ap/mariadb-10.4.11-x86_64-1.txz: Upgraded.
d/cmake-3.16.1-x86_64-1.txz: Upgraded.
d/git-2.24.1-x86_64-1.txz: Upgraded.
l/mozjs52-52.9.0esr-x86_64-2.txz: Removed.
This was used only by polkit-0.115.
l/mozjs60-60.9.0esr-x86_64-1.txz: Added.
This is needed for polkit-0.116.
l/polkit-0.116-x86_64-1.txz: Upgraded.
n/ModemManager-1.12.2-x86_64-1.txz: Upgraded.
xap/xine-ui-0.99.12-x86_64-1.txz: Upgraded.
a/etc-15.0-x86_64-10.txz: Rebuilt.
Fix "include /etc/ld.so.conf.d/*.conf" repeats in /etc/ld.so.conf.
l/imagemagick-6.9.10_64-x86_64-1.txz: Upgraded.
l/seamonkey-solibs-2.49.5-x86_64-1.txz: Removed.
This package was included years ago to support a few things that needed
nss/nspr, but we've since included that in the mozilla-nss package.
Nothing should be using this anymore.
xap/seamonkey-2.49.5-x86_64-2.txz: Rebuilt.
Added additional options to more closely match the official build:
--enable-rust --enable-js-shell --enable-elf-hack --enable-release
--enable-calendar
Thanks to ljb643 for the bug report.
Removed /usr/lib{,64}/seamonkey from /etc/ld.so.conf.
ap/qpdf-8.3.0-x86_64-1.txz: Upgraded.
l/argon2-20171227-x86_64-1.txz: Added.
This is a new dependency for the PHP package.
n/libmbim-1.18.0-x86_64-1.txz: Upgraded.
n/libqmi-1.22.0-x86_64-1.txz: Upgraded.
n/php-7.2.14-x86_64-1.txz: Upgraded.
Use --with-password-argon2. PHP now requires the new argon2 package.
a/elilo-3.16-x86_64-9.txz: Rebuilt.
eliloconfig: don't assume that mount output lists the / partition first.
a/f2fs-tools-1.12.0-x86_64-1.txz: Added.
a/kernel-generic-4.19.5-x86_64-1.txz: Upgraded.
a/kernel-huge-4.19.5-x86_64-1.txz: Upgraded.
CRYPTO_CRC32 m -> y
F2FS_FS m -> y
a/kernel-modules-4.19.5-x86_64-1.txz: Upgraded.
a/sysvinit-scripts-2.1-noarch-22.txz: Rebuilt.
rc.S: if we're using F2FS for the root filesystem, don't try to check it as
fsck.f2fs throws an error on trying to check a read-only filesystem.
d/clisp-2.49_20181112_df3b9f6fd-x86_64-1.txz: Upgraded.
d/kernel-headers-4.19.5-x86-1.txz: Upgraded.
k/kernel-source-4.19.5-noarch-1.txz: Upgraded.
l/graphite2-1.3.12-x86_64-1.txz: Added.
Required by harfbuzz in order to use it as a system library for TeXlive.
l/harfbuzz-2.1.3-x86_64-1.txz: Upgraded.
Requires graphite2-1.3.12.
t/texlive-2018.180822-x86_64-4.txz: Rebuilt.
Use system harfbuzz, not the bundled version.
isolinux/initrd.img: Rebuilt.
Activate LVM volumes at boot, not only when setup is run.
Make /etc/mtab a symlink to /proc/mounts on the installer.
On a freshly installed system, make /etc/mtab a symlink to /proc/mounts.
Include f2fs-tools on the installer.
Support installing on F2FS partitions.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
a/kernel-generic-4.19.3-x86_64-1.txz: Upgraded.
a/kernel-huge-4.19.3-x86_64-1.txz: Upgraded.
a/kernel-modules-4.19.3-x86_64-1.txz: Upgraded.
a/openssl-solibs-1.1.1a-x86_64-1.txz: Upgraded.
a/sysvinit-scripts-2.1-noarch-21.txz: Rebuilt.
rc.S: Don't run rc.fuse - udev takes care of the FUSE module and filesystem.
rc.S: Support replacing the /etc/mtab file with a symlink to /proc/mounts.
rc.6: Show more information when unmounting filesystems at shutdown.
ap/ghostscript-9.26-x86_64-1.txz: Upgraded.
ap/mariadb-10.3.11-x86_64-1.txz: Upgraded.
