Tue Jul 23 18:54:25 UTC 2024

Hey folks, we got a new glibc and are beginning the process of baking the new
default compile flags into the toolchain, the graphics stack, and whatever else
happens along. Enjoy! :-)
a/aaa_glibc-solibs-2.40-x86_64-1.txz:  Upgraded.
a/libblockdev-3.1.1_1-x86_64-2.txz:  Rebuilt.
  Fix build against recent ext2fs.h. Thanks to shipujin.
a/xfsprogs-6.9.0-x86_64-1.txz:  Upgraded.
ap/rpm-4.19.1.1-x86_64-3.txz:  Rebuilt.
ap/slackpkg-15.0.10-noarch-4.txz:  Rebuilt.
  Prefer gpg1 again. Going with the modern gpg with more dependencies was
  a mistake in this case. (now we know why gnupg-1 is still around :-)
  Thanks to Petri Kaukasoina.
d/binutils-2.42-x86_64-3.txz:  Rebuilt.
d/cargo-vendor-filterer-0.5.14-x86_64-2.txz:  Rebuilt.
d/cbindgen-0.26.0-x86_64-2.txz:  Rebuilt.
d/ccache-4.10.2-x86_64-1.txz:  Upgraded.
d/cmake-3.30.1-x86_64-2.txz:  Rebuilt.
d/gcc-14.1.0-x86_64-2.txz:  Rebuilt.
d/gcc-g++-14.1.0-x86_64-2.txz:  Rebuilt.
d/gcc-gdc-14.1.0-x86_64-2.txz:  Rebuilt.
d/gcc-gfortran-14.1.0-x86_64-2.txz:  Rebuilt.
d/gcc-gm2-14.1.0-x86_64-2.txz:  Rebuilt.
d/gcc-gnat-14.1.0-x86_64-2.txz:  Rebuilt.
d/gcc-go-14.1.0-x86_64-2.txz:  Rebuilt.
d/gcc-objc-14.1.0-x86_64-2.txz:  Rebuilt.
d/libgccjit-14.1.0-x86_64-2.txz:  Rebuilt.
d/libtool-2.4.7-x86_64-8.txz:  Rebuilt.
d/parallel-20240722-noarch-1.txz:  Upgraded.
d/pkg-config-0.29.2-x86_64-5.txz:  Rebuilt.
d/python-setuptools-71.1.0-x86_64-1.txz:  Upgraded.
d/ruby-3.3.4-x86_64-2.txz:  Rebuilt.
d/rust-bindgen-0.69.4-x86_64-2.txz:  Rebuilt.
d/strace-6.10-x86_64-1.txz:  Upgraded.
d/subversion-1.14.3-x86_64-3.txz:  Rebuilt.
e/emacs-29.4-x86_64-2.txz:  Rebuilt.
l/PyQt-builder-1.16.4-x86_64-2.txz:  Rebuilt.
l/PyQt5-5.15.11-x86_64-1.txz:  Upgraded.
l/PyQt5_sip-12.15.0-x86_64-2.txz:  Rebuilt.
l/argon2-20190702-x86_64-6.txz:  Rebuilt.
l/ffmpeg-6.1.1-x86_64-5.txz:  Rebuilt.
l/glibc-2.40-x86_64-1.txz:  Upgraded.
  This update fixes security issues:
  nscd: Stack-based buffer overflow in netgroup cache.
  nscd: Null pointer crash after notfound response.
  nscd: netgroup cache may terminate daemon on memory allocation failure.
  nscd: netgroup cache assumes NSS callback uses in-buffer strings.
  These vulnerabilities were only present in the nscd binary.
  For more information, see:
    https://www.cve.org/CVERecord?id=CVE-2024-33599
    https://www.cve.org/CVERecord?id=CVE-2024-33600
    https://www.cve.org/CVERecord?id=CVE-2024-33601
    https://www.cve.org/CVERecord?id=CVE-2024-33602
  (* Security fix *)
l/glibc-i18n-2.40-x86_64-1.txz:  Upgraded.
l/glibc-profile-2.40-x86_64-1.txz:  Upgraded.
l/gst-plugins-good-1.24.5-x86_64-2.txz:  Rebuilt.
l/libcdio-paranoia-10.2+2.0.2-x86_64-1.txz:  Upgraded.
l/libclc-18.1.8-x86_64-3.txz:  Rebuilt.
l/libproxy-0.5.8-x86_64-1.txz:  Upgraded.
l/lz4-1.10.0-x86_64-1.txz:  Upgraded.
l/poppler-24.07.0-x86_64-2.txz:  Rebuilt.
l/python-importlib_metadata-8.1.0-x86_64-1.txz:  Upgraded.
l/python-sphinx-7.4.7-x86_64-1.txz:  Upgraded.
l/qt5-5.15.14_20240716_ae0c8451-x86_64-1.txz:  Upgraded.
l/qt5-webkit-5.212.0_alpha4-x86_64-13.txz:  Rebuilt.
l/qt6-6.7.2_20240610_3f005f1e-x86_64-3.txz:  Rebuilt.
l/sip-6.8.6-x86_64-2.txz:  Rebuilt.
l/spirv-llvm-translator-18.1.2-x86_64-2.txz:  Rebuilt.
l/v4l-utils-1.28.0-x86_64-1.txz:  Upgraded.
n/bind-9.18.28-x86_64-1.txz:  Upgraded.
  This update fixes security issues:
  Remove SIG(0) support from named as a countermeasure for CVE-2024-1975.
  qctx-zversion was not being cleared when it should have been leading to
  an assertion failure if it needed to be reused.
  An excessively large number of rrtypes per owner can slow down database query
  processing, so a limit has been placed on the number of rrtypes that can be
  stored per owner (node) in a cache or zone database. This is configured with
  the new "max-rrtypes-per-name" option, and defaults to 100.
  Excessively large rdatasets can slow down database query processing, so a
  limit has been placed on the number of records that can be stored per
  rdataset in a cache or zone database. This is configured with the new
  "max-records-per-type" option, and defaults to 100.
  Malicious DNS client that sends many queries over TCP but never reads
  responses can cause server to respond slowly or not respond at all for other
  clients.
  For more information, see:
    https://www.cve.org/CVERecord?id=CVE-2024-1975
    https://www.cve.org/CVERecord?id=CVE-2024-4076
    https://www.cve.org/CVERecord?id=CVE-2024-1737
    https://www.cve.org/CVERecord?id=CVE-2024-0760
  (* Security fix *)
n/fetchmail-6.4.39-x86_64-1.txz:  Upgraded.
n/obexftp-0.24.2-x86_64-13.txz:  Rebuilt.
n/pinentry-1.3.1-x86_64-2.txz:  Rebuilt.
n/wpa_supplicant-2.11-x86_64-1.txz:  Upgraded.
x/fcitx5-qt-5.1.6-x86_64-3.txz:  Rebuilt.
x/ibus-m17n-1.4.30-x86_64-1.txz:  Upgraded.
x/libdrm-2.4.122-x86_64-2.txz:  Rebuilt.
x/marisa-0.2.6-x86_64-10.txz:  Rebuilt.
x/mesa-24.1.4-x86_64-2.txz:  Rebuilt.
x/vulkan-sdk-1.3.275.0-x86_64-3.txz:  Rebuilt.
xap/audacious-4.4-x86_64-2.txz:  Rebuilt.
xap/audacious-plugins-4.4-x86_64-2.txz:  Rebuilt.
xap/mozilla-thunderbird-128.0.1esr-x86_64-1.txz:  Upgraded.
  This is a bugfix release.
  For more information, see:
    https://www.mozilla.org/en-US/thunderbird/128.0.1esr/releasenotes/
xap/xaos-4.3.2-x86_64-2.txz:  Rebuilt.
extra/emacs-regular-build/emacs-29.4-x86_64-2_regular.txz:  Rebuilt.

