.1.0esr: fail
firefox-69.0.2: pass
seamonkey-2.49.5: pass
thunderbird-68.1.1: fail
a/pkgtools-15.0-noarch-23.txz: Rebuilt.
Removed stray cat and loop kludges for lack of reported size, since this
is fixed now in tar.
a/tar-1.30-x86_64-3.txz: Rebuilt.
Fixed a bug in the nolonezero patch that was evidently causing all of the
issues in installpkg that we'd been kludging around (e.g. the "stray cat").
Thanks *very* much to NonNonBa for the patch, and to SeB for the initial
analysis of the problem.
ap/ghostscript-9.24-x86_64-2.txz: Rebuilt.
Applied upstream patch to fix "Filter failed". Thanks to th_r and bamunds.
d/gdb-8.2-x86_64-1.txz: Upgraded.
d/indent-2.2.12-x86_64-1.txz: Upgraded.
isolinux/initrd.img: Rebuilt.
usb-and-pxe-installers/usbboot.img: Rebuilt.
a/acpid-2.0.30-x86_64-1.txz: Upgraded.
a/etc-15.0-x86_64-9.txz: Rebuilt.
Added support for /etc/ld.so.conf.d/. Thanks to Qury.
a/kernel-firmware-20180904_85c5d90-noarch-1.txz: Upgraded.
a/kernel-generic-4.14.68-x86_64-1.txz: Upgraded.
a/kernel-huge-4.14.68-x86_64-1.txz: Upgraded.
a/kernel-modules-4.14.68-x86_64-1.txz: Upgraded.
a/pkgtools-15.0-noarch-22.txz: Rebuilt.
installpkg: prevent noise from the "stray cat" if tar hands it a broken
pipe. Thanks to ivandi.
Also (in the comments) provide a possibly better but untested solution.
Thanks to SeB.
a/sysvinit-2.90-x86_64-2.txz: Rebuilt.
sysvinit-2.90 added an undocumented feature that tries to spawn agetty
if it sees console= in the kernel command line. Avoiding the debate about
whether this code belongs in init at all, at least such a change should
be documented, and probably made opt-in. This patch disables the new
behavior unless "sysvinit_agetty" is also seen in the kernel command line.
It seems like this might have been something added for Hurd, and it might
be wise to stick to what we've got rather than following upstream on this
particular package. If anyone notices any other odd behavior, please let
me know. Thanks to shastah.
a/sysvinit-scripts-2.1-noarch-19.txz: Rebuilt.
When checking for intel_pstate, direct the stderr to /dev/null in case
the file doesn't exist in /sys. Thanks to ivandi.
Allow forcing an option by editing /etc/default/cpufreq.
ap/cups-filters-1.21.2-x86_64-1.txz: Upgraded.
ap/ghostscript-9.24-x86_64-1.txz: Upgraded.
Patched multiple -dSAFER sandbox bypass vulnerabilities.
Thanks to Tavis Ormandy.
For more information, see:
https://www.ghostscript.com/doc/9.24/News.htmhttps://www.kb.cert.org/vuls/id/332928
(* Security fix *)
ap/sudo-1.8.25-x86_64-1.txz: Upgraded.
d/binutils-2.31.1-x86_64-2.txz: Rebuilt.
elf.c (_bfd_elf_get_symbol_version_string): Return _("<corrupt>") for
corrupt symbol version info.
elflink.c (bfd_elf_record_link_assignment): Always clear h->verinfo.verdef
when overriding a dynamic definition.
Thanks to Michael Short for pointing out the upstream patches.
d/ccache-3.4.3-x86_64-1.txz: Upgraded.
d/kernel-headers-4.14.68-x86-1.txz: Upgraded.
d/llvm-6.0.1-x86_64-2.txz: Rebuilt.
Recompiled with -DCLANG_BUILD_SHARED_LIBS=ON to fix issues when multiple
OpenCL drivers are installed. Thanks to Heinz Wiesinger.
d/mercurial-4.7.1-x86_64-1.txz: Upgraded.
k/kernel-source-4.14.68-noarch-1.txz: Upgraded.
l/mozilla-nss-3.39-x86_64-1.txz: Upgraded.
n/curl-7.61.1-x86_64-1.txz: Upgraded.
This update fixes an NTLM password overflow via integer overflow.
