slackbuilds_ponce/audio/lsmi/man/lsmi-monterey.1
B. Watson bf4ab6962d audio/lsmi: Added (map device input to ALSA MIDI sequencer events)
Signed-off-by: Robby Workman <rworkman@slackbuilds.org>
2013-06-04 00:11:32 -05:00

172 lines
6.4 KiB
Groff

.\" Hey, EMACS: -*- nroff -*-
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH LSMI-MONTEREY 1 "May 15, 2012"
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
.\" .nh disable hyphenation
.\" .hy enable hyphenation
.\" .ad l left justify
.\" .ad b justify to both left and right margins
.\" .nf disable filling
.\" .fi enable filling
.\" .br insert line break
.\" .sp <n> insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
lsmi-monterey \- Linux Pseudo MIDI Input -- Monterey
.SH SYNOPSIS
.B lsmi-monterey
.RI [ options ] " files" ...
.SH DESCRIPTION
Monterey is a userspace driver for Monterey
International MK-9500 / K617W reversible keyboard.
This device consists of a 104 QWERTY AT computer keyboard on one side and a
37 key, velocity sensitive musical keyboard on the other. In addition to
flipping the unit over, one must flip a switch on the right side in order to
change the mode.
The keyboard interface is standard, except that the musical side sends
two-scancode packets for each piano key press and release ('make' codes
only). The first scancode indicates the note, the second the velocity: 7
being the lowest, 1 the highest, and 0 representing a release (or sometimes
a very very light keypress). The musical side also has buttons for keys F1
through F9, left and right arrow keys, and return--all generating 'make'
codes only with no way to register release.
This driver creates an ALSA Sequencer port and attempts to fill it with
realtime MIDI data representing input from the musical side of the keyboard,
while passing regular textual data through the uinput interface and on to
Linux console or X Window System. There is no need to load a special
application or even run X in order to generate MIDI events: simply flip the
keyboard over and go nuts. The driver doesn't interfere at all with
multiple/international layouts. You can even use it along
side another (merged input) keyboard (ie. plugged into a laptop) and the
driver should be able to sort everything out (provided that you refrain from
typing on both keyboards simultaneously).
.SH FUNCTION KEYS
There's no reliable way to distinguish the function keys on the musical
side from those on the QWERTY side in order to map them to channel,
program change and so on. One solution is to interpret any function key
(including arrows and return) pressed within two seconds of the 'quaver'
key (F9) as a MIDI event.
.TP
.B Program Change
The first four keys (I-IV) function as patch pages, each page able to
address 32 patches. To change to program number 2 (GM Bright Acoustic
Piano), first press QUAVER, then function key I, then press the second
piano key from the left (the first black key).
.TP
.B Bank Change
Keys V-VIII work similarly to program change, but alter current bank
instead. Note that you won't see any effect until you change patches as
well.
.TP
.B Channel Change and Octave Change
The arrow keys are used to change channel or octave. To lower or raise
the octave (from that of middle C) the octave, press QUAVER followed by
the appropriate arrow key. QUAVER may be ommitted between subsequent
arrow presses, if they occur within 2 seconds of each other. To change
the channel, press QUAVER followed by 'R' (return), then an arrow key.
All of these heuristics are timing critical and might fail to operate under
heavy system loads. To ensure proper performance, use a high realtime
priority, like 99 (and it wouldn't hurt to do the same for your keyboard
controller's IRQ).
.SH KNOWN ISSUES
.TP
.B Events
For some reason the kernel event layer drops KEY events, mostly when
switching between a piano key and its associated text key. I believe this
is a due to a bug in the repeat state tracking code, exposed here because
the keyboard generates only 'make' scancodes on the musical side. The
driver works around this by tracking the MSC_SCAN events instead, but it's
kind of a hack and requires massaging the events more than I'm comfortable
with (might not work with PS2->USB adaptors, etc.)
.TP
.B Repeat Rate
To prevent frustrating "stuck" repeats in X (the console doesn't appear to
suffer from this problem) the driver converts all REPEAT events it passes
to PRESSes.
.TP
.B LEDs
The LEDs don't work. This little driver is the only example of a real
uinput filter I've seen. I'm not sure the kernel developers anticipated
the problem of managing the LEDs. Ideally it would be transparent. As it
is, it would probably take a large amount of code to get the keyboard LEDs
working again--which seems silly.
.SH PREREQUISITES
2.6 series kernel with evdev and uinput modules loaded.
ALSA Sequencer drivers and library.
An MK-9500 or K617W keyboard...
.SH USAGE
Distribution specific init scripts are not included. The drivers may be
started from init, your .bashrc, by qjackctl, etc. In order to be run by a
non-root user the drivers must have access to the device files in /dev/input.
This may be accomplished by adding a group 'input', adding desired users to
this group, and configuring udev to assign the appropriate ownership to files
in /dev/input. It should be perfectly safe to run the drivers as root,
however.
For realtime scheduling (the \-R option), either use set_rlimits, or set the
appropriate POSIX capabilities on the executable:
.P
/sbin/setcap cap_ipc_lock,cap_sys_nice=ep /usr/bin/lsmi-joystick
.P
The lsmi.SlackBuild script already includes RT scheduling support.
.SH OPTIONS
.TP
.B \-h, \-\-help
Show summary of options.
.TP
.B \-d, \-\-device specialfile
Event device to use (instead of event0).
.TP
.B \-v, \-\-verbose
Be verbose (show note events).
.TP
.B \-p, \-\-port client:port
Connect to ALSA Sequencer client on startup.
.TP
.B \-R, \-\-realtime rtprio
Use realtime priority 'rtprio' (requires privs).
.TP
.B \-n, \-\-no-velocity
Ignore velocity information from keyboard.
.TP
.B \-c, \-\-channel n
Initial MIDI channel.
.TP
.B \-z, \-\-daemon
Fork and don't print anything to stdout.
.SH SEE ALSO
.BR lsmi-joystick (1),
.BR lsmi-keyhack (1),
.BR lsmi-mouse (1).
.br
.SH AUTHOR
lsmi was written by Jonathan Moore Liles.
.PP
This manual page was written by Ariel Errera <ariel@musix.org.ar>,
for the Debian project (but may be used by others). It was then modified
by B. Watson for the SlackBuilds.org project.