slackbuilds_ponce/network/efax-gtk/README.SLACKWARE
2010-05-12 17:43:13 +02:00

36 lines
2 KiB
Text

/usr/doc/efax-gtk-3.0.18/README.SLACKWARE
As differences among some program's actions can probably be somehow
cryptic to a new user, I'll report an upstream's simple explanation:
"""If you want to wait for a fax, use "Standby". If the line is already
ringing, use "Answer call". If you have already answered the call by
picking up a handset connected to the modem, use "Take over call".
""" --efax-gtk's author, from efax-gtk-general mailing-list
IMPORTANT: This program is intended to be used as a 'user'. Before running
the program, please copy configuration file /etc/efax-gtkrc (global
settings) into your fax-using user(s) $HOME as ".efax-gtkrc", and modify
it according to your own device's features and your preferences. Almost all
per-user settings can be later modified from within the program, too.
If you want a LOG file (really important, as the program does not save fax
trasmission results otherwise at the moment), modify your configuration file
inserting the absolute path of the file you want as logfile (do not use
environment variables, as they are not supported).
For serial modems/faxes: you need to add your fax-using user(s) to "uucp"
group, so that serial device file (i.e. /dev/ttyS[0-9]) is accessible.
For other modem/fax devices: make sure the relevant device files are
accessible to your user(s) for reading/writing, as well.
To avoid too much crowd in users' $HOME directory, this package uses a
custom working directory ("$HOME/.efax-gtk") to contain most of files and
directories efax-gtk uses (e.g. fax sent/received, address book, other
service files). In case of package's upgrade, in order to avoid malfunction
problems or data loss, please verify if these files are in the right
location, otherwise move them accordingly.
Read /usr/doc/efax-gtk-3.0.18/README for other operating instructions. See
your modem/fax manual for potentially needed AT modem strings and commands.
For fax trasmission's debugging purpose, you may have to insert special
parameters in configuration file for efax backend (see "man efax").