This update fixes bugs and security issues.
For more information, see:
https://mariadb.com/kb/en/library/mariadb-10311-release-notes/https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3282
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2016-9843
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3174
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3143
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3156
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3251
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3185
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3277
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3162
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3173
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3200
https://cve.mitre.org/cgi-bin/cvename.cgi?name= CVE-2018-3284
(* Security fix *)
d/cmake-3.13.0-x86_64-1.txz: Upgraded.
d/git-2.19.2-x86_64-1.txz: Upgraded.
d/kernel-headers-4.14.63-x86-1.txz: Upgraded.
d/kernel-headers-4.19.3-x86-1.txz: Upgraded.
d/vala-0.42.3-x86_64-1.txz: Added.
k/kernel-source-4.19.3-noarch-1.txz: Upgraded.
l/adwaita-icon-theme-3.30.0-noarch-1.txz: Upgraded.
l/at-spi2-atk-2.30.0-x86_64-1.txz: Upgraded.
l/at-spi2-core-2.30.0-x86_64-1.txz: Upgraded.
l/atk-2.30.0-x86_64-1.txz: Upgraded.
l/atkmm-2.28.0-x86_64-1.txz: Upgraded.
l/dconf-0.28.0-x86_64-1.txz: Upgraded.
dconf and dconf-editor require Vala; the alternative would be to try to
stick with the old versions forever, and we don't want to do that.
l/dconf-editor-3.30.2-x86_64-1.txz: Upgraded.
l/gcr-3.28.0-x86_64-3.txz: Rebuilt.
Recompiled to add Vala bindings.
l/gdk-pixbuf2-2.38.0-x86_64-1.txz: Upgraded.
l/gexiv2-0.10.9-x86_64-1.txz: Upgraded.
l/glib-networking-2.58.0-x86_64-1.txz: Upgraded.
l/glib2-2.58.1-x86_64-1.txz: Upgraded.
l/glibmm-2.58.0-x86_64-1.txz: Upgraded.
l/gobject-introspection-1.58.0-x86_64-1.txz: Upgraded.
l/gtk+3-3.24.1-x86_64-1.txz: Upgraded.
l/gtkmm3-3.24.0-x86_64-1.txz: Upgraded.
l/gvfs-1.38.1-x86_64-1.txz: Upgraded.
l/libcap-2.26-x86_64-1.txz: Upgraded.
l/libpsl-0.20.1-x86_64-1.txz: Added.
Required by libsoup.
l/libsoup-2.64.2-x86_64-1.txz: Upgraded.
l/pangomm-2.42.0-x86_64-1.txz: Upgraded.
l/pygobject3-3.30.2-x86_64-1.txz: Upgraded.
l/vte-0.54.2-x86_64-1.txz: Upgraded.
n/openssl-1.1.1a-x86_64-1.txz: Upgraded.
This update fixes timing side channel attacks on DSA and ECDSA signature
generation that could allow an attacker to recover the private key.
For more information, see:
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-0734https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-0735
(* Security fix *)
x/pixman-0.36.0-x86_64-1.txz: Upgraded.
xfce/xfce4-terminal-0.8.7.4-x86_64-2.txz: Rebuilt.
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
l/js185-1.0.0-x86_64-2.txz: Removed.
l/libwebp-1.0.1-x86_64-1.txz: Upgraded.
l/mozjs52-52.9.0esr-x86_64-1.txz: Added.
Required by the new version of polkit.
l/polkit-0.115-x86_64-1.txz: Upgraded.
Thanks to Robby Workman.
a/aaa_terminfo-6.1_20181110-x86_64-1.txz: Upgraded.
a/kernel-generic-4.19.2-x86_64-1.txz: Upgraded.
a/kernel-huge-4.19.2-x86_64-1.txz: Upgraded.
a/kernel-modules-4.19.2-x86_64-1.txz: Upgraded.
ap/vim-8.1.0526-x86_64-1.txz: Upgraded.
Don't package .desktop files for the base vim package.
Move the terminal-based vim.desktop (menu clutter) into the docs directory.
d/kernel-headers-4.19.2-x86-1.txz: Upgraded.
k/kernel-source-4.19.2-noarch-1.txz: Upgraded.
l/librsvg-2.44.9-x86_64-1.txz: Upgraded.
l/ncurses-6.1_20181110-x86_64-1.txz: Upgraded.
