mirror of
https://github.com/Ponce/slackbuilds
synced 2024-12-05 00:55:44 +01:00
b9fe91a6a6
Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>
34 lines
1.6 KiB
Text
34 lines
1.6 KiB
Text
gpsd is a service daemon that monitors one or more GPSes attached to
|
|
a host computer through serial or USB ports, making all data on the
|
|
location, course, and velocity available to be queried on TCP port
|
|
2947 of the host computer. With gpsd, multiple GPS client applications
|
|
(such as navigational and wardriving software) can share access to GPSes
|
|
without contention or loss of data. Applications that presently use
|
|
gpsd include Viking, foxtrotgps and Kismet.
|
|
|
|
See README.build for some build options that might be useful.
|
|
|
|
To enable automatic startup of gpsd at boot time, or when a GPS device
|
|
is connected via USB, you need to do the following four steps:
|
|
|
|
1. Copy the file /lib/udev/rules.d/97-gpsd.rules to /etc/udev/rules.d/
|
|
|
|
2. Edit the file /etc/udev/rules.d/97-gpsd.rules and uncomment the line
|
|
(or lines) beginning '#ATTRS' that corresponds to your GPS hardware.
|
|
To avoid confusion with other USB serial devices that you might have,
|
|
do not uncomment lines that do not correspond to your GPS hardware.
|
|
But if you do not know which line to uncomment, and you do not have any
|
|
other serial devices, you can uncomment them all :-)
|
|
|
|
3. Make the file /etc/rc.d/rc.gpsd executable.
|
|
chmod +x /etc/rc.d/rc.gpsd
|
|
|
|
4. Add the following lines to /etc/rc.d/rc.local
|
|
if [ -x /etc/rc.d/rc.gpsd ]; then
|
|
/etc/rc.d/rc.gpsd start
|
|
fi
|
|
|
|
Configuration options may be set in the file /etc/rc.d/rc.gpsd.conf.
|
|
The defaults will usually be adequate. However, if your GPS is on a
|
|
real (non-USB) serial port -- for example, /dev/ttyS0 -- you should add
|
|
/dev/ttyS0 to GPS_DEVICES in /etc/rc.d/rc.gpsd.conf.
|