ChangeLog.rss

@@ -11,9 +11,128 @@
       <description>Tracking Slackware development in git.</description>
       <language>en-us</language>
       <id xmlns="http://www.w3.org/2005/Atom">urn:uuid:c964f45e-6732-11e8-bbe5-107b4450212f</id>
-      <pubDate>Fri, 19 Jul 2024 20:08:29 GMT</pubDate>
+      <pubDate>Tue, 23 Jul 2024 18:54:25 GMT</pubDate>
-      <lastBuildDate>Fri, 19 Jul 2024 20:42:04 GMT</lastBuildDate>
+      <lastBuildDate>Tue, 23 Jul 2024 20:49:55 GMT</lastBuildDate>
       <generator>maintain_current_git.sh v 1.17</generator>
+      <item>
+         <title>Tue, 23 Jul 2024 18:54:25 GMT</title>
+         <pubDate>Tue, 23 Jul 2024 18:54:25 GMT</pubDate>
+         <link>https://git.slackware.nl/current/tag/?h=20240723185425</link>
+         <guid isPermaLink="false">20240723185425</guid>
+         <description>
+           <![CDATA[<pre>
+Hey folks, we got a new glibc and are beginning the process of baking the new
+default compile flags into the toolchain, the graphics stack, and whatever else
+happens along. Enjoy! :-)
+a/aaa_glibc-solibs-2.40-x86_64-1.txz:  Upgraded.
+a/libblockdev-3.1.1_1-x86_64-2.txz:  Rebuilt.
+  Fix build against recent ext2fs.h. Thanks to shipujin.
+a/xfsprogs-6.9.0-x86_64-1.txz:  Upgraded.
+ap/rpm-4.19.1.1-x86_64-3.txz:  Rebuilt.
+ap/slackpkg-15.0.10-noarch-4.txz:  Rebuilt.
+  Prefer gpg1 again. Going with the modern gpg with more dependencies was
+  a mistake in this case. (now we know why gnupg-1 is still around :-)
+  Thanks to Petri Kaukasoina.
+d/binutils-2.42-x86_64-3.txz:  Rebuilt.
+d/cargo-vendor-filterer-0.5.14-x86_64-2.txz:  Rebuilt.
+d/cbindgen-0.26.0-x86_64-2.txz:  Rebuilt.
+d/ccache-4.10.2-x86_64-1.txz:  Upgraded.
+d/cmake-3.30.1-x86_64-2.txz:  Rebuilt.
+d/gcc-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-g++-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-gdc-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-gfortran-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-gm2-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-gnat-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-go-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-objc-14.1.0-x86_64-2.txz:  Rebuilt.
+d/libgccjit-14.1.0-x86_64-2.txz:  Rebuilt.
+d/libtool-2.4.7-x86_64-8.txz:  Rebuilt.
+d/parallel-20240722-noarch-1.txz:  Upgraded.
+d/pkg-config-0.29.2-x86_64-5.txz:  Rebuilt.
+d/python-setuptools-71.1.0-x86_64-1.txz:  Upgraded.
+d/ruby-3.3.4-x86_64-2.txz:  Rebuilt.
+d/rust-bindgen-0.69.4-x86_64-2.txz:  Rebuilt.
+d/strace-6.10-x86_64-1.txz:  Upgraded.
+d/subversion-1.14.3-x86_64-3.txz:  Rebuilt.
+e/emacs-29.4-x86_64-2.txz:  Rebuilt.
+l/PyQt-builder-1.16.4-x86_64-2.txz:  Rebuilt.
+l/PyQt5-5.15.11-x86_64-1.txz:  Upgraded.
+l/PyQt5_sip-12.15.0-x86_64-2.txz:  Rebuilt.
+l/argon2-20190702-x86_64-6.txz:  Rebuilt.
+l/ffmpeg-6.1.1-x86_64-5.txz:  Rebuilt.
+l/glibc-2.40-x86_64-1.txz:  Upgraded.
+  This update fixes security issues:
+  nscd: Stack-based buffer overflow in netgroup cache.
+  nscd: Null pointer crash after notfound response.
+  nscd: netgroup cache may terminate daemon on memory allocation failure.
+  nscd: netgroup cache assumes NSS callback uses in-buffer strings.
+  These vulnerabilities were only present in the nscd binary.
+  For more information, see:
+    https://www.cve.org/CVERecord?id=CVE-2024-33599
+    https://www.cve.org/CVERecord?id=CVE-2024-33600
+    https://www.cve.org/CVERecord?id=CVE-2024-33601
+    https://www.cve.org/CVERecord?id=CVE-2024-33602
+  (* Security fix *)
+l/glibc-i18n-2.40-x86_64-1.txz:  Upgraded.
+l/glibc-profile-2.40-x86_64-1.txz:  Upgraded.
+l/gst-plugins-good-1.24.5-x86_64-2.txz:  Rebuilt.
+l/libcdio-paranoia-10.2+2.0.2-x86_64-1.txz:  Upgraded.
+l/libclc-18.1.8-x86_64-3.txz:  Rebuilt.
+l/libproxy-0.5.8-x86_64-1.txz:  Upgraded.
+l/lz4-1.10.0-x86_64-1.txz:  Upgraded.
+l/poppler-24.07.0-x86_64-2.txz:  Rebuilt.
+l/python-importlib_metadata-8.1.0-x86_64-1.txz:  Upgraded.
+l/python-sphinx-7.4.7-x86_64-1.txz:  Upgraded.
+l/qt5-5.15.14_20240716_ae0c8451-x86_64-1.txz:  Upgraded.
+l/qt5-webkit-5.212.0_alpha4-x86_64-13.txz:  Rebuilt.
+l/qt6-6.7.2_20240610_3f005f1e-x86_64-3.txz:  Rebuilt.
+l/sip-6.8.6-x86_64-2.txz:  Rebuilt.
+l/spirv-llvm-translator-18.1.2-x86_64-2.txz:  Rebuilt.
+l/v4l-utils-1.28.0-x86_64-1.txz:  Upgraded.
+n/bind-9.18.28-x86_64-1.txz:  Upgraded.
+  This update fixes security issues:
+  Remove SIG(0) support from named as a countermeasure for CVE-2024-1975.
+  qctx-zversion was not being cleared when it should have been leading to
+  an assertion failure if it needed to be reused.
+  An excessively large number of rrtypes per owner can slow down database query
+  processing, so a limit has been placed on the number of rrtypes that can be
+  stored per owner (node) in a cache or zone database. This is configured with
+  the new "max-rrtypes-per-name" option, and defaults to 100.
+  Excessively large rdatasets can slow down database query processing, so a
+  limit has been placed on the number of records that can be stored per
+  rdataset in a cache or zone database. This is configured with the new
+  "max-records-per-type" option, and defaults to 100.
+  Malicious DNS client that sends many queries over TCP but never reads
+  responses can cause server to respond slowly or not respond at all for other
+  clients.
+  For more information, see:
+    https://www.cve.org/CVERecord?id=CVE-2024-1975
+    https://www.cve.org/CVERecord?id=CVE-2024-4076
+    https://www.cve.org/CVERecord?id=CVE-2024-1737
+    https://www.cve.org/CVERecord?id=CVE-2024-0760
+  (* Security fix *)
+n/fetchmail-6.4.39-x86_64-1.txz:  Upgraded.
+n/obexftp-0.24.2-x86_64-13.txz:  Rebuilt.
+n/pinentry-1.3.1-x86_64-2.txz:  Rebuilt.
+n/wpa_supplicant-2.11-x86_64-1.txz:  Upgraded.
+x/fcitx5-qt-5.1.6-x86_64-3.txz:  Rebuilt.
+x/ibus-m17n-1.4.30-x86_64-1.txz:  Upgraded.
+x/libdrm-2.4.122-x86_64-2.txz:  Rebuilt.
+x/marisa-0.2.6-x86_64-10.txz:  Rebuilt.
+x/mesa-24.1.4-x86_64-2.txz:  Rebuilt.
+x/vulkan-sdk-1.3.275.0-x86_64-3.txz:  Rebuilt.
+xap/audacious-4.4-x86_64-2.txz:  Rebuilt.
+xap/audacious-plugins-4.4-x86_64-2.txz:  Rebuilt.
+xap/mozilla-thunderbird-128.0.1esr-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+  For more information, see:
+    https://www.mozilla.org/en-US/thunderbird/128.0.1esr/releasenotes/
+xap/xaos-4.3.2-x86_64-2.txz:  Rebuilt.
+extra/emacs-regular-build/emacs-29.4-x86_64-2_regular.txz:  Rebuilt.
+           </pre>]]>
+         </description>
+      </item>
       <item>
          <title>Fri, 19 Jul 2024 20:08:29 GMT</title>
          <pubDate>Fri, 19 Jul 2024 20:08:29 GMT</pubDate>

