slackbuilds_ponce/system/watchdog/README
2010-05-13 00:42:22 +02:00

25 lines
1 KiB
Text

Linux watchdog timer daemon
This service periodically writes to /dev/watchdog - in the event
of it _not_ being able to do so, Linux may reset the system.
For this to work, a kernel driver for the aformentioned device needs
to be loaded. The module may be found in:
/lib/modules/`uname -r`/kernel/drivers/char/watchdog
It can be configured to try and fix things (such as networking)
before triggering a reboot. As 'repair.sh' may be able to do.
See the examples included in /usr/doc/watchdog-5.6/examples
This package also contains the 'wd_keepalive' program by Marcel Jansen
which "can be run during critical periods when the normal watcdog
shouldn't be run. It will read from the same configuration file;
it will do no checks but will keep writing to the device.
To enable the watchdog: make sure a kernel module gets loaded for it
(at boot) such as the 'softdog' or an actual hardware driver...
Then add the following to rc.local:
# Start the watchdog timer deamon
if [ -x /etc/rc.d/rc.watchdog ]; then
/etc/rc.d/rc.watchdog start
fi