Tue Oct 1 18:01:38 UTC 2024

Several ELF objects were found to have rpaths pointing into /tmp, a world
writable directory. This could have allowed a local attacker to launch denial
of service attacks or execute arbitrary code when the affected binaries are
run by placing crafted ELF objects in the /tmp rpath location. All rpaths with
an embedded /tmp path have been scrubbed from the binaries, and makepkg has
gained a lint feature to detect these so that they won't creep back in.
extra/llvm-17.0.6-x86_64-2_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)
patches/packages/cryfs-0.10.3-x86_64-5_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)
patches/packages/cups-filters-1.28.17-x86_64-2_slack15.0.txz:  Rebuilt.
  Mitigate security issue that could lead to a denial of service or
  the execution of arbitrary code.
  Rebuilt with --with-browseremoteprotocols=none to disable incoming
  connections, since this daemon has been shown to be insecure. If you
  actually use cups-browsed, be sure to install the new
  /etc/cups/cups-browsed.conf.new containing this line:
  BrowseRemoteProtocols none
  For more information, see:
    https://www.cve.org/CVERecord?id=CVE-2024-47176
  (* Security fix *)
patches/packages/espeak-ng-1.50-x86_64-4_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)
patches/packages/libvncserver-0.9.13-x86_64-4_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)
patches/packages/marisa-0.2.6-x86_64-5_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)
patches/packages/mlt-7.4.0-x86_64-2_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)
patches/packages/mozilla-firefox-115.16.0esr-x86_64-1_slack15.0.txz:  Upgraded.
  This update contains security fixes and improvements.
  For more information, see:
    https://www.mozilla.org/en-US/firefox/115.16.0/releasenotes/
    https://www.mozilla.org/security/advisories/mfsa2024-48
    https://www.cve.org/CVERecord?id=CVE-2024-9392
    https://www.cve.org/CVERecord?id=CVE-2024-9393
    https://www.cve.org/CVERecord?id=CVE-2024-9394
    https://www.cve.org/CVERecord?id=CVE-2024-9401
  (* Security fix *)
patches/packages/openobex-1.7.2-x86_64-6_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)
patches/packages/pkgtools-15.0-noarch-44_slack15.0.txz:  Rebuilt.
  makepkg: when looking for ELF objects with --remove-rpaths or
  --remove-tmp-rpaths, avoid false hits on files containing 'ELF' as part
  of the directory or filename.
  Also warn about /tmp rpaths after the package is built.
patches/packages/spirv-llvm-translator-13.0.0-x86_64-2_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)
testing/packages/llvm-18.1.8-x86_64-2_slack15.0.txz:  Rebuilt.
  Remove rpaths from binaries.
  (* Security fix *)

ChangeLog.rss

@@ -11,9 +11,78 @@
       <description>Tracking Slackware development in git.</description>
       <language>en-us</language>
       <id xmlns="http://www.w3.org/2005/Atom">urn:uuid:c964f45e-6732-11e8-bbe5-107b4450212f</id>
-      <pubDate>Fri, 27 Sep 2024 21:10:23 GMT</pubDate>
+      <pubDate>Tue,  1 Oct 2024 18:01:38 GMT</pubDate>
-      <lastBuildDate>Sat, 28 Sep 2024 11:30:17 GMT</lastBuildDate>
+      <lastBuildDate>Wed,  2 Oct 2024 11:30:23 GMT</lastBuildDate>
       <generator>maintain_current_git.sh v 1.17</generator>
+      <item>
+         <title>Tue,  1 Oct 2024 18:01:38 GMT</title>
+         <pubDate>Tue,  1 Oct 2024 18:01:38 GMT</pubDate>
+         <link>https://git.slackware.nl/current/tag/?h=20241001180138</link>
+         <guid isPermaLink="false">20241001180138</guid>
+         <description>
+           <![CDATA[<pre>
+Several ELF objects were found to have rpaths pointing into /tmp, a world
+writable directory. This could have allowed a local attacker to launch denial
+of service attacks or execute arbitrary code when the affected binaries are
+run by placing crafted ELF objects in the /tmp rpath location. All rpaths with
+an embedded /tmp path have been scrubbed from the binaries, and makepkg has
+gained a lint feature to detect these so that they won't creep back in.
+extra/llvm-17.0.6-x86_64-2_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/cryfs-0.10.3-x86_64-5_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/cups-filters-1.28.17-x86_64-2_slack15.0.txz:  Rebuilt.
+  Mitigate security issue that could lead to a denial of service or
+  the execution of arbitrary code.
+  Rebuilt with --with-browseremoteprotocols=none to disable incoming
+  connections, since this daemon has been shown to be insecure. If you
+  actually use cups-browsed, be sure to install the new
+  /etc/cups/cups-browsed.conf.new containing this line:
+  BrowseRemoteProtocols none
+  For more information, see:
+    https://www.cve.org/CVERecord?id=CVE-2024-47176
+  (* Security fix *)
+patches/packages/espeak-ng-1.50-x86_64-4_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/libvncserver-0.9.13-x86_64-4_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/marisa-0.2.6-x86_64-5_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/mlt-7.4.0-x86_64-2_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/mozilla-firefox-115.16.0esr-x86_64-1_slack15.0.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    https://www.mozilla.org/en-US/firefox/115.16.0/releasenotes/
+    https://www.mozilla.org/security/advisories/mfsa2024-48
+    https://www.cve.org/CVERecord?id=CVE-2024-9392
+    https://www.cve.org/CVERecord?id=CVE-2024-9393
+    https://www.cve.org/CVERecord?id=CVE-2024-9394
+    https://www.cve.org/CVERecord?id=CVE-2024-9401
+  (* Security fix *)
+patches/packages/openobex-1.7.2-x86_64-6_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/pkgtools-15.0-noarch-44_slack15.0.txz:  Rebuilt.
+  makepkg: when looking for ELF objects with --remove-rpaths or
+  --remove-tmp-rpaths, avoid false hits on files containing 'ELF' as part
+  of the directory or filename.
+  Also warn about /tmp rpaths after the package is built.
+patches/packages/spirv-llvm-translator-13.0.0-x86_64-2_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+testing/packages/llvm-18.1.8-x86_64-2_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+           </pre>]]>
+         </description>
+      </item>
       <item>
          <title>Fri, 27 Sep 2024 21:10:23 GMT</title>
          <pubDate>Fri, 27 Sep 2024 21:10:23 GMT</pubDate>

ChangeLog.txt

@@ -1,3 +1,64 @@
+Tue Oct  1 18:01:38 UTC 2024
+Several ELF objects were found to have rpaths pointing into /tmp, a world
+writable directory. This could have allowed a local attacker to launch denial
+of service attacks or execute arbitrary code when the affected binaries are
+run by placing crafted ELF objects in the /tmp rpath location. All rpaths with
+an embedded /tmp path have been scrubbed from the binaries, and makepkg has
+gained a lint feature to detect these so that they won't creep back in.
+extra/llvm-17.0.6-x86_64-2_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/cryfs-0.10.3-x86_64-5_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/cups-filters-1.28.17-x86_64-2_slack15.0.txz:  Rebuilt.
+  Mitigate security issue that could lead to a denial of service or
+  the execution of arbitrary code.
+  Rebuilt with --with-browseremoteprotocols=none to disable incoming
+  connections, since this daemon has been shown to be insecure. If you
+  actually use cups-browsed, be sure to install the new
+  /etc/cups/cups-browsed.conf.new containing this line:
+  BrowseRemoteProtocols none
+  For more information, see:
+    https://www.cve.org/CVERecord?id=CVE-2024-47176
+  (* Security fix *)
+patches/packages/espeak-ng-1.50-x86_64-4_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/libvncserver-0.9.13-x86_64-4_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/marisa-0.2.6-x86_64-5_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/mlt-7.4.0-x86_64-2_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/mozilla-firefox-115.16.0esr-x86_64-1_slack15.0.txz:  Upgraded.
+  This update contains security fixes and improvements.
+  For more information, see:
+    https://www.mozilla.org/en-US/firefox/115.16.0/releasenotes/
+    https://www.mozilla.org/security/advisories/mfsa2024-48
+    https://www.cve.org/CVERecord?id=CVE-2024-9392
+    https://www.cve.org/CVERecord?id=CVE-2024-9393
+    https://www.cve.org/CVERecord?id=CVE-2024-9394
+    https://www.cve.org/CVERecord?id=CVE-2024-9401
+  (* Security fix *)
+patches/packages/openobex-1.7.2-x86_64-6_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+patches/packages/pkgtools-15.0-noarch-44_slack15.0.txz:  Rebuilt.
+  makepkg: when looking for ELF objects with --remove-rpaths or
+  --remove-tmp-rpaths, avoid false hits on files containing 'ELF' as part
+  of the directory or filename.
+  Also warn about /tmp rpaths after the package is built.
+patches/packages/spirv-llvm-translator-13.0.0-x86_64-2_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
+testing/packages/llvm-18.1.8-x86_64-2_slack15.0.txz:  Rebuilt.
+  Remove rpaths from binaries.
+  (* Security fix *)
++--------------------------+
 Fri Sep 27 21:10:23 UTC 2024
 patches/packages/pkgtools-15.0-noarch-43_slack15.0.txz:  Rebuilt.
   This update adds new makepkg options and fixes a bug:

FILELIST.TXT

@@ -1,20 +1,20 @@
-Fri Sep 27 21:14:15 UTC 2024
+Tue Oct  1 18:12:46 UTC 2024
 
 Here is the file list for this directory.  If you are using a 
 mirror site and find missing or extra files in the disk 
 subdirectories, please have the archive administrator refresh
 the mirror.
 