ChangeLog.txt

@@ -1,3 +1,114 @@
+Tue Jul 23 18:54:25 UTC 2024
+Hey folks, we got a new glibc and are beginning the process of baking the new
+default compile flags into the toolchain, the graphics stack, and whatever else
+happens along. Enjoy! :-)
+a/aaa_glibc-solibs-2.40-x86_64-1.txz:  Upgraded.
+a/libblockdev-3.1.1_1-x86_64-2.txz:  Rebuilt.
+  Fix build against recent ext2fs.h. Thanks to shipujin.
+a/xfsprogs-6.9.0-x86_64-1.txz:  Upgraded.
+ap/rpm-4.19.1.1-x86_64-3.txz:  Rebuilt.
+ap/slackpkg-15.0.10-noarch-4.txz:  Rebuilt.
+  Prefer gpg1 again. Going with the modern gpg with more dependencies was
+  a mistake in this case. (now we know why gnupg-1 is still around :-)
+  Thanks to Petri Kaukasoina.
+d/binutils-2.42-x86_64-3.txz:  Rebuilt.
+d/cargo-vendor-filterer-0.5.14-x86_64-2.txz:  Rebuilt.
+d/cbindgen-0.26.0-x86_64-2.txz:  Rebuilt.
+d/ccache-4.10.2-x86_64-1.txz:  Upgraded.
+d/cmake-3.30.1-x86_64-2.txz:  Rebuilt.
+d/gcc-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-g++-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-gdc-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-gfortran-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-gm2-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-gnat-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-go-14.1.0-x86_64-2.txz:  Rebuilt.
+d/gcc-objc-14.1.0-x86_64-2.txz:  Rebuilt.
+d/libgccjit-14.1.0-x86_64-2.txz:  Rebuilt.
+d/libtool-2.4.7-x86_64-8.txz:  Rebuilt.
+d/parallel-20240722-noarch-1.txz:  Upgraded.
+d/pkg-config-0.29.2-x86_64-5.txz:  Rebuilt.
+d/python-setuptools-71.1.0-x86_64-1.txz:  Upgraded.
+d/ruby-3.3.4-x86_64-2.txz:  Rebuilt.
+d/rust-bindgen-0.69.4-x86_64-2.txz:  Rebuilt.
+d/strace-6.10-x86_64-1.txz:  Upgraded.
+d/subversion-1.14.3-x86_64-3.txz:  Rebuilt.
+e/emacs-29.4-x86_64-2.txz:  Rebuilt.
+l/PyQt-builder-1.16.4-x86_64-2.txz:  Rebuilt.
+l/PyQt5-5.15.11-x86_64-1.txz:  Upgraded.
+l/PyQt5_sip-12.15.0-x86_64-2.txz:  Rebuilt.
+l/argon2-20190702-x86_64-6.txz:  Rebuilt.
+l/ffmpeg-6.1.1-x86_64-5.txz:  Rebuilt.
+l/glibc-2.40-x86_64-1.txz:  Upgraded.
+  This update fixes security issues:
+  nscd: Stack-based buffer overflow in netgroup cache.
+  nscd: Null pointer crash after notfound response.
+  nscd: netgroup cache may terminate daemon on memory allocation failure.
+  nscd: netgroup cache assumes NSS callback uses in-buffer strings.
+  These vulnerabilities were only present in the nscd binary.
+  For more information, see:
+    https://www.cve.org/CVERecord?id=CVE-2024-33599
+    https://www.cve.org/CVERecord?id=CVE-2024-33600
+    https://www.cve.org/CVERecord?id=CVE-2024-33601
+    https://www.cve.org/CVERecord?id=CVE-2024-33602
+  (* Security fix *)
+l/glibc-i18n-2.40-x86_64-1.txz:  Upgraded.
+l/glibc-profile-2.40-x86_64-1.txz:  Upgraded.
+l/gst-plugins-good-1.24.5-x86_64-2.txz:  Rebuilt.
+l/libcdio-paranoia-10.2+2.0.2-x86_64-1.txz:  Upgraded.
+l/libclc-18.1.8-x86_64-3.txz:  Rebuilt.
+l/libproxy-0.5.8-x86_64-1.txz:  Upgraded.
+l/lz4-1.10.0-x86_64-1.txz:  Upgraded.
+l/poppler-24.07.0-x86_64-2.txz:  Rebuilt.
+l/python-importlib_metadata-8.1.0-x86_64-1.txz:  Upgraded.
+l/python-sphinx-7.4.7-x86_64-1.txz:  Upgraded.
+l/qt5-5.15.14_20240716_ae0c8451-x86_64-1.txz:  Upgraded.
+l/qt5-webkit-5.212.0_alpha4-x86_64-13.txz:  Rebuilt.
+l/qt6-6.7.2_20240610_3f005f1e-x86_64-3.txz:  Rebuilt.
+l/sip-6.8.6-x86_64-2.txz:  Rebuilt.
+l/spirv-llvm-translator-18.1.2-x86_64-2.txz:  Rebuilt.
+l/v4l-utils-1.28.0-x86_64-1.txz:  Upgraded.
+n/bind-9.18.28-x86_64-1.txz:  Upgraded.
+  This update fixes security issues:
+  Remove SIG(0) support from named as a countermeasure for CVE-2024-1975.
+  qctx-zversion was not being cleared when it should have been leading to
+  an assertion failure if it needed to be reused.
+  An excessively large number of rrtypes per owner can slow down database query
+  processing, so a limit has been placed on the number of rrtypes that can be
+  stored per owner (node) in a cache or zone database. This is configured with
+  the new "max-rrtypes-per-name" option, and defaults to 100.
+  Excessively large rdatasets can slow down database query processing, so a
+  limit has been placed on the number of records that can be stored per
+  rdataset in a cache or zone database. This is configured with the new
+  "max-records-per-type" option, and defaults to 100.
+  Malicious DNS client that sends many queries over TCP but never reads
+  responses can cause server to respond slowly or not respond at all for other
+  clients.
+  For more information, see:
+    https://www.cve.org/CVERecord?id=CVE-2024-1975
+    https://www.cve.org/CVERecord?id=CVE-2024-4076
+    https://www.cve.org/CVERecord?id=CVE-2024-1737
+    https://www.cve.org/CVERecord?id=CVE-2024-0760
+  (* Security fix *)
+n/fetchmail-6.4.39-x86_64-1.txz:  Upgraded.
+n/obexftp-0.24.2-x86_64-13.txz:  Rebuilt.
+n/pinentry-1.3.1-x86_64-2.txz:  Rebuilt.
+n/wpa_supplicant-2.11-x86_64-1.txz:  Upgraded.
+x/fcitx5-qt-5.1.6-x86_64-3.txz:  Rebuilt.
+x/ibus-m17n-1.4.30-x86_64-1.txz:  Upgraded.
+x/libdrm-2.4.122-x86_64-2.txz:  Rebuilt.
+x/marisa-0.2.6-x86_64-10.txz:  Rebuilt.
+x/mesa-24.1.4-x86_64-2.txz:  Rebuilt.
+x/vulkan-sdk-1.3.275.0-x86_64-3.txz:  Rebuilt.
+xap/audacious-4.4-x86_64-2.txz:  Rebuilt.
+xap/audacious-plugins-4.4-x86_64-2.txz:  Rebuilt.
+xap/mozilla-thunderbird-128.0.1esr-x86_64-1.txz:  Upgraded.
+  This is a bugfix release.
+  For more information, see:
+    https://www.mozilla.org/en-US/thunderbird/128.0.1esr/releasenotes/
+xap/xaos-4.3.2-x86_64-2.txz:  Rebuilt.
+extra/emacs-regular-build/emacs-29.4-x86_64-2_regular.txz:  Rebuilt.
++--------------------------+
 Fri Jul 19 20:08:29 UTC 2024
 a/aaa_libraries-15.1-x86_64-32.txz:  Rebuilt.
   Added: libgpg-error.so.0.37.0.

recompress.sh

@@ -493,7 +493,6 @@ gzip ./source/n/nc/nc.diff
 gzip ./source/n/wpa_supplicant/patches/wpa_supplicant-quiet-scan-results-message.patch
 gzip ./source/n/wpa_supplicant/patches/wpa_supplicant-gui-qt4.patch
 gzip ./source/n/wpa_supplicant/patches/allow-tlsv1.patch
-gzip ./source/n/wpa_supplicant/patches/8e6485a1bcb0baffdea9e55255a81270b768439c.patch
 gzip ./source/n/wpa_supplicant/doinst.sh
 gzip ./source/n/php/php-fpm.conf.diff
 gzip ./source/n/php/doinst.sh
@@ -645,7 +644,6 @@ gzip ./source/t/xfig/xfig.fig.ad.diff
 gzip ./source/l/glibc/glibc.ru_RU.CP1251.diff
 gzip ./source/l/glibc/glibc.locale.no-archive.diff
 gzip ./source/l/glibc/patches/reenable_DT_HASH.patch
-gzip ./source/l/glibc/patches/CVE-2024-2961_glibc2.39.patch
 gzip ./source/l/glibc/glibc-2.32.en_US.no.am.pm.date.format.diff
 gzip ./source/l/fuse/fuse2-0007-util-ulockmgr_server.c-conditionally-define-closefro.patch
 gzip ./source/l/fuse/doinst.sh
@@ -757,6 +755,7 @@ gzip ./source/l/gdk-pixbuf2/doinst.sh
 gzip ./source/l/qt5-webkit/webkit-offlineasm-warnings-ruby27.patch
 gzip ./source/l/qt5-webkit/qt5-webkit.glib-2.68.0.diff
 gzip ./source/l/qt5-webkit/icu68.patch
+gzip ./source/l/qt5-webkit/qtwebkit-fix-build-gcc14.patch
 gzip ./source/l/qt5-webkit/qt5-webkit-bison-3.7.patch
 gzip ./source/l/qt5-webkit/qt5-webkit-python-3.9.patch
 gzip ./source/l/qt5-webkit/qt5-webkit.gcc13.diff

source/a/libblockdev/libblockdev.SlackBuild

@@ -25,12 +25,12 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libblockdev
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | rev | cut -f 2- -d -)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -52,13 +52,13 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
@@ -86,6 +86,10 @@ find . \
   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
   -exec chmod 644 {} \+
 
+# Don't use -Werror. It fails the build with recent libext2fs.
+find -name Makefile.am -exec sed -i "s/-Werror//" {} \;
+find -name Makefile.in -exec sed -i "s/-Werror//" {} \;
+
 # Configure, build, and install:
 if [ ! -r configure ]; then
   if [ -x ./autogen.sh ]; then

source/a/xfsprogs/xfsprogs.SlackBuild

@@ -31,7 +31,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -49,14 +49,14 @@ fi
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-xfsprogs
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/ap/rpm/rpm.SlackBuild

@@ -26,14 +26,14 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=rpm
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -52,10 +52,10 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "arm" ]; then
   SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"

source/ap/slackpkg/files/core-functions.sh

@@ -31,6 +31,17 @@ One or more errors occurred while slackpkg was running:
 }
 trap 'cleanup' 2 14 15 		# trap CTRL+C and kill
 
+# Define which version of gnupg to use. We'll prefer gpg1 since it has fewer
+# dependencies, then gpg2, and if we don't find that we'll blindly set this
+# to gpg and deal with it later.
+if which gpg1 > /dev/null 2> /dev/null ; then
+  GPG=gpg1
+elif which gpg2 > /dev/null 2> /dev/null ; then
+  GPG=gpg2
+else
+  GPG=gpg
+fi
+
 # This create an spinning bar
 spinning() {
 	local WAITFILE
@@ -371,7 +382,7 @@ as slackpkg cannot function without awk.\n"
 
 	# Check if gpg is enabled but no GPG command are found.
 	#
-	if ! [ "$(which gpg2 2>/dev/null)" ] && [ "${CHECKGPG}" = "on" ]; then
+	if ! [ "$(which $GPG 2>/dev/null)" ] && [ "${CHECKGPG}" = "on" ]; then
 		CHECKGPG=off
 		echo -e "\n\
 gpg package not found!  Please disable GPG in ${CONF}/slackpkg.conf or install\n\
@@ -384,7 +395,7 @@ file distributed with slackpkg.\n"
 
