slackware-current/source/ap/vim/patches/7.3.618

To: vim_dev@googlegroups.com
Subject: Patch 7.3.618
Fcc: outbox
From: Bram Moolenaar <Bram@moolenaar.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
------------

Patch 7.3.618 (after 7.3.616)
Problem:    Still doesn't compile with small features.
Solution:   Move current_search() out of #ifdef. (Dominique Pelle)
Files:	    src/normal.c, src/search.c


*** ../vim-7.3.617/src/normal.c	2012-07-27 21:05:51.000000000 +0200
--- src/normal.c	2012-07-28 13:34:13.000000000 +0200
***************
*** 7995,8000 ****
--- 7995,8001 ----
  	cap->arg = TRUE;
  	nv_visual(cap);
  	break;
+ #endif /* FEAT_VISUAL */
  
      /* "gn", "gN" visually select next/previous search match
       * "gn" selects next match
***************
*** 8006,8014 ****
  	if (!current_search(cap->count1, cap->nchar == 'n'))
  #endif
  	    beep_flush();
- 
  	break;
- #endif /* FEAT_VISUAL */
  
      /*
       * "gj" and "gk" two new funny movement keys -- up and down
--- 8007,8013 ----
*** ../vim-7.3.617/src/search.c	2012-07-25 15:06:20.000000000 +0200
--- src/search.c	2012-07-28 13:37:19.000000000 +0200
***************
*** 3397,3547 ****
      return OK;
  }
  
- #if defined(FEAT_VISUAL) || defined(PROTO)
- /*
-  * Find next search match under cursor, cursor at end.
-  * Used while an operator is pending, and in Visual mode.
-  * TODO: redo only works when used in operator pending mode
-  */
-     int
- current_search(count, forward)
-     long	count;
-     int		forward;	/* move forward or backwards */
- {
-     pos_T	start_pos;	/* position before the pattern */
-     pos_T	orig_pos;	/* position of the cursor at beginning */
-     pos_T	pos;		/* position after the pattern */
-     int		i;
-     int		dir;
-     int		result;		/* result of various function calls */
-     char_u	old_p_ws = p_ws;
-     int		visual_active = FALSE;
-     int		flags = 0;
-     pos_T	save_VIsual;
- 
- 
-     /* wrapping should not occur */
-     p_ws = FALSE;
- 
-     /* Correct cursor when 'selection' is exclusive */
-     if (VIsual_active && *p_sel == 'e' && lt(VIsual, curwin->w_cursor))
- 	dec_cursor();
- 
-     if (VIsual_active)
-     {
- 	orig_pos = curwin->w_cursor;
- 	save_VIsual = VIsual;
- 	visual_active = TRUE;
- 
- 	/* just started visual selection, only one character */
- 	if (equalpos(VIsual, curwin->w_cursor))
- 	    visual_active = FALSE;
- 
- 	pos = curwin->w_cursor;
- 	start_pos = VIsual;
- 
- 	/* make sure, searching further will extend the match */
- 	if (VIsual_active)
- 	{
- 	    if (forward)
- 		incl(&pos);
- 	    else
- 		decl(&pos);
- 	}
-     }
-     else
- 	orig_pos = pos = start_pos = curwin->w_cursor;