-drwxr-xr-x  12 root root      4096 2024-09-27 21:10 .
+drwxr-xr-x  12 root root      4096 2024-10-01 18:01 .
 -rw-r--r--   1 root root      5767 2022-02-02 22:44 ./ANNOUNCE.15.0
 -rw-r--r--   1 root root     16609 2022-03-30 19:03 ./CHANGES_AND_HINTS.TXT
--rw-r--r--   1 root root   1256597 2024-09-26 18:32 ./CHECKSUMS.md5
+-rw-r--r--   1 root root   1258796 2024-09-27 21:14 ./CHECKSUMS.md5
--rw-r--r--   1 root root       195 2024-09-26 18:32 ./CHECKSUMS.md5.asc
+-rw-r--r--   1 root root       195 2024-09-27 21:14 ./CHECKSUMS.md5.asc
 -rw-r--r--   1 root root     17976 1994-06-10 02:28 ./COPYING
 -rw-r--r--   1 root root     35147 2007-06-30 04:21 ./COPYING3
 -rw-r--r--   1 root root     19573 2016-06-23 20:08 ./COPYRIGHT.TXT
 -rw-r--r--   1 root root       616 2006-10-02 04:37 ./CRYPTO_NOTICE.TXT
--rw-r--r--   1 root root   2161274 2024-09-27 21:10 ./ChangeLog.txt
+-rw-r--r--   1 root root   2164209 2024-10-01 18:07 ./ChangeLog.txt
 drwxr-xr-x   3 root root      4096 2013-03-20 22:17 ./EFI
 drwxr-xr-x   2 root root      4096 2022-02-02 08:21 ./EFI/BOOT
 -rw-r--r--   1 root root   1187840 2021-06-15 19:16 ./EFI/BOOT/bootx64.efi
@@ -25,7 +25,7 @@ drwxr-xr-x   2 root root      4096 2022-02-02 08:21 ./EFI/BOOT
 -rwxr-xr-x   1 root root      2504 2019-07-05 18:54 ./EFI/BOOT/make-grub.sh
 -rw-r--r--   1 root root     10722 2013-09-21 19:02 ./EFI/BOOT/osdetect.cfg
 -rw-r--r--   1 root root      1273 2013-08-12 21:08 ./EFI/BOOT/tools.cfg
--rw-r--r--   1 root root   1646980 2024-09-26 18:31 ./FILELIST.TXT
+-rw-r--r--   1 root root   1649874 2024-09-27 21:14 ./FILELIST.TXT
 -rw-r--r--   1 root root      1572 2012-08-29 18:27 ./GPG-KEY
 -rw-r--r--   1 root root    864745 2022-02-02 08:25 ./PACKAGES.TXT
 -rw-r--r--   1 root root      8034 2022-02-02 03:36 ./README.TXT
@@ -39,12 +39,12 @@ drwxr-xr-x   2 root root      4096 2022-02-02 08:21 ./EFI/BOOT
 -rw-r--r--   1 root root     17294 2008-12-08 18:13 ./SPEAK_INSTALL.TXT
 -rw-r--r--   1 root root     57187 2022-02-01 19:37 ./Slackware-HOWTO
 -rw-r--r--   1 root root      8700 2022-01-26 05:44 ./UPGRADE.TXT
-drwxr-xr-x  19 root root      4096 2024-06-06 19:42 ./extra
+drwxr-xr-x  19 root root      4096 2024-10-01 18:12 ./extra
--rw-r--r--   1 root root     56343 2024-06-06 19:42 ./extra/CHECKSUMS.md5
+-rw-r--r--   1 root root     56343 2024-10-01 18:12 ./extra/CHECKSUMS.md5
--rw-r--r--   1 root root       195 2024-06-06 19:42 ./extra/CHECKSUMS.md5.asc
+-rw-r--r--   1 root root       195 2024-10-01 18:12 ./extra/CHECKSUMS.md5.asc
--rw-r--r--   1 root root     70733 2024-06-06 19:42 ./extra/FILE_LIST
+-rw-r--r--   1 root root     70733 2024-10-01 18:12 ./extra/FILE_LIST
--rw-r--r--   1 root root   3060780 2024-06-06 19:42 ./extra/MANIFEST.bz2
+-rw-r--r--   1 root root   3055089 2024-10-01 18:12 ./extra/MANIFEST.bz2
--rw-r--r--   1 root root     37488 2024-06-06 19:42 ./extra/PACKAGES.TXT
+-rw-r--r--   1 root root     37488 2024-10-01 18:12 ./extra/PACKAGES.TXT
 -rw-r--r--   1 root root       149 2002-02-09 00:18 ./extra/README.TXT
 drwxr-xr-x   2 root root     20480 2020-05-26 20:38 ./extra/aspell-word-lists
 -rw-r--r--   1 root root       171 2016-06-06 20:10 ./extra/aspell-word-lists/aspell-af-0.50_0-x86_64-5.txt
@@ -348,9 +348,9 @@ drwxr-xr-x   2 root root      4096 2018-02-27 06:13 ./extra/google-chrome
 -rwxr-xr-x   1 root root      4168 2019-09-18 22:18 ./extra/google-chrome/google-chrome.SlackBuild
 -rw-r--r--   1 root root       840 2018-02-27 06:13 ./extra/google-chrome/slack-desc
 lrwxrwxrwx   1 root root        11 2012-07-30 20:41 ./extra/java -> source/java
--rw-r--r--   1 root root       346 2024-02-17 20:11 ./extra/llvm-17.0.6-x86_64-1_slack15.0.txt
+-rw-r--r--   1 root root       346 2024-09-29 17:36 ./extra/llvm-17.0.6-x86_64-2_slack15.0.txt
--rw-r--r--   1 root root 123154048 2024-02-17 20:11 ./extra/llvm-17.0.6-x86_64-1_slack15.0.txz
+-rw-r--r--   1 root root 123164204 2024-09-29 17:36 ./extra/llvm-17.0.6-x86_64-2_slack15.0.txz
--rw-r--r--   1 root root       163 2024-02-17 20:11 ./extra/llvm-17.0.6-x86_64-1_slack15.0.txz.asc
+-rw-r--r--   1 root root       195 2024-09-29 17:36 ./extra/llvm-17.0.6-x86_64-2_slack15.0.txz.asc
 -rw-r--r--   1 root root       315 2024-02-18 20:08 ./extra/llvm13-compat-13.0.0-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root  30271960 2024-02-18 20:08 ./extra/llvm13-compat-13.0.0-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2024-02-18 20:08 ./extra/llvm13-compat-13.0.0-x86_64-1_slack15.0.txz.asc
@@ -597,7 +597,7 @@ drwxr-xr-x   3 root root      4096 2024-02-17 19:12 ./extra/source/llvm
 -rw-r--r--   1 root root       281 2022-06-28 03:34 ./extra/source/llvm/lldb.32-bit.link.libatomic.diff.gz
 -rw-r--r--   1 root root  59298244 2023-11-28 10:33 ./extra/source/llvm/llvm-17.0.6.src.tar.xz
 -rw-r--r--   1 root root       438 2023-11-28 10:33 ./extra/source/llvm/llvm-17.0.6.src.tar.xz.sig
--rwxr-xr-x   1 root root     13258 2024-02-17 19:12 ./extra/source/llvm/llvm.SlackBuild
+-rwxr-xr-x   1 root root     13286 2024-09-29 16:39 ./extra/source/llvm/llvm.SlackBuild
 -rw-r--r--   1 root root      2175 2023-11-28 19:24 ./extra/source/llvm/llvm.url
 drwxr-xr-x   2 root root      4096 2023-03-19 05:00 ./extra/source/llvm/missing-runtime-modules
 -rw-r--r--   1 root root      4005 2023-02-21 06:00 ./extra/source/llvm/missing-runtime-modules/HandleFlags.cmake
@@ -832,13 +832,13 @@ drwxr-xr-x   2 root root      4096 2022-12-17 19:52 ./pasture/source/samba
 -rw-r--r--   1 root root      7921 2018-04-29 17:31 ./pasture/source/samba/smb.conf.default
 -rw-r--r--   1 root root      7933 2018-01-14 20:41 ./pasture/source/samba/smb.conf.default.orig
 -rw-r--r--   1 root root       536 2017-03-23 19:18 ./pasture/source/samba/smb.conf.diff.gz
-drwxr-xr-x   4 root root      4096 2024-09-27 21:14 ./patches
+drwxr-xr-x   4 root root      4096 2024-10-01 18:12 ./patches
--rw-r--r--   1 root root    136957 2024-09-27 21:14 ./patches/CHECKSUMS.md5
+-rw-r--r--   1 root root    141044 2024-10-01 18:12 ./patches/CHECKSUMS.md5
--rw-r--r--   1 root root       195 2024-09-27 21:14 ./patches/CHECKSUMS.md5.asc
+-rw-r--r--   1 root root       195 2024-10-01 18:12 ./patches/CHECKSUMS.md5.asc
--rw-r--r--   1 root root    188969 2024-09-27 21:14 ./patches/FILE_LIST
+-rw-r--r--   1 root root    194490 2024-10-01 18:12 ./patches/FILE_LIST
--rw-r--r--   1 root root  18208782 2024-09-27 21:14 ./patches/MANIFEST.bz2
+-rw-r--r--   1 root root  18271417 2024-10-01 18:12 ./patches/MANIFEST.bz2
--rw-r--r--   1 root root     94800 2024-09-27 21:14 ./patches/PACKAGES.TXT
+-rw-r--r--   1 root root     99128 2024-10-01 18:12 ./patches/PACKAGES.TXT
-drwxr-xr-x   7 root root     32768 2024-09-27 21:14 ./patches/packages
+drwxr-xr-x   7 root root     32768 2024-10-01 18:12 ./patches/packages
 -rw-r--r--   1 root root       360 2023-09-26 19:28 ./patches/packages/Cython-0.29.36-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root   2389564 2023-09-26 19:28 ./patches/packages/Cython-0.29.36-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2023-09-26 19:28 ./patches/packages/Cython-0.29.36-x86_64-1_slack15.0.txz.asc
@@ -878,12 +878,15 @@ drwxr-xr-x   7 root root     32768 2024-09-27 21:14 ./patches/packages
 -rw-r--r--   1 root root       523 2024-03-29 02:24 ./patches/packages/coreutils-9.5-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root   2796940 2024-03-29 02:24 ./patches/packages/coreutils-9.5-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-03-29 02:24 ./patches/packages/coreutils-9.5-x86_64-1_slack15.0.txz.asc
+-rw-r--r--   1 root root       252 2024-09-30 17:58 ./patches/packages/cryfs-0.10.3-x86_64-5_slack15.0.txt
+-rw-r--r--   1 root root    680044 2024-09-30 17:58 ./patches/packages/cryfs-0.10.3-x86_64-5_slack15.0.txz
+-rw-r--r--   1 root root       195 2024-09-30 17:58 ./patches/packages/cryfs-0.10.3-x86_64-5_slack15.0.txz.asc
 -rw-r--r--   1 root root       642 2024-06-18 20:22 ./patches/packages/cups-2.4.10-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root   1594340 2024-06-18 20:22 ./patches/packages/cups-2.4.10-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-06-18 20:22 ./patches/packages/cups-2.4.10-x86_64-1_slack15.0.txz.asc
--rw-r--r--   1 root root       416 2023-05-19 18:13 ./patches/packages/cups-filters-1.28.17-x86_64-1_slack15.0.txt
+-rw-r--r--   1 root root       416 2024-09-30 21:32 ./patches/packages/cups-filters-1.28.17-x86_64-2_slack15.0.txt
--rw-r--r--   1 root root    827024 2023-05-19 18:13 ./patches/packages/cups-filters-1.28.17-x86_64-1_slack15.0.txz
+-rw-r--r--   1 root root    826896 2024-09-30 21:32 ./patches/packages/cups-filters-1.28.17-x86_64-2_slack15.0.txz
--rw-r--r--   1 root root       163 2023-05-19 18:13 ./patches/packages/cups-filters-1.28.17-x86_64-1_slack15.0.txz.asc
+-rw-r--r--   1 root root       195 2024-09-30 21:32 ./patches/packages/cups-filters-1.28.17-x86_64-2_slack15.0.txz.asc
 -rw-r--r--   1 root root       552 2024-09-18 17:29 ./patches/packages/curl-8.10.1-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root   1293160 2024-09-18 17:29 ./patches/packages/curl-8.10.1-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-09-18 17:29 ./patches/packages/curl-8.10.1-x86_64-1_slack15.0.txz.asc
@@ -908,6 +911,9 @@ drwxr-xr-x   7 root root     32768 2024-09-27 21:14 ./patches/packages
 -rw-r--r--   1 root root       481 2024-06-22 19:19 ./patches/packages/emacs-29.4-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root  44042948 2024-06-22 19:19 ./patches/packages/emacs-29.4-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-06-22 19:19 ./patches/packages/emacs-29.4-x86_64-1_slack15.0.txz.asc
+-rw-r--r--   1 root root       572 2024-09-30 18:03 ./patches/packages/espeak-ng-1.50-x86_64-4_slack15.0.txt
+-rw-r--r--   1 root root   2452148 2024-09-30 18:03 ./patches/packages/espeak-ng-1.50-x86_64-4_slack15.0.txz
+-rw-r--r--   1 root root       195 2024-09-30 18:03 ./patches/packages/espeak-ng-1.50-x86_64-4_slack15.0.txz.asc
 -rw-r--r--   1 root root       301 2024-09-04 18:07 ./patches/packages/expat-2.6.3-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root    136224 2024-09-04 18:07 ./patches/packages/expat-2.6.3-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-09-04 18:07 ./patches/packages/expat-2.6.3-x86_64-1_slack15.0.txz.asc
@@ -1028,6 +1034,9 @@ drwxr-xr-x   7 root root     32768 2024-09-27 21:14 ./patches/packages
 -rw-r--r--   1 root root       214 2024-02-20 20:59 ./patches/packages/libuv-1.48.0-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root    124380 2024-02-20 20:59 ./patches/packages/libuv-1.48.0-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2024-02-20 20:59 ./patches/packages/libuv-1.48.0-x86_64-1_slack15.0.txz.asc
+-rw-r--r--   1 root root       362 2024-09-30 18:05 ./patches/packages/libvncserver-0.9.13-x86_64-4_slack15.0.txt
+-rw-r--r--   1 root root    238776 2024-09-30 18:05 ./patches/packages/libvncserver-0.9.13-x86_64-4_slack15.0.txz
+-rw-r--r--   1 root root       195 2024-09-30 18:05 ./patches/packages/libvncserver-0.9.13-x86_64-4_slack15.0.txz.asc
 -rw-r--r--   1 root root       434 2023-09-30 19:18 ./patches/packages/libvpx-1.12.0-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root   1504464 2023-09-30 19:18 ./patches/packages/libvpx-1.12.0-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2023-09-30 19:18 ./patches/packages/libvpx-1.12.0-x86_64-1_slack15.0.txz.asc
@@ -1059,9 +1068,15 @@ drwxr-xr-x   2 root root      4096 2024-06-16 21:36 ./patches/packages/linux-5.1
 -rw-r--r--   1 root root       369 2024-08-09 18:32 ./patches/packages/mariadb-10.5.26-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root  30050548 2024-08-09 18:32 ./patches/packages/mariadb-10.5.26-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-08-09 18:32 ./patches/packages/mariadb-10.5.26-x86_64-1_slack15.0.txz.asc
--rw-r--r--   1 root root       570 2024-09-03 17:27 ./patches/packages/mozilla-firefox-115.15.0esr-x86_64-1_slack15.0.txt
+-rw-r--r--   1 root root       485 2024-09-30 18:07 ./patches/packages/marisa-0.2.6-x86_64-5_slack15.0.txt
--rw-r--r--   1 root root  61482192 2024-09-03 17:27 ./patches/packages/mozilla-firefox-115.15.0esr-x86_64-1_slack15.0.txz
+-rw-r--r--   1 root root    158028 2024-09-30 18:07 ./patches/packages/marisa-0.2.6-x86_64-5_slack15.0.txz
--rw-r--r--   1 root root       195 2024-09-03 17:27 ./patches/packages/mozilla-firefox-115.15.0esr-x86_64-1_slack15.0.txz.asc
+-rw-r--r--   1 root root       195 2024-09-30 18:07 ./patches/packages/marisa-0.2.6-x86_64-5_slack15.0.txz.asc
+-rw-r--r--   1 root root       512 2024-09-30 18:09 ./patches/packages/mlt-7.4.0-x86_64-2_slack15.0.txt
+-rw-r--r--   1 root root    658260 2024-09-30 18:09 ./patches/packages/mlt-7.4.0-x86_64-2_slack15.0.txz
+-rw-r--r--   1 root root       195 2024-09-30 18:09 ./patches/packages/mlt-7.4.0-x86_64-2_slack15.0.txz.asc
+-rw-r--r--   1 root root       570 2024-10-01 03:16 ./patches/packages/mozilla-firefox-115.16.0esr-x86_64-1_slack15.0.txt
+-rw-r--r--   1 root root  61481332 2024-10-01 03:16 ./patches/packages/mozilla-firefox-115.16.0esr-x86_64-1_slack15.0.txz
+-rw-r--r--   1 root root       195 2024-10-01 03:16 ./patches/packages/mozilla-firefox-115.16.0esr-x86_64-1_slack15.0.txz.asc
 -rw-r--r--   1 root root       564 2023-01-06 19:37 ./patches/packages/mozilla-nss-3.87-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root   1838968 2023-01-06 19:37 ./patches/packages/mozilla-nss-3.87-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2023-01-06 19:37 ./patches/packages/mozilla-nss-3.87-x86_64-1_slack15.0.txz.asc
@@ -1153,6 +1168,9 @@ drwxr-xr-x   2 root root      4096 2024-06-08 19:45 ./patches/packages/old-linux
 -rw-r--r--   1 root root       226 2024-02-29 18:12 ./patches/packages/openjpeg-2.5.2-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root    285780 2024-02-29 18:12 ./patches/packages/openjpeg-2.5.2-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2024-02-29 18:12 ./patches/packages/openjpeg-2.5.2-x86_64-1_slack15.0.txz.asc
+-rw-r--r--   1 root root       535 2024-09-30 18:10 ./patches/packages/openobex-1.7.2-x86_64-6_slack15.0.txt
+-rw-r--r--   1 root root    174428 2024-09-30 18:10 ./patches/packages/openobex-1.7.2-x86_64-6_slack15.0.txz
+-rw-r--r--   1 root root       195 2024-09-30 18:10 ./patches/packages/openobex-1.7.2-x86_64-6_slack15.0.txz.asc
 -rw-r--r--   1 root root       672 2024-07-08 17:59 ./patches/packages/openssh-9.8p1-x86_64-3_slack15.0.txt
 -rw-r--r--   1 root root   1102444 2024-07-08 17:59 ./patches/packages/openssh-9.8p1-x86_64-3_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-07-08 17:59 ./patches/packages/openssh-9.8p1-x86_64-3_slack15.0.txz.asc
@@ -1174,9 +1192,9 @@ drwxr-xr-x   2 root root      4096 2024-06-08 19:45 ./patches/packages/old-linux
 -rw-r--r--   1 root root       457 2022-06-04 18:23 ./patches/packages/pidgin-2.14.10-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root   5828060 2022-06-04 18:23 ./patches/packages/pidgin-2.14.10-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2022-06-04 18:23 ./patches/packages/pidgin-2.14.10-x86_64-1_slack15.0.txz.asc
--rw-r--r--   1 root root       672 2024-09-27 21:07 ./patches/packages/pkgtools-15.0-noarch-43_slack15.0.txt
+-rw-r--r--   1 root root       672 2024-09-28 22:11 ./patches/packages/pkgtools-15.0-noarch-44_slack15.0.txt
--rw-r--r--   1 root root    198228 2024-09-27 21:07 ./patches/packages/pkgtools-15.0-noarch-43_slack15.0.txz
+-rw-r--r--   1 root root    198256 2024-09-28 22:11 ./patches/packages/pkgtools-15.0-noarch-44_slack15.0.txz
--rw-r--r--   1 root root       195 2024-09-27 21:07 ./patches/packages/pkgtools-15.0-noarch-43_slack15.0.txz.asc
+-rw-r--r--   1 root root       195 2024-09-28 22:11 ./patches/packages/pkgtools-15.0-noarch-44_slack15.0.txz.asc
 -rw-r--r--   1 root root       378 2024-08-27 18:56 ./patches/packages/plasma-workspace-5.23.5-x86_64-4_slack15.0.txt
 -rw-r--r--   1 root root  10512876 2024-08-27 18:56 ./patches/packages/plasma-workspace-5.23.5-x86_64-4_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-08-27 18:56 ./patches/packages/plasma-workspace-5.23.5-x86_64-4_slack15.0.txz.asc
@@ -1228,6 +1246,9 @@ drwxr-xr-x   2 root root      4096 2024-06-08 19:45 ./patches/packages/old-linux
 -rw-r--r--   1 root root       583 2024-05-09 18:12 ./patches/packages/sg3_utils-1.47-x86_64-2_slack15.0.txt
 -rw-r--r--   1 root root    904816 2024-05-09 18:12 ./patches/packages/sg3_utils-1.47-x86_64-2_slack15.0.txz
 -rw-r--r--   1 root root       195 2024-05-09 18:12 ./patches/packages/sg3_utils-1.47-x86_64-2_slack15.0.txz.asc
+-rw-r--r--   1 root root       493 2024-09-30 18:12 ./patches/packages/spirv-llvm-translator-13.0.0-x86_64-2_slack15.0.txt
+-rw-r--r--   1 root root    738592 2024-09-30 18:12 ./patches/packages/spirv-llvm-translator-13.0.0-x86_64-2_slack15.0.txz
+-rw-r--r--   1 root root       195 2024-09-30 18:12 ./patches/packages/spirv-llvm-translator-13.0.0-x86_64-2_slack15.0.txz.asc
 -rw-r--r--   1 root root       442 2023-12-30 19:25 ./patches/packages/sudo-1.9.15p5-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root   1307496 2023-12-30 19:25 ./patches/packages/sudo-1.9.15p5-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2023-12-30 19:25 ./patches/packages/sudo-1.9.15p5-x86_64-1_slack15.0.txz.asc
@@ -1303,7 +1324,7 @@ drwxr-xr-x   2 root root      4096 2024-06-08 19:45 ./patches/packages/old-linux
 -rw-r--r--   1 root root       463 2023-04-05 18:16 ./patches/packages/zstd-1.5.5-x86_64-1_slack15.0.txt
 -rw-r--r--   1 root root    459652 2023-04-05 18:16 ./patches/packages/zstd-1.5.5-x86_64-1_slack15.0.txz
 -rw-r--r--   1 root root       163 2023-04-05 18:16 ./patches/packages/zstd-1.5.5-x86_64-1_slack15.0.txz.asc
-drwxr-xr-x 127 root root      4096 2024-09-27 21:09 ./patches/source
+drwxr-xr-x 134 root root      4096 2024-10-01 16:59 ./patches/source
 drwxr-xr-x   2 root root      4096 2023-09-26 19:22 ./patches/source/Cython
 -rw-r--r--   1 root root   1623580 2023-07-04 19:24 ./patches/source/Cython/Cython-0.29.36.tar.lz
 -rwxr-xr-x   1 root root      3041 2023-09-26 19:23 ./patches/source/Cython/Cython.SlackBuild
@@ -1405,11 +1426,18 @@ drwxr-xr-x   2 root root      4096 2024-03-29 01:28 ./patches/source/coreutils
 -rw-r--r--   1 root root       327 2016-01-29 19:35 ./patches/source/coreutils/doinst.sh.gz
 -rw-r--r--   1 root root       237 2021-09-25 00:47 ./patches/source/coreutils/no_ls_quoting.patch.gz
 -rw-r--r--   1 root root       980 2018-02-27 06:13 ./patches/source/coreutils/slack-desc
+drwxr-xr-x   2 root root      4096 2022-01-27 19:29 ./patches/source/cryfs
+-rw-r--r--   1 root root       537 2021-08-14 17:54 ./patches/source/cryfs/041b5baea5a4efceff33df2f316646b47a1cd7c0.patch.gz
+-rw-r--r--   1 root root      3450 2021-08-14 17:54 ./patches/source/cryfs/27587ea1acec5f939a31217f1c43953378f18821.patch.gz
+-rw-r--r--   1 root root   7835691 2021-04-02 17:08 ./patches/source/cryfs/cryfs-0.10.3.tar.lz
+-rwxr-xr--   1 root root      4948 2024-09-30 17:51 ./patches/source/cryfs/cryfs.SlackBuild
+-rw-r--r--   1 root root        31 2020-09-01 19:27 ./patches/source/cryfs/cryfs.url
+-rw-r--r--   1 root root       705 2020-11-01 20:04 ./patches/source/cryfs/slack-desc
 drwxr-xr-x   2 root root      4096 2024-06-18 20:21 ./patches/source/cups
 drwxr-xr-x   2 root root      4096 2023-05-19 18:08 ./patches/source/cups-filters
 -rw-r--r--   1 root root      1831 2023-05-19 18:08 ./patches/source/cups-filters/CVE-2023-24805.patch.gz
 -rw-r--r--   1 root root   1230865 2023-01-25 01:38 ./patches/source/cups-filters/cups-filters-1.28.17.tar.lz
--rwxr-xr-x   1 root root      4647 2023-05-19 18:11 ./patches/source/cups-filters/cups-filters.SlackBuild
+-rwxr-xr-x   1 root root      4647 2024-09-30 21:30 ./patches/source/cups-filters/cups-filters.SlackBuild
 -rw-r--r--   1 root root        51 2014-07-21 02:53 ./patches/source/cups-filters/cups-filters.url
 -rw-r--r--   1 root root       339 2018-01-08 22:54 ./patches/source/cups-filters/doinst.sh.gz
 -rw-r--r--   1 root root       908 2018-02-27 06:12 ./patches/source/cups-filters/slack-desc
@@ -1492,6 +1520,11 @@ drwxr-xr-x   2 root root      4096 2024-06-22 19:17 ./patches/source/emacs
 -rw-r--r--   1 root root       520 2024-06-22 15:10 ./patches/source/emacs/emacs-29.4.tar.xz.sig
 -rwxr-xr-x   1 root root      7326 2024-06-22 19:17 ./patches/source/emacs/emacs.SlackBuild
 -rw-r--r--   1 root root       559 2021-01-12 18:45 ./patches/source/emacs/slack-desc
+drwxr-xr-x   2 root root      4096 2021-02-13 05:31 ./patches/source/espeak-ng
+-rw-r--r--   1 root root   9554957 2019-11-29 16:50 ./patches/source/espeak-ng/espeak-ng-1.50.tar.lz
+-rwxr-xr-x   1 root root      3933 2024-09-30 18:03 ./patches/source/espeak-ng/espeak-ng.SlackBuild
+-rw-r--r--   1 root root        39 2020-07-29 01:37 ./patches/source/espeak-ng/espeak-ng.url
+-rw-r--r--   1 root root      1063 2020-07-29 02:35 ./patches/source/espeak-ng/slack-desc
 drwxr-xr-x   2 root root      4096 2024-09-04 18:07 ./patches/source/expat
 -rw-r--r--   1 root root    484072 2024-09-04 10:46 ./patches/source/expat/expat-2.6.3.tar.lz
 -rw-r--r--   1 root root       833 2024-09-04 10:46 ./patches/source/expat/expat-2.6.3.tar.lz.asc
@@ -1855,6 +1888,10 @@ drwxr-xr-x   2 root root      4096 2024-02-08 18:53 ./patches/source/libuv
 -rwxr-xr-x   1 root root      4301 2024-02-20 20:56 ./patches/source/libuv/libuv.SlackBuild
 -rw-r--r--   1 root root        28 2020-02-20 19:27 ./patches/source/libuv/libuv.url
 -rw-r--r--   1 root root       667 2020-02-20 19:34 ./patches/source/libuv/slack-desc
+drwxr-xr-x   2 root root      4096 2021-02-13 05:32 ./patches/source/libvncserver
+-rw-r--r--   1 root root    420944 2020-06-13 18:49 ./patches/source/libvncserver/LibVNCServer-0.9.13.tar.lz
+-rwxr-xr-x   1 root root      4474 2024-09-30 18:05 ./patches/source/libvncserver/libvncserver.SlackBuild
+-rw-r--r--   1 root root       822 2018-02-27 06:12 ./patches/source/libvncserver/slack-desc
 drwxr-xr-x   2 root root      4096 2023-09-30 19:02 ./patches/source/libvpx
 -rw-r--r--   1 root root      1708 2023-09-28 21:07 ./patches/source/libvpx/0001-Relax-ABI-check.patch
 -rw-r--r--   1 root root      3407 2023-09-28 21:07 ./patches/source/libvpx/0002-encode_api_test-add-ConfigResizeChangeThreadCount.patch
@@ -1914,7 +1951,18 @@ drwxr-xr-x   2 root root      4096 2024-08-09 18:13 ./patches/source/mariadb
 -rw-r--r--   1 root root        34 2015-05-07 18:51 ./patches/source/mariadb/mirror.url
 -rw-r--r--   1 root root      1208 2021-04-23 17:54 ./patches/source/mariadb/rc.mysqld.gz
 -rw-r--r--   1 root root       824 2018-02-27 06:12 ./patches/source/mariadb/slack-desc
-drwxr-xr-x   3 root root      4096 2024-09-03 16:41 ./patches/source/mozilla-firefox
+drwxr-xr-x   2 root root      4096 2021-02-13 05:32 ./patches/source/marisa
+-rw-r--r--   1 root root    111401 2020-06-14 08:41 ./patches/source/marisa/marisa-trie-0.2.6.tar.lz
+-rwxr-xr-x   1 root root      4743 2024-09-30 18:06 ./patches/source/marisa/marisa.SlackBuild
+-rw-r--r--   1 root root        38 2020-12-08 18:39 ./patches/source/marisa/marisa.url
+-rw-r--r--   1 root root       972 2020-11-28 00:57 ./patches/source/marisa/slack-desc
+drwxr-xr-x   2 root root      4096 2021-12-26 19:18 ./patches/source/mlt
+-rw-r--r--   1 root root    825193 2021-12-19 21:07 ./patches/source/mlt/mlt-7.4.0.tar.lz
+-rwxr-xr--   1 root root      3844 2024-09-30 18:08 ./patches/source/mlt/mlt.SlackBuild
+-rw-r--r--   1 root root        35 2019-02-10 13:42 ./patches/source/mlt/mlt.deps
+-rw-r--r--   1 root root        36 2020-09-29 01:18 ./patches/source/mlt/mlt.url
+-rw-r--r--   1 root root       963 2020-11-01 20:04 ./patches/source/mlt/slack-desc
+drwxr-xr-x   3 root root      4096 2024-10-01 02:28 ./patches/source/mozilla-firefox
 -rw-r--r--   1 root root       693 2021-03-22 17:58 ./patches/source/mozilla-firefox/0027-LTO-Only-enable-LTO-for-Rust-when-complete-build-use.patch.gz
 drwxr-xr-x   5 root root      4096 2021-08-13 18:36 ./patches/source/mozilla-firefox/build-deps
 -rwxr-xr-x   1 root root      2003 2023-07-23 19:20 ./patches/source/mozilla-firefox/build-deps.sh
@@ -1932,8 +1980,8 @@ drwxr-xr-x   2 root root      4096 2024-08-21 20:20 ./patches/source/mozilla-fir
 -rw-r--r--   1 root root        86 2019-07-08 21:02 ./patches/source/mozilla-firefox/build-deps/nodejs/nodejs.url
 -rwxr-xr-x   1 root root       840 2018-03-13 12:55 ./patches/source/mozilla-firefox/fetch-and-repack.sh
 -rw-r--r--   1 root root       330 2019-07-08 18:41 ./patches/source/mozilla-firefox/ff.ui.scrollToClick.diff.gz
--rw-r--r--   1 root root 507920832 2024-09-02 11:57 ./patches/source/mozilla-firefox/firefox-115.15.0esr.source.tar.xz
+-rw-r--r--   1 root root 515133700 2024-09-30 12:55 ./patches/source/mozilla-firefox/firefox-115.16.0esr.source.tar.xz
--rw-r--r--   1 root root       833 2024-09-02 11:57 ./patches/source/mozilla-firefox/firefox-115.15.0esr.source.tar.xz.asc
+-rw-r--r--   1 root root       833 2024-09-30 12:55 ./patches/source/mozilla-firefox/firefox-115.16.0esr.source.tar.xz.asc
 -rw-r--r--   1 root root      2748 2017-12-04 21:30 ./patches/source/mozilla-firefox/firefox.desktop
 -rw-r--r--   1 root root       327 2008-06-17 17:19 ./patches/source/mozilla-firefox/firefox.moz_plugin_path.diff.gz
 -rw-r--r--   1 root root       518 2021-03-15 17:43 ./patches/source/mozilla-firefox/gkrust.a.no.networking.check.diff.gz
@@ -2170,6 +2218,10 @@ drwxr-xr-x   2 root root      4096 2024-02-29 18:11 ./patches/source/openjpeg
 -rwxr-xr-x   1 root root      4283 2024-02-26 19:24 ./patches/source/openjpeg/openjpeg.SlackBuild
 -rw-r--r--   1 root root       387 2017-10-04 19:22 ./patches/source/openjpeg/openjpeg2_remove-thirdparty.patch.gz
 -rw-r--r--   1 root root       682 2018-02-27 06:12 ./patches/source/openjpeg/slack-desc
+drwxr-xr-x   2 root root      4096 2021-02-13 05:32 ./patches/source/openobex
+-rw-r--r--   1 root root     99552 2016-04-07 21:06 ./patches/source/openobex/openobex-1.7.2-Source.tar.xz
+-rwxr-xr-x   1 root root      4555 2024-09-30 18:10 ./patches/source/openobex/openobex.SlackBuild
+-rw-r--r--   1 root root       991 2018-02-27 06:13 ./patches/source/openobex/slack-desc
 drwxr-xr-x   2 root root      4096 2024-07-07 17:30 ./patches/source/openssh
 -rw-r--r--   1 root root      1697 2024-07-07 18:17 ./patches/source/openssh/doinst.sh
 -rw-r--r--   1 root root   1910393 2024-07-01 07:34 ./patches/source/openssh/openssh-9.8p1.tar.gz
@@ -2270,12 +2322,12 @@ drwxr-xr-x   2 root root      4096 2019-10-04 06:20 ./patches/source/pkgtools/ma
 -rw-r--r--   1 root root      2518 2021-04-19 18:25 ./patches/source/pkgtools/manpages/pkgtool.8
 -rw-r--r--   1 root root      4049 2020-04-01 22:09 ./patches/source/pkgtools/manpages/removepkg.8
 -rw-r--r--   1 root root      2962 2018-06-08 19:56 ./patches/source/pkgtools/manpages/upgradepkg.8
--rwxr-xr-x   1 root root      3764 2024-09-27 20:52 ./patches/source/pkgtools/pkgtools.SlackBuild
+-rwxr-xr-x   1 root root      3764 2024-09-28 22:10 ./patches/source/pkgtools/pkgtools.SlackBuild
 drwxr-xr-x   2 root root      4096 2021-02-16 21:37 ./patches/source/pkgtools/scripts
 -rw-r--r--   1 root root      3610 2021-04-24 18:44 ./patches/source/pkgtools/scripts/explodepkg
 -rw-r--r--   1 root root     28853 2021-05-21 01:30 ./patches/source/pkgtools/scripts/installpkg
 -rw-r--r--   1 root root     13674 2021-04-24 18:44 ./patches/source/pkgtools/scripts/makebootdisk
--rw-r--r--   1 root root     18083 2024-09-27 21:05 ./patches/source/pkgtools/scripts/makepkg
+-rw-r--r--   1 root root     18339 2024-09-28 22:08 ./patches/source/pkgtools/scripts/makepkg
 -rw-r--r--   1 root root      4714 2021-04-24 18:44 ./patches/source/pkgtools/scripts/pkgdiff
 -rw-r--r--   1 root root     21940 2021-04-24 18:45 ./patches/source/pkgtools/scripts/pkgtool
 -rw-r--r--   1 root root     17090 2021-04-24 18:45 ./patches/source/pkgtools/scripts/removepkg
@@ -2496,6 +2548,13 @@ drwxr-xr-x   2 root root      4096 2024-05-09 18:09 ./patches/source/sg3_utils
 -rwxr-xr-x   1 root root      4273 2024-05-09 18:11 ./patches/source/sg3_utils/sg3_utils.SlackBuild
 -rw-r--r--   1 root root        25 2010-11-10 05:18 ./patches/source/sg3_utils/sg3_utils.url
 -rw-r--r--   1 root root      1040 2018-02-27 06:12 ./patches/source/sg3_utils/slack-desc
+drwxr-xr-x   2 root root      4096 2021-10-16 17:57 ./patches/source/spirv-llvm-translator
+-rw-r--r--   1 root root   1919440 2021-10-16 17:56 ./patches/source/spirv-llvm-translator/SPIRV-Headers.tar.lz
+-rw-r--r--   1 root root    607398 2021-10-15 21:15 ./patches/source/spirv-llvm-translator/SPIRV-LLVM-Translator-13.0.0.tar.lz
+-rw-r--r--   1 root root        54 2021-10-16 16:53 ./patches/source/spirv-llvm-translator/SPIRV-LLVM-Translator.url
+-rwxr-xr-x   1 root root      2094 2021-10-15 03:16 ./patches/source/spirv-llvm-translator/fetch-SPIRV-LLVM-Translator.sh
+-rw-r--r--   1 root root       962 2021-06-14 13:13 ./patches/source/spirv-llvm-translator/slack-desc
+-rwxr-xr-x   1 root root      4358 2024-09-30 18:11 ./patches/source/spirv-llvm-translator/spirv-llvm-translator.SlackBuild
 drwxr-xr-x   2 root root      4096 2023-12-30 19:23 ./patches/source/sudo
 -rw-r--r--   1 root root       275 2004-09-19 00:25 ./patches/source/sudo/doinst.sh.gz
 -rw-r--r--   1 root root       894 2018-02-27 06:12 ./patches/source/sudo/slack-desc
@@ -17236,16 +17295,16 @@ drwxr-xr-x  2 root root      4096 2021-02-13 05:32 ./source/y/nethack
 -rwxr-xr-x  1 root root      4998 2021-02-13 05:32 ./source/y/nethack/nethack.SlackBuild
 -rw-r--r--  1 root root        59 2020-12-30 20:25 ./source/y/nethack/nethack.url
 -rw-r--r--  1 root root      1031 2020-12-30 21:50 ./source/y/nethack/slack-desc
-drwxr-xr-x  4 root root      4096 2024-09-06 19:25 ./testing
+drwxr-xr-x  4 root root      4096 2024-10-01 18:12 ./testing
--rw-r--r--  1 root root      3188 2024-09-06 19:25 ./testing/CHECKSUMS.md5
+-rw-r--r--  1 root root      3188 2024-10-01 18:12 ./testing/CHECKSUMS.md5
--rw-r--r--  1 root root       195 2024-09-06 19:25 ./testing/CHECKSUMS.md5.asc
+-rw-r--r--  1 root root       195 2024-10-01 18:12 ./testing/CHECKSUMS.md5.asc
--rw-r--r--  1 root root      4185 2024-09-06 19:25 ./testing/FILE_LIST
+-rw-r--r--  1 root root      4185 2024-10-01 18:12 ./testing/FILE_LIST
--rw-r--r--  1 root root   3500740 2024-09-06 19:25 ./testing/MANIFEST.bz2
+-rw-r--r--  1 root root   3495172 2024-10-01 18:12 ./testing/MANIFEST.bz2
--rw-r--r--  1 root root      1859 2024-09-06 19:25 ./testing/PACKAGES.TXT
+-rw-r--r--  1 root root      1859 2024-10-01 18:12 ./testing/PACKAGES.TXT
-drwxr-xr-x  2 root root      4096 2024-09-06 19:25 ./testing/packages
+drwxr-xr-x  2 root root      4096 2024-10-01 18:12 ./testing/packages
--rw-r--r--  1 root root       346 2024-08-10 17:56 ./testing/packages/llvm-18.1.8-x86_64-1_slack15.0.txt
+-rw-r--r--  1 root root       346 2024-09-29 03:56 ./testing/packages/llvm-18.1.8-x86_64-2_slack15.0.txt
--rw-r--r--  1 root root 242102688 2024-08-10 17:56 ./testing/packages/llvm-18.1.8-x86_64-1_slack15.0.txz
+-rw-r--r--  1 root root 243229488 2024-09-29 03:56 ./testing/packages/llvm-18.1.8-x86_64-2_slack15.0.txz
--rw-r--r--  1 root root       195 2024-08-10 17:56 ./testing/packages/llvm-18.1.8-x86_64-1_slack15.0.txz.asc
+-rw-r--r--  1 root root       195 2024-09-29 03:56 ./testing/packages/llvm-18.1.8-x86_64-2_slack15.0.txz.asc
 -rw-r--r--  1 root root       426 2024-09-05 23:56 ./testing/packages/rust-1.81.0-x86_64-1_slack15.0.txt
 -rw-r--r--  1 root root 120221512 2024-09-05 23:56 ./testing/packages/rust-1.81.0-x86_64-1_slack15.0.txz
 -rw-r--r--  1 root root       195 2024-09-05 23:56 ./testing/packages/rust-1.81.0-x86_64-1_slack15.0.txz.asc
@@ -17264,7 +17323,7 @@ drwxr-xr-x  2 root root      4096 2022-02-02 06:50 ./testing/source/linux-5.16.5
 drwxr-xr-x  2 root root      4096 2024-07-19 18:38 ./testing/source/llvm
 -rw-r--r--  1 root root       275 2024-03-06 20:03 ./testing/source/llvm/clang.toolchains.32-bit.triple.diff.gz
 -rwxr-xr-x  1 root root      4278 2024-08-10 17:15 ./testing/source/llvm/libclc.SlackBuild
--rwxr-xr-x  1 root root      8072 2024-08-11 01:22 ./testing/source/llvm/llvm.SlackBuild
+-rwxr-xr-x  1 root root      8100 2024-09-29 00:23 ./testing/source/llvm/llvm.SlackBuild
 -rw-r--r--  1 root root        77 2024-06-20 02:16 ./testing/source/llvm/llvm.url
 -rw-r--r--  1 root root 122282653 2024-06-15 17:21 ./testing/source/llvm/llvmorg-18.1.8.tar.lz
 -rw-r--r--  1 root root       830 2019-07-25 03:31 ./testing/source/llvm/slack-desc