The new kernel fixes the artifact on the virtual console, so the original
linux terminal definition has been restored.
xap/vim-gvim-8.1.0526-x86_64-1.txz: Upgraded.
Let vim install its own icon and gvim.desktop files. Thanks to drumz.
Don't include the terminal-based vim.desktop file.
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
a/eudev-3.2.5-x86_64-4.txz: Upgraded.
More bugs, unreplaced macros, and systemd-specific stuff have been found in
the eudev-3.2.6 release. Since there don't seem to be any improvements that
would merit closely following the bleeding edge on this one, we'll revert
back to eudev-3.2.5 which worked fine.
a/kernel-firmware-20181001_7c81f23-noarch-1.txz: Upgraded.
ap/at-3.1.23-x86_64-1.txz: Upgraded.
ap/hplip-3.18.9-x86_64-1.txz: Upgraded.
d/mercurial-4.7.2-x86_64-1.txz: Upgraded.
x/libpthread-stubs-0.4-x86_64-3.txz: Rebuilt.
Rebuilt since this should not be "noarch".
xap/mozilla-firefox-60.2.2esr-x86_64-1.txz: Upgraded.
This release contains security fixes and improvements.
For more information, see:
https://www.mozilla.org/security/known-vulnerabilities/firefoxESR.htmlhttps://www.mozilla.org/en-US/security/advisories/mfsa2018-24/https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-12387
(* Security fix *)
xap/mozilla-thunderbird-60.2.1-x86_64-1.txz: Upgraded.
This is a bugfix release. For more information, see:
https://www.mozilla.org/en-US/thunderbird/60.2.1/releasenotes/
xfce/Thunar-1.8.2-x86_64-1.txz: Upgraded.
a/eudev-3.2.6-x86_64-1.txz: Upgraded.
a/glibc-solibs-2.28-x86_64-2.txz: Upgraded.
a/grub-2.02-x86_64-3.txz: Rebuilt.
Patched to fix compatibility with recent xfsprogs. Thanks to Markus Wiesner.
a/kernel-generic-4.14.71-x86_64-1.txz: Upgraded.
a/kernel-huge-4.14.71-x86_64-1.txz: Upgraded.
a/kernel-modules-4.14.71-x86_64-1.txz: Upgraded.
ap/opus-tools-0.2-x86_64-1.txz: Upgraded.
ap/sqlite-3.25.1-x86_64-1.txz: Upgraded.
d/icecream-20180905_cdc6ff8-x86_64-1.txz: Upgraded.
d/kernel-headers-4.14.71-x86-1.txz: Upgraded.
d/llvm-7.0.0-x86_64-1.txz: Upgraded.
Shared library .so-version bump.
k/kernel-source-4.14.71-noarch-1.txz: Upgraded.
l/ffmpeg-3.4.4-x86_64-2.txz: Rebuilt.
Don't try to link with Samba since the latest version is not compatible.
l/glibc-2.28-x86_64-2.txz: Upgraded.
All packages have been patched where needed for glibc-2.28 and compile
tested here. Thanks to nobodino for the help.
l/glibc-i18n-2.28-x86_64-2.txz: Upgraded.
l/glibc-profile-2.28-x86_64-2.txz: Upgraded.
l/gst-plugins-base-1.14.3-x86_64-1.txz: Upgraded.
l/gst-plugins-good-1.14.3-x86_64-1.txz: Upgraded.
l/gst-plugins-libav-1.14.3-x86_64-1.txz: Upgraded.
l/gstreamer-1.14.3-x86_64-1.txz: Upgraded.
l/imagemagick-6.9.10_11-x86_64-1.txz: Upgraded.
l/libopusenc-0.2-x86_64-1.txz: Added.
l/librsvg-2.44.3-x86_64-1.txz: Upgraded.
l/opus-1.3_rc2-x86_64-1.txz: Upgraded.
l/opusfile-0.11-x86_64-1.txz: Upgraded.
l/soprano-2.9.4-x86_64-3.txz: Rebuilt.
Recompiled to drop virtuoso dependency.
l/virtuoso-ose-6.1.8-x86_64-9.txz: Removed.
Even KDE4 has migrated away from actually using this for anything. The last
thing in Slackware that was dependent on it was Soprano, which has been
recompiled to no longer use it.
n/postfix-3.3.1-x86_64-2.txz: Rebuilt.