- 
-     /*
-      * The trick is to first search backwards and then search forward again,
-      * so that a match at the current cursor position will be correctly
-      * captured.
-      */
-     for (i = 0; i < 2; i++)
-     {
- 	if (i && count == 1)
- 	    flags = SEARCH_START;
- 
- 	if (forward)
- 	    dir = i;
- 	else
- 	    dir = !i;
- 	result = searchit(curwin, curbuf, &pos, (dir ? FORWARD : BACKWARD),
- 		spats[last_idx].pat, (long) (i ? count : 1),
- 		SEARCH_KEEP | flags | (dir ? 0 : SEARCH_END),
- 		RE_SEARCH, 0, NULL);
- 
- 	/* First search may fail, but then start searching from the
- 	 * beginning of the file (cursor might be on the search match)
- 	 * except when Visual mode is active, so that extending the visual
- 	 * selection works. */
- 	if (!result && i) /* not found, abort */
- 	{
- 	    curwin->w_cursor = orig_pos;
- 	    if (VIsual_active)
- 		VIsual = save_VIsual;
- 	    p_ws = old_p_ws;
- 	    return FAIL;
- 	}
- 	else if (!i && !result && !visual_active)
- 	{
- 	    if (forward) /* try again from start of buffer */
- 	    {
- 		clearpos(&pos);
- 	    }
- 	    else /* try again from end of buffer */
- 	    {
- 		/* searching backwards, so set pos to last line and col */
- 		pos.lnum = curwin->w_buffer->b_ml.ml_line_count;
- 		pos.col  = STRLEN(ml_get(curwin->w_buffer->b_ml.ml_line_count));
- 	    }
- 	}
- 
-     }
- 
-     start_pos = pos;
-     flags = (forward ? SEARCH_END : 0);
- 
-     /* move to match */
-     result = searchit(curwin, curbuf, &pos, (forward ? FORWARD : BACKWARD),
- 	    spats[last_idx].pat, 0L, flags | SEARCH_KEEP, RE_SEARCH, 0, NULL);
- 
-     if (!VIsual_active)
- 	VIsual = start_pos;
- 
-     p_ws = old_p_ws;
-     curwin->w_cursor = pos;
-     VIsual_active = TRUE;
-     VIsual_mode = 'v';
- 
-     if (VIsual_active)
-     {
- 	redraw_curbuf_later(INVERTED);	/* update the inversion */
- 	if (*p_sel == 'e' && ltoreq(VIsual, curwin->w_cursor))
- 	    inc_cursor();
-     }
- 
- #ifdef FEAT_FOLDING
-     if (fdo_flags & FDO_SEARCH && KeyTyped)
- 	foldOpenCursor();
- #endif
- 
-     may_start_select('c');
- #ifdef FEAT_MOUSE
-     setmouse();
- #endif
- #ifdef FEAT_CLIPBOARD
-     /* Make sure the clipboard gets updated.  Needed because start and
-      * end are still the same, and the selection needs to be owned */
-     clip_star.vmode = NUL;
- #endif
-     redraw_curbuf_later(INVERTED);
-     showmode();
- 
-     return OK;
- }
- #endif /* FEAT_VISUAL */
- 
  /*
   * Find sentence(s) under the cursor, cursor at end.
   * When Visual active, extend it by one or more sentences.
--- 3397,3402 ----
***************
*** 4670,4675 ****
--- 4525,4675 ----
  