extra/source/llvm/llvm.SlackBuild

@@ -27,7 +27,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=llvm
 VERSION=${VERSION:-$(echo llvm-*.tar.xz | rev | cut -f 4- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1_slack15.0}
+BUILD=${BUILD:-2_slack15.0}
 
 # For the two options below, either set both to OFF or *only one* to ON:
 
@@ -227,6 +227,7 @@ cd build
     -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
     -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
     -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_SKIP_RPATH=ON \
     -DLLVM_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \
     -DLIBCXX_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \
     -DLIBCXXABI_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \

pasture/source/samba/doinst.sh

@@ -0,0 +1,42 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname ${NEW})/$(basename ${NEW} .new)"
+  if [ -e ${OLD} ]; then
+    cp -a ${OLD} ${NEW}.incoming
+    cat ${NEW} > ${NEW}.incoming
+    mv ${NEW}.incoming ${NEW}
+  fi
+  config ${NEW}
+}
+
+config etc/samba/lmhosts.new
+preserve_perms etc/rc.d/rc.samba.new
+
+# Commented out 2014-09-15 just in case we do need to change this.
+## This won't be needed.  The point here is to preserve the permissions of the existing
+## file, if there is one.  I don't see major new development happening in rc.samba...  ;-)
+#rm -f etc/rc.d/rc.samba.new
+
+# Since /etc/samba/private/ has moved to /var/lib/samba/private, migrate any
+# important files if possible:
+if [ -d etc/samba/private -a -d var/lib/samba/private ]; then
+  for file in etc/samba/private/* ; do
+    if [ -r "$file" -a ! -r "var/lib/samba/private/$(basename $file)" ]; then
+      mv "$file" var/lib/samba/private
+    fi
+  done
+  # Might as well try to eliminate this directory, since it should be empty:
+  rmdir etc/samba/private 1> /dev/null 2> /dev/null
+fi

pasture/source/samba/rc.samba

@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# /etc/rc.d/rc.samba
+#
+# Start/stop/restart the Samba SMB file/print server.
+#
+# To make Samba start automatically at boot, make this
+# file executable:  chmod 755 /etc/rc.d/rc.samba
+#
+
+samba_start() {
+  if [ -x /usr/sbin/smbd -a -x /usr/sbin/nmbd -a -r /etc/samba/smb.conf ]; then
+    mkdir -p /var/run/samba
+    echo "Starting Samba:  /usr/sbin/smbd -D"
+    /usr/sbin/smbd -D
+    echo "                 /usr/sbin/nmbd -D"
+    /usr/sbin/nmbd -D
+  elif [ ! -r /etc/samba/smb.conf ]; then
+    echo "ERROR:  cannot start Samba since /etc/samba/smb.conf does not exist"
+  fi
+}
+
+samba_stop() {
+  killall smbd nmbd
+}
+
+samba_restart() {
+  samba_stop
+  sleep 2
+  samba_start
+}
+
+case "$1" in
+'start')
+  samba_start
+  ;;
+'stop')
+  samba_stop
+  ;;
+'restart')
+  samba_restart
+  ;;
+*)
+  # Default is "start", for backwards compatibility with previous
+  # Slackware versions.  This may change to a 'usage' error someday.
+  samba_start
+esac
+

pasture/source/samba/samba.SlackBuild

@@ -0,0 +1,243 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2012, 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2021  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=samba
+VERSION=${VERSION:-$(echo samba-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack15.0}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i586 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i586" ]; then
+    SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-samba
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf samba-$VERSION
+tar xvf $CWD/samba-$VERSION.tar.?z || exit 1
+cd samba-$VERSION || exit 1
+
+# Add time.h to libsmbclient.h for ffmpeg compatibility:
+zcat $CWD/samba.libsmbclient.h.ffmpeg.compat.diff.gz | patch -p1 --verbose || exit 1
+
+if [ ! -d source3/lib/cmdline ]; then
+  ( cd source3/lib
+    mkdir cmdline
+    cd cmdline
+    ln -sf ../../../source3/include/popt_common.h . )
+fi
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Choose correct options depending on whether PAM is installed:
+if [ -L /lib${LIBDIRSUFFIX}/libpam.so.? ]; then
+  PAM_OPTIONS="--with-pam --with-pammodulesdir=/lib${LIBDIRSUFFIX}/security --with-system-mitkrb5 --with-experimental-mit-ad-dc"
+  unset SHADOW_OPTIONS
+else
+  unset PAM_OPTIONS
+  SHADOW_OPTIONS="--without-pam"
+fi
+
+# Some of these options could be auto-detected, but declaring them
+# here doesn't hurt and helps document what features we're trying to
+# build in.
+#
+# LDFLAGS are needed to avoid problems with missing symbols.
+LDFLAGS="-Wl,--no-as-needed" \
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --enable-fhs \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --includedir=/usr/include \
+  --bindir=/usr/bin \
+  --sbindir=/usr/sbin \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --with-configdir=/etc/samba \
+  --with-piddir=/var/run \
+  --with-privatedir=/var/lib/samba/private \
+  --with-privatelibdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-modulesdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-lockdir=/var/cache/samba \
+  --with-logfilebase=/var/log/samba \
+  --localstatedir=/var \
+  --enable-cups \
+  --with-acl-support \
+  --with-automount \
+  --with-quotas \
+  --with-syslog \
+  --with-utmp \
+  --with-winbind \
+  --with-ldap \
+  --with-ads \
+  --without-fam \
+  $PAM_OPTIONS \
+  $SHADOW_OPTIONS \
+  --build=$TARGET || exit 1
+  # Gives errors:
+  #--builtin-libraries=replace,ccan \
+  #--bundled-libraries=heimdal \
+
+# Build with waf directly so that multiple jobs work.
+# Script lifted from "./configure".
+PREVPATH=`dirname $0`
+WAF=./buildtools/bin/waf
+# using JOBS=1 gives maximum compatibility with
+# systems like AIX which have broken threading in python
+JOBS=$(echo $NUMJOBS | tr -dc '0-9')
+export JOBS
+# Make sure we don't have any library preloaded.
+unset LD_PRELOAD
+cd . || exit 1
+${PYTHON:=python3} $WAF build "$@" || exit 1
+cd $PREVPATH
+
+mkdir -p \
+         $PKG/usr/doc/samba-$VERSION \
+         $PKG/var/spool/samba \
+         $PKG/var/log/samba \
+         $PKG/var/lib/samba/private \
+         $PKG/var/cache/samba
+chmod 700 $PKG/var/lib/samba/private
+chmod 1777 $PKG/var/spool/samba
+
+# Again, use waf directly to allow multithreading:
+#make install DESTDIR=$PKG || exit 1
+DESTDIR=$PKG
+export DESTDIR
+${PYTHON:=python3} $WAF install "$@" || exit 1
+
+# Install the smbprint script:
+install -m0744 packaging/printing/smbprint $PKG/usr/bin/smbprint
+
+# Add a sample config file:
+cat $CWD/smb.conf.default > $PKG/etc/samba/smb.conf-sample
+
+# Setup a default lmhosts file:
+echo "127.0.0.1	localhost" > $PKG/etc/samba/lmhosts.new
+
+if [ ! -r $PKG/usr/bin/smbget ]; then
+  rm -f $PKG/usr/share/man/man1/smbget.1
+fi
+
+# We'll add rc.samba to the init directory, but chmod 644 so that it doesn't
+# start by default:
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.samba > $PKG/etc/rc.d/rc.samba.new
+chmod 644 $PKG/etc/rc.d/rc.samba.new
+
+mv $PKG/usr/share/man $PKG/usr
+gzip -9 $PKG/usr/man/man?/*.?
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# PAM related stuff we don't use:
+rm -r $PKG/usr/share/locale
+rm -f $PKG/usr/man/man8/pam*
+
+cp -a \
+  COPYING* MAINTAINERS Manifest PFIF.txt README* \
+  Read-Manifest-Now Roadmap WHATSNEW.txt docs examples \
+  $PKG/usr/doc/samba-$VERSION
+# These are installed elsewhere:
+rm -rf $PKG/usr/doc/samba-$VERSION/docs/htmldocs \
+       $PKG/usr/doc/samba-$VERSION/docs/manpages
+# Empty now?
+rmdir $PKG/usr/doc/samba-$VERSION/docs 2> /dev/null
+# I'm sorry, but when all this info is included in HTML, adding 7MB worth of
+# PDF files just to have extra artwork is more fluff than I'll agree to.
+rm -f $PKG/usr/doc/samba-$VERSION/docs/*.pdf
+# Also redundant also:
+rm -rf $PKG/usr/doc/samba-$VERSION/docs/docbook
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cat << EOF
+
+*** Be sure the package contains:
+
+drwxr-xr-x   2 root     root         4096 May  3 15:46 /var/cache/samba/
+drwx------   2 root     root         1024 Mar 12 13:21 /var/lib/samba/private
+drwxr-xr-x   2 root     root           48 Aug 29 13:06 /var/log/samba/
+drwxrwxrwt   2 root     root         1024 Mar 12 13:21 /var/spool/samba/
+
+EOF
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/samba-$VERSION-$ARCH-$BUILD.txz
+

pasture/source/samba/samba.libsmbclient.h.ffmpeg.compat.diff

@@ -0,0 +1,10 @@
+--- ./source3/include/libsmbclient.h.orig	2018-07-12 03:23:36.000000000 -0500
++++ ./source3/include/libsmbclient.h	2019-02-06 14:36:16.499779599 -0600
+@@ -79,6 +79,7 @@
+ #include <stdint.h>
+ #include <fcntl.h>
+ #include <utime.h>
++#include <time.h>
+ 
+ #define SMBC_BASE_FD        10000 /* smallest file descriptor returned */
+ 

pasture/source/samba/samba.url

@@ -0,0 +1,2 @@
+https://download.samba.org/pub/samba/stable/samba-4.15.13.tar.gz
+https://download.samba.org/pub/samba/stable/samba-4.15.13.tar.asc

pasture/source/samba/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+samba: samba (CIFS file and print server)
+samba:
+samba: Samba is a CIFS file and print server for CIFS clients. It allows
+samba: you to make file space or printers on a Samba host available to CIFS
+samba: clients (such as PCs running Windows).
+samba:
+samba: If you have any Windows file servers, you may be able to replace them
+samba: or supplement them with Samba. One of Samba's big strengths is
+samba: integration, so you can use it to tie together your Linux hosts and
+samba: Windows PC clients.
+samba:

pasture/source/samba/smb.conf.default

@@ -0,0 +1,223 @@
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# For a step to step guide on installing, configuring and using samba, 
+# read the Samba-HOWTO-Collection. This may be obtained from:
+#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the 
+# Samba-Guide which is generated daily and can be downloaded from: 
+#  http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
+# Any line which starts with a ; (semi-colon) or a # (hash) 
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors. 
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: LINUX2
+   workgroup = MYGROUP
+
+# server string is the equivalent of the NT Description field
+   server string = Samba Server
+
+# Server role. Defines in which mode Samba will operate. Possible
+# values are "standalone server", "member server", "classic primary
+# domain controller", "classic backup domain controller", "active
+# directory domain controller".
+#
+# Most people will want "standalone server" or "member server".
+# Running as "active directory domain controller" will require first
+# running "samba-tool domain provision" to wipe databases and create a
+# new domain.
+   server role = standalone server
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+;   hosts allow = 192.168.1. 192.168.2. 127.
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+;  guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+   log file = /var/log/samba.%m
+
+# Put a capping on the size of the log files (in Kb).
+   max log size = 50
+
+# Specifies the Kerberos or Active Directory realm the host is part of
+;   realm = MY_REALM
+
+# Backend to store user information in. New installations should 
+# use either tdbsam or ldapsam. smbpasswd is available for backwards 
+# compatibility. tdbsam requires no further configuration.
+;   passdb backend = tdbsam
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+#       this line.  The included file is read at that point.
+;   include = /usr/local/samba/lib/smb.conf.%m
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+;   interfaces = 192.168.12.2/24 192.168.13.2/24 
+
+# Where to store roving profiles (only for Win95 and WinNT)
+#        %L substitutes for this servers netbios name, %U is username
+#        You must uncomment the [Profiles] share below
+;   logon path = \\%L\Profiles\%U
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+;   wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+;   wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one	WINS Server on the network. The default is NO.
+;   wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+   dns proxy = no 
+
+# These scripts are used on a domain controller or stand-alone 
+# machine to add or delete corresponding unix accounts
+;  add user script = /usr/sbin/useradd %u
+;  add group script = /usr/sbin/groupadd %g
+;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+;  delete user script = /usr/sbin/userdel %u
+;  delete user from group script = /usr/sbin/deluser %u %g
+;  delete group script = /usr/sbin/groupdel %g
+
+
+#============================ Share Definitions ==============================
+[homes]
+   comment = Home Directories
+   browseable = no
+   writable = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+;   comment = Network Logon Service
+;   path = /usr/local/samba/lib/netlogon
+;   guest ok = yes
+;   writable = no
+;   share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+;    path = /usr/local/samba/profiles
+;    browseable = no
+;    guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to 
+# specifically define each individual printer
+[printers]
+   comment = All Printers
+   path = /var/spool/samba
+   browseable = no
+# Set public = yes to allow user 'guest account' to print
+   guest ok = no
+   writable = no
+   printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+;   comment = Temporary file space
+;   path = /tmp
+;   read only = no
+;   public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+;   comment = Public Stuff
+;   path = /home/samba
+;   public = yes
+;   writable = no
+;   printable = no
+;   write list = @staff
+
+# Other examples. 
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+;   comment = Fred's Printer
+;   valid users = fred
+;   path = /homes/fred
+;   printer = freds_printer
+;   public = no
+;   writable = no
+;   printable = yes
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+;   comment = Fred's Service
+;   path = /usr/somewhere/private
+;   valid users = fred
+;   public = no
+;   writable = yes
+;   printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %U option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+;  comment = PC Directories
+;  path = /usr/pc/%m
+;  public = no
+;  writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+;   path = /usr/somewhere/else/public
+;   public = yes
+;   only guest = yes
+;   writable = yes
+;   printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+;   comment = Mary's and Fred's stuff
+;   path = /usr/somewhere/shared
+;   valid users = mary fred
+;   public = no
+;   writable = yes
+;   printable = no
+;   create mask = 0765
+
+

