mirror of
git://slackware.nl/current.git
synced 2024-12-27 09:59:16 +01:00
43 lines
1.6 KiB
Text
43 lines
1.6 KiB
Text
|
# /etc/ppp/options
|
||
|
|
#
|
||
|
|
|
||
|
|
# async character map -- 32-bit hex; each bit is a character
|
||
|
|
# that needs to be escaped for pppd to receive it. 0x00000001
|
||
|
|
# represents '\x01', and 0x80000000 represents '\x1f'.
|
||
|
|
asyncmap 0
|
||
|
|
|
||
|
|
# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
|
||
|
|
# on the serial port.
|
||
|
|
crtscts
|
||
|
|
|
||
|
|
# Specifies that pppd should use a UUCP-style lock on the serial device
|
||
|
|
# to ensure exclusive access to the device.
|
||
|
|
lock
|
||
|
|
|
||
|
|
# Use the modem control lines. On Ultrix, this option implies hardware
|
||
|
|
# flow control, as for the crtscts option. (This option is not fully
|
||
|
|
# implemented.)
|
||
|
|
modem
|
||
|
|
|
||
|
|
# Add an entry to this system's ARP [Address Resolution Protocol]
|
||
|
|
# table with the IP address of the peer and the Ethernet address of this
|
||
|
|
# system.
|
||
|
|
proxyarp
|
||
|
|
|
||
|
|
# If this option is given, pppd will send an LCP echo-request frame to
|
||
|
|
# the peer every n seconds. Under Linux, the echo-request is sent when
|
||
|
|
# no packets have been received from the peer for n seconds. Normally
|
||
|
|
# the peer should respond to the echo-request by sending an echo-reply.
|
||
|
|
# This option can be used with the lcp-echo-failure option to detect
|
||
|
|
# that the peer is no longer connected.
|
||
|
|
lcp-echo-interval 30
|
||
|
|
|
||
|
|
# If this option is given, pppd will presume the peer to be dead if n
|
||
|
|
# LCP echo-requests are sent without receiving a valid LCP echo-reply.
|
||
|
|
# If this happens, pppd will terminate the connection. Use of this
|
||
|
|
# option requires a non-zero value for the lcp-echo-interval parameter.
|
||
|
|
# This option can be used to enable pppd to terminate after the physical
|
||
|
|
# connection has been broken (e.g., the modem has hung up) in
|
||
|
|
# situations where no hardware modem control lines are available.
|
||
|
|
lcp-echo-failure 4
|