  #endif /* FEAT_TEXTOBJ */
  
+ #if defined(FEAT_VISUAL) || defined(PROTO)
+ /*
+  * Find next search match under cursor, cursor at end.
+  * Used while an operator is pending, and in Visual mode.
+  * TODO: redo only works when used in operator pending mode
+  */
+     int
+ current_search(count, forward)
+     long	count;
+     int		forward;	/* move forward or backwards */
+ {
+     pos_T	start_pos;	/* position before the pattern */
+     pos_T	orig_pos;	/* position of the cursor at beginning */
+     pos_T	pos;		/* position after the pattern */
+     int		i;
+     int		dir;
+     int		result;		/* result of various function calls */
+     char_u	old_p_ws = p_ws;
+     int		visual_active = FALSE;
+     int		flags = 0;
+     pos_T	save_VIsual;
+ 
+ 
+     /* wrapping should not occur */
+     p_ws = FALSE;
+ 
+     /* Correct cursor when 'selection' is exclusive */
+     if (VIsual_active && *p_sel == 'e' && lt(VIsual, curwin->w_cursor))
+ 	dec_cursor();
+ 
+     if (VIsual_active)
+     {
+ 	orig_pos = curwin->w_cursor;
+ 	save_VIsual = VIsual;
+ 	visual_active = TRUE;
+ 
+ 	/* just started visual selection, only one character */
+ 	if (equalpos(VIsual, curwin->w_cursor))
+ 	    visual_active = FALSE;
+ 
+ 	pos = curwin->w_cursor;
+ 	start_pos = VIsual;
+ 
+ 	/* make sure, searching further will extend the match */
+ 	if (VIsual_active)
+ 	{
+ 	    if (forward)
+ 		incl(&pos);
+ 	    else
+ 		decl(&pos);
+ 	}
+     }
+     else
+ 	orig_pos = pos = start_pos = curwin->w_cursor;
+ 
+     /*
+      * The trick is to first search backwards and then search forward again,
+      * so that a match at the current cursor position will be correctly
+      * captured.
+      */
+     for (i = 0; i < 2; i++)
+     {
+ 	if (i && count == 1)
+ 	    flags = SEARCH_START;
+ 
+ 	if (forward)
+ 	    dir = i;
+ 	else
+ 	    dir = !i;
+ 	result = searchit(curwin, curbuf, &pos, (dir ? FORWARD : BACKWARD),
+ 		spats[last_idx].pat, (long) (i ? count : 1),
+ 		SEARCH_KEEP | flags | (dir ? 0 : SEARCH_END),
+ 		RE_SEARCH, 0, NULL);
+ 
+ 	/* First search may fail, but then start searching from the
+ 	 * beginning of the file (cursor might be on the search match)
+ 	 * except when Visual mode is active, so that extending the visual
+ 	 * selection works. */
+ 	if (!result && i) /* not found, abort */
+ 	{
+ 	    curwin->w_cursor = orig_pos;
+ 	    if (VIsual_active)
+ 		VIsual = save_VIsual;
+ 	    p_ws = old_p_ws;
+ 	    return FAIL;
+ 	}
+ 	else if (!i && !result && !visual_active)
+ 	{
+ 	    if (forward) /* try again from start of buffer */
+ 	    {
+ 		clearpos(&pos);
+ 	    }
+ 	    else /* try again from end of buffer */
+ 	    {
+ 		/* searching backwards, so set pos to last line and col */
+ 		pos.lnum = curwin->w_buffer->b_ml.ml_line_count;
+ 		pos.col  = STRLEN(ml_get(curwin->w_buffer->b_ml.ml_line_count));
+ 	    }
+ 	}
+ 
+     }
+ 
+     start_pos = pos;
+     flags = (forward ? SEARCH_END : 0);
+ 
+     /* move to match */
+     result = searchit(curwin, curbuf, &pos, (forward ? FORWARD : BACKWARD),
+ 	    spats[last_idx].pat, 0L, flags | SEARCH_KEEP, RE_SEARCH, 0, NULL);
+ 
+     if (!VIsual_active)
+ 	VIsual = start_pos;
+ 
+     p_ws = old_p_ws;
+     curwin->w_cursor = pos;
+     VIsual_active = TRUE;
+     VIsual_mode = 'v';
+ 
+     if (VIsual_active)
+     {
+ 	redraw_curbuf_later(INVERTED);	/* update the inversion */
+ 	if (*p_sel == 'e' && ltoreq(VIsual, curwin->w_cursor))
+ 	    inc_cursor();
+     }
+ 
+ #ifdef FEAT_FOLDING
+     if (fdo_flags & FDO_SEARCH && KeyTyped)
+ 	foldOpenCursor();
+ #endif
+ 
+     may_start_select('c');
+ #ifdef FEAT_MOUSE
+     setmouse();
+ #endif
+ #ifdef FEAT_CLIPBOARD
+     /* Make sure the clipboard gets updated.  Needed because start and
+      * end are still the same, and the selection needs to be owned */
+     clip_star.vmode = NUL;
+ #endif
+     redraw_curbuf_later(INVERTED);
+     showmode();
+ 
+     return OK;
+ }
+ #endif /* FEAT_VISUAL */
+ 
  #if defined(FEAT_LISP) || defined(FEAT_CINDENT) || defined(FEAT_TEXTOBJ) \
  	|| defined(PROTO)
  /*
*** ../vim-7.3.617/src/version.c	2012-07-27 21:12:03.000000000 +0200
--- src/version.c	2012-07-29 12:54:29.000000000 +0200
***************
*** 716,717 ****
--- 716,719 ----
  {   /* Add new patch number below this line */
+ /**/
+     618,
  /**/

-- 
hundred-and-one symptoms of being an internet addict:
185. You order fast food over the Internet

 /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net   \\\
///        sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
\\\  an exciting new programming language -- http://www.Zimbu.org        ///
 \\\            help me help AIDS victims -- http://ICCF-Holland.org    ///