pasture/source/samba/smb.conf.default.orig

@@ -0,0 +1,223 @@
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# For a step to step guide on installing, configuring and using samba, 
+# read the Samba-HOWTO-Collection. This may be obtained from:
+#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the 
+# Samba-Guide which is generated daily and can be downloaded from: 
+#  http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
+# Any line which starts with a ; (semi-colon) or a # (hash) 
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors. 
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
+   workgroup = MYGROUP
+
+# server string is the equivalent of the NT Description field
+   server string = Samba Server
+
+# Server role. Defines in which mode Samba will operate. Possible
+# values are "standalone server", "member server", "classic primary
+# domain controller", "classic backup domain controller", "active
+# directory domain controller".
+#
+# Most people will want "standalone server" or "member server".
+# Running as "active directory domain controller" will require first
+# running "samba-tool domain provision" to wipe databases and create a
+# new domain.
+   server role = standalone server
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+;   hosts allow = 192.168.1. 192.168.2. 127.
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+;  guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+   log file = /usr/local/samba/var/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+   max log size = 50
+
+# Specifies the Kerberos or Active Directory realm the host is part of
+;   realm = MY_REALM
+
+# Backend to store user information in. New installations should 
+# use either tdbsam or ldapsam. smbpasswd is available for backwards 
+# compatibility. tdbsam requires no further configuration.
+;   passdb backend = tdbsam
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+#       this line.  The included file is read at that point.
+;   include = /usr/local/samba/lib/smb.conf.%m
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+;   interfaces = 192.168.12.2/24 192.168.13.2/24 
+
+# Where to store roving profiles (only for Win95 and WinNT)
+#        %L substitutes for this servers netbios name, %U is username
+#        You must uncomment the [Profiles] share below
+;   logon path = \\%L\Profiles\%U
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+;   wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+;   wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one	WINS Server on the network. The default is NO.
+;   wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+   dns proxy = no 
+
+# These scripts are used on a domain controller or stand-alone 
+# machine to add or delete corresponding unix accounts
+;  add user script = /usr/sbin/useradd %u
+;  add group script = /usr/sbin/groupadd %g
+;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+;  delete user script = /usr/sbin/userdel %u
+;  delete user from group script = /usr/sbin/deluser %u %g
+;  delete group script = /usr/sbin/groupdel %g
+
+
+#============================ Share Definitions ==============================
+[homes]
+   comment = Home Directories
+   browseable = no
+   writable = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+;   comment = Network Logon Service
+;   path = /usr/local/samba/lib/netlogon
+;   guest ok = yes
+;   writable = no
+;   share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+;    path = /usr/local/samba/profiles
+;    browseable = no
+;    guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to 
+# specifically define each individual printer
+[printers]
+   comment = All Printers
+   path = /usr/spool/samba
+   browseable = no
+# Set public = yes to allow user 'guest account' to print
+   guest ok = no
+   writable = no
+   printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+;   comment = Temporary file space
+;   path = /tmp
+;   read only = no
+;   public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+;   comment = Public Stuff
+;   path = /home/samba
+;   public = yes
+;   writable = no
+;   printable = no
+;   write list = @staff
+
+# Other examples. 
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+;   comment = Fred's Printer
+;   valid users = fred
+;   path = /homes/fred
+;   printer = freds_printer
+;   public = no
+;   writable = no
+;   printable = yes
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+;   comment = Fred's Service
+;   path = /usr/somewhere/private
+;   valid users = fred
+;   public = no
+;   writable = yes
+;   printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %U option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+;  comment = PC Directories
+;  path = /usr/pc/%m
+;  public = no
+;  writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+;   path = /usr/somewhere/else/public
+;   public = yes
+;   only guest = yes
+;   writable = yes
+;   printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+;   comment = Mary's and Fred's stuff
+;   path = /usr/somewhere/shared
+;   valid users = mary fred
+;   public = no
+;   writable = yes
+;   printable = no
+;   create mask = 0765
+
+

pasture/source/samba/smb.conf.diff

@@ -0,0 +1,29 @@
+--- smb.conf.default.orig	2017-01-11 01:55:14.000000000 -0600
++++ smb.conf.default	2017-03-23 14:18:05.114503416 -0500
+@@ -22,7 +22,7 @@
+ #======================= Global Settings =====================================
+ [global]
+ 
+-# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
++# workgroup = NT-Domain-Name or Workgroup-Name, eg: LINUX2
+    workgroup = MYGROUP
+ 
+ # server string is the equivalent of the NT Description field
+@@ -52,7 +52,7 @@
+ 
+ # this tells Samba to use a separate log file for each machine
+ # that connects
+-   log file = /usr/local/samba/var/log.%m
++   log file = /var/log/samba.%m
+ 
+ # Put a capping on the size of the log files (in Kb).
+    max log size = 50
+@@ -136,7 +136,7 @@
+ # specifically define each individual printer
+ [printers]
+    comment = All Printers
+-   path = /usr/spool/samba
++   path = /var/spool/samba
+    browseable = no
+ # Set public = yes to allow user 'guest account' to print
+    guest ok = no

patches/packages/cryfs-0.10.3-x86_64-5_slack15.0.txt

@@ -0,0 +1,11 @@
+cryfs: cryfs (cryptographic filesystem)
+cryfs:
+cryfs: CryFS encrypts your files, so you can safely store them anywhere. It
+cryfs: works well together with cloud services.
+cryfs:
+cryfs: Homepage: https://www.cryfs.org
+cryfs:
+cryfs:
+cryfs:
+cryfs:
+cryfs:

patches/packages/espeak-ng-1.50-x86_64-4_slack15.0.txt

@@ -0,0 +1,11 @@
+espeak-ng: espeak-ng (text-to-speech synthesizer)
+espeak-ng:
+espeak-ng: The eSpeak NG (Next Generation) Text-to-Speech program is an open
+espeak-ng: source speech synthesizer that supports many languages and accents. It
+espeak-ng: is based on the eSpeak engine created by Jonathan Duddington. It uses
+espeak-ng: spectral formant synthesis by default which sounds robotic, but can be
+espeak-ng: configured to use Klatt formant synthesis or MBROLA to give it a more
+espeak-ng: natural sound.
+espeak-ng:
+espeak-ng: Homepage: https://github.com/espeak-ng/espeak-ng
+espeak-ng:

patches/packages/libvncserver-0.9.13-x86_64-4_slack15.0.txt

@@ -0,0 +1,11 @@
+libvncserver: libvncserver (VNC Server Library)
+libvncserver:
+libvncserver: LibVNCServer makes writing a VNC server (or more correctly,
+libvncserver: a program exporting a framebuffer via the Remote Frame Buffer
+libvncserver: protocol) easy.
+libvncserver:
+libvncserver: Homepage: https://libvnc.github.io/
+libvncserver:
+libvncserver:
+libvncserver:
+libvncserver:

patches/packages/marisa-0.2.6-x86_64-5_slack15.0.txt

@@ -0,0 +1,11 @@
+marisa: marisa (trie data structure library)
+marisa:
+marisa: Matching Algorithm with Recursively Implemented StorAge (MARISA) is a
+marisa: static and space-efficient trie data structure. And libmarisa is a
+marisa: C++ library to provide an implementation of MARISA. Also, the package
+marisa: of libmarisa contains a set of command line tools for building and
+marisa: operating a MARISA-based dictionary.
+marisa:
+marisa: Homepage: https://code.google.com/p/marisa-trie/
+marisa:
+marisa:

patches/packages/mlt-7.4.0-x86_64-2_slack15.0.txt

@@ -0,0 +1,11 @@
+mlt: mlt (open source multimedia framework)
+mlt:
+mlt: MLT is an open source multimedia framework, designed and developed for
+mlt: television broadcasting. It provides a toolkit for broadcasters, video
+mlt: editors, media players, transcoders, web streamers, and many more
+mlt: types of applications. The functionality of the system is provided via
+mlt: an assortment of ready to use tools, XML authoring components, and an
+mlt: extensible plug-in based API.
+mlt:
+mlt: Homepage: http://www.mltframework.org/
+mlt:

patches/packages/openobex-1.7.2-x86_64-6_slack15.0.txt

@@ -0,0 +1,11 @@
+openobex: openobex (Object Exchange protocol library)
+openobex:
+openobex: OpenOBEX is a free open source implementation of the Object Exchange
+openobex: (OBEX) protocol. OBEX is a session protocol and can best be
+openobex: described as a binary HTTP protocol. OBEX is optimised for ad-hoc
+openobex: wireless links and can be used to exchange all kinds of objects like
+openobex: files, pictures, calendar entries (vCal) and business cards (vCard).
+openobex:
+openobex: Visit the project here: http://www.openobex.org
+openobex:
+openobex:

patches/packages/spirv-llvm-translator-13.0.0-x86_64-2_slack15.0.txt

@@ -0,0 +1,11 @@
+spirv-llvm-translator: spirv-llvm-translator (LLVM/SPIR-V Bi-Directional Translator)
+spirv-llvm-translator:
+spirv-llvm-translator: This is the LLVM/SPIR-V Bi-Directional Translator, a library and tool
+spirv-llvm-translator: for translation between LLVM IR and SPIR-V.
+spirv-llvm-translator:
+spirv-llvm-translator: Homepage: https://github.com/KhronosGroup/SPIRV-LLVM-Translator
+spirv-llvm-translator:
+spirv-llvm-translator:
+spirv-llvm-translator:
+spirv-llvm-translator:
+spirv-llvm-translator:

patches/source/cryfs/041b5baea5a4efceff33df2f316646b47a1cd7c0.patch

@@ -0,0 +1,27 @@
+From 041b5baea5a4efceff33df2f316646b47a1cd7c0 Mon Sep 17 00:00:00 2001
+From: Sam James <11667869+thesamesam@users.noreply.github.com>
+Date: Sat, 14 Aug 2021 17:29:24 +0100
+Subject: [PATCH] src/fspp/fuse/Fuse.h: add <memory.h> include for
+ std::shared_ptr (#395)
+
+Needed to fix build with Boost 1.77 (some indirect inclusion
+got lost).
+
+Signed-off-by: Sam James <sam@gentoo.org>
+---
+ src/fspp/fuse/Fuse.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/fspp/fuse/Fuse.h b/src/fspp/fuse/Fuse.h
+index 2dd3c2d4d..3841e38a4 100644
+--- a/src/fspp/fuse/Fuse.h
++++ b/src/fspp/fuse/Fuse.h
+@@ -11,6 +11,7 @@
+ #include <boost/optional.hpp>
+ #include <cpp-utils/macros.h>
+ #include <atomic>
++#include <memory>
+ #include "stat_compatibility.h"
+ #include <fspp/fs_interface/Context.h>
+ 
+

patches/source/cryfs/27587ea1acec5f939a31217f1c43953378f18821.patch

@@ -0,0 +1,297 @@
+From 27587ea1acec5f939a31217f1c43953378f18821 Mon Sep 17 00:00:00 2001
+From: Sebastian Messmer <messmer@cryfs.org>
+Date: Sat, 8 May 2021 14:44:27 -0700
+Subject: [PATCH] Fixed an issue when compiling with GCC 11, see
+ https://github.com/cryfs/cryfs/issues/389
+
+---
+ ChangeLog.txt                                 |  5 ++
+ .../onblocks/datanodestore/DataNodeView.h     |  8 +--
+ .../filesystem/fsblobstore/utils/DirEntry.cpp | 66 +++++++++----------
+ src/cryfs/localstate/LocalStateMetadata.cpp   | 24 +++----
+ src/cryfs/localstate/LocalStateMetadata.h     | 10 +--
+ 5 files changed, 59 insertions(+), 54 deletions(-)
+
+diff --git a/ChangeLog.txt b/ChangeLog.txt
+index f9776eb93..9d7a6708c 100644
+--- a/ChangeLog.txt
++++ b/ChangeLog.txt
+@@ -1,3 +1,8 @@
++Version 0.10.4 (unreleased)
++--------------
++Fixed bugs:
++* Fixed an issue when compiling with GCC 11, see https://github.com/cryfs/cryfs/issues/389
++
+ Version 0.10.3
+ ---------------
+ Fixed bugs:
+diff --git a/src/blobstore/implementations/onblocks/datanodestore/DataNodeView.h b/src/blobstore/implementations/onblocks/datanodestore/DataNodeView.h
+index 256c28495..3799612e3 100644
+--- a/src/blobstore/implementations/onblocks/datanodestore/DataNodeView.h
++++ b/src/blobstore/implementations/onblocks/datanodestore/DataNodeView.h
+@@ -67,7 +67,7 @@ class DataNodeView final {
+ 
+   static DataNodeView create(blockstore::BlockStore *blockStore, const DataNodeLayout &layout, uint16_t formatVersion, uint8_t depth, uint32_t size, cpputils::Data data) {
+     ASSERT(data.size() <= layout.datasizeBytes(), "Data is too large for node");
+-    cpputils::Data serialized = _serialize(layout, formatVersion, depth, size, std::move(data));
++    cpputils::Data serialized = serialize_(layout, formatVersion, depth, size, std::move(data));
+     ASSERT(serialized.size() == layout.blocksizeBytes(), "Wrong block size");
+     auto block = blockStore->create(serialized);
+     return DataNodeView(std::move(block));
+@@ -75,7 +75,7 @@ class DataNodeView final {
+ 
+   static DataNodeView initialize(cpputils::unique_ref<blockstore::Block> block, const DataNodeLayout &layout, uint16_t formatVersion, uint8_t depth, uint32_t size, cpputils::Data data) {
+     ASSERT(data.size() <= DataNodeLayout(block->size()).datasizeBytes(), "Data is too large for node");
+-    cpputils::Data serialized = _serialize(layout, formatVersion, depth, size, std::move(data));
++    cpputils::Data serialized = serialize_(layout, formatVersion, depth, size, std::move(data));
+     ASSERT(serialized.size() == block->size(), "Block has wrong size");
+     block->write(serialized.data(), 0, serialized.size());
+     return DataNodeView(std::move(block));
+@@ -83,7 +83,7 @@ class DataNodeView final {
+ 
+   static DataNodeView overwrite(blockstore::BlockStore *blockStore, const DataNodeLayout &layout, uint16_t formatVersion, uint8_t depth, uint32_t size, const blockstore::BlockId &blockId, cpputils::Data data) {
+     ASSERT(data.size() <= layout.datasizeBytes(), "Data is too large for node");
+-    cpputils::Data serialized = _serialize(layout, formatVersion, depth, size, std::move(data));
++    cpputils::Data serialized = serialize_(layout, formatVersion, depth, size, std::move(data));
+     auto block = blockStore->overwrite(blockId, std::move(serialized));
+     return DataNodeView(std::move(block));
+   }
+@@ -143,7 +143,7 @@ class DataNodeView final {
+   }
+ 
+ private:
+-  static cpputils::Data _serialize(const DataNodeLayout &layout, uint16_t formatVersion, uint8_t depth, uint32_t size, cpputils::Data data) {
++  static cpputils::Data serialize_(const DataNodeLayout &layout, uint16_t formatVersion, uint8_t depth, uint32_t size, cpputils::Data data) {
+     cpputils::Data result(layout.blocksizeBytes());
+     cpputils::serialize<uint16_t>(result.dataOffset(layout.FORMAT_VERSION_OFFSET_BYTES), formatVersion);
+     cpputils::serialize<uint8_t>(result.dataOffset(layout.DEPTH_OFFSET_BYTES), depth);
+diff --git a/src/cryfs/filesystem/fsblobstore/utils/DirEntry.cpp b/src/cryfs/filesystem/fsblobstore/utils/DirEntry.cpp
+index 941148db9..70dd5a560 100644
+--- a/src/cryfs/filesystem/fsblobstore/utils/DirEntry.cpp
++++ b/src/cryfs/filesystem/fsblobstore/utils/DirEntry.cpp
+@@ -11,55 +11,55 @@ namespace cryfs {
+ 
+         namespace {
+             template<typename DataType>
+-            size_t _serialize(void* dst, const DataType& obj) {
++            size_t serialize_(void* dst, const DataType& obj) {
+                 cpputils::serialize<DataType>(dst, obj);
+                 return sizeof(DataType);
+             }
+ 
+             template<typename DataType>
+-            DataType _deserialize(const char** src) {
++            DataType deserialize_(const char** src) {
+                 DataType result = cpputils::deserialize<DataType>(*src);
+                 *src += sizeof(DataType);
+                 return result;
+             }
+ 
+-            constexpr size_t _serializedTimeValueSize() {
++            constexpr size_t serializedTimeValueSize_() {
+                 return sizeof(uint64_t) + sizeof(uint32_t);
+             }
+ 
+-            unsigned int _serializeTimeValue(uint8_t *dest, timespec value) {
++            unsigned int serializeTimeValue_(uint8_t *dest, timespec value) {
+                 unsigned int offset = 0;
+-                offset += _serialize<uint64_t>(dest + offset, value.tv_sec);
+-                offset += _serialize<uint32_t>(dest + offset, value.tv_nsec);
+-                ASSERT(offset == _serializedTimeValueSize(), "serialized to wrong size");
++                offset += serialize_<uint64_t>(dest + offset, value.tv_sec);
++                offset += serialize_<uint32_t>(dest + offset, value.tv_nsec);
++                ASSERT(offset == serializedTimeValueSize_(), "serialized to wrong size");
+                 return offset;
+             }
+ 
+-            timespec _deserializeTimeValue(const char **pos) {
++            timespec deserializeTimeValue_(const char **pos) {
+                 timespec value{};
+-                value.tv_sec = _deserialize<uint64_t>(pos);
+-                value.tv_nsec = _deserialize<uint32_t>(pos);
++                value.tv_sec = deserialize_<uint64_t>(pos);
++                value.tv_nsec = deserialize_<uint32_t>(pos);
+                 return value;
+             }
+ 
+-            unsigned int _serializeString(uint8_t *dest, const string &value) {
++            unsigned int serializeString_(uint8_t *dest, const string &value) {
+                 std::memcpy(dest, value.c_str(), value.size()+1);
+                 return value.size() + 1;
+             }
+ 
+-            string _deserializeString(const char **pos) {
++            string deserializeString_(const char **pos) {
+                 size_t length = strlen(*pos);
+                 string value(*pos, length);
+                 *pos += length + 1;
+                 return value;
+             }
+ 
+-            unsigned int _serializeBlockId(uint8_t *dest, const BlockId &blockId) {
++            unsigned int serializeBlockId_(uint8_t *dest, const BlockId &blockId) {
+                 blockId.ToBinary(dest);
+                 return blockId.BINARY_LENGTH;
+             }
+ 
+-            BlockId _deserializeBlockId(const char **pos) {
++            BlockId deserializeBlockId_(const char **pos) {
+                 BlockId blockId = BlockId::FromBinary(*pos);
+                 *pos += BlockId::BINARY_LENGTH;
+                 return blockId;
+@@ -75,35 +75,35 @@ namespace cryfs {
+                     _mode.hasDirFlag()) + ", " + std::to_string(_mode.hasSymlinkFlag()) + ", " + std::to_string(static_cast<uint8_t>(_type))
+             );
+             unsigned int offset = 0;
+-            offset += _serialize<uint8_t>(dest + offset, static_cast<uint8_t>(_type));
+-            offset += _serialize<uint32_t>(dest + offset, _mode.value());
+-            offset += _serialize<uint32_t>(dest + offset, _uid.value());
+-            offset += _serialize<uint32_t>(dest + offset, _gid.value());
+-            offset += _serializeTimeValue(dest + offset, _lastAccessTime);
+-            offset += _serializeTimeValue(dest + offset, _lastModificationTime);
+-            offset += _serializeTimeValue(dest + offset, _lastMetadataChangeTime);
+-            offset += _serializeString(dest + offset, _name);
+-            offset += _serializeBlockId(dest + offset, _blockId);
++            offset += serialize_<uint8_t>(dest + offset, static_cast<uint8_t>(_type));
++            offset += serialize_<uint32_t>(dest + offset, _mode.value());
++            offset += serialize_<uint32_t>(dest + offset, _uid.value());
++            offset += serialize_<uint32_t>(dest + offset, _gid.value());
++            offset += serializeTimeValue_(dest + offset, _lastAccessTime);
++            offset += serializeTimeValue_(dest + offset, _lastModificationTime);
++            offset += serializeTimeValue_(dest + offset, _lastMetadataChangeTime);
++            offset += serializeString_(dest + offset, _name);
++            offset += serializeBlockId_(dest + offset, _blockId);
+             ASSERT(offset == serializedSize(), "Didn't write correct number of elements");
+         }
+ 
+         const char *DirEntry::deserializeAndAddToVector(const char *pos, vector<DirEntry> *result) {
+-            fspp::Dir::EntryType type = static_cast<fspp::Dir::EntryType>(_deserialize<uint8_t>(&pos));
+-            fspp::mode_t mode = fspp::mode_t(_deserialize<uint32_t>(&pos));
+-            fspp::uid_t uid = fspp::uid_t(_deserialize<uint32_t>(&pos));
+-            fspp::gid_t gid = fspp::gid_t(_deserialize<uint32_t>(&pos));
+-            timespec lastAccessTime = _deserializeTimeValue(&pos);
+-            timespec lastModificationTime = _deserializeTimeValue(&pos);
+-            timespec lastMetadataChangeTime = _deserializeTimeValue(&pos);
+-            string name = _deserializeString(&pos);
+-            BlockId blockId = _deserializeBlockId(&pos);
++            fspp::Dir::EntryType type = static_cast<fspp::Dir::EntryType>(deserialize_<uint8_t>(&pos));
++            fspp::mode_t mode = fspp::mode_t(deserialize_<uint32_t>(&pos));
++            fspp::uid_t uid = fspp::uid_t(deserialize_<uint32_t>(&pos));
++            fspp::gid_t gid = fspp::gid_t(deserialize_<uint32_t>(&pos));
++            timespec lastAccessTime = deserializeTimeValue_(&pos);
++            timespec lastModificationTime = deserializeTimeValue_(&pos);
++            timespec lastMetadataChangeTime = deserializeTimeValue_(&pos);
++            string name = deserializeString_(&pos);
++            BlockId blockId = deserializeBlockId_(&pos);
+ 
+             result->emplace_back(type, name, blockId, mode, uid, gid, lastAccessTime, lastModificationTime, lastMetadataChangeTime);
+             return pos;
+         }
+ 
+         size_t DirEntry::serializedSize() const {
+-            return 1 + sizeof(uint32_t) + sizeof(uint32_t) + sizeof(uint32_t) + 3*_serializedTimeValueSize() + (
++            return 1 + sizeof(uint32_t) + sizeof(uint32_t) + sizeof(uint32_t) + 3*serializedTimeValueSize_() + (
+                     _name.size() + 1) + _blockId.BINARY_LENGTH;
+         }
+     }
+diff --git a/src/cryfs/localstate/LocalStateMetadata.cpp b/src/cryfs/localstate/LocalStateMetadata.cpp
+index 529a26129..dfa952a1a 100644
+--- a/src/cryfs/localstate/LocalStateMetadata.cpp
++++ b/src/cryfs/localstate/LocalStateMetadata.cpp
+@@ -30,10 +30,10 @@ LocalStateMetadata::LocalStateMetadata(uint32_t myClientId, Hash encryptionKeyHa
+ 
+ LocalStateMetadata LocalStateMetadata::loadOrGenerate(const bf::path &statePath, const Data& encryptionKey, bool allowReplacedFilesystem) {
+   auto metadataFile = statePath / "metadata";
+-  auto loaded = _load(metadataFile);
++  auto loaded = load_(metadataFile);
+   if (loaded == none) {
+     // If it couldn't be loaded, generate a new client id.
+-    return _generate(metadataFile, encryptionKey);
++    return generate_(metadataFile, encryptionKey);
+   }
+ 
+   if (!allowReplacedFilesystem && loaded->_encryptionKeyHash.digest != cpputils::hash::hash(encryptionKey, loaded->_encryptionKeyHash.salt).digest) {
+@@ -42,22 +42,22 @@ LocalStateMetadata LocalStateMetadata::loadOrGenerate(const bf::path &statePath,
+   return *loaded;
+ }
+ 
+-optional<LocalStateMetadata> LocalStateMetadata::_load(const bf::path &metadataFilePath) {
++optional<LocalStateMetadata> LocalStateMetadata::load_(const bf::path &metadataFilePath) {
+   ifstream file(metadataFilePath.string());
+   if (!file.good()) {
+     // State file doesn't exist
+     return none;
+   }
+-  return _deserialize(file);
++  return deserialize_(file);
+ }
+ 
+-void LocalStateMetadata::_save(const bf::path &metadataFilePath) const {
++void LocalStateMetadata::save_(const bf::path &metadataFilePath) const {
+   ofstream file(metadataFilePath.string(), std::ios::trunc);
+-  _serialize(file);
++  serialize_(file);
+ }
+ 
+ namespace {
+-uint32_t _generateClientId() {
++uint32_t generateClientId_() {
+   uint32_t result;
+   do {
+     result = cpputils::deserialize<uint32_t>(Random::PseudoRandom().getFixedSize<sizeof(uint32_t)>().data());
+@@ -82,8 +82,8 @@ optional<uint32_t> _tryLoadClientIdFromLegacyFile(const bf::path &metadataFilePa
+ #endif
+ }
+ 
+-LocalStateMetadata LocalStateMetadata::_generate(const bf::path &metadataFilePath, const Data& encryptionKey) {
+-  uint32_t myClientId = _generateClientId();
++LocalStateMetadata LocalStateMetadata::generate_(const bf::path &metadataFilePath, const Data& encryptionKey) {
++  uint32_t myClientId = generateClientId_();
+ #ifndef CRYFS_NO_COMPATIBILITY
+   // In the old format, this was stored in a "myClientId" file. If that file exists, load it from there.
+   optional<uint32_t> legacy = _tryLoadClientIdFromLegacyFile(metadataFilePath);
+@@ -93,11 +93,11 @@ LocalStateMetadata LocalStateMetadata::_generate(const bf::path &metadataFilePat
+ #endif
+ 
+   LocalStateMetadata result(myClientId, cpputils::hash::hash(encryptionKey, cpputils::hash::generateSalt()));
+-  result._save(metadataFilePath);
++  result.save_(metadataFilePath);
+   return result;
+ }
+ 
+-void LocalStateMetadata::_serialize(ostream& stream) const {
++void LocalStateMetadata::serialize_(ostream& stream) const {
+   ptree pt;
+   pt.put<uint32_t>("myClientId", myClientId());
+   pt.put<string>("encryptionKey.salt", _encryptionKeyHash.salt.ToString());
+@@ -106,7 +106,7 @@ void LocalStateMetadata::_serialize(ostream& stream) const {
+   write_json(stream, pt);
+ }
+ 
+-LocalStateMetadata LocalStateMetadata::_deserialize(istream& stream) {
++LocalStateMetadata LocalStateMetadata::deserialize_(istream& stream) {
+ 	try {
+ 		ptree pt;
+ 		read_json(stream, pt);
+diff --git a/src/cryfs/localstate/LocalStateMetadata.h b/src/cryfs/localstate/LocalStateMetadata.h
+index 8b0ffc662..c06b0f05b 100644
+--- a/src/cryfs/localstate/LocalStateMetadata.h
++++ b/src/cryfs/localstate/LocalStateMetadata.h
+@@ -20,11 +20,11 @@ class LocalStateMetadata final {
+   const uint32_t _myClientId;
+   const cpputils::hash::Hash _encryptionKeyHash;
+ 
+-  static boost::optional<LocalStateMetadata> _load(const boost::filesystem::path &metadataFilePath);
+-  static LocalStateMetadata _deserialize(std::istream& stream);
+-  static LocalStateMetadata _generate(const boost::filesystem::path &metadataFilePath, const cpputils::Data& encryptionKey);
+-  void _save(const boost::filesystem::path &metadataFilePath) const;
+-  void _serialize(std::ostream& stream) const;
++  static boost::optional<LocalStateMetadata> load_(const boost::filesystem::path &metadataFilePath);
++  static LocalStateMetadata deserialize_(std::istream& stream);
++  static LocalStateMetadata generate_(const boost::filesystem::path &metadataFilePath, const cpputils::Data& encryptionKey);
++  void save_(const boost::filesystem::path &metadataFilePath) const;
++  void serialize_(std::ostream& stream) const;
+ 
+   LocalStateMetadata(uint32_t myClientId, cpputils::hash::Hash encryptionKey);
+ };
+