Recompiled so that it quits whining about OpenSSL. Thanks to shastah.
x/mesa-18.2.1-x86_64-1.txz: Upgraded.
Compiled against llvm-7.0.0.
x/xf86-video-vmware-13.3.0-x86_64-2.txz: Rebuilt.
Recompiled against llvm-7.0.0.
x/xterm-336-x86_64-1.txz: Upgraded.
extra/pure-alsa-system/ffmpeg-3.4.4-x86_64-2_alsa.txz: Rebuilt.
Don't try to link with Samba since the latest version is not compatible.
extra/pure-alsa-system/gst-plugins-good-1.14.3-x86_64-1_alsa.txz: Upgraded.
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
ap/hplip-3.18.7-x86_64-3.txz: Rebuilt.
Throw away the broken and ill-advised libImageProcessor closed-source blob.
Thanks to Matteo Bernardini.
ap/zsh-5.6.2-x86_64-1.txz: Upgraded.
d/rust-1.29.0-x86_64-1.txz: Upgraded.
l/lmdb-0.9.22-x86_64-1.txz: Added.
This is a new dependency of Samba.
n/php-7.2.10-x86_64-1.txz: Upgraded.
This is a security release which also contains several minor bug fixes.
For more information, see:
https://php.net/ChangeLog-7.php#7.2.10
(* Security fix *)
n/samba-4.9.0-x86_64-1.txz: Upgraded.
x/xf86-video-amdgpu-18.1.0-x86_64-1.txz: Upgraded.
x/xf86-video-ati-18.1.0-x86_64-1.txz: Upgraded.
a/sysvinit-scripts-2.1-noarch-20.txz: Rebuilt.
rc.6: it was reported by birdboy that JFS is not properly unmounted unless
the order of unmounting local filesystems followed by remounting the root
filesystem read-only is inverted. I tried that, and although it did get rid
of a "/ filesystem is busy" error during shutdown, the JFS / filesystem was
still checked at boot (and found to be clean). I believe that the existing
order of unmounting non-root filesystems followed by remounting the root
filesystem as read-only is the correct order, and found that putting
another sync between these also gets rid of the error on shutdown, so I've
done that. When using JFS as the root filesystem there's still another
similar error message that's generated earlier in the boot, though. I'm
unable to find any way to shut down a JFS root partition in a way that
leaves it clean enough that fsck will not check it at boot, but it is always
found to be clean so this should only be cosmetic. I recall this behavior of
JFS going all the way back to when it was first added to the kernel. If
anyone has a better fix, I'll take a look at it, but in my opinion it's not
really anything to worry about.
ap/ghostscript-9.25-x86_64-1.txz: Upgraded.
This release fixes problems with argument handling, some unintended
results of the security fixes to the SAFER file access restrictions
(specifically accessing ICC profile files), and some additional
security issues over the recent 9.24 release.
For more information, see:
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-16509
(* Security fix *)
ap/squashfs-tools-20180612_6e242dc-x86_64-1.txz: Upgraded.
Linked against libzstd.so.1. Thanks to alienBOB.
ap/sudo-1.8.25p1-x86_64-1.txz: Upgraded.
d/binutils-2.31.1-x86_64-4.txz: Rebuilt.
Since baldzhang has pointed out a valid use case for windres on Linux,
we are restoring the "Windows only" utilities, as none of them are
very large and there may be valid uses for the other ones as well.
l/freetype-2.9.1-x86_64-2.txz: Rebuilt.
Patched to build properly if windres is present on the machine.
l/sg3_utils-1.44-x86_64-1.txz: Upgraded.
l/zstd-1.3.5-x86_64-1.txz: Added.
Thanks to alienBOB.
xfce/tumbler-0.2.3-x86_64-1.txz: Upgraded.
isolinux/initrd.img: Rebuilt.
Use the ter-114v terminus font. It has been reported that the font we were
using (ter-v14v) restricts the available console colors from 16 to 8 due
to needing an extra bit for the higher number of available glyphs (though
in testing here I couldn't see any difference). The new font covers
ISO8859-1, ISO8859-15, and Windows-1252 codepages. I'm still not sure it's
the best choice, so additional input is welcomed.
Thanks to bormant.
usb-and-pxe-installers/usbboot.img: Rebuilt.
Use the ter-114v terminus font.