For more information, see:
https://curl.haxx.se/docs/CVE-2018-14618.htmlhttps://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-14618
(* Security fix *)
n/gnupg2-2.2.10-x86_64-1.txz: Upgraded.
n/libtirpc-1.1.4-x86_64-1.txz: Upgraded.
n/netatalk-3.1.11-x86_64-2.txz: Rebuilt.
rc.atalk: fixed errors in status output. Thanks to marav.
n/nghttp2-1.33.0-x86_64-1.txz: Upgraded.
n/p11-kit-0.23.14-x86_64-1.txz: Upgraded.
n/stunnel-5.49-x86_64-1.txz: Upgraded.
x/libdrm-2.4.94-x86_64-1.txz: Upgraded.
x/xf86-video-ati-20180824_de88ea27-x86_64-1.txz: Upgraded.
xap/hexchat-2.14.2-x86_64-1.txz: Upgraded.
xap/mozilla-firefox-60.2.0esr-x86_64-1.txz: Upgraded.
This release contains security fixes and improvements.
For more information, see:
https://www.mozilla.org/security/known-vulnerabilities/firefoxESR.html
(* Security fix *)
xap/xlockmore-5.56-x86_64-1.txz: Upgraded.
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
a/kernel-generic-4.14.54-x86_64-1.txz: Upgraded.
a/kernel-huge-4.14.54-x86_64-1.txz: Upgraded.
a/kernel-modules-4.14.54-x86_64-1.txz: Upgraded.
a/pkgtools-15.0-noarch-21.txz: Rebuilt.
Modify makepkg to make reproducible builds possible:
makepkg: sort symlinks in doinst.sh
makepkg: sort the filelist piped into tar
makepkg: add the -n flag to gzip to avoid embedding a timestamp
makepkg: support the SOURCE_DATE_EPOCH environment variable
Thanks to David Spencer.
d/kernel-headers-4.14.54-x86-1.txz: Upgraded.
k/kernel-source-4.14.54-noarch-1.txz: Upgraded.
IP_FIB_TRIE_STATS n -> y
NETWORK_PHY_TIMESTAMPING n -> y
NET_KEY_MIGRATE n -> y
NF_CONNTRACK_EVENTS n -> y
NF_CONNTRACK_TIMEOUT n -> y
NF_CONNTRACK_TIMESTAMP n -> y
TCP_MD5SIG n -> y
VLAN_8021Q_MVRP n -> y
XFRM_MIGRATE n -> y
+DP83640_PHY m
+MRP m
Thanks to Wayne, aka slackwhere on LQ.
l/QScintilla-2.10.7-x86_64-1.txz: Upgraded.
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
a/dcron-4.5-x86_64-8.txz: Rebuilt.
rc.crond: match the running process more accurately.
a/glibc-zoneinfo-2018e-noarch-3.txz: Rebuilt.
Don't emit an error if the /etc/localtime-copied-from is not present when
the package is initially installed.
a/libcgroup-0.41-x86_64-5.txz: Rebuilt.
Added /etc/cgconfig.d/ directory.
a/pkgtools-15.0-noarch-19.txz: Rebuilt.
installpkg, makebootdisk, removepkg, upgradepkg: don't try to remove admin
directories (supposedly "in case" they are a symlink).
a/sysvinit-scripts-2.1-noarch-12.txz: Rebuilt.
rc.6: stop haveged
rc.S: start rc.cgconfig and rc.cgred
ap/at-3.1.20-x86_64-5.txz: Rebuilt.
rc.atd: match the running process more accurately.
ap/slackpkg-2.83.0-noarch-2.txz: Rebuilt.
Patched to handle the case where /var/log/packages is a symlink.
l/gsl-2.5-x86_64-1.txz: Upgraded.
a/dcron-4.5-x86_64-7.txz: Rebuilt.
Added init script and defaults file.
Moved TMPDIR to /run/cron.
Thanks to Robby Workman and shasta.
a/efibootmgr-16-x86_64-1.txz: Upgraded.
a/efivar-36-x86_64-1.txz: Added.
a/elilo-3.16-x86_64-7.txz: Rebuilt.
a/glibc-solibs-2.27-x86_64-4.txz: Rebuilt.
Don't restart init in the install script, let rc.6 handle it.
a/haveged-1.9.2-x86_64-1.txz: Added.
a/pkgtools-15.0-noarch-18.txz: Rebuilt.
setup.services: add support for rc.atd and rc.crond
a/sysvinit-scripts-2.1-noarch-10.txz: Rebuilt.
rc.6: restart init when shutting down - this prevents it from holding file
handles to removed/upgraded versions of the glibc shared libraries which
would interfere with shutdown.
rc.K: use full path to telinit
rc.M: start rc.atd and rc.crond
rc.M: don't remove cron tempfiles (moved to /run/cron)
rc.S: start rc.haveged
ap/at-3.1.20-x86_64-3.txz: Rebuilt.
