slackbuilds_ponce/development/dfu-programmer
Erik Hanson 4248415dde Add REQUIRED field to .info files.
Signed-off-by: Erik Hanson <erik@slackbuilds.org>
2012-08-19 21:57:51 -05:00
..
dfu-programmer.info Add REQUIRED field to .info files. 2012-08-19 21:57:51 -05:00
dfu-programmer.SlackBuild
README
slack-desc

dfu-programmer is a Device Firmware Update based USB programmer for
Atmel chips with a USB bootloader.

It seems to be working just fine with the LUFA based DFU Bootloader.
(http://www.fourwalledcubicle.com/LUFA.php).


You might want to add the following udev rule under /etc/udev/rules.d:

SUBSYSTEM=="usb",ACTION=="add",ATTRS{idVendor}=="03eb",ATTRS{idProduct}=="2ff4",GROUP="plugdev"

so when you plug the AVR chip to program, the USB devices becomes
available to all the members of the "plugdev" group. Also, I found
that the programmer doesn't work for non-root users when the
"usbfs" is mounted on /proc/bus/usb, so my advice is to remove the
"usbfs" entry from /etc/fstab if it is there (or maybe there is a
 better solution).