slackbuilds_ponce/system/apcupsd/apcupsd.SlackBuild
Robby Workman f2cba331fa system/apcupsd: Updated for version 3.14.9.
Signed-off-by: Erik Hanson <erik@slackbuilds.org>
2011-10-11 21:20:31 -05:00

151 lines
5 KiB
Bash

#!/bin/sh
# Slackware build script for apcupsd
# Copyright 2006-2011 Robby Workman Northport, AL, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Modified 3/3/2009 by Christopher Walker <kris240376@gmail.com>
# * added log rotation
PRGNAM=apcupsd
VERSION=3.14.9
BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) ARCH=i486 ;;
arm*) ARCH=arm ;;
*) ARCH=$( uname -m ) ;;
esac
fi
CWD=$(pwd)
TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}
# These can be changed in the config file after installing apcupsd,
# so it's okay to leave them alone if you don't know what the values
# should be yet.
CGIPATH=${CGIPATH:-/var/www/cgi-bin} # Path for cgi executables
DEVICE=${DEVICE:-/dev/usb/hiddev0} # Device node of UPS
UPSTYPE=${UPSTYPE:-usb} # Type of UPS
UPSCABLE=${UPSCABLE:-usb} # Cable type (RJ45<-->USB = USB)
if [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "i686" ]; then
SLKCFLAGS="-O2 -march=i686 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi
set -e
rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf $PRGNAM-$VERSION
tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
cd $PRGNAM-$VERSION
chown -R root:root .
chmod -R a-s,u+w,go+r-w .
# The "--disable-install-distdir" is important - don't remove it.
# If you enable the distribution-specific install, then apcupsd will attempt
# to patch the /etc/rc.d/rc.6 script on your system. This may be acceptable
# from a single-user standpoint, but for packagers, it's not worth a crap.
# If I'd wanted the Makefile tampering with things outside DESTDIR, I wouldn't
# have used the DESTDIR flag - why is this so difficult to comprehend?
#
# Don't use legacy defines in the netsnmp headers
# http://www.linuxquestions.org/questions/slackware-14/cannot-build-apcups-on-slack64-current-775065/
#
CFLAGS="$SLKCFLAGS -DNETSNMP_NO_LEGACY_DEFINITIONS=1" \
CXXFLAGS="$SLKCFLAGS -DNETSNMP_NO_LEGACY_DEFINITIONS=1" \
./configure \
--prefix=/usr \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--sbindir=/sbin \
--mandir=/usr/man \
--localstatedir=/var \
--sysconfdir=/etc/apcupsd \
--disable-install-distdir \
--enable-cgi \
--with-cgi-bin=$CGIPATH \
--enable-usb \
--with-libwrap \
--enable-snmp=yes \
--with-upstype=$UPSTYPE \
--with-upscable=$UPSCABLE \
--with-dev=$DEVICE \
--build=$ARCH-slackware-linux
make
make install DESTDIR=$PKG
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
| cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
find $PKG/usr/man -type f -exec gzip -9 {} \;
for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
# Install the apcupsd init script
install -D -m 0755 platforms/slackware/apcupsd \
$PKG/etc/rc.d/rc.apcupsd.new
# Create the /var/lock/subsys directory
install -d -m 0755 $PKG/var/lock/subsys
chmod 1777 $PKG/var/lock
# Configure logrotate
mkdir -p $PKG/etc/logrotate.d
cat $CWD/apcupsd.logrotate > $PKG/etc/logrotate.d/apcupsd.new
# Rename config files to *.new so custom changes aren't clobberred
for i in apccontrol apcupsd.conf apcupsd.css changeme commfailure \
commok hosts.conf multimon.conf offbattery onbattery ; do
mv $PKG/etc/apcupsd/$i $PKG/etc/apcupsd/$i.new;
done
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a \
COPYING ChangeLog DISCLAIMER Developers INSTALL ReleaseNotes \
VERIFYING examples doc/* $CWD/README.SLACKWARE $CWD/$PRGNAM.SlackBuild \
$PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc/$PRGNAM-$VERSION -type f -exec chmod 644 {} \;
find $PKG/usr/doc/$PRGNAM-$VERSION -name "Makefile*" -exec rm {} \;
find $PKG/usr/doc/$PRGNAM-$VERSION -name "*.man" -exec rm {} \;
chown -R root:root $PKG/usr/doc
mkdir -p $PKG/install
sed s/@VERSION@/$VERSION/ $CWD/slack-desc > $PKG/install/slack-desc
cat $CWD/doinst.sh > $PKG/install/doinst.sh
cd $PKG
/sbin/makepkg -l y -c n -p $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}