patches/source/cryfs/cryfs.SlackBuild

@@ -0,0 +1,145 @@
+#!/bin/bash
+
+# Copyright 2018, 2019, 2020  Eric Hameleers, Eindhoven, NL
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=cryfs
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-5_slack15.0}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Oddly, cryfs expects a static boost, so we'll need to hit it with the LART:
+export LDFLAGS="$SLKLDFLAGS -lboost_thread -lboost_program_options -lboost_filesystem -lboost_chrono -lcryptopp -lfuse"
+
+# gcc11 fixes:
+zcat $CWD/27587ea1acec5f939a31217f1c43953378f18821.patch.gz | patch -p1 --verbose || exit 1
+
+# Boost 1.77.0 fix:
+zcat $CWD/041b5baea5a4efceff33df2f316646b47a1cd7c0.patch.gz | patch -p1 --verbose || exit 1
+
+# Configure, build, and install:
+mkdir cmake-build
+cd cmake-build
+  cmake \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_INSTALL_MANDIR=/usr/man \
+    -DCMAKE_SKIP_RPATH=ON \
+    -DBUILD_TESTING=OFF \
+    -DBUILD_SHARED_LIBS=ON \
+    -DBUILD_TESTING=OFF \
+    -DBoost_INCLUDE_DIRS=/usr/include/boost \
+    -DBoost_USE_STATIC_LIBS=OFF \
+    -DCRYFS_UPDATE_CHECKS=OFF \
+    .. || exit 1
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+  # When compiling against a shared boost, these fail to install properly without help:
+  mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
+  install -m0755 ./src/cryfs-cli/libcryfs-cli.so $PKG/usr/lib${LIBDIRSUFFIX}/libcryfs-cli.so
+  install -m0755 ./src/cryfs-unmount/libcryfs-unmount.so $PKG/usr/lib${LIBDIRSUFFIX}/libcryfs-unmount.so
+cd ..
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  ChangeLog* README* LICENSE* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

patches/source/cryfs/cryfs.url

@@ -0,0 +1 @@
+https://github.com/cryfs/cryfs

patches/source/cryfs/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+cryfs: cryfs (cryptographic filesystem)
+cryfs:
+cryfs: CryFS encrypts your files, so you can safely store them anywhere. It
+cryfs: works well together with cloud services.
+cryfs:
+cryfs: Homepage: https://www.cryfs.org
+cryfs:
+cryfs:
+cryfs:
+cryfs:
+cryfs:

patches/source/cups-filters/cups-filters.SlackBuild

@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=cups-filters
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1_slack15.0}
+BUILD=${BUILD:-2_slack15.0}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -102,7 +102,7 @@ CXXFLAGS="$SLKCFLAGS -std=c++17 -fpermissive" \
   --disable-avahi \
   --disable-mutool \
   --disable-static \
-  --with-browseremoteprotocols=cups \
+  --with-browseremoteprotocols=none \
   --build=$ARCH-slackware-linux || exit 1
 
 make $NUMJOBS || exit 1

patches/source/espeak-ng/espeak-ng.SlackBuild

@@ -0,0 +1,125 @@
+#!/bin/bash
+
+# Copyright 2019  Eric Hameleers, Eindhoven, NL
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=espeak-ng
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-4_slack15.0}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+if [ ! -r configure ]; then
+  NOCONFIGURE=1 ./autogen.sh
+fi
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --disable-static \
+  --disable-rpath \
+  --build=$ARCH-slackware-linux || exit 1
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS* CHANGELOG* COPYING* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

patches/source/espeak-ng/espeak-ng.url

@@ -0,0 +1 @@
+https://github.com/espeak-ng/espeak-ng

patches/source/espeak-ng/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+          |-----handy-ruler------------------------------------------------------|
+espeak-ng: espeak-ng (text-to-speech synthesizer)
+espeak-ng:
+espeak-ng: The eSpeak NG (Next Generation) Text-to-Speech program is an open
+espeak-ng: source speech synthesizer that supports many languages and accents. It
+espeak-ng: is based on the eSpeak engine created by Jonathan Duddington. It uses
+espeak-ng: spectral formant synthesis by default which sounds robotic, but can be
+espeak-ng: configured to use Klatt formant synthesis or MBROLA to give it a more
+espeak-ng: natural sound.
+espeak-ng:
+espeak-ng: Homepage: https://github.com/espeak-ng/espeak-ng
+espeak-ng:

patches/source/libvncserver/libvncserver.SlackBuild

@@ -0,0 +1,137 @@
+#!/bin/bash
+
+# Copyright 2007, 2014  Heinz Wiesinger, Amsterdam, NL
+# Copyright 2008, 2009, 2010, 2011, 2012, 2015, 2018, 2019, 2020  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified by Robby Workman <rworkman at slackware.com>
+# Modified by Eric Hameleers <alien at slackware.com>
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=libvncserver
+VERSION=${VERSION:-$(echo LibVNCServer-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-4_slack15.0}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-libvncserver
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf LibVNCServer-$VERSION
+tar xvf $CWD/LibVNCServer-$VERSION.tar.?z* || exit 1
+cd LibVNCServer-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+#zcat $CWD/libvncserver.CMAKE_INSTALL_LIBDIR.diff.gz | patch -p1 --verbose || exit 1
+
+# Configure, build, and install:
+mkdir cmake-build
+cd cmake-build
+  cmake \
+    -DCMAKE_C_FLAGS="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_INSTALL_LIBDIR="lib$LIBDIRSUFFIX" \
+    -DCMAKE_SKIP_RPATH=ON \
+    -DDOC_INSTALL_DIR="doc" \
+    -DMAN_INSTALL_DIR=/usr/man \
+    .. || exit 1
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd ..
+
+if [ -x cmake-build/client_examples/SDLvncviewer ]; then
+  mkdir -p $PKG/usr/bin
+  cp -a cmake-build/client_examples/SDLvncviewer $PKG/usr/bin/SDLvncviewer
+fi
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/doc/libvncserver-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS* README* TODO* \
+  $PKG/usr/doc/libvncserver-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/libvncserver-$VERSION-$ARCH-$BUILD.txz
+

patches/source/libvncserver/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+libvncserver: libvncserver (VNC Server Library)
+libvncserver:
+libvncserver: LibVNCServer makes writing a VNC server (or more correctly,
+libvncserver: a program exporting a framebuffer via the Remote Frame Buffer
+libvncserver: protocol) easy.
+libvncserver:
+libvncserver: Homepage: https://libvnc.github.io/
+libvncserver:
+libvncserver:
+libvncserver:
+libvncserver:

patches/source/marisa/marisa.SlackBuild

@@ -0,0 +1,159 @@
+#!/bin/bash
+
+# Copyright 2016  Heinz Wiesinger, Amsterdam, The Netherlands
+# Copyright 2016, 2020  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=marisa
+SRCNAM=marisa-trie
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
+BUILD=${BUILD:-5_slack15.0}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-marisa
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z || exit 1
+cd $SRCNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+cd bindings/perl
+  perl Makefile.PL \
+    INC="-I$PKG/usr/include" \
+    LIBS="-L$PKG/usr/lib${LIBDIRSUFFIX}" \
+    PREFIX=/usr \
+    INSTALLDIRS=vendor
+
+  make $NUMJOBS || make || exit
+  make test || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd -
+
+cd bindings/python
+  python setup.py build_ext \
+    --include-dirs="$PKG/usr/include" \
+    --library-dirs="$PKG/usr/lib${LIBDIRSUFFIX}" || exit 1
+  python setup.py install \
+    --root=$PKG || exit 1
+cd -
+
+cd bindings/ruby
+  ruby extconf.rb \
+    --with-opt-include="$PKG/usr/include" \
+    --with-opt-lib="$PKG/usr/lib${LIBDIRSUFFIX}" \
+    --vendor
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd -
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Remove perllocal.pod and other special files that don't need to be installed,
+# as they will overwrite what's already on the system.
+find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true
+
+# Remove empty directories
+find $PKG -depth -type d -empty -delete || true
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a AUTHORS* ChangeLog* COPYING* INSTALL* NEWS* README* \
+  docs/readme* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n --remove-rpaths $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

patches/source/marisa/marisa.url

@@ -0,0 +1 @@
+https://github.com/s-yata/marisa-trie

patches/source/marisa/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+marisa: marisa (trie data structure library)
+marisa:
+marisa: Matching Algorithm with Recursively Implemented StorAge (MARISA) is a
+marisa: static and space-efficient trie data structure. And libmarisa is a
+marisa: C++ library to provide an implementation of MARISA. Also, the package
+marisa: of libmarisa contains a set of command line tools for building and
+marisa: operating a MARISA-based dictionary.
+marisa:
+marisa: Homepage: https://code.google.com/p/marisa-trie/
+marisa:
+marisa:

patches/source/mlt/mlt.SlackBuild

@@ -0,0 +1,122 @@
+#!/bin/bash
+
+# Copyright 2021  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=mlt
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2_slack15.0}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+mkdir cmake-build
+cd cmake-build
+  cmake \
+    -DCMAKE_C_FLAGS="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_INSTALL_MANDIR=/usr/man \
+    -DCMAKE_SKIP_RPATH=ON \
+    .. || exit 1
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd ..
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS* ChangeLog CHANGES COPYING* LICENSE* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

patches/source/mlt/mlt.deps

@@ -0,0 +1,4 @@
+frei0r-plugins
+opencv
+qt5
+vid.stab

patches/source/mlt/mlt.url

@@ -0,0 +1 @@
+https://github.com/mltframework/mlt

patches/source/mlt/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+mlt: mlt (open source multimedia framework)
+mlt:
+mlt: MLT is an open source multimedia framework, designed and developed for
+mlt: television broadcasting. It provides a toolkit for broadcasters, video
+mlt: editors, media players, transcoders, web streamers, and many more
+mlt: types of applications. The functionality of the system is provided via
+mlt: an assortment of ready to use tools, XML authoring components, and an
+mlt: extensible plug-in based API.
+mlt:
+mlt: Homepage: http://www.mltframework.org/
+mlt:

patches/source/openobex/openobex.SlackBuild

@@ -0,0 +1,147 @@
+#!/bin/bash
+
+# Copyright 2006, 2007, 2008, 2009, 2010, 2015, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=openobex
+VERSION=${VERSION:-$(echo $PKGNAM-*-Source.tar.?z* | rev | cut -f 3- -d . | cut -f 2 -d - | rev)}
+BUILD=${BUILD:-6_slack15.0}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+# Automatically determine architecture for build & packaging:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)    export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf ${PKGNAM}-${VERSION}-Source
+tar xvf $CWD/${PKGNAM}-${VERSION}-Source.tar.?z* || exit 1
+cd ${PKGNAM}-${VERSION}-Source || exit 1
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_SKIP_RPATH=ON \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DCMAKE_INSTALL_DOCDIR=/usr/doc/$PKGNAM-$VERSION \
+    -DCMAKE_BUILD_TYPE=Release ..
+  make $NUMJOBS || make || exit 1
+  make $NUMJOBS openobex-apps || make openobex-apps || exit 1
+  make doc || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd ..
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Relocate man pages:
+mv $PKG/usr/share/man $PKG/usr
+rmdir $PKG/usr/share 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.*
+      )
+    done
+  )
+fi
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
+

patches/source/openobex/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+openobex: openobex (Object Exchange protocol library)
+openobex:
+openobex: OpenOBEX is a free open source implementation of the Object Exchange
+openobex: (OBEX) protocol. OBEX is a session protocol and can best be
+openobex: described as a binary HTTP protocol. OBEX is optimised for ad-hoc
+openobex: wireless links and can be used to exchange all kinds of objects like
+openobex: files, pictures, calendar entries (vCal) and business cards (vCard).
+openobex:
+openobex: Visit the project here: http://www.openobex.org
+openobex:
+openobex:

patches/source/pkgtools/pkgtools.SlackBuild

@@ -30,7 +30,7 @@ PKGNAM=pkgtools
 # *** UPDATE THESE WITH EACH BUILD:
 VERSION=15.0
 ARCH=${ARCH:-noarch}
-BUILD=${BUILD:-43_slack15.0}
+BUILD=${BUILD:-44_slack15.0}
 