Hey folks, my first order of business here needs to be a huge thank you to
everyone who has donated at https://paypal.me/volkerdi to help keep this
project going. As most of you are already aware by now, the financal situation
here at Slackware HQ has not been great for many years, including not getting
any pay for the last two years and forcing me (and my family) to live very
frugally while I continued to work on the project hoping I'd figure out a way
to actually monitize it by the time that Slackware 15.0 is ready for release.
I'm not trying to cast any blame regarding the situation. Really, I can only
blame myself for not trying to build my own ship years ago when things began
to not really work out. I'm still looking into sustainable funding options
such as Patreon or Liberapay (or perhaps both), and I'm open to other ideas.
I'm no longer in immediate danger of going broke, and I'm no longer
entertaining the notion of joining my friends at the local potato chip factory
in order to pay my bills. :) My family is grateful and humbled by the support
we've received. Hope we'll be able to keep this project going for a long time.
Also, I realize that the website lacks updates and needs attention and I will
need to find some time to devote to that. I've never been much of a website
designer, and the slackware.com site is basically left over from work done by
former Walnut Creek / BSDi employees. I've never seen able to make much sense
of the SQL backend. The interface to edit and post articles is clunky (and
I'm not sure the PHP for that even works any more). When I've posted articles
in recent years, I've done so by editing the main page already processed from
PHP into HTML, which is pretty darn messy as I'm sure you can imagine. I tend
to prioritize the distribution itself over other demands on my time - that's
clearly a lot to do with how things ended up the way they did.
So, I guess that's the report for now. Lots more work to do and not enough
time to do it in... that part I don't see changing moving forward. :)
Thanks very much again. I'll do my best to keep you all posted.
- Pat
a/file-5.34-x86_64-1.txz: Upgraded.
a/kernel-firmware-20180727_b01151b-noarch-1.txz: Upgraded.
a/kernel-generic-4.14.58-x86_64-1.txz: Upgraded.
a/kernel-huge-4.14.58-x86_64-1.txz: Upgraded.
a/kernel-modules-4.14.58-x86_64-1.txz: Upgraded.
d/gcc-8.2.0-x86_64-1.txz: Upgraded.
d/gcc-brig-8.2.0-x86_64-1.txz: Upgraded.
d/gcc-g++-8.2.0-x86_64-1.txz: Upgraded.
d/gcc-gfortran-8.2.0-x86_64-1.txz: Upgraded.
d/gcc-gnat-8.2.0-x86_64-1.txz: Upgraded.
d/gcc-go-8.2.0-x86_64-1.txz: Upgraded.
d/gcc-objc-8.2.0-x86_64-1.txz: Upgraded.
d/kernel-headers-4.14.58-x86-1.txz: Upgraded.
d/libtool-2.4.6-x86_64-9.txz: Rebuilt.
Recompiled to update embedded GCC version number.
k/kernel-source-4.14.58-noarch-1.txz: Upgraded.
CRASH_DUMP n -> y
KEXEC n -> y
+KEXEC_JUMP y
+PROC_VMCORE y
l/babl-0.1.54-x86_64-1.txz: Upgraded.
l/gegl-0.4.6-x86_64-1.txz: Upgraded.
l/libart_lgpl-2.3.21-x86_64-2.txz: Removed.
This actually hasn't been needed by any Slackware package since koffice in
KDE3, and this particular version won't work with the Trinity Desktop
Environment, which is essentially a fork of KDE 3.5 updated to compile and
run with modern libraries and development tools. I can't see much point in
keeping it around. Thanks to _gin.
n/NetworkManager-1.12.2-x86_64-1.txz: Upgraded.
n/dhcpcd-7.0.7-x86_64-1.txz: Upgraded.
x/libinput-1.11.3-x86_64-1.txz: Upgraded.
extra/tigervnc/tigervnc-1.9.0-x86_64-1.txz: Upgraded.
isolinux/initrd.img: Rebuilt.
kernels/*: Upgraded.
usb-and-pxe-installers/usbboot.img: Rebuilt.
a/pkgtools-15.0-noarch-13.txz: Rebuilt.
installpkg: default line length for --terselength is the number of columns.
removepkg: added --terse mode.
upgradepkg: default line length for --terselength is the number of columns.
upgradepkg: accept -option in addition to --option.
ap/vim-8.1.0026-x86_64-1.txz: Upgraded.
d/bison-3.0.5-x86_64-1.txz: Upgraded.
e/emacs-26.1-x86_64-1.txz: Upgraded.
kde/kopete-4.14.3-x86_64-8.txz: Rebuilt.