 	# Check if the Slackware GPG key are found in the system
 	#                                                       
-	GPGFIRSTTIME="$(gpg2 --list-keys \"$SLACKKEY\" 2>/dev/null \
+	GPGFIRSTTIME="$($GPG --list-keys \"$SLACKKEY\" 2>/dev/null \
 			| grep -c "$SLACKKEY")"
 	if [ "$GPGFIRSTTIME" = "0" ] && \
 		[ "$CMD" != "search" ] && \
@@ -546,7 +557,7 @@ function checkmd5() {
 # Verify the GPG signature of files/packages
 #
 function checkgpg() {
-	gpg2 --verify ${1}.asc ${1} 2>/dev/null && echo "1" || echo "0"
+	$GPG --verify ${1}.asc ${1} 2>/dev/null && echo "1" || echo "0"
 }
 
 # Fetch $SLACKKEY from a trusted source
@@ -585,8 +596,8 @@ Do you want to import the GPG key from this source? (YES|NO)\n"
 # Import $SLACKKEY
 function import_gpg_key() {
 	mkdir -p ~/.gnupg
-	gpg2 --yes --batch --delete-key "$SLACKKEY" &>/dev/null
+	$GPG --yes --batch --delete-key "$SLACKKEY" &>/dev/null
-	gpg2 --import $TMPDIR/gpgkey &>/dev/null && \
+	$GPG --import $TMPDIR/gpgkey &>/dev/null && \
 	echo -e "\t\t\tSlackware Linux Project's GPG key added"
 }
 

source/ap/slackpkg/slackpkg.SlackBuild

@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=slackpkg
 VERSION=${VERSION:-15.0.10}
 ARCH="noarch"
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-4}
 
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
 # the name of the created package would be, and then exit. This information

source/d/binutils/binutils.SlackBuild

@@ -26,13 +26,13 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=binutils
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
   case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
+    i?86)    export ARCH=i686 ;;
     armv7hl) export ARCH=$MARCH ;;
     arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
@@ -59,7 +59,7 @@ if [ "$ARCH" = "i586" ]; then
   WERROR="--enable-werror=no"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   # The config option below is currently needed to compile on x86:
   WERROR="--enable-werror=no"
   LIBDIRSUFFIX=""
@@ -67,7 +67,7 @@ elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"

source/d/cargo-vendor-filterer/cargo-vendor-filterer.SlackBuild

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2022  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2022, 2024  Patrick J. Volkerding, Sebeka, MN, USA
 # Copyright 2022  Heinz Wiesinger, Amsterdam, The Netherlands
 # All rights reserved.
 #
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=cargo-vendor-filterer
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -48,17 +48,14 @@ fi
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"

source/d/cbindgen/cbindgen.SlackBuild

@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=cbindgen
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -48,17 +48,14 @@ fi
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"

source/d/ccache/ccache.SlackBuild

@@ -29,13 +29,30 @@ BUILD=${BUILD:-1}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
   esac
 fi
 
+if [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
 # the name of the created package would be, and then exit. This information
 # could be useful to other scripts.

source/d/cmake/cmake.SlackBuild

@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=cmake
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -49,12 +49,11 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -m32 -march=i586 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2 -fcf-protection=none"
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
 else
   SLKCFLAGS="-O2"
 fi

source/d/distcc/distcc.SlackBuild

@@ -110,7 +110,6 @@ mkdir -p $PKG//usr/lib/distcc
   ln -sf ../../bin/distcc gcc-$GCCVER
   ln -sf ../../bin/distcc $ARCH-slackware-linux-g++
   ln -sf ../../bin/distcc $ARCH-slackware-linux-gcc
-  ln -sf ../../bin/distcc $ARCH-slackware-linux-gcc-$GCCVER
 )
 
 # If needed, make a symlink from /usr/lib${LIBDIRSUFFIX}/distcc -> /usr/lib/distcc:

source/d/gcc/gcc.SlackBuild

@@ -57,7 +57,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=gcc
 SRCVER=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 VERSION=$(echo $SRCVER | cut -f 1 -d _)
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # How many jobs to run in parallel:
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
@@ -65,7 +65,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -101,7 +101,7 @@ elif [ "$ARCH" = "i586" ]; then
   LIBDIRSUFFIX=""
   LIB_ARCH=i386
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
   LIB_ARCH=i386
 elif [ "$ARCH" = "s390" ]; then
@@ -109,7 +109,7 @@ elif [ "$ARCH" = "s390" ]; then
   LIBDIRSUFFIX=""
   LIB_ARCH=s390
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
   LIB_ARCH=amd64
 elif [ "$ARCH" = "armv7hl" ]; then
@@ -522,6 +522,10 @@ rm -f $PKG1/{,usr/}lib${LIBDIRSUFFIX}/*.la
   mv $PKG1/usr/share/gdb usr/share
   mkdir -p usr/share/gcc-$VERSION/python
   mv $PKG1/usr/share/gcc-$VERSION/python/libstdcxx usr/share/gcc-$VERSION/python
+  if [ -d $PKG2/usr/include/c++/$VERSION/i686-slackware-linux -a ! -e $PKG2/usr/include/c++/$VERSION/i586-slackware-linux ]; then
+    # This symlink will ease the headaches associated with changing our target:
+    ln -sf i686-slackware-linux $PKG2/usr/include/c++/$VERSION/i586-slackware-linux
+  fi
 )
 
 # gcc-gfortran:

source/d/gcc/libgccjit.SlackBuild

@@ -34,7 +34,7 @@ PKGNAM=libgccjit
 SRCNAM=gcc
 SRCVER=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 VERSION=$(echo $SRCVER | cut -f 1 -d _)
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # How many jobs to run in parallel:
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
@@ -42,7 +42,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -71,7 +71,7 @@ elif [ "$ARCH" = "i586" ]; then
   LIBDIRSUFFIX=""
   LIB_ARCH=i386
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
   LIB_ARCH=i386
 elif [ "$ARCH" = "s390" ]; then
@@ -79,7 +79,7 @@ elif [ "$ARCH" = "s390" ]; then
   LIBDIRSUFFIX=""
   LIB_ARCH=s390
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
   LIB_ARCH=amd64
 elif [ "$ARCH" = "armv7hl" ]; then

source/d/libtool/libtool.SlackBuild

@@ -24,14 +24,14 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libtool
 VERSION=${VERSION:-$(echo libtool-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-7}
+BUILD=${BUILD:-8}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -53,10 +53,10 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/d/llvm/libclc.SlackBuild

@@ -27,7 +27,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libclc
 VERSION=${VERSION:-$(echo llvmorg-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
@@ -35,7 +35,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
   case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
+    i?86)    export ARCH=i686 ;;
     armv7hl) export ARCH=$MARCH ;;
     arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
@@ -54,11 +54,14 @@ fi
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"

source/d/parallel/parallel.SlackBuild

@@ -29,7 +29,7 @@ BUILD=${BUILD:-1}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -43,13 +43,13 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"

source/d/pkg-config/pkg-config.SlackBuild

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2008, 2009, 2010, 2017, 2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2017, 2018, 2024  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,12 +24,12 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=pkg-config
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-4}
+BUILD=${BUILD:-5}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -54,11 +54,14 @@ mkdir -p $TMP $PKG/usr
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "arm" ]; then
   SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"

source/d/python-setuptools/python-setuptools.SlackBuild

@@ -31,7 +31,7 @@ SRCNAM=setuptools
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) ARCH=arm ;;
        *) ARCH=$( uname -m ) ;;
   esac

source/d/ruby/ruby.SlackBuild

@@ -32,12 +32,12 @@ else
   VERSION=$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
 fi
 
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -57,22 +57,17 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-ruby
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  # -O3 works around a compile failure due to a miniruby segfault
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  # when trying to build ruby with gcc-4.4 or newer.  Evidently
+  OPTFLAGS=-O2
-  # -O0 also works, but...
-  # other distributions also use -fno-strict-aliasing which helps stability
-  SLKCFLAGS="-march=i586 -mtune=i686 -O3 -fno-strict-aliasing"
-  OPTFLAGS=-O3
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
-  # Unknown if s390 also needs -O3.  Check to see if it compiles with -O2.
+  SLKCFLAGS="-O2"
-  SLKCFLAGS="-O3 -fno-strict-aliasing"
+  OPTFLAGS=-O2
-  OPTFLAGS=-O3
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O3 -fPIC -fno-strict-aliasing"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
-  OPTFLAGS=-O3
+  OPTFLAGS=-O2
   LIBDIRSUFFIX="64"
 fi
 

source/d/rust-bindgen/rust-bindgen.SlackBuild

@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=rust-bindgen
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -48,17 +48,14 @@ fi
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"

source/d/strace/strace.SlackBuild

@@ -29,7 +29,7 @@ BUILD=${BUILD:-1}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -46,12 +46,12 @@ fi
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
 else
   SLKCFLAGS="-O2"
 fi

source/d/strace/strace.url

@@ -1,2 +1,2 @@
 https://github.com/strace/strace
-https://github.com/strace/strace/releases/download/v6.9/strace-6.9.tar.xz
+https://github.com/strace/strace/releases/download/v6.10/strace-6.10.tar.xz

source/d/subversion/subversion.SlackBuild

@@ -24,12 +24,12 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=subversion
 VERSION=${VERSION:-$(echo subversion-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -46,14 +46,14 @@ fi
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/e/emacs/emacs.SlackBuild