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
 # the name of the created package would be, and then exit. This information

patches/source/pkgtools/scripts/makepkg

@@ -416,7 +416,7 @@ if [ $OLDROOTPERMS -ne 755 ]; then
 fi
 
 # Detect/warn/remove rpaths from ELF objects:
-find . -type f | xargs file | grep ELF | cut -f 1 -d : | while read ELFOBJ ; do
+for ELFOBJ in $(find . -type f | xargs file | grep ' ELF ' | cut -f 1 -d :) ; do
   if objdump -p "$ELFOBJ" 2>/dev/null | grep -q R.*PATH ; then
     if [ "$REMOVE_RPATHS" = "true" ]; then
       echo "Removing rpath from: $ELFOBJ"
@@ -429,8 +429,8 @@ find . -type f | xargs file | grep ELF | cut -f 1 -d : | while read ELFOBJ ; do
     else # just warn:
       if objdump -p "$ELFOBJ" 2>/dev/null | grep -q R.*PATH.*/tmp ; then
         echo "WARNING: */tmp* rpath found in $ELFOBJ: $(objdump -p "$ELFOBJ" 2>/dev/null | grep R.*PATH)"
-        # This is important, so give a better chance to notice this:
+        # This is important, so we'll notify again after the package is built:
-        sleep 10
+        NOTIFY_INSECURE_RPATH="  WARNING: */tmp* rpath found in $ELFOBJ: $(objdump -p "$ELFOBJ" 2>/dev/null | grep R.*PATH)"
       else
         echo "WARNING: rpath found in $ELFOBJ: $(objdump -p "$ELFOBJ" 2>/dev/null | grep R.*PATH)"
       fi
@@ -500,4 +500,8 @@ fi
 
 echo
 echo "Slackware package ${TARGET_NAME}/${TAR_NAME}.${EXTENSION} created."
+if [ ! -z "$NOTIFY_INSECURE_RPATH" ]; then
+  echo "WARNING: detected at least one insecure /tmp rpath:"
+  echo $NOTIFY_INSECURE_RPATH
+fi
 echo

patches/source/spirv-llvm-translator/SPIRV-LLVM-Translator.url

@@ -0,0 +1 @@
+https://github.com/KhronosGroup/SPIRV-LLVM-Translator

patches/source/spirv-llvm-translator/fetch-SPIRV-LLVM-Translator.sh

@@ -0,0 +1,52 @@
+#!/bin/sh
+
+# Copyright 2021  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=SPIRV-LLVM-Translator
+
+# Pull a stable branch + patches
+BRANCH=${1:-llvm_release_130}
+
+# Clear download area:
+rm -rf ${PKGNAM}
+
+# Clone repository:
+git clone https://github.com/KhronosGroup/${PKGNAM}
+
+# checkout $BRANCH:
+( cd ${PKGNAM} 
+  git checkout $BRANCH || exit 1
+)
+
+HEADISAT="$( cd ${PKGNAM} && git log -1 --format=%h )"
+DATE="$( cd ${PKGNAM} && git log -1 --format=%cd --date=format:%Y%m%d )"
+LONGDATE="$( cd ${PKGNAM} && git log -1 --format=%cd --date=format:%c )"
+# Cleanup.  We're not packing up the whole git repo.
+( cd ${PKGNAM} && find . -type d -name ".git*" -exec rm -rf {} \; 2> /dev/null )
+mv ${PKGNAM} ${PKGNAM}-${DATE}_${HEADISAT}
+tar cf ${PKGNAM}-${DATE}_${HEADISAT}.tar ${PKGNAM}-${DATE}_${HEADISAT}
+plzip -9 -f ${PKGNAM}-${DATE}_${HEADISAT}.tar
+rm -rf ${PKGNAM}-${DATE}_${HEADISAT}
+touch -d "$LONGDATE" ${PKGNAM}-${DATE}_${HEADISAT}.tar.lz
+echo
+echo "${PKGNAM} branch $BRANCH with HEAD at $HEADISAT packaged as ${PKGNAM}-${DATE}_${HEADISAT}.tar.lz"
+echo

patches/source/spirv-llvm-translator/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                     |-----handy-ruler------------------------------------------------------|
+spirv-llvm-translator: spirv-llvm-translator (LLVM/SPIR-V Bi-Directional Translator)
+spirv-llvm-translator:
+spirv-llvm-translator: This is the LLVM/SPIR-V Bi-Directional Translator, a library and tool
+spirv-llvm-translator: for translation between LLVM IR and SPIR-V.
+spirv-llvm-translator:
+spirv-llvm-translator: Homepage: https://github.com/KhronosGroup/SPIRV-LLVM-Translator
+spirv-llvm-translator:
+spirv-llvm-translator:
+spirv-llvm-translator:
+spirv-llvm-translator:
+spirv-llvm-translator:

patches/source/spirv-llvm-translator/spirv-llvm-translator.SlackBuild

@@ -0,0 +1,131 @@
+#!/bin/bash
+
+# Copyright 2021  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=spirv-llvm-translator
+VERSION=${VERSION:-$(echo SPIRV-LLVM-Translator-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2_slack15.0}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf SPIRV-LLVM-Translator-${VERSION}
+tar xvf $CWD/SPIRV-LLVM-Translator-$VERSION.tar.?z* || exit 1
+cd SPIRV-LLVM-Translator-$VERSION || exit 1
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+# This git pull needs a specific set of headers. These were obtained by letting
+# the build download them, and then tarring them up and pointing to them with
+# the -DLLVM_EXTERNAL_SPIRV_HEADERS_SOURCE_DIR option below.
+tar xf $CWD/SPIRV-Headers.tar.lz
+
+# Build and install:
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_SKIP_RPATH=ON \
+    -DLIB_INSTALL_DIR=/usr/lib${LIBDIRSUFFIX} \
+    -DMAN_INSTALL_DIR=/usr/man \
+    -DSYSCONF_INSTALL_DIR=/etc \
+    -DINCLUDE_INSTALL_DIR=/usr/include \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DBUILD_SHARED_LIBS=ON \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DLLVM_EXTERNAL_SPIRV_HEADERS_SOURCE_DIR=$TMP/SPIRV-LLVM-Translator-$VERSION/SPIRV-Headers \
+    ..
+   make $NUMJOBS || make || exit 1
+   make $NUMJOBS llvm-spirv || make llvm-spirv || exit 1
+   make install DESTDIR=$PKG || exit 1
+cd -
+
+mkdir -p $PKG/usr/bin
+install -m 755 build/tools/llvm-spirv/llvm-spirv $PKG/usr/bin/
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  LICENSE.txt README* *.md \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
+

recompress.sh

@@ -1196,7 +1196,8 @@ gzip ./source/x/ibus/doinst.sh
 gzip ./source/x/ibus/emoji-test.txt
 gzip ./source/x/xcm/xcm.udev.rules.diff
 gzip ./source/x/libva/doinst.sh
-gzip ./testing/source/bind/doinst.sh
+gzip ./testing/source/llvm/clang.toolchains.32-bit.triple.diff
+gzip ./testing/source/rust/link_libffi.diff
 gzip ./patches/source/bluez/bluez-5.51-obexd_without_systemd-1.patch
 gzip ./patches/source/bluez/doinst.sh
 gzip ./patches/source/glibc/glibc.ru_RU.CP1251.diff
@@ -1491,10 +1492,15 @@ gzip ./patches/source/qt5/patches/qt5.mysql.h.diff
 gzip ./patches/source/qt5/patches/qt5-qtwebengine-gcc11.patch
 gzip ./patches/source/qt5/doinst.sh
 gzip ./patches/source/netatalk/doinst.sh
+gzip ./patches/source/cryfs/27587ea1acec5f939a31217f1c43953378f18821.patch
+gzip ./patches/source/cryfs/041b5baea5a4efceff33df2f316646b47a1cd7c0.patch
 gzip ./pasture/source/php/php-fpm.conf.diff
 gzip ./pasture/source/php/doinst.sh
 gzip ./pasture/source/php/PHP-5.6.31-OpenSSL-1.1.0-compatibility-20170801.patch
 gzip ./pasture/source/php/php.ini-development.diff
+gzip ./pasture/source/samba/smb.conf.diff
+gzip ./pasture/source/samba/doinst.sh
+gzip ./pasture/source/samba/samba.libsmbclient.h.ffmpeg.compat.diff
 bzip2 ./extra/source/xv/xv-3.10a-enhancements.20070520-20081216.diff
 bzip2 ./extra/source/xv/xv-3.10a-jumbo-additions.diff
 bzip2 ./extra/source/xv/xv-3.10a-jumbo-fix-enh-patch-20070520.txt

source/a/kernel-firmware/kernel-firmware.SlackBuild

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2011, 2016, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2011, 2016, 2018, 2023  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -25,6 +25,10 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=kernel-firmware
 ARCH=noarch
 BUILD=${BUILD:-1}
+# Compress the firmware blobs?
+# Default is "none" for no compression.
+# Other types known to be currently supported are "xz" and "zstd".
+COMPRESSION=${COMPRESSION:-none}
 
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
 # the name of the created package would be, and then exit. This information
@@ -56,13 +60,19 @@ DATE="$(lynx -dump -width=256 https://git.kernel.org/pub/scm/linux/kernel/git/fi
 HEADISAT="$(lynx -dump -width=256 https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=HEAD | grep "    commit   " | head -n 1 | cut -f 2 -d ] | cut -b 1-7)"
 find . -name ".git*" -exec rm -rf "{}" \+
 chown -R root:root .
-mkdir -p lib
+mkdir -p lib/firmware
-mv linux-firmware lib/firmware
+
-# Make sure that symlinks are created by running "make install":
+# Install the firmware from the download directory using "make $INSTALLTARGET":
-( cd lib/firmware
+case $COMPRESSION in
-  echo "Running make DESTDIR=$PKG install..."
+  xz) INSTALLTARGET="install-xz" ;;
-  make DESTDIR=$PKG install 2> /dev/null
+  zstd) INSTALLTARGET="install-zst" ;;
+  *) INSTALLTARGET="install" ;;
+esac
+( cd linux-firmware
+  echo "Running make DESTDIR=$PKG ${INSTALLTARGET}..."
+  make DESTDIR=$PKG $INSTALLTARGET 2> /dev/null
 )
+rm -rf linux-firmware
 
 # Remove sources for carl9170fw:
 ( cd $PKG/lib/firmware

testing/source/bind/3link.sh

@@ -1,136 +0,0 @@
-rm -f lwres_addr_parse.3
-ln -sf lwres_resutil.3 lwres_addr_parse.3
-rm -f lwres_buffer_add.3
-ln -sf lwres_buffer.3 lwres_buffer_add.3
-rm -f lwres_buffer_back.3
-ln -sf lwres_buffer.3 lwres_buffer_back.3
-rm -f lwres_buffer_clear.3
-ln -sf lwres_buffer.3 lwres_buffer_clear.3
-rm -f lwres_buffer_first.3
-ln -sf lwres_buffer.3 lwres_buffer_first.3
-rm -f lwres_buffer_forward.3
-ln -sf lwres_buffer.3 lwres_buffer_forward.3
-rm -f lwres_buffer_getmem.3
-ln -sf lwres_buffer.3 lwres_buffer_getmem.3
-rm -f lwres_buffer_getuint16.3
-ln -sf lwres_buffer.3 lwres_buffer_getuint16.3
-rm -f lwres_buffer_getuint32.3
-ln -sf lwres_buffer.3 lwres_buffer_getuint32.3
-rm -f lwres_buffer_getuint8.3
-ln -sf lwres_buffer.3 lwres_buffer_getuint8.3
-rm -f lwres_buffer_init.3
-ln -sf lwres_buffer.3 lwres_buffer_init.3
-rm -f lwres_buffer_invalidate.3
-ln -sf lwres_buffer.3 lwres_buffer_invalidate.3
-rm -f lwres_buffer_putmem.3
-ln -sf lwres_buffer.3 lwres_buffer_putmem.3
-rm -f lwres_buffer_putuint16.3
-ln -sf lwres_buffer.3 lwres_buffer_putuint16.3
-rm -f lwres_buffer_putuint32.3
-ln -sf lwres_buffer.3 lwres_buffer_putuint32.3
-rm -f lwres_buffer_putuint8.3
-ln -sf lwres_buffer.3 lwres_buffer_putuint8.3
-rm -f lwres_buffer_subtract.3
-ln -sf lwres_buffer.3 lwres_buffer_subtract.3
-rm -f lwres_conf_clear.3
-ln -sf lwres_config.3 lwres_conf_clear.3
-rm -f lwres_conf_get.3
-ln -sf lwres_config.3 lwres_conf_get.3
-rm -f lwres_conf_init.3
-ln -sf lwres_config.3 lwres_conf_init.3
-rm -f lwres_conf_parse.3
-ln -sf lwres_config.3 lwres_conf_parse.3
-rm -f lwres_conf_print.3
-ln -sf lwres_config.3 lwres_conf_print.3
-rm -f lwres_context_allocmem.3
-ln -sf lwres_context.3 lwres_context_allocmem.3
-rm -f lwres_context_create.3
-ln -sf lwres_context.3 lwres_context_create.3
-rm -f lwres_context_destroy.3
-ln -sf lwres_context.3 lwres_context_destroy.3
-rm -f lwres_context_freemem.3
-ln -sf lwres_context.3 lwres_context_freemem.3
-rm -f lwres_context_initserial.3
-ln -sf lwres_context.3 lwres_context_initserial.3
-rm -f lwres_context_nextserial.3
-ln -sf lwres_context.3 lwres_context_nextserial.3
-rm -f lwres_context_sendrecv.3
-ln -sf lwres_context.3 lwres_context_sendrecv.3
-rm -f lwres_endhostent.3
-ln -sf lwres_gethostent.3 lwres_endhostent.3
-rm -f lwres_endhostent_r.3
-ln -sf lwres_gethostent.3 lwres_endhostent_r.3
-rm -f lwres_freeaddrinfo.3
-ln -sf lwres_getaddrinfo.3 lwres_freeaddrinfo.3
-rm -f lwres_freehostent.3
-ln -sf lwres_getipnode.3 lwres_freehostent.3
-rm -f lwres_gabnrequest_free.3
-ln -sf lwres_gabn.3 lwres_gabnrequest_free.3
-rm -f lwres_gabnrequest_parse.3
-ln -sf lwres_gabn.3 lwres_gabnrequest_parse.3
-rm -f lwres_gabnrequest_render.3
-ln -sf lwres_gabn.3 lwres_gabnrequest_render.3
-rm -f lwres_gabnresponse_free.3
-ln -sf lwres_gabn.3 lwres_gabnresponse_free.3
-rm -f lwres_gabnresponse_parse.3
-ln -sf lwres_gabn.3 lwres_gabnresponse_parse.3
-rm -f lwres_gabnresponse_render.3
-ln -sf lwres_gabn.3 lwres_gabnresponse_render.3
-rm -f lwres_getaddrsbyname.3
-ln -sf lwres_resutil.3 lwres_getaddrsbyname.3
-rm -f lwres_gethostbyaddr.3
-ln -sf lwres_gethostent.3 lwres_gethostbyaddr.3
-rm -f lwres_gethostbyaddr_r.3
-ln -sf lwres_gethostent.3 lwres_gethostbyaddr_r.3
-rm -f lwres_gethostbyname.3
-ln -sf lwres_gethostent.3 lwres_gethostbyname.3
-rm -f lwres_gethostbyname2.3
-ln -sf lwres_gethostent.3 lwres_gethostbyname2.3
-rm -f lwres_gethostbyname_r.3
-ln -sf lwres_gethostent.3 lwres_gethostbyname_r.3
-rm -f lwres_gethostent_r.3
-ln -sf lwres_gethostent.3 lwres_gethostent_r.3
-rm -f lwres_getipnodebyaddr.3
-ln -sf lwres_getipnode.3 lwres_getipnodebyaddr.3
-rm -f lwres_getipnodebyname.3
-ln -sf lwres_getipnode.3 lwres_getipnodebyname.3
-rm -f lwres_getnamebyaddr.3
-ln -sf lwres_resutil.3 lwres_getnamebyaddr.3
-rm -f lwres_gnbarequest_free.3
-ln -sf lwres_gnba.3 lwres_gnbarequest_free.3
-rm -f lwres_gnbarequest_parse.3
-ln -sf lwres_gnba.3 lwres_gnbarequest_parse.3
-rm -f lwres_gnbarequest_render.3
-ln -sf lwres_gnba.3 lwres_gnbarequest_render.3
-rm -f lwres_gnbaresponse_free.3
-ln -sf lwres_gnba.3 lwres_gnbaresponse_free.3
-rm -f lwres_gnbaresponse_parse.3
-ln -sf lwres_gnba.3 lwres_gnbaresponse_parse.3
-rm -f lwres_gnbaresponse_render.3
-ln -sf lwres_gnba.3 lwres_gnbaresponse_render.3
-rm -f lwres_herror.3
-ln -sf lwres_hstrerror.3 lwres_herror.3
-rm -f lwres_lwpacket_parseheader.3
-ln -sf lwres_packet.3 lwres_lwpacket_parseheader.3
-rm -f lwres_lwpacket_renderheader.3
-ln -sf lwres_packet.3 lwres_lwpacket_renderheader.3
-rm -f lwres_net_ntop.3
-ln -sf lwres_inetntop.3 lwres_net_ntop.3
-rm -f lwres_nooprequest_free.3
-ln -sf lwres_noop.3 lwres_nooprequest_free.3
-rm -f lwres_nooprequest_parse.3
-ln -sf lwres_noop.3 lwres_nooprequest_parse.3
-rm -f lwres_nooprequest_render.3
-ln -sf lwres_noop.3 lwres_nooprequest_render.3
-rm -f lwres_noopresponse_free.3
-ln -sf lwres_noop.3 lwres_noopresponse_free.3
-rm -f lwres_noopresponse_parse.3
-ln -sf lwres_noop.3 lwres_noopresponse_parse.3
-rm -f lwres_noopresponse_render.3
-ln -sf lwres_noop.3 lwres_noopresponse_render.3
-rm -f lwres_sethostent.3
-ln -sf lwres_gethostent.3 lwres_sethostent.3
-rm -f lwres_sethostent_r.3
-ln -sf lwres_gethostent.3 lwres_sethostent_r.3
-rm -f lwres_string_parse.3
-ln -sf lwres_resutil.3 lwres_string_parse.3

testing/source/bind/bind.SlackBuild

@@ -1,180 +0,0 @@
-#!/bin/bash
-
-# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018, 2019, 2020, 2021  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-cd $(dirname $0) ; CWD=$(pwd)
-
-PKGNAM=bind
-VERSION=${VERSION:-$(echo ${PKGNAM}-[0-9]*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1_slack15.0}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
-# the name of the created package would be, and then exit. This information
-# could be useful to other scripts.
-if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
-  echo "$PKGNAM-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz"
-  exit 0
-fi
-
-NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
-
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-${PKGNAM}
-rm -rf $PKG
-mkdir -p $TMP $PKG/etc/default
-
-if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-fi
-
-cd $TMP
-rm -rf ${PKGNAM}-${VERSION}
-tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z || exit 1
-cd ${PKGNAM}-$VERSION || exit 1
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \+ -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \+
-
-# Detect krb5:
-if ls /lib*/libgssapi_krb5* 1> /dev/null 2> /dev/null ; then
-  GSSAPI=" --with-gssapi "
-else
-  GSSAPI=" "
-fi
-
-# Configure:
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --with-libtool \
-  --with-libidn2 \
-  --with-python=/usr/bin/python3 \
-  --mandir=/usr/man \
-  --enable-shared \
-  --disable-static \
-  --with-openssl=/usr \
-  $GSSAPI \
-  --build=$ARCH-slackware-linux || exit 1
-
-# Build and install:
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-# Don't ship .la files:
-rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
-
-# These probably were not supposed to be installed:
-find . -name .deps -exec rm -rf "{}" \;
-find . -name .libs -exec rm -rf "{}" \;
-
-# We like symlinks.
-( cd $PKG/usr/sbin
-  ln -sf named lwresd
-)
-
-# We like a lot of symlinks.
-if [ -d $PKG/usr/man/man3 ]; then
-  ( cd $PKG/usr/man/man3
-    sh $CWD/3link.sh
-  )
-fi
-
-# Install init script:
-mkdir -p $PKG/etc/rc.d
-cp -a $CWD/rc.bind $PKG/etc/rc.d/rc.bind.new
-chmod 644 $PKG/etc/rc.d/rc.bind.new
-
-# Install default options file for named:
-cat $CWD/default.named > $PKG/etc/default/named.new
-
-# Fix library perms:
-chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/*
-
-# Strip binaries:
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# Compress manual pages:
-find $PKG/usr/man -type f -exec gzip -9 {} \+
-for i in $( find $PKG/usr/man -type l ) ; do
-  ln -s $( readlink $i ).gz $i.gz
-  rm $i
-done
-
-# Add a documentation directory:
-mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
-cp -a \
-  CHANGES COPYRIGHT FAQ* README* \
-  doc/arm doc/misc \
-  $PKG/usr/doc/${PKGNAM}-$VERSION 
-
-# This one should have the correct perms of the config file:
-if [ -r $PKG/usr/doc/${PKGNAM}-$VERSION/misc/rndc.conf-sample ]; then
-  chmod 644 $PKG/usr/doc/${PKGNAM}-$VERSION/misc/rndc.conf-sample
-fi
-
-# One format of this is plenty.  Especially get rid of the bloated PDF.
-( cd $PKG/usr/doc/bind-$VERSION/arm
-  rm -f Makefile* *.pdf *.xml README.SGML latex-fixup.pl
-)
-
-# Add sample config files for a simple caching nameserver:
-mkdir -p $PKG/var/named/caching-example
-cat $CWD/caching-example/named.conf > $PKG/etc/named.conf.new
-cat $CWD/caching-example/localhost.zone > $PKG/var/named/caching-example/localhost.zone
-cat $CWD/caching-example/named.local > $PKG/var/named/caching-example/named.local
-cat $CWD/caching-example/named.root > $PKG/var/named/caching-example/named.root
-# This name is deprecated, but having it here doesn't hurt in case
-# an old configuration file wants it:
-cat $CWD/caching-example/named.root > $PKG/var/named/caching-example/named.ca
-
-mkdir -p $PKG/install
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz
-

testing/source/bind/caching-example/localhost.zone

@@ -1,11 +0,0 @@
-$TTL	86400
-$ORIGIN localhost.
-@			1D IN SOA	@ root (
-					42		; serial (d. adams)
-					3H		; refresh
-					15M		; retry
-					1W		; expiry
-					1D )		; minimum
-
-			1D IN NS	@
-			1D IN A		127.0.0.1

testing/source/bind/caching-example/named.conf

@@ -1,31 +0,0 @@
-options {
-	directory "/var/named";
-	/*
-	 * If there is a firewall between you and nameservers you want
-	 * to talk to, you might need to uncomment the query-source
-	 * directive below.  Previous versions of BIND always asked
-	 * questions using port 53, but BIND 8.1 uses an unprivileged
-	 * port by default.
-	 */
-	// query-source address * port 53;
-};
-
-// 
-// a caching only nameserver config
-// 
-zone "." IN {
-	type hint;
-	file "caching-example/named.root";
-};
-
-zone "localhost" IN {
-	type master;
-	file "caching-example/localhost.zone";
-	allow-update { none; };
-};
-
-zone "0.0.127.in-addr.arpa" IN {
-	type master;
-	file "caching-example/named.local";
-	allow-update { none; };
-};

testing/source/bind/caching-example/named.local

@@ -1,10 +0,0 @@
-$TTL	86400
-@       IN      SOA     localhost. root.localhost.  (
-                                      2011032500 ; Serial
-                                      28800      ; Refresh
-                                      14400      ; Retry
-                                      3600000    ; Expire
-                                      86400 )    ; Minimum
-              IN      NS      localhost.
-
-1       IN      PTR     localhost.