Recompiled against libidn-1.35.
n/conntrack-tools-1.4.5-x86_64-1.txz: Upgraded.
n/libnetfilter_conntrack-1.0.7-x86_64-1.txz: Upgraded.
n/libnftnl-1.1.0-x86_64-1.txz: Upgraded.
n/links-2.16-x86_64-2.txz: Rebuilt.
Rebuilt to enable X driver for -g mode.
n/lynx-2.8.9dev.19-x86_64-1.txz: Upgraded.
n/nftables-0.8.5-x86_64-1.txz: Upgraded.
n/p11-kit-0.23.11-x86_64-1.txz: Upgraded.
n/ulogd-2.0.7-x86_64-1.txz: Upgraded.
n/whois-5.3.1-x86_64-1.txz: Upgraded.
xap/network-manager-applet-1.8.12-x86_64-1.txz: Upgraded.
xap/vim-gvim-8.1.0026-x86_64-1.txz: Upgraded.
Thu Jun 30 20:26:57 UTC 2016
Slackware 14.2 x86_64 stable is released!
The long development cycle (the Linux community has lately been living in
"interesting times", as they say) is finally behind us, and we're proud to
announce the release of Slackware 14.2. The new release brings many updates
and modern tools, has switched from udev to eudev (no systemd), and adds
well over a hundred new packages to the system. Thanks to the team, the
upstream developers, the dedicated Slackware community, and everyone else
who pitched in to help make this release a reality.
The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a dual-sided
32-bit/64-bit x86/x86_64 DVD. Please consider supporting the Slackware
project by picking up a copy from store.slackware.com. We're taking
pre-orders now, and offer a discount if you sign up for a subscription.
Have fun! :-)
Mon Nov 4 17:08:47 UTC 2013
Slackware 14.1 x86_64 stable is released!
It's been another interesting release cycle here at Slackware bringing
new features like support for UEFI machines, updated compilers and
development tools, the switch from MySQL to MariaDB, and many more
improvements throughout the system. Thanks to the team, the upstream
developers, the dedicated Slackware community, and everyone else who
pitched in to help make this release a reality.
The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a
dual-sided
32-bit/64-bit x86/x86_64 DVD. Please consider supporting the Slackware
project by picking up a copy from store.slackware.com. We're taking
pre-orders now, and offer a discount if you sign up for a subscription.
Have fun! :-)
Wed Sep 26 01:10:42 UTC 2012
Slackware 14.0 x86_64 stable is released!
We're perfectionists here at Slackware, so this release has been a long
time a-brewing. But we think you'll agree that it was worth the wait.
Slackware 14.0 combines modern components, ease of use, and flexible
configuration... our "KISS" philosophy demands it.
The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a
dual-sided
32-bit/64-bit x86/x86_64 DVD. Please consider supporting the Slackware
project by picking up a copy from store.slackware.com. We're taking
pre-orders now, and offer a discount if you sign up for a subscription.
Thanks to everyone who helped make this happen. The Slackware team, the
upstream developers, and (of course) the awesome Slackware user
community.
Have fun! :-)
Mon Apr 25 13:37:00 UTC 2011
Slackware 13.37 x86_64 stable is released!
Thanks to everyone who pitched in on this release: the Slackware team,
the folks producing upstream code, and linuxquestions.org for providing
a great forum for collaboration and testing.
The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a
dual-sided
32-bit/64-bit x86/x86_64 DVD. Please consider supporting the Slackware
project by picking up a copy from store.slackware.com. We're taking
pre-orders now, and offer a discount if you sign up for a subscription.
As always, thanks to the Slackware community for testing, suggestions,
and feedback. :-)
Have fun!
Wed May 19 08:58:23 UTC 2010
Slackware 13.1 x86_64 stable is released!
Lots of thanks are due -- see the RELEASE_NOTES and the rest of the
ChangeLog for credits. The ISOs are on their way to replication,
a 6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We are taking pre-orders now at store.slackware.com, and offering
a discount if you sign up for a subscription. Consider picking up
a copy to help support the project. Thanks again to the Slackware
community for testing, contributing, and generally holding us to a
high level of quality. :-)
Enjoy!
Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable! Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits. The ISOs are off to the replicator. This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com. Please consider
picking up a copy to help support the project. Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy! -P.