@@ -28,7 +28,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=${PKGNAM:-emacs}
 SRCNAM=emacs
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 # Determine version number the tarball is labeled with:
 TARBALLVER=${TARBALLVER:-$(echo $SRCNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 # OK, now what's being used as the source directory version number...  account
@@ -70,7 +70,7 @@ fi
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -89,11 +89,11 @@ fi
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
 else

source/kde/kde/kde.options

@@ -6,7 +6,7 @@
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -24,11 +24,14 @@ if [ -z "$SLKCFLAGS" ]; then
   elif [ "$ARCH" = "i586" ]; then
     export SLKCFLAGS="-O2 -march=i586 -mtune=i686"
     export LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "i686" ]; then
+    export SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+    export LIBDIRSUFFIX=""
   elif [ "$ARCH" = "s390" ]; then
     export SLKCFLAGS="-O2"
     export LIBDIRSUFFIX=""
   elif [ "$ARCH" = "x86_64" ]; then
-    export SLKCFLAGS="-O2 -fPIC"
+    export SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
     export LIBDIRSUFFIX="64"
   elif [ "$ARCH" = "arm" ]; then
     export SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"

source/l/PyQt-builder/PyQt-builder.SlackBuild

@@ -25,14 +25,14 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=PyQt-builder
 SRCNAM=pyqt_builder
 VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -51,9 +51,9 @@ fi
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
 else

source/l/PyQt5/PyQt5.SlackBuild

@@ -28,12 +28,12 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=PyQt5
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -41,17 +41,14 @@ if [ -z "$ARCH" ]; then
   export ARCH
 fi
 
-if [ "$ARCH" = "i486" ]; then
+if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"

source/l/PyQt5_sip/PyQt5_sip.SlackBuild

@@ -29,14 +29,14 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=PyQt5_sip
 SRCNAM=PyQt5_sip
 VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -55,9 +55,9 @@ fi
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
 else

source/l/argon2/argon2.SlackBuild

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2019, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2019, 2020, 2024  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,12 +24,12 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=argon2
 VERSION=${VERSION:-$(echo *.tar.?z | cut -f 1 -d .)}
-BUILD=${BUILD:-5}
+BUILD=${BUILD:-6}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -49,16 +49,16 @@ fi
 #NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686 -msse3"
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -msse3"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"

source/l/ffmpeg/ffmpeg.SlackBuild

@@ -30,11 +30,11 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=ffmpeg
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-4}
+BUILD=${BUILD:-5}
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) ARCH=arm ;;
        *) ARCH=$( uname -m ) ;;
   esac
@@ -45,14 +45,11 @@ PKG=$TMP/package-$PKGNAM
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686 -fPIC"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic -fPIC"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -fPIC"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/l/glibc/glibc.SlackBuild

@@ -25,16 +25,15 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=glibc
 VERSION=${VERSION:-$(echo glibc-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 CHECKOUT=${CHECKOUT:-""}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # I was considering disabling NSCD, but MoZes talked me out of it.  :)
 #DISABLE_NSCD=" --disable-nscd "
 
-# $ARCH may be preset, otherwise i586 compatibility with i686 binary
+# $ARCH may be preset, otherwise i686 (pentium4) is the Slackware default.
-# structuring is the Slackware default.
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -80,7 +79,7 @@ case $ARCH  in
     LIBDIRSUFFIX=""
     ;;
   i686)
-    OPTIMIZ="-O3 -march=i686"
+    OPTIMIZ="-O3 -march=pentium4 -mtune=generic"
     LIBDIRSUFFIX=""
     ;;
   athlon)
@@ -92,7 +91,7 @@ case $ARCH  in
     LIBDIRSUFFIX=""
     ;;
   x86_64)
-    OPTIMIZ="-O3 -fPIC"
+    OPTIMIZ="-O3 -march=x86-64 -mtune=generic -fPIC"
     LIBDIRSUFFIX="64"
     ;;
   *)
@@ -105,9 +104,9 @@ case $ARCH in
   x86_64)
     TARGET=${TARGET:-x86_64}
     ;;
-  i586)
+  i686)
-    # This should be i586 for all 32-bit x86 arch:
+    # This should be i686 for all 32-bit x86 arch:
-    TARGET=${TARGET:-i586}
+    TARGET=${TARGET:-i686}
     ;;
 esac
 

source/l/glibc/patches/CVE-2024-2961_glibc2.39.patch

@@ -1,217 +0,0 @@
-From 31da30f23cddd36db29d5b6a1c7619361b271fb4 Mon Sep 17 00:00:00 2001
-From: Charles Fol <folcharles@gmail.com>
-Date: Thu, 28 Mar 2024 12:25:38 -0300
-Subject: [PATCH] iconv: ISO-2022-CN-EXT: fix out-of-bound writes when writing
- escape sequence (CVE-2024-2961)
-
-ISO-2022-CN-EXT uses escape sequences to indicate character set changes
-(as specified by RFC 1922).  While the SOdesignation has the expected
-bounds checks, neither SS2designation nor SS3designation have its;
-allowing a write overflow of 1, 2, or 3 bytes with fixed values:
-'$+I', '$+J', '$+K', '$+L', '$+M', or '$*H'.
-
-Checked on aarch64-linux-gnu.
-
-Co-authored-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
-Reviewed-by: Carlos O'Donell <carlos@redhat.com>
-Tested-by: Carlos O'Donell <carlos@redhat.com>
-
-(cherry picked from commit f9dc609e06b1136bb0408be9605ce7973a767ada)
----
- iconvdata/Makefile                    |   5 +-
- iconvdata/iso-2022-cn-ext.c           |  12 +++
- iconvdata/tst-iconv-iso-2022-cn-ext.c | 128 ++++++++++++++++++++++++++
- 3 files changed, 144 insertions(+), 1 deletion(-)
- create mode 100644 iconvdata/tst-iconv-iso-2022-cn-ext.c
-
-diff --git a/iconvdata/Makefile b/iconvdata/Makefile
-index ea019ce5c0..7196a8744b 100644
---- a/iconvdata/Makefile
-+++ b/iconvdata/Makefile
-@@ -75,7 +75,8 @@ ifeq (yes,$(build-shared))
- tests = bug-iconv1 bug-iconv2 tst-loading tst-e2big tst-iconv4 bug-iconv4 \
- 	tst-iconv6 bug-iconv5 bug-iconv6 tst-iconv7 bug-iconv8 bug-iconv9 \
- 	bug-iconv10 bug-iconv11 bug-iconv12 tst-iconv-big5-hkscs-to-2ucs4 \
--	bug-iconv13 bug-iconv14 bug-iconv15
-+	bug-iconv13 bug-iconv14 bug-iconv15 \
-+	tst-iconv-iso-2022-cn-ext
- ifeq ($(have-thread-library),yes)
- tests += bug-iconv3
- endif
-@@ -330,6 +331,8 @@ $(objpfx)bug-iconv14.out: $(addprefix $(objpfx), $(gconv-modules)) \
- 			  $(addprefix $(objpfx),$(modules.so))
- $(objpfx)bug-iconv15.out: $(addprefix $(objpfx), $(gconv-modules)) \
- 			  $(addprefix $(objpfx),$(modules.so))
-+$(objpfx)tst-iconv-iso-2022-cn-ext.out: $(addprefix $(objpfx), $(gconv-modules)) \
-+					$(addprefix $(objpfx),$(modules.so))
- 
- $(objpfx)iconv-test.out: run-iconv-test.sh \
- 			 $(addprefix $(objpfx), $(gconv-modules)) \
-diff --git a/iconvdata/iso-2022-cn-ext.c b/iconvdata/iso-2022-cn-ext.c
-index b34c8a36f4..cce29b1969 100644
---- a/iconvdata/iso-2022-cn-ext.c
-+++ b/iconvdata/iso-2022-cn-ext.c
-@@ -574,6 +574,12 @@ DIAG_IGNORE_Os_NEEDS_COMMENT (5, "-Wmaybe-uninitialized");
- 	      {								      \
- 		const char *escseq;					      \
- 									      \
-+		if (outptr + 4 > outend)				      \
-+		  {							      \
-+		    result = __GCONV_FULL_OUTPUT;			      \
-+		    break;						      \
-+		  }							      \
-+									      \
- 		assert (used == CNS11643_2_set); /* XXX */		      \
- 		escseq = "*H";						      \
- 		*outptr++ = ESC;					      \
-@@ -587,6 +593,12 @@ DIAG_IGNORE_Os_NEEDS_COMMENT (5, "-Wmaybe-uninitialized");
- 	      {								      \
- 		const char *escseq;					      \
- 									      \
-+		if (outptr + 4 > outend)				      \
-+		  {							      \
-+		    result = __GCONV_FULL_OUTPUT;			      \
-+		    break;						      \
-+		  }							      \
-+									      \
- 		assert ((used >> 5) >= 3 && (used >> 5) <= 7);		      \
- 		escseq = "+I+J+K+L+M" + ((used >> 5) - 3) * 2;		      \
- 		*outptr++ = ESC;					      \
-diff --git a/iconvdata/tst-iconv-iso-2022-cn-ext.c b/iconvdata/tst-iconv-iso-2022-cn-ext.c
-new file mode 100644
-index 0000000000..96a8765fd5
---- /dev/null
-+++ b/iconvdata/tst-iconv-iso-2022-cn-ext.c
-@@ -0,0 +1,128 @@
-+/* Verify ISO-2022-CN-EXT does not write out of the bounds.
-+   Copyright (C) 2024 Free Software Foundation, Inc.
-+   This file is part of the GNU C Library.
-+
-+   The GNU C Library is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU Lesser General Public
-+   License as published by the Free Software Foundation; either
-+   version 2.1 of the License, or (at your option) any later version.
-+
-+   The GNU C Library is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+   Lesser General Public License for more details.
-+
-+   You should have received a copy of the GNU Lesser General Public
-+   License along with the GNU C Library; if not, see
-+   <https://www.gnu.org/licenses/>.  */
-+
-+#include <stdio.h>
-+#include <string.h>
-+
-+#include <errno.h>
-+#include <iconv.h>
-+#include <sys/mman.h>
-+
-+#include <support/xunistd.h>
-+#include <support/check.h>
-+#include <support/support.h>
-+
-+/* The test sets up a two memory page buffer with the second page marked
-+   PROT_NONE to trigger a fault if the conversion writes beyond the exact
-+   expected amount.  Then we carry out various conversions and precisely
-+   place the start of the output buffer in order to trigger a SIGSEGV if the
-+   process writes anywhere between 1 and page sized bytes more (only one
-+   PROT_NONE page is setup as a canary) than expected.  These tests exercise
-+   all three of the cases in ISO-2022-CN-EXT where the converter must switch
-+   character sets and may run out of buffer space while doing the
-+   operation.  */
-+
-+static int
-+do_test (void)
-+{
-+  iconv_t cd = iconv_open ("ISO-2022-CN-EXT", "UTF-8");
-+  TEST_VERIFY_EXIT (cd != (iconv_t) -1);
-+
-+  char *ntf;
-+  size_t ntfsize;
-+  char *outbufbase;
-+  {
-+    int pgz = getpagesize ();
-+    TEST_VERIFY_EXIT (pgz > 0);
-+    ntfsize = 2 * pgz;
-+
-+    ntf = xmmap (NULL, ntfsize, PROT_READ | PROT_WRITE, MAP_PRIVATE
-+		 | MAP_ANONYMOUS, -1);
-+    xmprotect (ntf + pgz, pgz, PROT_NONE);
-+
-+    outbufbase = ntf + pgz;
-+  }
-+
-+  /* Check if SOdesignation escape sequence does not trigger an OOB write.  */
-+  {
-+    char inbuf[] = "\xe4\xba\xa4\xe6\x8d\xa2";
-+
-+    for (int i = 0; i < 9; i++)
-+      {
-+	char *inp = inbuf;
-+	size_t inleft = sizeof (inbuf) - 1;
-+
-+	char *outp = outbufbase - i;
-+	size_t outleft = i;
-+
-+	TEST_VERIFY_EXIT (iconv (cd, &inp, &inleft, &outp, &outleft)
-+			  == (size_t) -1);
-+	TEST_COMPARE (errno, E2BIG);
-+
-+	TEST_VERIFY_EXIT (iconv (cd, NULL, NULL, NULL, NULL) == 0);
-+      }
-+  }
-+
-+  /* Same as before for SS2designation.  */
-+  {
-+    char inbuf[] = "ã´½ \xe3\xb4\xbd";
-+
-+    for (int i = 0; i < 14; i++)
-+      {
-+	char *inp = inbuf;
-+	size_t inleft = sizeof (inbuf) - 1;
-+
-+	char *outp = outbufbase - i;
-+	size_t outleft = i;
-+
-+	TEST_VERIFY_EXIT (iconv (cd, &inp, &inleft, &outp, &outleft)
-+			  == (size_t) -1);
-+	TEST_COMPARE (errno, E2BIG);
-+
-+	TEST_VERIFY_EXIT (iconv (cd, NULL, NULL, NULL, NULL) == 0);
-+      }
-+  }
-+
-+  /* Same as before for SS3designation.  */
-+  {
-+    char inbuf[] = "劄 \xe5\x8a\x84";
-+
-+    for (int i = 0; i < 14; i++)
-+      {
-+	char *inp = inbuf;
-+	size_t inleft = sizeof (inbuf) - 1;
-+
-+	char *outp = outbufbase - i;
-+	size_t outleft = i;
-+
-+	TEST_VERIFY_EXIT (iconv (cd, &inp, &inleft, &outp, &outleft)
-+			  == (size_t) -1);
-+	TEST_COMPARE (errno, E2BIG);
-+
-+	TEST_VERIFY_EXIT (iconv (cd, NULL, NULL, NULL, NULL) == 0);
-+      }
-+  }
-+
-+  TEST_VERIFY_EXIT (iconv_close (cd) != -1);
-+
-+  xmunmap (ntf, ntfsize);
-+
-+  return 0;
-+}
-+
-+#include <support/test-driver.c>
--- 
-2.39.3
-
-

source/l/gst-plugins-good/gst-plugins-good.SlackBuild

@@ -27,7 +27,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=gst-plugins-good
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -45,17 +45,13 @@ TMP=${TMP:-/tmp}
 PKG=$TMP/package-$PKGNAM
 
 if [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2 -fcf-protection=none"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/l/libcdio-paranoia/libcdio-paranoia.SlackBuild

@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libcdio-paranoia
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
@@ -33,7 +33,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
   case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
+    i?86)    export ARCH=i686 ;;
     armv7hl) export ARCH=$MARCH ;;
     arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
@@ -49,14 +49,14 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"

source/l/libproxy/libproxy.SlackBuild

@@ -29,7 +29,7 @@ BUILD=${BUILD:-1}
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) ARCH=arm ;;
        *) ARCH=$( uname -m ) ;;
   esac
@@ -52,10 +52,10 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/l/lz4/lz4.SlackBuild

@@ -30,21 +30,21 @@ BUILD=${BUILD:-1}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
   esac
 fi
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"
@@ -80,7 +80,6 @@ find . \
 CFLAGS="$SLKCFLAGS" \
 make $NUMJOBS \
   PREFIX=/usr \
-  LIBDIR=/usr/lib$LIBDIRSUFFIX \
   MANDIR=/usr/man \
   BUILD_STATIC=no || exit 1
 

source/l/mozjs115/mozjs115.SlackBuild

@@ -58,10 +58,10 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/l/poppler/poppler.SlackBuild

@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=poppler
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 QT6OPT=${QT6OPT:--DENABLE_QT6=ON}
 
 # Automatically determine the architecture we're building on:
@@ -51,15 +51,14 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2"
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"
@@ -103,7 +102,7 @@ cmake \
   $QT6OPT \
   .. || exit 1
 
-make $NUMJOBS || make || exit 1
+make $NUMJOBS || exit 1
 make install DESTDIR=$PKG || exit 1
 
 # Back to source tarball root directory:

source/l/python-importlib_metadata/python-importlib_metadata.SlackBuild

@@ -29,7 +29,7 @@ BUILD=${BUILD:-1}
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) ARCH=arm ;;
        *) ARCH=$( uname -m ) ;;
   esac

source/l/python-sphinx/python-sphinx.SlackBuild

@@ -29,7 +29,7 @@ BUILD=${BUILD:-1}
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) ARCH=arm ;;
        *) ARCH=$( uname -m ) ;;
   esac

source/l/qt5-webkit/qt5-webkit.SlackBuild

@@ -28,12 +28,12 @@ PKGNAM=qt5-webkit
 SRCNAM=qtwebkit
 SRCVER=${SRCVER:-5.212.0-alpha4}
 VERSION=$(echo $SRCVER | tr - _)
-BUILD=${BUILD:-12}
+BUILD=${BUILD:-13}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -55,13 +55,13 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
@@ -109,6 +109,9 @@ zcat $CWD/webkit-offlineasm-warnings-ruby27.patch | patch -p1 --verbose || exit
 # Fix for gcc13:
 zcat $CWD/qt5-webkit.gcc13.diff.gz | patch -p1 --verbose || exit 1
 
+# Fix for gcc14:
+zcat $CWD/qtwebkit-fix-build-gcc14.patch.gz | patch -p1 --verbose || exit 1
+
 # Fix for icu68:
 zcat $CWD/icu68.patch.gz | patch -p0 --verbose || exit 1
 

source/l/qt5-webkit/qtwebkit-fix-build-gcc14.patch

@@ -0,0 +1,15 @@
+diff --git a/Source/WebCore/page/csp/ContentSecurityPolicy.cpp b/Source/WebCore/page/csp/ContentSecurityPolicy.cpp
+index 9e726d5..4876f0f 100644
+--- a/Source/WebCore/page/csp/ContentSecurityPolicy.cpp
++++ b/Source/WebCore/page/csp/ContentSecurityPolicy.cpp
+@@ -231,8 +231,9 @@ bool isAllowedByAllWithHashFromContent(const CSPDirectiveListVector& policies, c
+         auto cryptoDigest = CryptoDigest::create(toCryptoDigestAlgorithm(algorithm));
+         cryptoDigest->addBytes(contentCString.data(), contentCString.length());
+         Vector<uint8_t> digest = cryptoDigest->computeHash();
++        ContentSecurityPolicyHash hash = std::make_pair(algorithm, digest);
+         for (auto& policy : policies) {
+-            if ((policy.get()->*allowed)(std::make_pair(algorithm, digest)))
++            if ((policy.get()->*allowed)(hash))
+                 return true;
+         }
+     }

source/l/qt5/qt5.SlackBuild

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -41,7 +41,7 @@ SYSTEM_FFMPEG=${SYSTEM_FFMPEG:-YES}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -65,12 +65,16 @@ elif [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  SLKLDFLAGS=""
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   SLKLDFLAGS=""
   SLKLDFLAGS="-L/usr/lib64"
   LIBDIRSUFFIX="64"

source/l/qt6/qt6.SlackBuild

@@ -32,7 +32,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=qt6
 VERSION=$(ls qt-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 PKGSRC=$(echo $VERSION | cut -d - -f 1)
 PKGVER=$(echo $VERSION | tr - _)
 
@@ -67,8 +67,7 @@ elif [ "$ARCH" = "i586" ]; then
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2 -fcf-protection=none"
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
@@ -76,7 +75,7 @@ elif [ "$ARCH" = "s390" ]; then
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   SLKLDFLAGS="-L/usr/lib64"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then

source/l/sip/sip.SlackBuild

@@ -28,14 +28,14 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=sip
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
+    i?86) ARCH=i686 ;;
     arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *) ARCH=$(uname -m) ;;
@@ -54,9 +54,9 @@ fi
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
 else

source/l/spirv-llvm-translator/spirv-llvm-translator.SlackBuild

@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=spirv-llvm-translator
 VERSION=${VERSION:-$(echo SPIRV-LLVM-Translator-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
@@ -32,7 +32,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
   case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
+    i?86)    export ARCH=i686 ;;
     armv7hl) export ARCH=$MARCH ;;
     arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
@@ -51,11 +51,14 @@ fi
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"

source/l/v4l-utils/v4l-utils.SlackBuild

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Copyright 2009  Eric Hameleers, Eindhoven, NL
-# Copyright 2009, 2010, 2011, 2013, 2018, 2020, 2023  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2010, 2011, 2013, 2018, 2020, 2023, 2024  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 
 # Redistribution and use of this script, with or without modification, is
@@ -32,7 +32,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -53,11 +53,14 @@ PKG=$TMP/package-$PKGNAM
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"
@@ -101,12 +104,16 @@ meson setup \
   --buildtype=release \
   -Ddoxygen-doc=disabled \
   -Ddoxygen-html=false \
+  -Dgconv=disabled \
   .. || exit 1
   "${NINJA:=ninja}" $NUMJOBS || exit 1
   DESTDIR=$PKG $NINJA install || exit 1
 cd ..
 
 # DO NOT overwrite gconv-modules from glibc!
+# Yeah, I think we'll just disable these above since I'm not aware of
+# any important reason for the gconv modules anyway.
+# If I'm wrong, let me know.
 if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/gconv/gconv-modules ]; then
   mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/gconv/gconv-modules.d
   mv $PKG/usr/lib${LIBDIRSUFFIX}/gconv/gconv-modules $PKG/usr/lib${LIBDIRSUFFIX}/gconv/gconv-modules.d/v4l-utils.conf

source/n/bind/bind.SlackBuild

@@ -29,7 +29,7 @@ BUILD=${BUILD:-1}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -51,14 +51,14 @@ PKG=$TMP/package-${PKGNAM}
 rm -rf $PKG
 mkdir -p $TMP $PKG/etc/default
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 fi
 

source/n/fetchmail/fetchmail.SlackBuild

@@ -24,12 +24,12 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=fetchmail
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -44,12 +44,12 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
 else
   SLKCFLAGS="-O2"
 fi

source/n/obexftp/obexftp.SlackBuild

@@ -23,14 +23,14 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=obexftp
 VERSION=${VERSION:-$(echo $PKGNAM-*-Source.tar.?z* | rev | cut -f 3- -d . | cut -f 2 -d - | rev)}
-BUILD=${BUILD:-12}
+BUILD=${BUILD:-13}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -48,14 +48,14 @@ fi
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-${PKGNAM}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/n/pinentry/pinentry.SlackBuild

@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=pinentry
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -52,8 +52,7 @@ if [ "$ARCH" = "i586" ]; then
   LIBDIRSUFFIX=""
   ARCHQUADLET=""
 elif [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2"
   LIBDIRSUFFIX=""
   ARCHQUADLET=""
 elif [ "$ARCH" = "s390" ]; then
@@ -61,7 +60,7 @@ elif [ "$ARCH" = "s390" ]; then
   LIBDIRSUFFIX=""
   ARCHQUADLET=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
   ARCHQUADLET=""
 elif [ "$ARCH" = "arm" ]; then

source/n/wpa_supplicant/patches/8e6485a1bcb0baffdea9e55255a81270b768439c.patch

@@ -1,210 +0,0 @@
-From 8e6485a1bcb0baffdea9e55255a81270b768439c Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Sat, 8 Jul 2023 19:55:32 +0300
-Subject: PEAP client: Update Phase 2 authentication requirements
-
-The previous PEAP client behavior allowed the server to skip Phase 2
-authentication with the expectation that the server was authenticated
-during Phase 1 through TLS server certificate validation. Various PEAP
-specifications are not exactly clear on what the behavior on this front
-is supposed to be and as such, this ended up being more flexible than
-the TTLS/FAST/TEAP cases. However, this is not really ideal when
-unfortunately common misconfiguration of PEAP is used in deployed
-devices where the server trust root (ca_cert) is not configured or the
-user has an easy option for allowing this validation step to be skipped.
-
-Change the default PEAP client behavior to be to require Phase 2
-authentication to be successfully completed for cases where TLS session
-resumption is not used and the client certificate has not been
-configured. Those two exceptions are the main cases where a deployed
-authentication server might skip Phase 2 and as such, where a more
-strict default behavior could result in undesired interoperability
-issues. Requiring Phase 2 authentication will end up disabling TLS
-session resumption automatically to avoid interoperability issues.
-
-Allow Phase 2 authentication behavior to be configured with a new phase1
-configuration parameter option:
-'phase2_auth' option can be used to control Phase 2 (i.e., within TLS
-tunnel) behavior for PEAP:
- * 0 = do not require Phase 2 authentication
- * 1 = require Phase 2 authentication when client certificate
-   (private_key/client_cert) is no used and TLS session resumption was
-   not used (default)
- * 2 = require Phase 2 authentication in all cases
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
----
- src/eap_peer/eap_config.h          |  8 ++++++++
- src/eap_peer/eap_peap.c            | 40 +++++++++++++++++++++++++++++++++++---
- src/eap_peer/eap_tls_common.c      |  6 ++++++
- src/eap_peer/eap_tls_common.h      |  5 +++++
- wpa_supplicant/wpa_supplicant.conf |  7 +++++++
- 5 files changed, 63 insertions(+), 3 deletions(-)
-
-diff --git a/src/eap_peer/eap_config.h b/src/eap_peer/eap_config.h
-index 26744ab68..58d5a1359 100644
---- a/src/eap_peer/eap_config.h
-+++ b/src/eap_peer/eap_config.h
-@@ -471,6 +471,14 @@ struct eap_peer_config {
- 	 * 1 = use cryptobinding if server supports it
- 	 * 2 = require cryptobinding
- 	 *
-+	 * phase2_auth option can be used to control Phase 2 (i.e., within TLS
-+	 * tunnel) behavior for PEAP:
-+	 * 0 = do not require Phase 2 authentication
-+	 * 1 = require Phase 2 authentication when client certificate
-+	 *  (private_key/client_cert) is no used and TLS session resumption was
-+	 *  not used (default)
-+	 * 2 = require Phase 2 authentication in all cases
-+	 *
- 	 * EAP-WSC (WPS) uses following options: pin=Device_Password and
- 	 * uuid=Device_UUID
- 	 *
-diff --git a/src/eap_peer/eap_peap.c b/src/eap_peer/eap_peap.c
-index 12e30df29..608069719 100644
---- a/src/eap_peer/eap_peap.c
-+++ b/src/eap_peer/eap_peap.c
-@@ -67,6 +67,7 @@ struct eap_peap_data {
- 	u8 cmk[20];
- 	int soh; /* Whether IF-TNCCS-SOH (Statement of Health; Microsoft NAP)
- 		  * is enabled. */
-+	enum { NO_AUTH, FOR_INITIAL, ALWAYS } phase2_auth;
- };
- 
- 
-@@ -114,6 +115,19 @@ static void eap_peap_parse_phase1(struct eap_peap_data *data,
- 		wpa_printf(MSG_DEBUG, "EAP-PEAP: Require cryptobinding");
- 	}
- 
-+	if (os_strstr(phase1, "phase2_auth=0")) {
-+		data->phase2_auth = NO_AUTH;
-+		wpa_printf(MSG_DEBUG,
-+			   "EAP-PEAP: Do not require Phase 2 authentication");
-+	} else if (os_strstr(phase1, "phase2_auth=1")) {
-+		data->phase2_auth = FOR_INITIAL;
-+		wpa_printf(MSG_DEBUG,
-+			   "EAP-PEAP: Require Phase 2 authentication for initial connection");
-+	} else if (os_strstr(phase1, "phase2_auth=2")) {
-+		data->phase2_auth = ALWAYS;
-+		wpa_printf(MSG_DEBUG,
-+			   "EAP-PEAP: Require Phase 2 authentication for all cases");
-+	}
- #ifdef EAP_TNC
- 	if (os_strstr(phase1, "tnc=soh2")) {
- 		data->soh = 2;
-@@ -142,6 +156,7 @@ static void * eap_peap_init(struct eap_sm *sm)
- 	data->force_peap_version = -1;
- 	data->peap_outer_success = 2;
- 	data->crypto_binding = OPTIONAL_BINDING;
-+	data->phase2_auth = FOR_INITIAL;
- 
- 	if (config && config->phase1)
- 		eap_peap_parse_phase1(data, config->phase1);
-@@ -454,6 +469,20 @@ static int eap_tlv_validate_cryptobinding(struct eap_sm *sm,
- }
- 
- 
-+static bool peap_phase2_sufficient(struct eap_sm *sm,
-+				   struct eap_peap_data *data)
-+{
-+	if ((data->phase2_auth == ALWAYS ||
-+	     (data->phase2_auth == FOR_INITIAL &&
-+	      !tls_connection_resumed(sm->ssl_ctx, data->ssl.conn) &&
-+	      !data->ssl.client_cert_conf) ||
-+	     data->phase2_eap_started) &&
-+	    !data->phase2_eap_success)
-+		return false;
-+	return true;
-+}
-+
-+
- /**
-  * eap_tlv_process - Process a received EAP-TLV message and generate a response
-  * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init()
-@@ -568,6 +597,11 @@ static int eap_tlv_process(struct eap_sm *sm, struct eap_peap_data *data,
- 					   " - force failed Phase 2");
- 				resp_status = EAP_TLV_RESULT_FAILURE;
- 				ret->decision = DECISION_FAIL;
-+			} else if (!peap_phase2_sufficient(sm, data)) {
-+				wpa_printf(MSG_INFO,
-+					   "EAP-PEAP: Server indicated Phase 2 success, but sufficient Phase 2 authentication has not been completed");
-+				resp_status = EAP_TLV_RESULT_FAILURE;
-+				ret->decision = DECISION_FAIL;
- 			} else {
- 				resp_status = EAP_TLV_RESULT_SUCCESS;
- 				ret->decision = DECISION_UNCOND_SUCC;
-@@ -887,8 +921,7 @@ continue_req:
- 			/* EAP-Success within TLS tunnel is used to indicate
- 			 * shutdown of the TLS channel. The authentication has
- 			 * been completed. */
--			if (data->phase2_eap_started &&
--			    !data->phase2_eap_success) {
-+			if (!peap_phase2_sufficient(sm, data)) {
- 				wpa_printf(MSG_DEBUG, "EAP-PEAP: Phase 2 "
- 					   "Success used to indicate success, "
- 					   "but Phase 2 EAP was not yet "
-@@ -1199,8 +1232,9 @@ static struct wpabuf * eap_peap_process(struct eap_sm *sm, void *priv,
- static bool eap_peap_has_reauth_data(struct eap_sm *sm, void *priv)
- {
- 	struct eap_peap_data *data = priv;
-+
- 	return tls_connection_established(sm->ssl_ctx, data->ssl.conn) &&
--		data->phase2_success;
-+		data->phase2_success && data->phase2_auth != ALWAYS;
- }
- 
- 
-diff --git a/src/eap_peer/eap_tls_common.c b/src/eap_peer/eap_tls_common.c
-index 6193b4bdb..966cbd6c7 100644
---- a/src/eap_peer/eap_tls_common.c
-+++ b/src/eap_peer/eap_tls_common.c
-@@ -242,6 +242,12 @@ static int eap_tls_params_from_conf(struct eap_sm *sm,
- 
- 	sm->ext_cert_check = !!(params->flags & TLS_CONN_EXT_CERT_CHECK);
- 
-+	if (!phase2)
-+		data->client_cert_conf = params->client_cert ||
-+			params->client_cert_blob ||
-+			params->private_key ||
-+			params->private_key_blob;
-+
- 	return 0;
- }
- 
-diff --git a/src/eap_peer/eap_tls_common.h b/src/eap_peer/eap_tls_common.h
-index 9ac00121f..334863413 100644
---- a/src/eap_peer/eap_tls_common.h
-+++ b/src/eap_peer/eap_tls_common.h
-@@ -79,6 +79,11 @@ struct eap_ssl_data {
- 	 * tls_v13 - Whether TLS v1.3 or newer is used
- 	 */
- 	int tls_v13;
-+
-+	/**
-+	 * client_cert_conf: Whether client certificate has been configured
-+	 */
-+	bool client_cert_conf;
- };
- 
- 
-diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
-index f0b82443e..1b09f57d3 100644
---- a/wpa_supplicant/wpa_supplicant.conf
-+++ b/wpa_supplicant/wpa_supplicant.conf
-@@ -1370,6 +1370,13 @@ fast_reauth=1
- #	 * 0 = do not use cryptobinding (default)
- #	 * 1 = use cryptobinding if server supports it
- #	 * 2 = require cryptobinding
-+#	'phase2_auth' option can be used to control Phase 2 (i.e., within TLS
-+#	tunnel) behavior for PEAP:
-+#	 * 0 = do not require Phase 2 authentication
-+#	 * 1 = require Phase 2 authentication when client certificate
-+#	   (private_key/client_cert) is no used and TLS session resumption was
-+#	   not used (default)
-+#	 * 2 = require Phase 2 authentication in all cases
- #	EAP-WSC (WPS) uses following options: pin=<Device Password> or
- #	pbc=1.
- #
--- 
-cgit v1.2.3-18-g5258
-

source/n/wpa_supplicant/wpa_supplicant.SlackBuild

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Copyright 2004-2008 Eric Hameleers, Eindhoven, NL
-# Copyright 2008-2021  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008-2024  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,15 +24,15 @@
 cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=wpa_supplicant
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-5}
+BUILD=${BUILD:-1}
 
 SRCVERSION=$(printf $VERSION | tr _ -)
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -49,14 +49,14 @@ fi
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "arm" ]; then
   SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"
@@ -76,7 +76,7 @@ rm -rf $PKG
 mkdir -p $TMP $PKG
 cd $TMP
 rm -rf ${PKGNAM}-${SRCVERSION}
-tar xvf $CWD/${PKGNAM}-${SRCVERSION}.tar.?z* || exit 1
+tar xvf $CWD/${PKGNAM}-${SRCVERSION}.tar.?z || exit 1
 cd ${PKGNAM}-${SRCVERSION}
 chown -R root:root .
 find . \
@@ -91,9 +91,6 @@ zcat $CWD/patches/wpa_supplicant-quiet-scan-results-message.patch.gz | patch -p1
 # Allow legacy tls to avoid breaking WPA2-Enterprise:
 zcat $CWD/patches/allow-tlsv1.patch.gz | patch -p1 --verbose || exit 1
 
-# CVE-2023-52160:
-zcat $CWD/patches/8e6485a1bcb0baffdea9e55255a81270b768439c.patch.gz | patch -p1 --verbose || exit 1
-
 cd wpa_supplicant
 
 # Create the configuration file for building wpa_supplicant:

source/x/fcitx5-qt/fcitx5-qt.SlackBuild

@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=fcitx5-qt
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.zst | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
@@ -45,15 +45,14 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2"
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"

source/x/ibus-m17n/ibus-m17n.SlackBuild

@@ -35,7 +35,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
   case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
+    i?86)    export ARCH=i686 ;;
     armv7hl) export ARCH=$MARCH ;;
     arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
@@ -47,13 +47,13 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"

source/x/libdrm/libdrm.SlackBuild

@@ -24,12 +24,12 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libdrm
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine architecture for build & packaging:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
     *)    export ARCH=$( uname -m ) ;;
   esac
@@ -54,11 +54,14 @@ if [ "$ARCH" = "i486" ]; then
 elif [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/x/marisa/marisa.SlackBuild

@@ -26,7 +26,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=marisa
 SRCNAM=marisa-trie
 VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
-BUILD=${BUILD:-9}
+BUILD=${BUILD:-10}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
@@ -34,7 +34,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
   case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
+    i?86)    export ARCH=i686 ;;
     armv7hl) export ARCH=$MARCH ;;
     arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
@@ -42,14 +42,14 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"

source/x/mesa/mesa.SlackBuild

@@ -26,7 +26,7 @@ PKGNAM=mesa
 VERSION=${VERSION:-$(echo $PKGNAM-[0-9]*.tar.?z | rev | cut -f 3- -d . | rev | cut -f 2- -d -)}
 AMBERVERS=${AMBERVERS:-21.3.9}
 DEMOVERS=${DEMOVERS:-8.5.0}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 BUILD_AMBER=${BUILD_AMBER:-YES}
 BUILD_DEMOS=${BUILD_DEMOS:-YES}
 CODECS=${CODECS:-h264dec,h264enc,h265dec,h265enc,vc1dec,av1dec,av1enc,vp9dec}
@@ -38,7 +38,7 @@ GALLIUM_DRIVERS="nouveau,r300,r600,svga,radeonsi,swrast,virgl,i915,iris,crocus,z
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
        *) export ARCH=$( uname -m ) ;;
   esac
@@ -58,8 +58,11 @@ PKG=$TMP/package-mesa
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
   # Only supported on x86_64:
   INTELRT="-Dintel-rt=enabled"  

source/x/vulkan-sdk/vulkan-sdk.SlackBuild

@@ -27,7 +27,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=vulkan-sdk
 # The ./VERSION file is created by ./fetch-sources.sh:
 VERSION=${VERSION:-$(cat VERSION)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Choose a compiler (gcc/g++ or clang/clang++ if you'd like to debug that ;-)
 export CC=${CC:-gcc}
@@ -37,7 +37,7 @@ export CXX=${CXX:-g++}
 MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
   case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
+    i?86)    export ARCH=i686 ;;
     armv7hl) export ARCH=$MARCH ;;
     arm*)    export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
@@ -55,14 +55,14 @@ fi
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"

source/xap/audacious-plugins/audacious-plugins.SlackBuild

@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=audacious-plugins
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Whether to include faad/aac support:
 FAAD=${FAAD:---disable-aac}
@@ -48,15 +48,14 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2"
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/xap/audacious-plugins/audacious-plugins.SlackBuild.meson

@@ -34,7 +34,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -44,14 +44,14 @@ fi
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-${PKGNAM}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 else
   SLKCFLAGS="-O2"

source/xap/audacious/audacious.SlackBuild

@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=audacious
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
@@ -53,15 +53,14 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2"
   SLKLDFLAGS=""
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "arm" ]; then
   SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"

source/xap/audacious/audacious.SlackBuild.meson

@@ -31,7 +31,7 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
+    i?86) export ARCH=i686 ;;
     arm*) export ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
        *) export ARCH=$( uname -m ) ;;
@@ -49,14 +49,14 @@ fi
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-${PKGNAM}
 
-if [ "$ARCH" = "i586" ]; then
+if [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "arm" ]; then
   SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"

source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild

@@ -87,13 +87,13 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-g0"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-g0"
+  SLKCFLAGS="-g0 -march=pentium4 -mtune=generic"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-g0"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-g0 -fPIC"
+  SLKCFLAGS="-g0 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "arm" ]; then
   SLKCFLAGS="-g0 -march=armv4 -mtune=xscale"

source/xap/xaos/xaos.SlackBuild

@@ -26,12 +26,11 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=xaos
 SRCNAM=XaoS
 VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | cut -f 2 -d -)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
-    # might as well use i686 since it won't listen to our CFLAGS anyway
     i?86) ARCH=i686 ;;
     arm*) ARCH=arm ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
@@ -53,14 +52,13 @@ if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  # Looks like this is baseline now... maybe time to bump everything to at least i686
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686 -mfpmath=sse -msse -msse2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
   SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"