testing/source/bind/caching-example/named.root

@@ -1,92 +0,0 @@
-;       This file holds the information on root name servers needed to 
-;       initialize cache of Internet domain name servers
-;       (e.g. reference this file in the "cache  .  <file>"
-;       configuration file of BIND domain name servers). 
-; 
-;       This file is made available by InterNIC 
-;       under anonymous FTP as
-;           file                /domain/named.cache 
-;           on server           FTP.INTERNIC.NET
-;       -OR-                    RS.INTERNIC.NET
-; 
-;       last update:     July 30, 2019 
-;       related version of root zone:     2019073000
-; 
-; FORMERLY NS.INTERNIC.NET 
-;
-.                        3600000      NS    A.ROOT-SERVERS.NET.
-A.ROOT-SERVERS.NET.      3600000      A     198.41.0.4
-A.ROOT-SERVERS.NET.      3600000      AAAA  2001:503:ba3e::2:30
-; 
-; FORMERLY NS1.ISI.EDU 
-;
-.                        3600000      NS    B.ROOT-SERVERS.NET.
-B.ROOT-SERVERS.NET.      3600000      A     199.9.14.201
-B.ROOT-SERVERS.NET.      3600000      AAAA  2001:500:200::b
-; 
-; FORMERLY C.PSI.NET 
-;
-.                        3600000      NS    C.ROOT-SERVERS.NET.
-C.ROOT-SERVERS.NET.      3600000      A     192.33.4.12
-C.ROOT-SERVERS.NET.      3600000      AAAA  2001:500:2::c
-; 
-; FORMERLY TERP.UMD.EDU 
-;
-.                        3600000      NS    D.ROOT-SERVERS.NET.
-D.ROOT-SERVERS.NET.      3600000      A     199.7.91.13
-D.ROOT-SERVERS.NET.      3600000      AAAA  2001:500:2d::d
-; 
-; FORMERLY NS.NASA.GOV
-;
-.                        3600000      NS    E.ROOT-SERVERS.NET.
-E.ROOT-SERVERS.NET.      3600000      A     192.203.230.10
-E.ROOT-SERVERS.NET.      3600000      AAAA  2001:500:a8::e
-; 
-; FORMERLY NS.ISC.ORG
-;
-.                        3600000      NS    F.ROOT-SERVERS.NET.
-F.ROOT-SERVERS.NET.      3600000      A     192.5.5.241
-F.ROOT-SERVERS.NET.      3600000      AAAA  2001:500:2f::f
-; 
-; FORMERLY NS.NIC.DDN.MIL
-;
-.                        3600000      NS    G.ROOT-SERVERS.NET.
-G.ROOT-SERVERS.NET.      3600000      A     192.112.36.4
-G.ROOT-SERVERS.NET.      3600000      AAAA  2001:500:12::d0d
-; 
-; FORMERLY AOS.ARL.ARMY.MIL
-;
-.                        3600000      NS    H.ROOT-SERVERS.NET.
-H.ROOT-SERVERS.NET.      3600000      A     198.97.190.53
-H.ROOT-SERVERS.NET.      3600000      AAAA  2001:500:1::53
-; 
-; FORMERLY NIC.NORDU.NET
-;
-.                        3600000      NS    I.ROOT-SERVERS.NET.
-I.ROOT-SERVERS.NET.      3600000      A     192.36.148.17
-I.ROOT-SERVERS.NET.      3600000      AAAA  2001:7fe::53
-; 
-; OPERATED BY VERISIGN, INC.
-;
-.                        3600000      NS    J.ROOT-SERVERS.NET.
-J.ROOT-SERVERS.NET.      3600000      A     192.58.128.30
-J.ROOT-SERVERS.NET.      3600000      AAAA  2001:503:c27::2:30
-; 
-; OPERATED BY RIPE NCC
-;
-.                        3600000      NS    K.ROOT-SERVERS.NET.
-K.ROOT-SERVERS.NET.      3600000      A     193.0.14.129
-K.ROOT-SERVERS.NET.      3600000      AAAA  2001:7fd::1
-; 
-; OPERATED BY ICANN
-;
-.                        3600000      NS    L.ROOT-SERVERS.NET.
-L.ROOT-SERVERS.NET.      3600000      A     199.7.83.42
-L.ROOT-SERVERS.NET.      3600000      AAAA  2001:500:9f::42
-; 
-; OPERATED BY WIDE
-;
-.                        3600000      NS    M.ROOT-SERVERS.NET.
-M.ROOT-SERVERS.NET.      3600000      A     202.12.27.33
-M.ROOT-SERVERS.NET.      3600000      AAAA  2001:dc3::35
-; End of file

testing/source/bind/default.named

@@ -1,12 +0,0 @@
-# User to run named as:
-NAMED_USER=named
-
-# Group to use for chowning named related files and directories.
-# By default, named will also run as the primary group of $NAMED_USER,
-# which will usually be the same as what's listed below, but not
-# necessarily if something other than the default of "named" is used.
-NAMED_GROUP=named
-
-# Options to run named with. At least -u $NAMED_USER is required, but
-# additional options may be added if needed.
-NAMED_OPTIONS="-u $NAMED_USER"

testing/source/bind/doinst.sh

@@ -1,38 +0,0 @@
-#!/bin/sh
-config() {
-  NEW="$1"
-  OLD="`dirname $NEW`/`basename $NEW .new`"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.bind.new:
-if [ -e etc/rc.d/rc.bind ]; then
-  cp -a etc/rc.d/rc.bind etc/rc.d/rc.bind.new.incoming
-  cat etc/rc.d/rc.bind.new > etc/rc.d/rc.bind.new.incoming
-  mv etc/rc.d/rc.bind.new.incoming etc/rc.d/rc.bind.new
-fi
-
-config etc/default/named.new
-config etc/named.conf.new
-config etc/rc.d/rc.bind.new
-
-# Add a /var/named if it doesn't exist:
-if [ ! -d var/named ]; then
-  mkdir -p var/named
-  chmod 755 var/named
-fi
-
-# Generate /etc/rndc.key if there's none there,
-# and there's also no /etc/rndc.conf (the other
-# way to set this up).
-if [ ! -r etc/rndc.key -a ! -r /etc/rndc.conf ]; then
-  chroot . /sbin/ldconfig
-  chroot . /usr/sbin/rndc-confgen -a 2> /dev/null
-  chroot . /bin/chown named:named /etc/rndc.key 2> /dev/null
-fi

testing/source/bind/rc.bind

@@ -1,136 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the BIND name server daemon (named).
-
-# Start BIND. By default this will run with user "named". If you'd like to
-# change this or other options, see: /etc/default/named
-
-# You might also consider running BIND in a "chroot jail",
-# a discussion of which may be found in
-# /usr/doc/Linux-HOWTOs/Chroot-BIND-HOWTO.
- 
-# One last note: rndc has a lot of other nice features that it is not
-# within the scope of this start/stop/restart script to support.
-# For more details, see "man rndc" or just type "rndc" to see the options.
-
-# Load command defaults:
-if [ -f /etc/default/named ] ; then . /etc/default/named ; fi
-if [ -f /etc/default/rndc ] ; then . /etc/default/rndc ; fi
-
-# In case /etc/default/named was missing, provide fallbacks:
-if [ -z "$NAMED_USER" ]; then
-  NAMED_USER="named"
-fi
-if [ -z "$NAMED_GROUP" ]; then
-  NAMED_GROUP="named"
-fi
-if [ -z "$NAMED_OPTIONS" ]; then
-  NAMED_OPTIONS="-u $NAMED_USER"
-fi
-
-# Sanity check. If /usr/sbin/named is missing then it
-# doesn't make much sense to try to run this script:
-if [ ! -x /usr/sbin/named ]; then
-  echo "/etc/rc.d/rc.bind:  no /usr/sbin/named found (or not executable); cannot start."
-  exit 1
-fi
-
-# Start BIND. As many times as you like. ;-)
-# Seriously, don't run "rc.bind start" if BIND is already
-# running or you'll get more than one copy running.
-bind_start() {
-  # Make sure /var/run/named exists:
-  mkdir -p /var/run/named
-  # Make sure that /var/run/named has correct ownership:
-  chown -R ${NAMED_USER}:${NAMED_GROUP} /var/run/named
-  # Make sure that /var/named has correct ownership:
-  chown -R ${NAMED_USER}:${NAMED_GROUP} /var/named
-  if [ -r /etc/rndc.key ]; then
-    # Make sure that /etc/rndc.key has correct ownership:
-    chown ${NAMED_USER}:${NAMED_GROUP} /etc/rndc.key
-  fi
-  # Start named:
-  if [ -x /usr/sbin/named ]; then
-    echo "Starting BIND:  /usr/sbin/named $NAMED_OPTIONS"
-    /usr/sbin/named $NAMED_OPTIONS
-    sleep 1
-  fi
-  # Make sure that named started:
-  if ! ps axc | grep -q named ; then
-    echo "WARNING:  named did not start."
-    echo "Attempting to start named again:  /usr/sbin/named $NAMED_OPTIONS"
-    /usr/sbin/named $NAMED_OPTIONS
-    sleep 1
-    if ps axc | grep -q named ; then
-      echo "SUCCESS:  named started."
-    else
-      echo "FAILED: Sorry, a second attempt to start named has also failed."
-      echo "There may be a configuration error that needs fixing. Good luck!"
-    fi
-  fi
-}
-
-# Stop all running copies of BIND (/usr/sbin/named):
-bind_stop() {
-  # If you've set up rndc, we can use this to make shutting down BIND faster.
-  # If you have /etc/rndc.conf, or you have /etc/rndc.key, or $RNDC_OPTIONS is
-  # not empty, we'll try it.
-  if [ -r /etc/rndc.conf -o -r /etc/rndc.key -o ! -z "$RNDC_OPTIONS" ]; then
-    if [ -z "$RNDC_OPTIONS" ]; then
-      echo "Stopping BIND:  /usr/sbin/rndc stop"
-    else
-      echo "Stopping BIND:  /usr/sbin/rndc $RNDC_OPTIONS stop"
-    fi
-    /usr/sbin/rndc $RNDC_OPTIONS stop
-    # Wait for up to $TIMEOUT seconds before moving on to try killall:
-    TIMEOUT=${TIMEOUT:-10}
-    while [ "$TIMEOUT" -gt "0" ]; do
-      # Exit the timeout loop if there are no named processes:
-      if ! ps axco command | grep -q -e "^named$"; then
-        break
-      fi
-      sleep 1
-      TIMEOUT=$(expr $TIMEOUT - 1)
-    done
-  fi
-  # Kill named processes if there are any running:
-  if ps axco command | grep -q -e "^named$"; then
-    echo "Stopping all named processes in this namespace:  /bin/killall -SIGTERM --ns \$\$ named"
-    /bin/killall -SIGTERM --ns $$ named 2> /dev/null
-  fi
-}
-
-# Reload BIND:
-bind_reload() {
-  /usr/sbin/rndc $RNDC_OPTIONS reload
-}
-
-# Restart BIND:
-bind_restart() {
-  bind_stop
-  bind_start
-}
-
-# Get BIND status:
-bind_status() {
-  /usr/sbin/rndc $RNDC_OPTIONS status
-}
-
-case "$1" in
-'start')
-  bind_start
-  ;;
-'stop')
-  bind_stop
-  ;;
-'reload')
-  bind_reload
-  ;;
-'restart')
-  bind_restart
-  ;;
-'status')
-  bind_status
-  ;;
-*)
-  echo "usage $0 start|stop|reload|restart|status"
-esac

testing/source/bind/slack-desc

@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-bind: bind (DNS server and utilities)
-bind:
-bind: The named daemon and support utilities such as dig, host, and
-bind: nslookup. Sample configuration files for running a simple caching
-bind: nameserver are included. Documentation for advanced name server
-bind: setup can be found in /usr/doc/bind-9.x.x/.
-bind:
-bind:
-bind:
-bind:
-bind:

testing/source/llvm/clang.toolchains.32-bit.triple.diff

@@ -0,0 +1,10 @@
+--- ./tools/clang/lib/Driver/ToolChains/Gnu.cpp.orig	2024-03-06 13:59:35.328900971 -0600
++++ ./tools/clang/lib/Driver/ToolChains/Gnu.cpp	2024-03-06 14:02:01.218892901 -0600
+@@ -2490,6 +2490,7 @@
+   static const char *const X86Triples[] = {
+       "i586-linux-gnu",      "i686-linux-gnu",        "i686-pc-linux-gnu",
+       "i386-redhat-linux6E", "i686-redhat-linux",     "i386-redhat-linux",
++      "i586-slackware-linux",  "i686-slackware-linux",
+       "i586-suse-linux",     "i686-montavista-linux",
+   };
+ 

testing/source/llvm/libclc.SlackBuild

@@ -0,0 +1,125 @@
+#!/bin/bash
+
+# Slackware build script for libclc
+
+# Copyright 2016  Heinz Wiesinger, Amsterdam, The Netherlands
+# Copyright 2017, 2018, 2021, 2024  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=libclc
+VERSION=${VERSION:-$(echo llvmorg-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack15.0}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+BUILDDIR=${TMP}/libclc-build-${VERSION}
+
+rm -rf $PKG $BUILDDIR
+mkdir -p $TMP $PKG $BUILDDIR
+cd $BUILDDIR
+
+# Add a fake configure script so the cleanup script used here at Slackware
+# knows to delete this stuff later. Other folks can just ignore this... it
+# doesn't have any other purpose.
+touch configure
+chmod 755 configure
+
+echo "Extracting $CWD/llvmorg-$VERSION.tar.?z..."
+tar xf $CWD/llvmorg-$VERSION.tar.?z llvm-project-llvmorg-$VERSION/libclc || tar xf $CWD/llvmorg-$VERSION.tar.?z llvmorg-$VERSION/libclc || exit 1
+cd llvm-project-llvmorg-$VERSION/libclc || cd llvmorg-$VERSION/libclc || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+mkdir cmake-build
+cd cmake-build
+  cmake \
+    -DCMAKE_C_FLAGS="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DLIB_SUFFIX="$LIBDIRSUFFIX" \
+    -DDOC_INSTALL_DIR="doc" \
+    -DMAN_INSTALL_DIR=/usr/man \
+    .. || exit 1
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd ..
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a *.{txt,md,TXT,rst} $PKG/usr/doc/$PKGNAM-$VERSION
+rm -f $PKG/usr/doc/$PKGNAM-$VERSION/CMakeLists.txt
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc.libclc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

testing/source/llvm/llvm.SlackBuild

@@ -0,0 +1,222 @@
+#!/bin/bash
+
+# Slackware build script for llvm
+
+# Copyright 2008-2016 Heinz Wiesinger, Amsterdam, The Netherlands
+# Copyright 2012, 2013, 2014, 2015, 2016, 2018, 2019, 2020, 2021, 2022, 2023, 2024  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=llvm
+VERSION=${VERSION:-$(echo llvmorg-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2_slack15.0}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i686 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# Select projects to build:
+if [ "$ARCH" = "i586" -o "$ARCH" = "i686" ]; then
+  # bolt and flang are not available on 32-bit
+  LLVM_ENABLE_PROJECTS=${LLVM_ENABLE_PROJECTS:-"clang;clang-tools-extra;compiler-rt;lld;lldb;llvm;mlir;openmp;polly"}
+else
+  LLVM_ENABLE_PROJECTS=${LLVM_ENABLE_PROJECTS:-"bolt;clang;clang-tools-extra;compiler-rt;flang;lld;lldb;llvm;mlir;openmp;polly"}
+fi
+
+# Select runtimes to build:
+LLVM_ENABLE_RUNTIMES=${LLVM_ENABLE_RUNTIMES:-"libcxx;libcxxabi"}
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+BUILDDIR=${TMP}/llvm-build-${VERSION}
+
+# Ignore that which should be ignored to avoid long build times and
+# massive warning spew:
+IGNORE_GNU_EXTENSIONS=${IGNORE_GNU_EXTENSIONS:--Wno-unknown-warning-option -Wno-gnu-line-marker -Wno-gnu-anonymous-struct -Wno-gnu-include-next}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686 $IGNORE_GNU_EXTENSIONS"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic $IGNORE_GNU_EXTENSIONS"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC $IGNORE_GNU_EXTENSIONS"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2 $IGNORE_GNU_EXTENSIONS"
+  LIBDIRSUFFIX=""
+fi
+
+# Python3 short version:
+PY3=$(python3 -c 'from distutils.sysconfig import get_python_lib; print(get_python_lib())' | cut -f 2 -d n | cut -f 1 -d /)
+
+rm -rf $PKG $BUILDDIR
+mkdir -p $TMP $PKG $BUILDDIR
+cd $BUILDDIR
+
+# Add a fake configure script so the cleanup script used here at Slackware
+# knows to delete this stuff later. Other folks can just ignore this... it
+# doesn't have any other purpose.
+touch configure
+chmod 755 configure
+
+echo "Extracting $CWD/llvmorg-$VERSION.tar.?z..."
+tar xf $CWD/llvmorg-$VERSION.tar.?z || exit 1
+cd llvm-project-llvmorg-$VERSION || cd llvmorg-$VERSION || exit 1
+
+# Support GCC built for i?86-slackware-linux:
+zcat $CWD/clang.toolchains.32-bit.triple.diff.gz | patch -p2 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+mkdir build
+cd build
+  cmake -GNinja \
+    -DCMAKE_C_COMPILER="clang" \
+    -DCMAKE_CXX_COMPILER="clang++" \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_SKIP_RPATH=ON \
+    -DLLVM_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DLLVM_BUILD_LLVM_DYLIB=ON \
+    -DLLVM_LINK_LLVM_DYLIB=ON \
+    -DCLANG_LINK_CLANG_DYLIB=ON \
+    -DLLVM_USE_LINKER=lld \
+    -DLLVM_ENABLE_PROJECTS="$LLVM_ENABLE_PROJECTS" \
+    -DLLVM_ENABLE_RUNTIMES="$LLVM_ENABLE_RUNTIMES" \
+    -DLLVM_ENABLE_RTTI=ON \
+    -DLLVM_ENABLE_FFI=ON \
+    -DLLVM_ENABLE_ZLIB=ON \
+    -DLLVM_ENABLE_ASSERTIONS=OFF \
+    -DLLVM_ENABLE_PER_TARGET_RUNTIME_DIR=NO \
+    -DLLVM_INSTALL_UTILS=ON \
+    -DLLVM_BINUTILS_INCDIR=/usr/include \
+    -DCLANG_RESOURCE_DIR="../lib${LIBDIRSUFFIX}/clang/$(echo $VERSION | cut -f 1 -d .)" \
+    -DLLVM_TARGETS_TO_BUILD="host;AMDGPU;BPF;WebAssembly" \
+    -DLLVM_INCLUDE_BENCHMARKS=OFF \
+    -DCOMPILER_RT_BUILD_LIBFUZZER=OFF \
+    -DCLANG_DEFAULT_PIE_ON_LINUX=ON \
+    -DLIBCXX_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \
+    -DLIBCXXABI_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \
+    -DLIBCXX_INCLUDE_BENCHMARKS=OFF \
+    -DLIBCXX_ENABLE_ABI_LINKER_SCRIPT=ON \
+    -DLIBCXXABI_USE_LLVM_UNWINDER=OFF \
+    ../llvm  || exit 1
+  "${NINJA:=ninja}" $NUMJOBS || exit 1
+  DESTDIR=$PKG "$NINJA" install || exit 1
+cd ..
+
+# Add symlinks for $ARCH-slackware-linux-{clang,clang++}:
+( cd $PKG/usr/bin
+  ln -sf clang $ARCH-slackware-linux-clang
+  ln -sf clang++ $ARCH-slackware-linux-clang++
+)
+
+# Install clang-static-analyzer:
+for i in ccc c++; do
+  ln -s /usr/libexec/$i-analyzer \
+    $PKG/usr/bin/$i-analyzer || exit 1
+done
+
+# Ensure lit-cpuid is installed:
+if [ ! -r $PKG/usr/bin/lit-cpuid ]; then
+  cp -a build/bin/lit-cpuid $PKG/usr/bin/lit-cpuid
+  chown root:root $PKG/usr/bin/lit-cpuid
+  chmod 755 $PKG/usr/bin/lit-cpuid
+fi
+
+# Remove symlink to libgomp, which is already provided by gcc:
+rm -f $PKG/usr/lib$LIBDIRSUFFIX/libgomp.so
+
+# Install Python bindings:
+for pyver in ${PY3}; do
+  mkdir -p "$PKG/usr/lib$LIBDIRSUFFIX/python$pyver/site-packages"
+  cp -a clang/bindings/python/clang "$PKG/usr/lib$LIBDIRSUFFIX/python$pyver/site-packages/"
+done
+
+# Remove bundled python-six:
+rm -f "$PKG/usr/lib$LIBDIRSUFFIX/python2*/site-packages/six.py"
+
+# Compile Python scripts:
+python3 -m compileall "$PKG/usr/lib$LIBDIRSUFFIX/python${PY3}/site-packages/clang"
+python3 -O -m compileall "$PKG/usr/lib$LIBDIRSUFFIX/python${PY3}/site-packages/clang"
+python3 -m compileall "$PKG/usr/share/scan-view"
+python3 -O -m compileall "$PKG/usr/share/scan-view"
+python3 -m compileall "$PKG/usr/share/clang"
+python3 -O -m compileall "$PKG/usr/share/clang"
+python3 -m compileall "$PKG/usr/share/opt-viewer"
+python3 -O -m compileall "$PKG/usr/share/opt-viewer"
+
+# Nevermind, we're not shipping this python2 crap:
+rm -rf $PKG/usr/lib$LIBDIRSUFFIX/python2*
+
+# Move man page directory:
+mv $PKG/usr/share/man $PKG/usr/
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Just copy anything top or next level that looks like it might be docs.
+# Maybe we'll include it someday. ;-)
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a *.{txt,md,TXT,rst} $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a --parents */*.{txt,md,TXT,rst} $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a --parents */README* $PKG/usr/doc/$PKGNAM-$VERSION
+find $PKG/usr/doc/$PKGNAM-$VERSION -name CMakeLists.txt -exec rm -f "{}" \;
+rmdir $PKG/usr/doc/$PKGNAM-$VERSION/* 2> /dev/null
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