Added init script and defaults file.
l/glibc-2.27-x86_64-4.txz: Rebuilt.
Don't restart init in the install script, let rc.6 handle it.
l/glibc-i18n-2.27-x86_64-4.txz: Rebuilt.
l/glibc-profile-2.27-x86_64-4.txz: Rebuilt.
l/gnu-efi-3.0.8-x86_64-1.txz: Upgraded.
a/kernel-firmware-20180606_d114732-noarch-1.txz: Upgraded.
a/kernel-generic-4.14.49-x86_64-1.txz: Upgraded.
a/kernel-huge-4.14.49-x86_64-1.txz: Upgraded.
a/kernel-modules-4.14.49-x86_64-1.txz: Upgraded.
a/libcgroup-0.41-x86_64-4.txz: Rebuilt.
Apply all post 0.41 patches from git, including one for an infinite loop
bug that causes 100% CPU usage on one core. Thanks to chris.willing.
a/pkgtools-15.0-noarch-17.txz: Rebuilt.
installpkg: Use terse mode if TERSE=0 is set in the environment (this already
works for removepkg and upgradepkg). This allows using terse mode in other
tools that use the pkgtools (such as slackpkg with: TERSE=0 slackpkg).
Thanks to Xsane.
ap/hplip-3.18.6-x86_64-1.txz: Upgraded.
d/kernel-headers-4.14.49-x86-1.txz: Upgraded.
k/kernel-source-4.14.49-noarch-1.txz: Upgraded.
GPIO_AMDPT n -> m (thanks to walecha)
NFSD_V3_ACL n -> y (thanks to Jonathan Woithe)
NFS_V3_ACL n -> y (thanks to Jonathan Woithe)
NFS_V4_2 n -> y
+NFSD_V2_ACL y
+NFS_ACL_SUPPORT y
+NFS_V4_SECURITY_LABEL y
l/LibRaw-0.18.12-x86_64-1.txz: Upgraded.
This update fixes bugs and security issues, including:
parse_qt: possible integer overflow
reject broken/crafted NOKIARAW files
recover read position if TIFF/EXIF tag is too long
possible infinite loop in parse_minolta()
possible stack overrun in X3F parser
out of bounds read in X3F parser
For more information, see:
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-13735https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-14265https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-10528https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-10529
(* Security fix *)
l/dconf-0.26.1-x86_64-3.txz: Rebuilt.
Eliminate install script noise.
l/dconf-editor-3.26.2-x86_64-3.txz: Rebuilt.
Eliminate install script noise.
n/iproute2-4.17.0-x86_64-1.txz: Upgraded.
x/wqy-zenhei-font-ttf-0.8.38_1-noarch-7.txz: Rebuilt.
Try to avoid overriding other font choices unless lang = zh-cn or zh-sg.
x/xkbcomp-1.4.2-x86_64-1.txz: Upgraded.
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
a/glibc-solibs-2.27-x86_64-3.txz: Rebuilt.
a/pkgtools-15.0-noarch-16.txz: Rebuilt.
upgradepkg: clean up --help output and add options
upgradepkg: accept -help option (not just --help)
upgradepkg: don't omit error messages in --terse mode
upgradepkg: only print missing new package in old%new mode
upgradepkg.8: move information about config file handling from BUGS to the
DESCRIPTION section
Thanks to Xsane.
ap/vim-8.1.0039-x86_64-1.txz: Upgraded.
l/glibc-2.27-x86_64-3.txz: Rebuilt.
When installing the package, remove old versions of the glibc shared
libraries. In addition to eliminating residue on the system from old
package versions, this change will make it possible in the future to
revert to older glibc packages using upgradepkg.
l/glibc-i18n-2.27-x86_64-3.txz: Rebuilt.
l/glibc-profile-2.27-x86_64-3.txz: Rebuilt.
n/gnupg2-2.2.8-x86_64-1.txz: Upgraded.
Sanitize the diagnostic output of the original file name in verbose mode.
By using a made up file name in the message it was possible to fake status
messages. Using this technique it was for example possible to fake the
verification status of a signed mail.
For more information, see:
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-12020
(* Security fix *)
xap/vim-gvim-8.1.0039-x86_64-1.txz: Upgraded.
a/mcelog-158-x86_64-1.txz: Upgraded.
a/pkgtools-15.0-noarch-15.txz: Rebuilt.
installpkg, upgradepkg: test tty -s before using tput. Thanks to aaazen.
d/cmake-3.11.3-x86_64-1.txz: Upgraded.
l/imagemagick-6.9.9_49-x86_64-1.txz: Upgraded.
Support OpenMP. This had been disabled years ago due to issues with perl
modules, but probably that's been fixed by now. Thanks to olear.
l/pygobject3-3.28.3-x86_64-1.txz: Upgraded.
x/xf86-input-evdev-2.10.6-x86_64-1.txz: Upgraded.
x/xf86-input-synaptics-1.9.1-x86_64-1.txz: Upgraded.
xap/fvwm-2.6.8-x86_64-1.txz: Upgraded.
extra/xf86-video-fbdev/xf86-video-fbdev-0.5.0-x86_64-1.txz: Upgraded.
a/kernel-generic-4.14.47-x86_64-1.txz: Upgraded.
a/kernel-huge-4.14.47-x86_64-1.txz: Upgraded.
SCSI_DPT_I2O m -> y
SCSI_ISCI m -> y (thanks to wael_h)
a/kernel-modules-4.14.47-x86_64-1.txz: Upgraded.
a/pkgtools-15.0-noarch-14.txz: Rebuilt.
installpkg: rarely, an uncompressed size that's not quite to the next level
(e.g., 1020K) will exceed the expected length and cause a --terse line to
be one character longer than --terselength. Chop lines to --terselength
before outputting them. The trailing ']' might be dropped, but no big deal.
ap/slackpkg-2.83.0-noarch-1.txz: Upgraded.
Release 2.83.0; thanks to orbea, Didier Spaier, burdi01, David Allen,
Eduard Rozenberg, and Stuart Winter for various fixes and enhancements.
Allow using vimdiff to compare .new and original files
Numerous fixups for alternate $ROOT
.new config files are sorted so that display order should be consistent
among multiple machines
Abort operation if system date is near epoch (mostly relevant for ARM
machines and others with no RTC)
Update Slackware ARM gpg key
Update Slackware ARM mirror list
No longer offer to run lilo - simply advise user that the kernel image has
changed and give advice, but also require a keypress to (hopefully) confirm
that the message was actually read
mandoc lint fixes to slackpkg.8
Warn user if a -current mirror is selected (but only warn once)
d/git-2.17.1-x86_64-1.txz: Upgraded.
d/kernel-headers-4.14.47-x86-1.txz: Upgraded.
d/rust-1.26.1-x86_64-1.txz: Upgraded.
k/kernel-source-4.14.47-noarch-1.txz: Upgraded.
l/fftw-3.3.8-x86_64-1.txz: Upgraded.
l/imagemagick-6.9.9_48-x86_64-1.txz: Upgraded.
n/network-scripts-15.0-noarch-8.txz: Rebuilt.
Allow setting an interface in promiscuous mode; this is needed for networking
to function properly in containers
Fixup setting of IPALIASES (allow non /32 masks; not only is the /32 mask not
required and even undesirable in some cases, this makes ipv6 support easier
to integrate (and Darren is working on that as well)
Thanks to Darren Austin.
n/stunnel-5.46-x86_64-1.txz: Upgraded.
n/ulogd-2.0.7-x86_64-2.txz: Rebuilt.
Fixed empty logrotate file.
x/xorg-server-1.20.0-x86_64-2.txz: Rebuilt.
Patched to fix nouveau segfault. Thanks to Rod3775 for the patch.
x/xorg-server-xephyr-1.20.0-x86_64-2.txz: Rebuilt.
x/xorg-server-xnest-1.20.0-x86_64-2.txz: Rebuilt.
x/xorg-server-xvfb-1.20.0-x86_64-2.txz: Rebuilt.
xap/network-manager-applet-1.8.12-x86_64-2.txz: Rebuilt.
Patched crash bug. Thanks to gmgf.
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
a/pkgtools-15.0-noarch-13.txz: Rebuilt.
installpkg: default line length for --terselength is the number of columns.
removepkg: added --terse mode.
upgradepkg: default line length for --terselength is the number of columns.
upgradepkg: accept -option in addition to --option.
ap/vim-8.1.0026-x86_64-1.txz: Upgraded.
d/bison-3.0.5-x86_64-1.txz: Upgraded.
e/emacs-26.1-x86_64-1.txz: Upgraded.
kde/kopete-4.14.3-x86_64-8.txz: Rebuilt.
Recompiled against libidn-1.35.
n/conntrack-tools-1.4.5-x86_64-1.txz: Upgraded.
n/libnetfilter_conntrack-1.0.7-x86_64-1.txz: Upgraded.
n/libnftnl-1.1.0-x86_64-1.txz: Upgraded.
n/links-2.16-x86_64-2.txz: Rebuilt.
Rebuilt to enable X driver for -g mode.
n/lynx-2.8.9dev.19-x86_64-1.txz: Upgraded.
n/nftables-0.8.5-x86_64-1.txz: Upgraded.
n/p11-kit-0.23.11-x86_64-1.txz: Upgraded.
n/ulogd-2.0.7-x86_64-1.txz: Upgraded.
n/whois-5.3.1-x86_64-1.txz: Upgraded.
xap/network-manager-applet-1.8.12-x86_64-1.txz: Upgraded.
xap/vim-gvim-8.1.0026-x86_64-1.txz: Upgraded.
Thu Jun 30 20:26:57 UTC 2016
Slackware 14.2 x86_64 stable is released!
The long development cycle (the Linux community has lately been living in
"interesting times", as they say) is finally behind us, and we're proud to
announce the release of Slackware 14.2. The new release brings many updates
and modern tools, has switched from udev to eudev (no systemd), and adds
well over a hundred new packages to the system. Thanks to the team, the
upstream developers, the dedicated Slackware community, and everyone else
who pitched in to help make this release a reality.
The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a dual-sided
32-bit/64-bit x86/x86_64 DVD. Please consider supporting the Slackware
project by picking up a copy from store.slackware.com. We're taking
pre-orders now, and offer a discount if you sign up for a subscription.
Have fun! :-)
Mon Nov 4 17:08:47 UTC 2013
Slackware 14.1 x86_64 stable is released!
It's been another interesting release cycle here at Slackware bringing
new features like support for UEFI machines, updated compilers and
development tools, the switch from MySQL to MariaDB, and many more
improvements throughout the system. Thanks to the team, the upstream
developers, the dedicated Slackware community, and everyone else who
pitched in to help make this release a reality.
The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a
dual-sided
32-bit/64-bit x86/x86_64 DVD. Please consider supporting the Slackware
project by picking up a copy from store.slackware.com. We're taking
pre-orders now, and offer a discount if you sign up for a subscription.
Have fun! :-)
Wed Sep 26 01:10:42 UTC 2012
Slackware 14.0 x86_64 stable is released!
We're perfectionists here at Slackware, so this release has been a long
time a-brewing. But we think you'll agree that it was worth the wait.
Slackware 14.0 combines modern components, ease of use, and flexible
configuration... our "KISS" philosophy demands it.
The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a
dual-sided
32-bit/64-bit x86/x86_64 DVD. Please consider supporting the Slackware
project by picking up a copy from store.slackware.com. We're taking
pre-orders now, and offer a discount if you sign up for a subscription.
Thanks to everyone who helped make this happen. The Slackware team, the
upstream developers, and (of course) the awesome Slackware user
community.
Have fun! :-)
Mon Apr 25 13:37:00 UTC 2011
Slackware 13.37 x86_64 stable is released!
Thanks to everyone who pitched in on this release: the Slackware team,
the folks producing upstream code, and linuxquestions.org for providing
a great forum for collaboration and testing.
The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a
dual-sided
32-bit/64-bit x86/x86_64 DVD. Please consider supporting the Slackware
project by picking up a copy from store.slackware.com. We're taking
pre-orders now, and offer a discount if you sign up for a subscription.
As always, thanks to the Slackware community for testing, suggestions,
and feedback. :-)
Have fun!
Wed May 19 08:58:23 UTC 2010
Slackware 13.1 x86_64 stable is released!
Lots of thanks are due -- see the RELEASE_NOTES and the rest of the
ChangeLog for credits. The ISOs are on their way to replication,
a 6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We are taking pre-orders now at store.slackware.com, and offering
a discount if you sign up for a subscription. Consider picking up
a copy to help support the project. Thanks again to the Slackware
community for testing, contributing, and generally holding us to a
high level of quality. :-)
Enjoy!
Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable! Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits. The ISOs are off to the replicator. This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com. Please consider
picking up a copy to help support the project. Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy! -P.