testing/source/llvm/llvm.url

@@ -0,0 +1 @@
+https://github.com/llvm/llvm-project/archive/refs/tags/llvmorg-18.1.8.tar.gz

testing/source/llvm/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler------------------------------------------------------|
+llvm: llvm (LLVM compiler toolkit)
+llvm:
+llvm: LLVM is a toolkit for the construction of highly optimized compilers,
+llvm: optimizers, and runtime environments.
+llvm:
+llvm: This package also includes the clang frontend for the C family of
+llvm: languages: C, C++, Objective-C, and Objective-C++
+llvm:
+llvm:
+llvm: Homepage: http://llvm.org/
+llvm:

testing/source/llvm/slack-desc.libclc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+libclc: libclc (OpenCL 1.1 libraries)
+libclc:
+libclc: libclc is an open source, BSD/MIT dual licensed implementation of the
+libclc: library requirements of the OpenCL C programming language, as
+libclc: specified by the OpenCL 1.1 Specification.
+libclc:
+libclc: Homepage: http://libclc.llvm.org/
+libclc:
+libclc:
+libclc:
+libclc:

testing/source/rust-bindgen/fetch-sources.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+
+#VERSION=$1
+VERSION=0.69.4
+
+rm -rf rust-bindgen-*.tar.?z cargo-rust-bindgen*
+
+echo "Downloading rust-bindgen-$VERSION..."
+
+wget --content-disposition "https://github.com/rust-lang/rust-bindgen/archive/refs/tags/v$VERSION.tar.gz"
+
+tar xf rust-bindgen-$VERSION.tar.gz
+
+tar cf rust-bindgen-$VERSION.tar rust-bindgen-$VERSION
+
+cd rust-bindgen-$VERSION
+
+  if ! [ -f /usr/bin/cargo-vendor-filterer ]; then
+    echo "WARNING: Creating unfiltered vendor libs tarball!"
+    cargo vendor
+  else
+    cargo vendor-filterer --platform="x86_64-unknown-linux-gnu" --platform="i686-unknown-linux-gnu"
+  fi
+
+  mv vendor ../cargo-rust-bindgen-$VERSION
+cd ..
+
+tar cf cargo-rust-bindgen-$VERSION.tar cargo-rust-bindgen-$VERSION
+
+plzip -9 cargo-rust-bindgen-$VERSION.tar
+plzip -9 rust-bindgen-$VERSION.tar
+
+rm -rf rust-bindgen-$VERSION
+rm -rf cargo-rust-bindgen-$VERSION
+rm -f rust-bindgen-$VERSION.tar.gz

testing/source/rust-bindgen/rust-bindgen.SlackBuild

@@ -0,0 +1,123 @@
+#!/bin/bash
+
+# Copyright 2022  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2022  Heinz Wiesinger, Amsterdam, The Netherlands
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=rust-bindgen
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack15.0}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i686 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+tar xvf $CWD/cargo-$PKGNAM-$VERSION.tar.?z || exit 1
+mv cargo-$PKGNAM-$VERSION vendor
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure cargo for offline builds
+mkdir -p .cargo
+cat << EOF >> .cargo/config.toml
+[source.crates-io]
+replace-with = "vendored-sources"
+
+[source.vendored-sources]
+directory = "vendor"
+EOF
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+RUSTONIG_DYNAMIC_LIBONIG=1 \
+cargo build \
+  --offline \
+  --release \
+  --target $ARCH-unknown-linux-gnu \
+  --verbose \
+  $NUMJOBS || exit 1
+
+mkdir -p $PKG/usr/bin
+install -m 755 target/$ARCH-unknown-linux-gnu/release/bindgen \
+  $PKG/usr/bin/
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a *.md LICENSE* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

testing/source/rust-bindgen/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+            |-----handy-ruler------------------------------------------------------|
+rust-bindgen: rust-bindgen (Generate Rust FFI bindings to C and C++ libraries)
+rust-bindgen:
+rust-bindgen: bindgen automatically generates Rust FFI bindings to C (and some C++)
+rust-bindgen: libraries.
+rust-bindgen:
+rust-bindgen: Homepage: https://github.com/rust-lang/rust-bindgen
+rust-bindgen:
+rust-bindgen:
+rust-bindgen:
+rust-bindgen:
+rust-bindgen:

testing/source/rust/0004-compiler-Use-wasm-ld-for-wasm-targets.patch

@@ -0,0 +1,24 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: "Jan Alexander Steffens (heftig)" <heftig@archlinux.org>
+Date: Sat, 6 Nov 2021 22:42:06 +0100
+Subject: [PATCH] compiler: Use wasm-ld for wasm targets
+
+We don't ship rust-lld.
+---
+ compiler/rustc_target/src/spec/base/wasm.rs | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/compiler/rustc_target/src/spec/base/wasm.rs b/compiler/rustc_target/src/spec/base/wasm.rs
+index 4b4d2aca26e4..b4918c8fdda2 100644
+--- a/compiler/rustc_target/src/spec/base/wasm.rs
++++ b/compiler/rustc_target/src/spec/base/wasm.rs
+@@ -88,8 +88,7 @@ macro_rules! args {
+         // arguments just yet
+         limit_rdylib_exports: false,
+ 
+-        // we use the LLD shipped with the Rust toolchain by default
+-        linker: Some("rust-lld".into()),
++        linker: Some("wasm-ld".into()),
+         linker_flavor: LinkerFlavor::WasmLld(Cc::No),
+ 
+         pre_link_args,

testing/source/rust/link_libffi.diff

@@ -0,0 +1,11 @@
+--- ./compiler/rustc_llvm/build.rs.orig	2020-11-16 08:01:53.000000000 -0600
++++ ./compiler/rustc_llvm/build.rs	2020-11-19 13:46:21.222785372 -0600
+@@ -234,6 +234,8 @@
+         println!("cargo:rustc-link-lib={}={}", kind, name);
+     }
+ 
++    println!("cargo:rustc-link-lib=dylib=ffi");
++
+     // LLVM ldflags
+     //
+     // If we're a cross-compile of LLVM then unfortunately we can't trust these

testing/source/rust/rust.SlackBuild

@@ -0,0 +1,319 @@
+#!/bin/bash
+
+# Copyright 2017  Andrew Clemons, Wellington, New Zealand
+# Copyright 2017, 2018, 2019, 2020, 2021, 2022, 2023  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2017  Stuart Winter
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=rust
+SRCNAM="${PKGNAM}c"
+VERSION=${VERSION:-1.81.0}
+BUILD=${BUILD:-1_slack15.0}
+
+# Set this to YES to build with the system LLVM, or NO to use the bundled LLVM.
+SYSTEM_LLVM=${SYSTEM_LLVM:-NO}
+
+# Bootstrap variables (might not be kept updated for latest Rust):
+RSTAGE0_VERSION=${RSTAGE0_VERSION:-1.80.1}
+RSTAGE0_DIR=${RSTAGE0_DIR:-2024-08-08}
+CSTAGE0_VERSION=${CSTAGE0_VERSION:-1.80.1}
+CSTAGE0_DIR=${CSTAGE0_DIR:-$RSTAGE0_DIR}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i686 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+unset MARCH
+
+# For compiling i686 under an x86_64 kernel:
+if [ "$(uname -m)" = "x86_64" -a "$(file -L /usr/bin/gcc | grep 80386 | grep 32-bit)" != "" ]; then
+  ARCH=i686
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+# If the bootstrap binaries are present, use those. Otherwise bootstrap from
+# installed compiler.
+if /bin/ls *-unknown-linux-gnu.tar.?z 1> /dev/null 2> /dev/null ; then
+  LOCAL_BOOTSTRAP=no
+else
+  LOCAL_BOOTSTRAP=yes
+fi
+
+# https://forge.rust-lang.org/platform-support.html
+# Bootstrapping ARCH:
+if [ "$ARCH" = "i586" ]; then
+  if [ "$LOCAL_BOOTSTRAP" = "yes" ] ; then
+    if rustc -Vv | grep host | grep i586 > /dev/null ; then
+      BARCH="$ARCH"
+    else
+      BARCH="i686"
+      if case "$( uname -m )" in i586) true ;; *) false ;; esac ; then
+        echo "rust must be bootstrapped from an i686 machine"
+        exit 1
+      fi
+    fi
+  else
+    # i586 must be built on a i686 machine, since the bootstrap compiler is i686
+    BARCH="i686"
+    if case "$( uname -m )" in i586) true ;; *) false ;; esac ; then
+      echo "rust must be bootstrapped from an i686 machine"
+      exit 1
+    fi
+  fi
+  TARCH="$ARCH"
+elif [ "$ARCH" = "armv7hl" ]; then
+  BARCH="armv7"
+  TARCH="$BARCH"
+else
+  BARCH="$ARCH"
+  TARCH="$ARCH"
+fi
+
+# Bootstrapping ABI:
+if [ "$ARCH" = "armv7hl" ]; then
+  BABI="gnueabihf"
+else
+  BABI="gnu"
+fi
+
+TMP=${TMP:-/tmp}
+OUTPUT=${OUTPUT:-$TMP}
+PKG=$TMP/package-$PKGNAM
+
+# Not needed, as the build will automatically use as many jobs as there are
+# threads.
+#NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  LIBDIRSUFFIX=""
+else
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION-src
+echo "Extracting $CWD/$SRCNAM-$VERSION-src.tar.?z..."
+tar xf $CWD/$SRCNAM-$VERSION-src.tar.?z || exit 1
+cd $SRCNAM-$VERSION-src || exit 1
+
+# Link with -lffi in case of using system LLVM:
+if [ "${SYSTEM_LLVM}" = "YES" ]; then
+  zcat $CWD/link_libffi.diff.gz | patch -p1 --verbose || exit 1
+fi
+
+cat $CWD/0004-compiler-Use-wasm-ld-for-wasm-targets.patch | patch -p1 --verbose || exit 1
+
+if [ "$LOCAL_BOOTSTRAP" != "yes" ] ; then
+  # rust requires bootstrapping with the previous rust version.
+  # versions are defined in src/stage0.txt.
+  mkdir -p build/cache/$RSTAGE0_DIR
+  cp $CWD/$PKGNAM-std-$RSTAGE0_VERSION-$BARCH-unknown-linux-gnu.tar.?z \
+     $CWD/$SRCNAM-$RSTAGE0_VERSION-$BARCH-unknown-linux-gnu.tar.?z \
+     build/cache/$RSTAGE0_DIR
+  mkdir -p build/cache/$CSTAGE0_DIR
+  cp $CWD/cargo-$CSTAGE0_VERSION-$BARCH-unknown-linux-gnu.tar.?z build/cache/$CSTAGE0_DIR
+fi
+
+# Build configuration:
+cat << EOF > config.toml
+[llvm]
+ccache = "/usr/bin/ccache"
+link-shared = true
+
+[build]
+build = "$BARCH-unknown-linux-$BABI"
+host = ["$TARCH-unknown-linux-$BABI"]
+target = ["$TARCH-unknown-linux-$BABI"]
+tools = ["analysis", "cargo", "clippy", "rls", "rustfmt", "src", "rust-analyzer", "rust-demangler"]
+submodules = false
+vendor = true
+extended = true
+profiler = true
+sanitizers = true
+# Do not query new versions of dependencies online.
+locked-deps = true
+
+[install]
+prefix = "/usr"
+docdir = "doc/rust-$VERSION"
+libdir = "lib$LIBDIRSUFFIX"
+mandir = "man"
+
+[rust]
+codegen-units = 0
+channel = "stable"
+rpath = false
+codegen-tests = false
+
+EOF
+
+if [ "${SYSTEM_LLVM}" = "YES" ]; then
+  cat << EOF >> config.toml
+# Add this stuff to build with the system LLVM:
+[target.i586-unknown-linux-gnu]
+llvm-config = "/usr/bin/llvm-config"
+
+[target.i686-unknown-linux-gnu]
+llvm-config = "/usr/bin/llvm-config"
+
+[target.x86_64-unknown-linux-gnu]
+llvm-config = "/usr/bin/llvm-config"
+
+[target.armv7-unknown-linux-gnueabihf]
+llvm-config = "/usr/bin/llvm-config"
+EOF
+fi
+
+if [ "$LOCAL_BOOTSTRAP" = "yes" ] ; then
+  sed -i "s|^\(extended = true\)$|\1\nrustc = \"/usr/bin/rustc\"\ncargo = \"/usr/bin/cargo\"|" config.toml
+fi
+
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
+
+export PKG_CONFIG_ALLOW_CROSS=1
+
+if [ "$BARCH" = "i586" ] ; then
+  # when bootstrapping from i586 (rust already installed), also build a i686
+  # rustlib:
+  sed -i 's/^target =.*$/target = ["i686-unknown-linux-gnu"]/' config.toml
+elif [ "$BARCH" = "i686" ] ; then
+  if [ "$TARCH" = "i586" ] ; then
+    # this will cause some messages like:
+    # warning: redundant linker flag specified for library `m`
+    # but will keep the build from falling over when doing the stage1 compiler
+    # linking for the i586 compiler. seems the correct flags don't get passed
+    # through and we end up failures like:
+    # error: linking with `clang` failed: exit code: 1
+    # /tmp/SBo/rustc-1.20.0-src/build/i686-unknown-linux-gnu/stage1-rustc/i586-unknown-linux-gnu/release/deps/librustc_llvm-4ab259c9aed547db.so: undefined reference to `xxx`
+    export RUSTFLAGS="$RUSTFLAGS -C link-args=-lrt -ldl -lcurses -lpthread -lz -lm"
+  fi
+fi
+
+# Fix path to the rust libraries in rust-analyzer:
+if [ -r src/tools/rust-analyzer/crates/rust-analyzer/src/config.rs ]; then
+  if [ ! "$LIBDIRSUFFIX" = "" ]; then
+    sed -i "s,\"lib/rustlib,\"lib${LIBDIRSUFFIX}/rustlib,g" src/tools/rust-analyzer/crates/project-model/src/sysroot.rs
+  fi
+fi
+
+# Build and install:
+python3 ./x.py build || exit 1
+DESTDIR=$PKG python3 x.py install || exit 1
+
+# In case the rls stub doesn't get installed by the 'install' target:
+if [ ! -x $PKG/usr/bin/rls ]; then
+  install -m755 build/*-linux-gnu/stage1-tools-bin/rls $PKG/usr/bin/rls
+fi
+
+# Fix path to lldb_commands:
+if [ -x $PKG/usr/bin/rust-lldb ]; then
+  if [ ! "$LIBDIRSUFFIX" = "" ]; then
+    sed -i "s,/lib/rustlib/,/lib$LIBDIRSUFFIX/rustlib/,g" $PKG/usr/bin/rust-lldb
+  fi
+fi
+
+# Eh, none of this is all that big. Might as well leave it around as a
+# reference.
+#rm -f $PKG/usr/lib$LIBDIRSUFFIX/rustlib/components
+#rm -f $PKG/usr/lib$LIBDIRSUFFIX/rustlib/install.log
+#rm -f $PKG/usr/lib$LIBDIRSUFFIX/rustlib/manifest-*
+#rm -f $PKG/usr/lib$LIBDIRSUFFIX/rustlib/rust-installer-version
+#rm -f $PKG/usr/lib$LIBDIRSUFFIX/rustlib/uninstall.sh
+# Make sure the paths are correct, though:
+sed -i "s,/tmp/package-rust/,/,g" $PKG/usr/lib$LIBDIRSUFFIX/rustlib/install.log $PKG/usr/lib$LIBDIRSUFFIX/rustlib/manifest-*
+# And a little compression doesn't hurt either:
+gzip -9 $PKG/usr/lib$LIBDIRSUFFIX/rustlib/manifest-*
+
+# Move bash completions to the system location:
+if [ -d $PKG/etc/bash_completion.d ]; then
+  mkdir -p $PKG/usr/share/bash-completion
+  mv $PKG/etc/bash_completion.d $PKG/usr/share/bash-completion/completions
+  rmdir $PKG/etc 2> /dev/null
+fi
+
+# Correct permissions on shared libraries:
+find $PKG/usr/lib$LIBDIRSUFFIX -name "*.so" -exec chmod 755 "{}" \+
+
+# Evidently there are a lot of duplicated libraries in this tree, so let's
+# try to save some space:
+( cd $PKG/usr/lib${LIBDIRSUFFIX}/rustlib/*-linux-gnu/lib && for file in *.so ; do if cmp -s $file ../../../$file ; then ln -sf ../../../$file .; fi; done )
+
+# Strip ELF objects:
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Get rid of possible .old files in these locations:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.old
+rm -f $PKG/usr/bin/*.old
+
+# Commented out (for now) since we disable rpaths in config.toml:
+## Remove any compiled-in RPATHs:
+#find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+#  | cut -f 1 -d : | while read elfobject ; do
+#  patchelf --remove-rpath $elfobject || exit 1
+#done
+
+# Compress man pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Add some documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a *.md COPYRIGHT* COPYING* LICENSE* $PKG/usr/doc/$PKGNAM-$VERSION
+# Include licenses from third party vendors:
+mkdir $PKG/usr/doc/$PKGNAM-$VERSION/vendor
+( cd vendor
+  tar cf - $(find . -maxdepth 2 | grep -e README -e LICENSE -e COPYING -e CHANGELOG -e PERFORMANCE -e UPGRADE ) | ( cd $PKG/usr/doc/$PKGNAM-$VERSION/vendor ; tar xf - )
+)
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

testing/source/rust/rust.url

@@ -0,0 +1,35 @@
+# Source code (repacked to .tar.lz):
+VERSION=1.81.0
+rm -f rustc-${VERSION}-src.tar.*
+lftpget https://static.rust-lang.org/dist/rustc-${VERSION}-src.tar.gz
+lftpget https://static.rust-lang.org/dist/rustc-${VERSION}-src.tar.gz.asc
+if gpg --verify rustc-${VERSION}-src.tar.gz.asc ; then
+  rm -f rustc-${VERSION}-src.tar.gz.asc
+  gzip -d rustc-*tar.gz
+  plzip -9 -v rustc-*tar
+else
+  echo "FATAL ERROR: Not recompressing since GPG signature failed."
+  exit 1
+fi
+
+# Please note that the bootstrap binary packages listed below might not be kept
+# updated for later versions. The Rust compiler as shipped with Slackware
+# should be able to compile the next released version of Rust.
+#
+# To find the expected date/versions for bootstrap binaries to be able to
+# update the settings below, look at src/stage0 in the Rust sources.
+exit 0
+
+BOOTSTRAP_DATE=2024-08-08
+BOOTSTRAP_VERSION=1.80.1
+BOOTSTRAP_CARGO=$BOOTSTRAP_VERSION
+
+# i686 bootstrap:
+lftpget https://static.rust-lang.org/dist/${BOOTSTRAP_DATE}/cargo-${BOOTSTRAP_CARGO}-i686-unknown-linux-gnu.tar.xz
+lftpget https://static.rust-lang.org/dist/${BOOTSTRAP_DATE}/rust-std-${BOOTSTRAP_VERSION}-i686-unknown-linux-gnu.tar.xz
+lftpget https://static.rust-lang.org/dist/${BOOTSTRAP_DATE}/rustc-${BOOTSTRAP_VERSION}-i686-unknown-linux-gnu.tar.xz
+
+# x86_64 bootstrap:
+lftpget https://static.rust-lang.org/dist/${BOOTSTRAP_DATE}/cargo-${BOOTSTRAP_CARGO}-x86_64-unknown-linux-gnu.tar.xz
+lftpget https://static.rust-lang.org/dist/${BOOTSTRAP_DATE}/rust-std-${BOOTSTRAP_VERSION}-x86_64-unknown-linux-gnu.tar.xz
+lftpget https://static.rust-lang.org/dist/${BOOTSTRAP_DATE}/rustc-${BOOTSTRAP_VERSION}-x86_64-unknown-linux-gnu.tar.xz

testing/source/rust/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler------------------------------------------------------|
+rust: rust (a safe, concurrent, practical language)
+rust:
+rust: Rust is a curly-brace, block-structured expression language.
+rust: Its design is oriented toward concerns of "programming in the large",
+rust: that is, of creating and maintaining boundaries - both abstract and
+rust: operational - that preserve large-system integrity, availability,
+rust: and concurrency.
+rust:
+rust: Homepage: https://rust-lang.org
+rust:
+rust: