Miroirs/slackbuilds_ponce
1
0
Fork 0
mirror of https://github.com/Ponce/slackbuilds synced 2024-11-26 22:06:35 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
slackbuilds_ponce/system/grub2/grub.INFO
crocket 056131c490 system/grub2: Build a graphical terminal font. 
Signed-off-by: dsomero <xgizzmo@slackbuilds.org>
2010-08-29 15:32:15 -05:00

2557 lines
99 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This is docs/grub.info, produced by makeinfo version 4.13 from
docs/grub.texi.
This manual is for GNU GRUB (version 1.98, 2 June 2010).
Copyright (C) 1999,2000,2001,2002,2004,2006,2008,2009,2010 Free
Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software
Foundation; with no Invariant Sections.
INFO-DIR-SECTION Kernel
START-INFO-DIR-ENTRY
* GRUB: (grub). The GRand Unified Bootloader
* grub-install: (grub)Invoking grub-install. Install GRUB on your drive
* grub-mkconfig: (grub)Invoking grub-mkconfig. Generate GRUB configuration
END-INFO-DIR-ENTRY

File: grub.info, Node: Top, Next: Introduction, Up: (dir)
GNU GRUB manual
***************
This is the documentation of GNU GRUB, the GRand Unified Bootloader, a
flexible and powerful boot loader program for a wide range of
architectures.
This edition documents version 1.98.
This manual is for GNU GRUB (version 1.98, 2 June 2010).
Copyright (C) 1999,2000,2001,2002,2004,2006,2008,2009,2010 Free
Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software
Foundation; with no Invariant Sections.
* Menu:
* Introduction:: Capturing the spirit of GRUB
* Naming convention:: Names of your drives in GRUB
* Installation:: Installing GRUB on your drive
* Booting:: How to boot different operating systems
* Configuration:: Writing your own configuration file
* Network:: Downloading OS images from a network
* Serial terminal:: Using GRUB via a serial line
* Vendor power-on keys:: Changing GRUB behaviour on vendor power-on keys
* Preset Menu:: Embedding a configuration file into GRUB
* Images:: GRUB image files
* Filesystem:: Filesystem syntax and semantics
* Interface:: The menu and the command-line
* Commands:: The list of available builtin commands
* Troubleshooting:: Error messages produced by GRUB
* Invoking grub-install:: How to use the GRUB installer
* Invoking grub-mkconfig:: Generate a GRUB configuration file
* Obtaining and Building GRUB:: How to obtain and build GRUB
* Reporting bugs:: Where you should send a bug report
* Future:: Some future plans on GRUB
* Internals:: Hacking GRUB
* Copying This Manual:: Copying This Manual
* Index::

File: grub.info, Node: Introduction, Next: Naming convention, Prev: Top, Up: Top
1 Introduction to GRUB
**********************
* Menu:
* Overview:: What exactly GRUB is and how to use it
* History:: From maggot to house fly
* Features:: GRUB features
* Role of a boot loader:: The role of a boot loader

File: grub.info, Node: Overview, Next: History, Up: Introduction
1.1 Overview
============
Briefly, a "boot loader" is the first software program that runs when a
computer starts. It is responsible for loading and transferring
control to an operating system "kernel" software (such as Linux or GNU
Mach). The kernel, in turn, initializes the rest of the operating
system (e.g. a GNU system).
GNU GRUB is a very powerful boot loader, which can load a wide
variety of free operating systems, as well as proprietary operating
systems with chain-loading(1) (*note Overview-Footnote-1::). GRUB is
designed to address the complexity of booting a personal computer; both
the program and this manual are tightly bound to that computer platform,
although porting to other platforms may be addressed in the future.
One of the important features in GRUB is flexibility; GRUB
understands filesystems and kernel executable formats, so you can load
an arbitrary operating system the way you like, without recording the
physical position of your kernel on the disk. Thus you can load the
kernel just by specifying its file name and the drive and partition
where the kernel resides.
When booting with GRUB, you can use either a command-line interface
(*note Command-line interface::), or a menu interface (*note Menu
interface::). Using the command-line interface, you type the drive
specification and file name of the kernel manually. In the menu
interface, you just select an OS using the arrow keys. The menu is
based on a configuration file which you prepare beforehand (*note
Configuration::). While in the menu, you can switch to the command-line
mode, and vice-versa. You can even edit menu entries before using them.
In the following chapters, you will learn how to specify a drive, a
partition, and a file name (*note Naming convention::) to GRUB, how to
install GRUB on your drive (*note Installation::), and how to boot your
OSes (*note Booting::), step by step.

File: grub.info, Node: Overview-Footnotes, Up: Overview
(1) "chain-load" is the mechanism for loading unsupported operating
systems by loading another boot loader. It is typically used for
loading DOS or Windows.

File: grub.info, Node: History, Next: Features, Prev: Overview, Up: Introduction
1.2 History of GRUB
===================
GRUB originated in 1995 when Erich Boleyn was trying to boot the GNU
Hurd with the University of Utah's Mach 4 microkernel (now known as GNU
Mach). Erich and Brian Ford designed the Multiboot Specification
(*note Multiboot Specification: (multiboot)Top.), because they were
determined not to add to the large number of mutually-incompatible PC
boot methods.
Erich then began modifying the FreeBSD boot loader so that it would
understand Multiboot. He soon realized that it would be a lot easier to
write his own boot loader from scratch than to keep working on the
FreeBSD boot loader, and so GRUB was born.
Erich added many features to GRUB, but other priorities prevented him
from keeping up with the demands of its quickly-expanding user base. In
1999, Gordon Matzigkeit and Yoshinori K. Okuji adopted GRUB as an
official GNU package, and opened its development by making the latest
sources available via anonymous CVS. *Note Obtaining and Building
GRUB::, for more information.

File: grub.info, Node: Features, Next: Role of a boot loader, Prev: History, Up: Introduction
1.3 GRUB features
=================
The primary requirement for GRUB is that it be compliant with the
"Multiboot Specification", which is described in *note Multiboot
Specification: (multiboot)Top.
The other goals, listed in approximate order of importance, are:
* Basic functions must be straightforward for end-users.
* Rich functionality to support kernel experts and designers.
* Backward compatibility for booting FreeBSD, NetBSD, OpenBSD, and
Linux. Proprietary kernels (such as DOS, Windows NT, and OS/2) are
supported via a chain-loading function.
Except for specific compatibility modes (chain-loading and the Linux
"piggyback" format), all kernels will be started in much the same state
as in the Multiboot Specification. Only kernels loaded at 1 megabyte or
above are presently supported. Any attempt to load below that boundary
will simply result in immediate failure and an error message reporting
the problem.
In addition to the requirements above, GRUB has the following
features (note that the Multiboot Specification doesn't require all the
features that GRUB supports):
Recognize multiple executable formats
Support many of the "a.out" variants plus "ELF". Symbol tables are
also loaded.
Support non-Multiboot kernels
Support many of the various free 32-bit kernels that lack Multiboot
compliance (primarily FreeBSD, NetBSD, OpenBSD, and Linux).
Chain-loading of other boot loaders is also supported.
Load multiples modules
Fully support the Multiboot feature of loading multiple modules.
Load a configuration file
Support a human-readable text configuration file with preset boot
commands. You can also load another configuration file dynamically
and embed a preset configuration file in a GRUB image file. The
list of commands (*note Commands::) are a superset of those
supported on the command-line. An example configuration file is
provided in *note Configuration::.
Provide a menu interface
A menu interface listing preset boot commands, with a programmable
timeout, is available. There is no fixed limit on the number of
boot entries, and the current implementation has space for several
hundred.
Have a flexible command-line interface
A fairly flexible command-line interface, accessible from the menu,
is available to edit any preset commands, or write a new boot
command set from scratch. If no configuration file is present,
GRUB drops to the command-line.
The list of commands (*note Commands::) are a subset of those
supported for configuration files. Editing commands closely
resembles the Bash command-line (*note Bash: (features)Command
Line Editing.), with <TAB>-completion of commands, devices,
partitions, and files in a directory depending on context.
Support multiple filesystem types
Support multiple filesystem types transparently, plus a useful
explicit blocklist notation. The currently supported filesystem
types are "BSD FFS", "DOS FAT16 and FAT32", "Minix fs", "Linux
ext2fs", "ReiserFS", "JFS", "XFS", and "VSTa fs". *Note
Filesystem::, for more information.
Support automatic decompression
Can decompress files which were compressed by `gzip'. This
function is both automatic and transparent to the user (i.e. all
functions operate upon the uncompressed contents of the specified
files). This greatly reduces a file size and loading time, a
particularly great benefit for floppies.(1) (*note
Features-Footnote-1::)
It is conceivable that some kernel modules should be loaded in a
compressed state, so a different module-loading command can be
specified to avoid uncompressing the modules.
Access data on any installed device
Support reading data from any or all floppies or hard disk(s)
recognized by the BIOS, independent of the setting of the root
device.
Be independent of drive geometry translations
Unlike many other boot loaders, GRUB makes the particular drive
translation irrelevant. A drive installed and running with one
translation may be converted to another translation without any
adverse effects or changes in GRUB's configuration.
Detect all installed RAM
GRUB can generally find all the installed RAM on a PC-compatible
machine. It uses an advanced BIOS query technique for finding all
memory regions. As described on the Multiboot Specification (*note
Multiboot Specification: (multiboot)Top.), not all kernels make
use of this information, but GRUB provides it for those who do.
Support Logical Block Address mode
In traditional disk calls (called "CHS mode"), there is a geometry
translation problem, that is, the BIOS cannot access over 1024
cylinders, so the accessible space is limited to at least 508 MB
and to at most 8GB. GRUB can't universally solve this problem, as
there is no standard interface used in all machines. However,
several newer machines have the new interface, Logical Block
Address ("LBA") mode. GRUB automatically detects if LBA mode is
available and uses it if available. In LBA mode, GRUB can access
the entire disk.
Support network booting
GRUB is basically a disk-based boot loader but also has network
support. You can load OS images from a network by using the "TFTP"
protocol.
Support remote terminals
To support computers with no console, GRUB provides remote terminal
support, so that you can control GRUB from a remote host. Only
serial terminal support is implemented at the moment.

File: grub.info, Node: Features-Footnotes, Up: Features
(1) There are a few pathological cases where loading a very badly
organized ELF kernel might take longer, but in practice this never
happen.

File: grub.info, Node: Role of a boot loader, Prev: Features, Up: Introduction
1.4 The role of a boot loader
=============================
The following is a quotation from Gordon Matzigkeit, a GRUB fanatic:
Some people like to acknowledge both the operating system and
kernel when they talk about their computers, so they might say
they use "GNU/Linux" or "GNU/Hurd". Other people seem to think
that the kernel is the most important part of the system, so they
like to call their GNU operating systems "Linux systems."
I, personally, believe that this is a grave injustice, because the
_boot loader_ is the most important software of all. I used to
refer to the above systems as either "LILO"(1) (*note Role of a
boot loader-Footnote-1::) or "GRUB" systems.
Unfortunately, nobody ever understood what I was talking about;
now I just use the word "GNU" as a pseudonym for GRUB.
So, if you ever hear people talking about their alleged "GNU"
systems, remember that they are actually paying homage to the best
boot loader around... GRUB!
We, the GRUB maintainers, do not (usually) encourage Gordon's level
of fanaticism, but it helps to remember that boot loaders deserve
recognition. We hope that you enjoy using GNU GRUB as much as we did
writing it.

File: grub.info, Node: Role of a boot loader-Footnotes, Up: Role of a boot loader
(1) The LInux LOader, a boot loader that everybody uses, but nobody
likes.

File: grub.info, Node: Naming convention, Next: Installation, Prev: Introduction, Up: Top
2 Naming convention
*******************
The device syntax used in GRUB is a wee bit different from what you may
have seen before in your operating system(s), and you need to know it so
that you can specify a drive/partition.
Look at the following examples and explanations:
(fd0)
First of all, GRUB requires that the device name be enclosed with
`(' and `)'. The `fd' part means that it is a floppy disk. The number
`0' is the drive number, which is counted from _zero_. This expression
means that GRUB will use the whole floppy disk.
(hd0,2)
Here, `hd' means it is a hard disk drive. The first integer `0'
indicates the drive number, that is, the first hard disk, while the
second integer, `1', indicates the partition number (or the PC slice
number in the BSD terminology). The partition numbers are counted from
_one_, not from zero (as was the case in previous versions of GRUB).
This expression means the second partition of the first hard disk
drive. In this case, GRUB uses one partition of the disk, instead of
the whole disk.
(hd0,5)
This specifies the first "extended partition" of the first hard disk
drive. Note that the partition numbers for extended partitions are
counted from `5', regardless of the actual number of primary partitions
on your hard disk.
(hd1,a)
This means the BSD `a' partition of the second hard disk. If you
need to specify which PC slice number should be used, use something
like this: `(hd1,1,a)'. If the PC slice number is omitted, GRUB
searches for the first PC slice which has a BSD `a' partition.
Of course, to actually access the disks or partitions with GRUB, you
need to use the device specification in a command, like `root (fd0)' or
`unhide (hd0,3)'. To help you find out which number specifies a
partition you want, the GRUB command-line (*note Command-line
interface::) options have argument completion. This means that, for
example, you only need to type
root (
followed by a <TAB>, and GRUB will display the list of drives,
partitions, or file names. So it should be quite easy to determine the
name of your target partition, even with minimal knowledge of the
syntax.
Note that GRUB does _not_ distinguish IDE from SCSI - it simply
counts the drive numbers from zero, regardless of their type. Normally,
any IDE drive number is less than any SCSI drive number, although that
is not true if you change the boot sequence by swapping IDE and SCSI
drives in your BIOS.
Now the question is, how to specify a file? Again, consider an
example:
(hd0,1)/vmlinuz
This specifies the file named `vmlinuz', found on the first
partition of the first hard disk drive. Note that the argument
completion works with file names, too.
That was easy, admit it. Now read the next chapter, to find out how
to actually install GRUB on your drive.

File: grub.info, Node: Installation, Next: Booting, Prev: Naming convention, Up: Top
3 Installation
**************
In order to install GRUB as your boot loader, you need to first install
the GRUB system and utilities under your UNIX-like operating system
(*note Obtaining and Building GRUB::). You can do this either from the
source tarball, or as a package for your OS.
After you have done that, you need to install the boot loader on a
drive (floppy or hard disk). There are two ways of doing that - either
using the utility `grub-install' (*note Invoking grub-install::) on a
UNIX-like OS, or by running GRUB itself from a floppy. These are quite
similar, however the utility might probe a wrong BIOS drive, so you
should be careful.
Also, if you install GRUB on a UNIX-like OS, please make sure that
you have an emergency boot disk ready, so that you can rescue your
computer if, by any chance, your hard drive becomes unusable
(unbootable).
GRUB comes with boot images, which are normally put in the directory
`/usr/lib/grub/i386-pc'. Hereafter, the directory where GRUB images are
initially placed (normally `/usr/lib/grub/i386-pc') will be called the
"image directory", and the directory where the boot loader needs to
find them (usually `/boot/grub') will be called the "boot directory".
* Menu:
* Installing GRUB using grub-install::
* Making a GRUB bootable CD-ROM::

File: grub.info, Node: Installing GRUB using grub-install, Next: Making a GRUB bootable CD-ROM, Up: Installation
3.1 Installing GRUB using grub-install
======================================
*Caution:* This procedure is definitely less safe, because there are
several ways in which your computer can become unbootable. For example,
most operating systems don't tell GRUB how to map BIOS drives to OS
devices correctly--GRUB merely "guesses" the mapping. This will succeed
in most cases, but not always. Therefore, GRUB provides you with a map
file called the "device map", which you must fix if it is wrong. *Note
Device map::, for more details.
If you still do want to install GRUB under a UNIX-like OS (such as
GNU), invoke the program `grub-install' (*note Invoking grub-install::)
as the superuser ("root").
The usage is basically very simple. You only need to specify one
argument to the program, namely, where to install the boot loader. The
argument can be either a device file (like `/dev/hda') or a partition
specified in GRUB's notation. For example, under Linux the following
will install GRUB into the MBR of the first IDE disk:
# grub-install /dev/hda
Likewise, under GNU/Hurd, this has the same effect:
# grub-install /dev/hd0
If it is the first BIOS drive, this is the same as well:
# grub-install '(hd0)'
Or you can omit the parentheses:
# grub-install hd0
But all the above examples assume that GRUB should use images under
the root directory. If you want GRUB to use images under a directory
other than the root directory, you need to specify the option
`--root-directory'. The typical usage is that you create a GRUB boot
floppy with a filesystem. Here is an example:
# mke2fs /dev/fd0
# mount -t ext2 /dev/fd0 /mnt
# grub-install --root-directory=/mnt fd0
# umount /mnt
Another example is when you have a separate boot partition which is
mounted at `/boot'. Since GRUB is a boot loader, it doesn't know
anything about mountpoints at all. Thus, you need to run `grub-install'
like this:
# grub-install --root-directory=/boot /dev/hda
By the way, as noted above, it is quite difficult to guess BIOS
drives correctly under a UNIX-like OS. Thus, `grub-install' will prompt
you to check if it could really guess the correct mappings, after the
installation. The format is defined in *note Device map::. Please be
quite careful. If the output is wrong, it is unlikely that your
computer will be able to boot with no problem.
Note that `grub-install' is actually just a shell script and the
real task is done by `grub-mkimage' and `grub-setup'. Therefore, you
may run those commands directly to install GRUB, without using
`grub-install'. Don't do that, however, unless you are very familiar
with the internals of GRUB. Installing a boot loader on a running OS
may be extremely dangerous.

File: grub.info, Node: Making a GRUB bootable CD-ROM, Prev: Installing GRUB using grub-install, Up: Installation
3.2 Making a GRUB bootable CD-ROM
=================================
GRUB supports the "no emulation mode" in the El Torito specification(1)
(*note Making a GRUB bootable CD-ROM-Footnote-1::). This means that you
can use the whole CD-ROM from GRUB and you don't have to make a floppy
or hard disk image file, which can cause compatibility problems.
For booting from a CD-ROM, GRUB uses a special Stage 2 called
`stage2_eltorito'. The only GRUB files you need to have in your
bootable CD-ROM are this `stage2_eltorito' and optionally a config file
`grub.cfg'. You don't need to use `stage1' or `stage2', because El
Torito is quite different from the standard boot process.
Here is an example of procedures to make a bootable CD-ROM image.
First, make a top directory for the bootable image, say, `iso':
$ mkdir iso
Make a directory for GRUB:
$ mkdir -p iso/boot/grub
Copy the file `stage2_eltorito':
$ cp /usr/lib/grub/i386-pc/stage2_eltorito iso/boot/grub
If desired, make the config file `grub.cfg' under `iso/boot/grub'
(*note Configuration::), and copy any files and directories for the
disc to the directory `iso/'.
Finally, make a ISO9660 image file like this:
$ mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot \
-boot-load-size 4 -boot-info-table -o grub.iso iso
This produces a file named `grub.iso', which then can be burned into
a CD (or a DVD). `mkisofs' has already set up the disc to boot from
the `boot/grub/stage2_eltorito' file, so there is no need to setup GRUB
on the disc. (Note that the `-boot-load-size 4' bit is required for
compatibility with the BIOS on many older machines.)
You can use the device `(cd)' to access a CD-ROM in your config
file. This is not required; GRUB automatically sets the root device to
`(cd)' when booted from a CD-ROM. It is only necessary to refer to
`(cd)' if you want to access other drives as well.

File: grub.info, Node: Making a GRUB bootable CD-ROM-Footnotes, Up: Making a GRUB bootable CD-ROM
(1) El Torito is a specification for bootable CD using BIOS
functions.

File: grub.info, Node: Booting, Next: Configuration, Prev: Installation, Up: Top
4 Booting
*********
GRUB can load Multiboot-compliant kernels in a consistent way, but for
some free operating systems you need to use some OS-specific magic.
* Menu:
* General boot methods:: How to boot OSes with GRUB generally
* OS-specific notes:: Notes on some operating systems

File: grub.info, Node: General boot methods, Next: OS-specific notes, Up: Booting
4.1 How to boot operating systems
=================================
GRUB has two distinct boot methods. One of the two is to load an
operating system directly, and the other is to chain-load another boot
loader which then will load an operating system actually. Generally
speaking, the former is more desirable, because you don't need to
install or maintain other boot loaders and GRUB is flexible enough to
load an operating system from an arbitrary disk/partition. However, the
latter is sometimes required, since GRUB doesn't support all the
existing operating systems natively.
* Menu:
* Loading an operating system directly::
* Chain-loading::

File: grub.info, Node: Loading an operating system directly, Next: Chain-loading, Up: General boot methods
4.1.1 How to boot an OS directly with GRUB
------------------------------------------
Multiboot (*note Multiboot Specification: (multiboot)Top.) is the
native format supported by GRUB. For the sake of convenience, there is
also support for Linux, FreeBSD, NetBSD and OpenBSD. If you want to
boot other operating systems, you will have to chain-load them (*note
Chain-loading::).
FIXME: this section is incomplete.
1. Run the command `boot' (*note boot::).
However, DOS and Windows have some deficiencies, so you might have to
use more complicated instructions. *Note DOS/Windows::, for more
information.

File: grub.info, Node: Chain-loading, Prev: Loading an operating system directly, Up: General boot methods
4.1.2 Chain-loading an OS
-------------------------
Operating systems that do not support Multiboot and do not have specific
support in GRUB (specific support is available for Linux, FreeBSD,
NetBSD and OpenBSD) must be chain-loaded, which involves loading
another boot loader and jumping to it in real mode.
The `chainloader' command (*note chainloader::) is used to set this
up. It is normally also necessary to load some GRUB modules and set the
appropriate root device. Putting this together, we get something like
this, for a Windows system on the first partition of the first hard
disk:
menuentry "Windows" {
insmod chain
insmod ntfs
set root=(hd0,1)
chainloader +1
}
On systems with multiple hard disks, an additional workaround may be
required. *Note DOS/Windows::.
Chain-loading is only supported on PC BIOS and EFI platforms.

File: grub.info, Node: OS-specific notes, Prev: General boot methods, Up: Booting
4.2 Some caveats on OS-specific issues
======================================
Here, we describe some caveats on several operating systems.
* Menu:
* GNU/Hurd::
* GNU/Linux::
* DOS/Windows::
* SCO UnixWare::
* QNX::

File: grub.info, Node: GNU/Hurd, Next: GNU/Linux, Up: OS-specific notes
4.2.1 GNU/Hurd
--------------
Since GNU/Hurd is Multiboot-compliant, it is easy to boot it; there is
nothing special about it. But do not forget that you have to specify a
root partition to the kernel.
FIXME: this section is incomplete.
1. Run the command `boot' (*note boot::).

File: grub.info, Node: GNU/Linux, Next: DOS/Windows, Prev: GNU/Hurd, Up: OS-specific notes
4.2.2 GNU/Linux
---------------
It is relatively easy to boot GNU/Linux from GRUB, because it somewhat
resembles to boot a Multiboot-compliant OS.
FIXME: this section is incomplete.
1. Set GRUB's root device to the same drive as GNU/Linux's.
2. Finally, run the command `boot' (*note boot::).
*Caution:* If you use an initrd and specify the `mem=' option to the
kernel to let it use less than actual memory size, you will also have
to specify the same memory size to GRUB. To let GRUB know the size, run
the command `uppermem' _before_ loading the kernel. *Note uppermem::,
for more information.

File: grub.info, Node: DOS/Windows, Next: SCO UnixWare, Prev: GNU/Linux, Up: OS-specific notes
4.2.3 DOS/Windows
-----------------
GRUB cannot boot DOS or Windows directly, so you must chain-load them
(*note Chain-loading::). However, their boot loaders have some critical
deficiencies, so it may not work to just chain-load them. To overcome
the problems, GRUB provides you with a helper function.
If you have installed DOS (or Windows) on a non-first hard disk, you
have to use the disk swapping technique, because that OS cannot boot
from any disks but the first one. The workaround used in GRUB is the
command `drivemap' (*note drivemap::), like this:
drivemap -s (hd0) (hd1)
This performs a "virtual" swap between your first and second hard
drive.
*Caution:* This is effective only if DOS (or Windows) uses BIOS to
access the swapped disks. If that OS uses a special driver for the
disks, this probably won't work.
Another problem arises if you installed more than one set of
DOS/Windows onto one disk, because they could be confused if there are
more than one primary partitions for DOS/Windows. Certainly you should
avoid doing this, but there is a solution if you do want to do so. Use
the partition hiding/unhiding technique.
If GRUB "hides" a DOS (or Windows) partition (*note parttool::), DOS
(or Windows) will ignore the partition. If GRUB "unhides" a DOS (or
Windows) partition, DOS (or Windows) will detect the partition. Thus,
if you have installed DOS (or Windows) on the first and the second
partition of the first hard disk, and you want to boot the copy on the
first partition, do the following:
parttool (hd0,1) hidden-
parttool (hd0,2) hidden+
set root=(hd0,1)
chainloader +1
parttool ${root} boot+
boot

File: grub.info, Node: SCO UnixWare, Next: QNX, Prev: DOS/Windows, Up: OS-specific notes
4.2.4 SCO UnixWare
------------------
It is known that the signature in the boot loader for SCO UnixWare is
wrong, so you will have to specify the option `--force' to
`chainloader' (*note chainloader::), like this:
set root=(hd1,1)
chainloader --force +1
parttool ${root} boot+
boot

File: grub.info, Node: QNX, Prev: SCO UnixWare, Up: OS-specific notes
4.2.5 QNX
---------
QNX seems to use a bigger boot loader, so you need to boot it up, like
this:
set root=(hd1,2)
chainloader +4
boot

File: grub.info, Node: Configuration, Next: Network, Prev: Booting, Up: Top
5 Writing your own configuration file
*************************************
GRUB is configured using `grub.cfg', usually located under
`/boot/grub'. This file is quite flexible, but most users will not
need to write the whole thing by hand.
* Menu:
* Simple configuration:: Recommended for most users
* Shell-like scripting:: For power users and developers

File: grub.info, Node: Simple configuration, Next: Shell-like scripting, Up: Configuration
5.1 Simple configuration handling
=================================
The program `grub-mkconfig' (*note Invoking grub-mkconfig::) generates
`grub.cfg' files suitable for most cases. It is suitable for use when
upgrading a distribution, and will discover available kernels and
attempt to generate menu entries for them.
The file `/etc/default/grub' controls the operation of
`grub-mkconfig'. It is sourced by a shell script, and so must be valid
POSIX shell input; normally, it will just be a sequence of `KEY=value'
lines, but if the value contains spaces or other special characters
then it must be quoted. For example:
GRUB_TERMINAL_INPUT="console serial"
Valid keys in `/etc/default/grub' are as follows:
`GRUB_DEFAULT'
The default menu entry. This may be a number, in which case it
identifies the Nth entry in the generated menu counted from zero,
or the full name of a menu entry, or the special string `saved'.
Using the full name may be useful if you want to set a menu entry
as the default even though there may be a variable number of
entries before it.
If you set this to `saved', then the default menu entry will be
that saved by `GRUB_SAVEDEFAULT', `grub-set-default', or
`grub-reboot'.
The default is `0'.
`GRUB_SAVEDEFAULT'
If this option is set to `true', then, when an entry is selected,
save it as a new default entry for use by future runs of GRUB.
This is only useful if `GRUB_DEFAULT=saved'; it is a separate
option because `GRUB_DEFAULT=saved' is useful without this option,
in conjunction with `grub-set-default' or `grub-reboot'. Unset by
default.
`GRUB_TIMEOUT'
Boot the default entry this many seconds after the menu is
displayed, unless a key is pressed. The default is `5'. Set to
`0' to boot immediately without displaying the menu, or to `-1' to
wait indefinitely.
`GRUB_HIDDEN_TIMEOUT'
Wait this many seconds for a key to be pressed before displaying
the menu. If no key is pressed during that time, boot
immediately. Unset by default.
`GRUB_HIDDEN_TIMEOUT_QUIET'
In conjunction with `GRUB_HIDDEN_TIMEOUT', set this to `true' to
suppress the verbose countdown while waiting for a key to be
pressed before displaying the menu. Unset by default.
`GRUB_DEFAULT_BUTTON'
`GRUB_TIMEOUT_BUTTON'
`GRUB_HIDDEN_TIMEOUT_BUTTON'
`GRUB_BUTTON_CMOS_ADDRESS'
Variants of the corresponding variables without the `_BUTTON'
suffix, used to support vendor-specific power buttons. *Note
Vendor power-on keys::.
`GRUB_DISTRIBUTOR'
Set by distributors of GRUB to their identifying name. This is
used to generate more informative menu entry titles.
`GRUB_TERMINAL_INPUT'
Select the terminal input device. You may select multiple devices
here, separated by spaces.
Valid terminal input names depend on the platform, but may include
`console' (PC BIOS and EFI consoles), `serial' (serial terminal),
`ofconsole' (Open Firmware console), `at_keyboard' (PC AT
keyboard, mainly useful with Coreboot), or `usb_keyboard' (USB
keyboard using the HID Boot Protocol, for cases where the firmware
does not handle this).
The default is to use the platform's native terminal input.
`GRUB_TERMINAL_OUTPUT'
Select the terminal output device. You may select multiple
devices here, separated by spaces.
Valid terminal output names depend on the platform, but may include
`console' (PC BIOS and EFI consoles), `serial' (serial terminal),
`gfxterm' (graphics-mode output), `ofconsole' (Open Firmware
console), or `vga_text' (VGA text output, mainly useful with
Coreboot).
The default is to use the platform's native terminal input.
`GRUB_TERMINAL'
If this option is set, it overrides both `GRUB_TERMINAL_INPUT' and
`GRUB_TERMINAL_OUTPUT' to the same value.
`GRUB_SERIAL_COMMAND'
A command to configure the serial port when using the serial
console. *Note serial::. Defaults to `serial'.
`GRUB_CMDLINE_LINUX'
Command-line arguments to add to menu entries for the Linux kernel.
`GRUB_CMDLINE_LINUX_DEFAULT'
Unless `GRUB_DISABLE_LINUX_RECOVERY' is set, two menu entries will
be generated for each Linux kernel: one default entry and one
entry for recovery mode. This option lists command-line arguments
to add only to the default menu entry, after those listed in
`GRUB_CMDLINE_LINUX'.
`GRUB_CMDLINE_NETBSD'
`GRUB_CMDLINE_NETBSD_DEFAULT'
As `GRUB_CMDLINE_LINUX' and `GRUB_CMDLINE_LINUX_DEFAULT', but for
NetBSD.
`GRUB_DISABLE_LINUX_UUID'
Normally, `grub-mkconfig' will generate menu entries that use
universally-unique identifiers (UUIDs) to identify the root
filesystem to the Linux kernel, using a `root=UUID=...' kernel
parameter. This is usually more reliable, but in some cases it
may not be appropriate. To disable the use of UUIDs, set this
option to `true'.
`GRUB_DISABLE_LINUX_RECOVERY'
Disable the generation of recovery mode menu entries for Linux.
`GRUB_DISABLE_NETBSD_RECOVERY'
Disable the generation of recovery mode menu entries for NetBSD.
`GRUB_GFXMODE'
Set the resolution used on the `gfxterm' graphical terminal. Note
that you can only use modes which your graphics card supports via
VESA BIOS Extensions (VBE), so for example native LCD panel
resolutions may not be available. The default is `640x480'.
`GRUB_BACKGROUND'
Set a background image for use with the `gfxterm' graphical
terminal. The value of this option must be a file readable by
GRUB at boot time, and it must end with `.png', `.tga', `.jpg', or
`.jpeg'. The image will be scaled if necessary to fit the screen.
`GRUB_THEME'
Set a theme for use with the `gfxterm' graphical terminal. *Note
Themes::.
`GRUB_GFXPAYLOAD_LINUX'
Set to `text' to force the Linux kernel to boot in normal text
mode, `keep' to preserve the graphics mode set using
`GRUB_GFXMODE', `WIDTHxHEIGHT'[`xDEPTH'] to set a particular
graphics mode, or a sequence of these separated by commas or
semicolons to try several modes in sequence.
Depending on your kernel, your distribution, your graphics card,
and the phase of the moon, note that using this option may cause
GNU/Linux to suffer from various display problems, particularly
during the early part of the boot sequence. If you have problems,
simply unset this option and GRUB will tell Linux to boot in
normal text mode.
`GRUB_DISABLE_OS_PROBER'
Normally, `grub-mkconfig' will try to use the external `os-prober'
program, if installed, to discover other operating systems
installed on the same system and generate appropriate menu entries
for them. Set this option to `true' to disable this.
`GRUB_INIT_TUNE'
Play a tune on the speaker when GRUB starts. This is particularly
useful for users unable to see the screen. The value of this
option is passed directly to *note play::.
For more detailed customisation of `grub-mkconfig''s output, you may
edit the scripts in `/etc/grub.d' directly. `/etc/grub.d/40_custom' is
particularly useful for adding entire custom menu entries; simply type
the menu entries you want to add at the end of that file, making sure
to leave at least the first two lines intact.

File: grub.info, Node: Shell-like scripting, Prev: Simple configuration, Up: Configuration
5.2 Writing full configuration files directly
=============================================

File: grub.info, Node: Serial terminal, Next: Vendor power-on keys, Prev: Network, Up: Top
6 Using GRUB via a serial line
******************************
This chapter describes how to use the serial terminal support in GRUB.
If you have many computers or computers with no display/keyboard, it
could be very useful to control the computers through serial
communications. To connect one computer with another via a serial line,
you need to prepare a null-modem (cross) serial cable, and you may need
to have multiport serial boards, if your computer doesn't have extra
serial ports. In addition, a terminal emulator is also required, such as
minicom. Refer to a manual of your operating system, for more
information.
As for GRUB, the instruction to set up a serial terminal is quite
simple. First of all, make sure that you haven't specified the option
`--disable-serial' to the configure script when you built your GRUB
images. If you get them in binary form, probably they have serial
terminal support already.
Then, initialize your serial terminal after GRUB starts up. Here is
an example:
grub> serial --unit=0 --speed=9600
grub> terminal serial
The command `serial' initializes the serial unit 0 with the speed
9600bps. The serial unit 0 is usually called `COM1', so, if you want to
use COM2, you must specify `--unit=1' instead. This command accepts
many other options, so please refer to *note serial::, for more details.
The command `terminal' (*note terminal::) chooses which type of
terminal you want to use. In the case above, the terminal will be a
serial terminal, but you can also pass `console' to the command, as
`terminal serial console'. In this case, a terminal in which you press
any key will be selected as a GRUB terminal.
However, note that GRUB assumes that your terminal emulator is
compatible with VT100 by default. This is true for most terminal
emulators nowadays, but you should pass the option `--dumb' to the
command if your terminal emulator is not VT100-compatible or implements
few VT100 escape sequences. If you specify this option then GRUB
provides you with an alternative menu interface, because the normal
menu requires several fancy features of your terminal.

File: grub.info, Node: Vendor power-on keys, Next: Preset Menu, Prev: Serial terminal, Up: Top
7 Using GRUB with vendor power-on keys
**************************************
Some laptop vendor provide an additional power-on button which boots
another OS. GRUB supports such buttons with GRUB_TIMEOUT_BUTTON,
GRUB_DEFAULT_BUTTON, GRUB_HIDDEN_TIMEOUT_BUTTON and
GRUB_BUTTON_CMOS_ADDRESS variables in default/grub.
GRUB_TIMEOUT_BUTTON, GRUB_DEFAULT_BUTTON and GRUB_HIDDEN_TIMEOUT_BUTTON
are used instead of corresponding variables without _BUTTON suffix when
powered using special button. GRUB_BUTTON_CMOS_ADDRESS is vendor
specific and partially model-specific. Values known to GRUB team are:
<Dell XPS M1530>
85:3
To take full advantage of this function install GRUB into MBR.

File: grub.info, Node: Filesystem, Next: Interface, Prev: Images, Up: Top
8 Filesystem syntax and semantics
*********************************
GRUB uses a special syntax for specifying disk drives which can be
accessed by BIOS. Because of BIOS limitations, GRUB cannot distinguish
between IDE, ESDI, SCSI, or others. You must know yourself which BIOS
device is equivalent to which OS device. Normally, that will be clear if
you see the files in a device or use the command `find' (*note find::).
* Menu:
* Device syntax:: How to specify devices
* File name syntax:: How to specify files
* Block list syntax:: How to specify block lists

File: grub.info, Node: Device syntax, Next: File name syntax, Up: Filesystem
8.1 How to specify devices
==========================
The device syntax is like this:
`(DEVICE[,PART-NUM][,BSD-SUBPART-LETTER])'
`[]' means the parameter is optional. DEVICE should be either `fd'
or `hd' followed by a digit, like `fd0'. But you can also set DEVICE
to a hexadecimal or a decimal number which is a BIOS drive number, so
the following are equivalent:
(hd0)
(0x80)
(128)
PART-NUM represents the partition number of DEVICE, starting from
one for primary partitions and from five for extended partitions, and
BSD-SUBPART-LETTER represents the BSD disklabel subpartition, such as
`a' or `e'.
A shortcut for specifying BSD subpartitions is
`(DEVICE,BSD-SUBPART-LETTER)', in this case, GRUB searches for the
first PC partition containing a BSD disklabel, then finds the
subpartition BSD-SUBPART-LETTER. Here is an example:
(hd0,a)
The syntax `(hd0)' represents using the entire disk (or the MBR when
installing GRUB), while the syntax `(hd0,1)' represents using the first
partition of the disk (or the boot sector of the partition when
installing GRUB).
If you enabled the network support, the special drive, `(nd)', is
also available. Before using the network drive, you must initialize the
network. *Note Network::, for more information.
If you boot GRUB from a CD-ROM, `(cd)' is available. *Note Making a
GRUB bootable CD-ROM::, for details.

File: grub.info, Node: File name syntax, Next: Block list syntax, Prev: Device syntax, Up: Filesystem
8.2 How to specify files
========================
There are two ways to specify files, by "absolute file name" and by
"block list".
An absolute file name resembles a Unix absolute file name, using `/'
for the directory separator (not `\' as in DOS). One example is
`(hd0,1)/boot/grub/grub.cfg'. This means the file `/boot/grub/grub.cfg'
in the first partition of the first hard disk. If you omit the device
name in an absolute file name, GRUB uses GRUB's "root device"
implicitly. So if you set the root device to, say, `(hd1,1)' by the
command `root' (*note root::), then `/boot/kernel' is the same as
`(hd1,1)/boot/kernel'.

File: grub.info, Node: Block list syntax, Prev: File name syntax, Up: Filesystem
8.3 How to specify block lists
==============================
A block list is used for specifying a file that doesn't appear in the
filesystem, like a chainloader. The syntax is
`[OFFSET]+LENGTH[,[OFFSET]+LENGTH]...'. Here is an example:
`0+100,200+1,300+300'
This represents that GRUB should read blocks 0 through 99, block 200,
and blocks 300 through 599. If you omit an offset, then GRUB assumes
the offset is zero.
Like the file name syntax (*note File name syntax::), if a blocklist
does not contain a device name, then GRUB uses GRUB's "root device". So
`(hd0,2)+1' is the same as `+1' when the root device is `(hd0,2)'.

File: grub.info, Node: Interface, Next: Commands, Prev: Filesystem, Up: Top
9 GRUB's user interface
***********************
GRUB has both a simple menu interface for choosing preset entries from a
configuration file, and a highly flexible command-line for performing
any desired combination of boot commands.
GRUB looks for its configuration file as soon as it is loaded. If one
is found, then the full menu interface is activated using whatever
entries were found in the file. If you choose the "command-line" menu
option, or if the configuration file was not found, then GRUB drops to
the command-line interface.
* Menu:
* Command-line interface:: The flexible command-line interface
* Menu interface:: The simple menu interface
* Menu entry editor:: Editing a menu entry

File: grub.info, Node: Command-line interface, Next: Menu interface, Up: Interface
9.1 The flexible command-line interface
=======================================
The command-line interface provides a prompt and after it an editable
text area much like a command-line in Unix or DOS. Each command is
immediately executed after it is entered(1) (*note Command-line
interface-Footnote-1::). The commands (*note Command-line and menu
entry commands::) are a subset of those available in the configuration
file, used with exactly the same syntax.
Cursor movement and editing of the text on the line can be done via a
subset of the functions available in the Bash shell:
<C-f>
<PC right key>
Move forward one character.
<C-b>
<PC left key>
Move back one character.
<C-a>
<HOME>
Move to the start of the line.
<C-e>
<END>
Move the the end of the line.
<C-d>
<DEL>
Delete the character underneath the cursor.
<C-h>
<BS>
Delete the character to the left of the cursor.
<C-k>
Kill the text from the current cursor position to the end of the
line.
<C-u>
Kill backward from the cursor to the beginning of the line.
<C-y>
Yank the killed text back into the buffer at the cursor.
<C-p>
<PC up key>
Move up through the history list.
<C-n>
<PC down key>
Move down through the history list.
When typing commands interactively, if the cursor is within or before
the first word in the command-line, pressing the <TAB> key (or <C-i>)
will display a listing of the available commands, and if the cursor is
after the first word, the `<TAB>' will provide a completion listing of
disks, partitions, and file names depending on the context. Note that
to obtain a list of drives, one must open a parenthesis, as `root ('.
Note that you cannot use the completion functionality in the TFTP
filesystem. This is because TFTP doesn't support file name listing for
the security.

File: grub.info, Node: Command-line interface-Footnotes, Up: Command-line interface
(1) However, this behavior will be changed in the future version, in
a user-invisible way.

File: grub.info, Node: Menu interface, Next: Menu entry editor, Prev: Command-line interface, Up: Interface
9.2 The simple menu interface
=============================
The menu interface is quite easy to use. Its commands are both
reasonably intuitive and described on screen.
Basically, the menu interface provides a list of "boot entries" to
the user to choose from. Use the arrow keys to select the entry of
choice, then press <RET> to run it. An optional timeout is available
to boot the default entry (the first one if not set), which is aborted
by pressing any key.
Commands are available to enter a bare command-line by pressing <c>
(which operates exactly like the non-config-file version of GRUB, but
allows one to return to the menu if desired by pressing <ESC>) or to
edit any of the "boot entries" by pressing <e>.
If you protect the menu interface with a password (*note Security::),
all you can do is choose an entry by pressing <RET>, or press <p> to
enter the password.

File: grub.info, Node: Menu entry editor, Prev: Menu interface, Up: Interface
9.3 Editing a menu entry
========================
The menu entry editor looks much like the main menu interface, but the
lines in the menu are individual commands in the selected entry instead
of entry names.
If an <ESC> is pressed in the editor, it aborts all the changes made
to the configuration entry and returns to the main menu interface.
When a particular line is selected, the editor places the user in a
special version of the GRUB command-line to edit that line. When the
user hits <RET>, GRUB replaces the line in question in the boot entry
with the changes (unless it was aborted via <ESC>, in which case the
changes are thrown away).
If you want to add a new line to the menu entry, press <o> if adding
a line after the current line or press <O> if before the current line.
To delete a line, hit the key <d>. Although GRUB unfortunately does
not support "undo", you can do almost the same thing by just returning
to the main menu.

File: grub.info, Node: Commands, Next: Troubleshooting, Prev: Interface, Up: Top
10 The list of available commands
*********************************
In this chapter, we list all commands that are available in GRUB.
Commands belong to different groups. A few can only be used in the
global section of the configuration file (or "menu"); most of them can
be entered on the command-line and can be used either anywhere in the
menu or specifically in the menu entries.
* Menu:
* Menu-specific commands::
* General commands::
* Command-line and menu entry commands::

File: grub.info, Node: Menu-specific commands, Next: General commands, Up: Commands
10.1 The list of commands for the menu only
===========================================
The semantics used in parsing the configuration file are the following:
* The menu-specific commands have to be used before any others.
* The files _must_ be in plain-text format.
* `#' at the beginning of a line in a configuration file means it is
only a comment.
* Options are separated by spaces.
* All numbers can be either decimal or hexadecimal. A hexadecimal
number must be preceded by `0x', and is case-insensitive.
* Extra options or text at the end of the line are ignored unless
otherwise specified.
* Unrecognized commands are added to the current entry, except
before entries start, where they are ignored.
These commands can only be used in the menu:
* Menu:
* menuentry:: Start a menu entry

File: grub.info, Node: menuentry, Up: Menu-specific commands
10.1.1 menuentry
----------------
-- Command: title name ...
Start a new boot entry, and set its name to the contents of the
rest of the line, starting with the first non-space character.

File: grub.info, Node: General commands, Next: Command-line and menu entry commands, Prev: Menu-specific commands, Up: Commands
10.2 The list of general commands
=================================
Commands usable anywhere in the menu and in the command-line.
* Menu:
* serial:: Set up a serial device
* terminfo:: Define terminal type

File: grub.info, Node: serial, Next: terminfo, Up: General commands
10.2.1 serial
-------------
-- Command: serial [`--unit=unit'] [`--port=port'] [`--speed=speed']
[`--word=word'] [`--parity=parity'] [`--stop=stop']
Initialize a serial device. UNIT is a number in the range 0-3
specifying which serial port to use; default is 0, which
corresponds to the port often called COM1. PORT is the I/O port
where the UART is to be found; if specified it takes precedence
over UNIT. SPEED is the transmission speed; default is 9600. WORD
and STOP are the number of data bits and stop bits. Data bits must
be in the range 5-8 and stop bits must be 1 or 2. Default is 8 data
bits and one stop bit. PARITY is one of `no', `odd', `even' and
defaults to `no'.
The serial port is not used as a communication channel unless the
`terminal' command is used (*note terminal::).
This command is only available if GRUB is compiled with serial
support. See also *note Serial terminal::.

File: grub.info, Node: terminfo, Prev: serial, Up: General commands
10.2.2 terminfo
---------------
-- Command: terminfo [term]
Define the capabilities of your terminal by giving the name of an
entry in the terminfo database, which should correspond roughly to
a `TERM' environment variable in Unix.
At the moment, only `vt100' is supported in GRUB 2. If you need
other terminal types, please contact us to discuss the best way to
include support for these in GRUB.
If no option is specified, the current terminal type is printed.

File: grub.info, Node: Command-line and menu entry commands, Prev: General commands, Up: Commands
10.3 The list of command-line and menu entry commands
=====================================================
These commands are usable in the command-line and in menu entries. If
you forget a command, you can run the command `help' (*note help::).
* Menu:
* acpi:: Load ACPI tables
* blocklist:: Print a block list
* boot:: Start up your operating system
* cat:: Show the contents of a file
* chainloader:: Chain-load another boot loader
* cmp:: Compare two files
* configfile:: Load a configuration file
* crc:: Calculate CRC32 checksums
* date:: Display or set current date and time
* drivemap:: Map a drive to another
* echo:: Display a line of text
* export:: Export an environment variable
* gettext:: Translate a string
* gptsync:: Fill an MBR based on GPT entries
* halt:: Shut down your computer
* help:: Show help messages
* insmod:: Insert a module
* keystatus:: Check key modifier status
* ls:: List devices or files
* parttool:: Modify partition table entries
* play:: Play a tune
* reboot:: Reboot your computer
* set:: Set an environment variable
* unset:: Unset an environment variable

File: grub.info, Node: acpi, Next: blocklist, Up: Command-line and menu entry commands
10.3.1 acpi
-----------
-- Command: acpi [`-1'|`-2']
[`--exclude=table1,...'|`--load-only=table1,...']
[`--oemid=id'] [`--oemtable=table'] [`--oemtablerev=rev']
[`--oemtablecreator=creator'] [`--oemtablecreatorrev=rev']
[`--no-ebda'] filename ...
Modern BIOS systems normally implement the Advanced Configuration
and Power Interface (ACPI), and define various tables that
describe the interface between an ACPI-compliant operating system
and the firmware. In some cases, the tables provided by default
only work well with certain operating systems, and it may be
necessary to replace some of them.
Normally, this command will replace the Root System Description
Pointer (RSDP) in the Extended BIOS Data Area to point to the new
tables. If the `--no-ebda' option is used, the new tables will be
known only to GRUB, but may be used by GRUB's EFI emulation.

File: grub.info, Node: blocklist, Next: boot, Prev: acpi, Up: Command-line and menu entry commands
10.3.2 blocklist
----------------
-- Command: blocklist file
Print a block list (*note Block list syntax::) for FILE.

File: grub.info, Node: boot, Next: cat, Prev: blocklist, Up: Command-line and menu entry commands
10.3.3 boot
-----------
-- Command: boot
Boot the OS or chain-loader which has been loaded. Only necessary
if running the fully interactive command-line (it is implicit at
the end of a menu entry).

File: grub.info, Node: cat, Next: chainloader, Prev: boot, Up: Command-line and menu entry commands
10.3.4 cat
----------
-- Command: cat file
Display the contents of the file FILE. This command may be useful
to remind you of your OS's root partition:
grub> cat /etc/fstab

File: grub.info, Node: chainloader, Next: cmp, Prev: cat, Up: Command-line and menu entry commands
10.3.5 chainloader
------------------
-- Command: chainloader [`--force'] file
Load FILE as a chain-loader. Like any other file loaded by the
filesystem code, it can use the blocklist notation (*note Block
list syntax::) to grab the first sector of the current partition
with `+1'. If you specify the option `--force', then load FILE
forcibly, whether it has a correct signature or not. This is
required when you want to load a defective boot loader, such as
SCO UnixWare 7.1 (*note SCO UnixWare::).

File: grub.info, Node: cmp, Next: configfile, Prev: chainloader, Up: Command-line and menu entry commands
10.3.6 cmp
----------
-- Command: cmp file1 file2
Compare the file FILE1 with the file FILE2. If they differ in
size, print the sizes like this:
Differ in size: 0x1234 [foo], 0x4321 [bar]
If the sizes are equal but the bytes at an offset differ, then
print the bytes like this:
Differ at the offset 777: 0xbe [foo], 0xef [bar]
If they are completely identical, nothing will be printed.

File: grub.info, Node: configfile, Next: crc, Prev: cmp, Up: Command-line and menu entry commands
10.3.7 configfile
-----------------
-- Command: configfile file
Load FILE as a configuration file.

File: grub.info, Node: crc, Next: date, Prev: configfile, Up: Command-line and menu entry commands
10.3.8 crc
----------
-- Command: crc file
Display the CRC32 checksum of FILE.

File: grub.info, Node: date, Next: drivemap, Prev: crc, Up: Command-line and menu entry commands
10.3.9 date
-----------
-- Command: date [[year-]month-day] [hour:minute[:second]]
With no arguments, print the current date and time.
Otherwise, take the current date and time, change any elements
specified as arguments, and set the result as the new date and
time. For example, `date 01-01' will set the current month and
day to January 1, but leave the year, hour, minute, and second
unchanged.

File: grub.info, Node: drivemap, Next: echo, Prev: date, Up: Command-line and menu entry commands
10.3.10 drivemap
----------------
-- Command: drivemap `-l'|`-r'|[`-s'] from_drive to_drive
Without options, map the drive FROM_DRIVE to the drive TO_DRIVE.
This is necessary when you chain-load some operating systems, such
as DOS, if such an OS resides at a non-first drive. For
convenience, any partition suffix on the drive is ignored, so you
can safely use ${root} as a drive specification.
With the `-s' option, perform the reverse mapping as well, swapping
the two drives.
With the `-l' option, list the current mappings.
With the `-r' option, reset all mappings to the default values.
For example:
drivemap -s (hd0) (hd1)

File: grub.info, Node: echo, Next: export, Prev: drivemap, Up: Command-line and menu entry commands
10.3.11 echo
------------
-- Command: echo [`-n'] [`-e'] string ...
Display the requested text and, unless the `-n' option is used, a
trailing new line. If there is more than one string, they are
separated by spaces in the output. As usual in GRUB commands,
variables may be substituted using `${var}'.
The `-e' option enables interpretation of backslash escapes. The
following sequences are recognised:
`\\'
backslash
`\a'
alert (BEL)
`\c'
suppress trailing new line
`\f'
form feed
`\n'
new line
`\r'
carriage return
`\t'
horizontal tab
`\v'
vertical tab
When interpreting backslash escapes, backslash followed by any
other character will print that character.

File: grub.info, Node: export, Next: gettext, Prev: echo, Up: Command-line and menu entry commands
10.3.12 export
--------------
-- Command: export envvar
Export the environment variable ENVVAR. Exported variables are
visible to subsidiary configuration files loaded using
`configfile'.

File: grub.info, Node: gettext, Next: gptsync, Prev: export, Up: Command-line and menu entry commands
10.3.13 gettext
---------------
-- Command: gettext string
Translate STRING into the current language.
The current language code is stored in the `lang' variable in
GRUB's environment. Translation files in MO format are read from
`locale_dir', usually `/boot/grub/locale'.

File: grub.info, Node: gptsync, Next: halt, Prev: gettext, Up: Command-line and menu entry commands
10.3.14 gptsync
---------------
-- Command: gptsync device [partition[+/-[type]]] ...
Disks using the GUID Partition Table (GPT) also have a legacy
Master Boot Record (MBR) partition table for compatibility with
the BIOS and with older operating systems. The legacy MBR can
only represent a limited subset of GPT partition entries.
This command populates the legacy MBR with the specified PARTITION
entries on DEVICE. Up to three partitions may be used.
TYPE is an MBR partition type code; prefix with `0x' if you want
to enter this in hexadecimal. The separator between PARTITION and
TYPE may be `+' to make the partition active, or `-' to make it
inactive; only one partition may be active. If both the separator
and type are omitted, then the partition will be inactive.

File: grub.info, Node: halt, Next: help, Prev: gptsync, Up: Command-line and menu entry commands
10.3.15 halt
------------
-- Command: halt `--no-apm'
The command halts the computer. If the `--no-apm' option is
specified, no APM BIOS call is performed. Otherwise, the computer
is shut down using APM.

File: grub.info, Node: help, Next: insmod, Prev: halt, Up: Command-line and menu entry commands
10.3.16 help
------------
-- Command: help `--all' [pattern ...]
Display helpful information about builtin commands. If you do not
specify PATTERN, this command shows short descriptions of most of
available commands. If you specify the option `--all' to this
command, short descriptions of rarely used commands (such as *note
testload::) are displayed as well.
If you specify any PATTERNS, it displays longer information about
each of the commands which match those PATTERNS.

File: grub.info, Node: insmod, Next: keystatus, Prev: help, Up: Command-line and menu entry commands
10.3.17 insmod
--------------
-- Command: insmod module
Insert the dynamic GRUB module called MODULE.

File: grub.info, Node: keystatus, Next: ls, Prev: insmod, Up: Command-line and menu entry commands
10.3.18 keystatus
-----------------
-- Command: keystatus [`--shift'] [`--ctrl'] [`--alt']
Return true if the Shift, Control, or Alt modifier keys are held
down, as requested by options. This is useful in scripting, to
allow some user control over behaviour without having to wait for
a keypress.
Checking key modifier status is only supported on some platforms.
If invoked without any options, the `keystatus' command returns
true if and only if checking key modifier status is supported.

File: grub.info, Node: ls, Next: parttool, Prev: keystatus, Up: Command-line and menu entry commands
10.3.19 ls
----------
-- Command: ls [arg]
List devices or files.
With no arguments, print all devices known to GRUB.
If the argument is a device name enclosed in parentheses (*note
Device syntax::), then list all files at the root directory of
that device.
If the argument is a directory given as an absolute file name
(*note File name syntax::), then list the contents of that
directory.

File: grub.info, Node: parttool, Next: play, Prev: ls, Up: Command-line and menu entry commands
10.3.20 parttool
----------------
-- Command: parttool partition commands
Make various modifications to partition table entries.
Each COMMAND is either a boolean option, in which case it must be
followed with `+' or `-' (with no intervening space) to enable or
disable that option, or else it takes a value in the form
`COMMAND=VALUE'.
Currently, `parttool' is only useful on DOS partition tables (also
known as Master Boot Record, or MBR). On these partition tables,
the following commands are available:
`boot' (boolean)
When enabled, this makes the selected partition be the active
(bootable) partition on its disk, clearing the active flag on
all other partitions. This command is limited to _primary_
partitions.
`type' (value)
Change the type of an existing partition. The value must be
a number in the range 0-0xFF (prefix with `0x' to enter it in
hexadecimal).
`hidden' (boolean)
When enabled, this hides the selected partition by setting
the "hidden" bit in its partition type code; when disabled,
unhides the selected partition by clearing this bit. This is
useful only when booting DOS or Wwindows and multiple primary
FAT partitions exist in one disk. See also *note
DOS/Windows::.

File: grub.info, Node: play, Next: reboot, Prev: parttool, Up: Command-line and menu entry commands
10.3.21 play
------------
-- Command: play file | tempo [pitch1 duration1] [pitch2 duration2] ...
Plays a tune
If the argument is a file name (*note File name syntax::), play
the tune recorded in it. The file format is first the tempo as an
unsigned 32bit little-endian number, then pairs of unsigned 16bit
little-endian numbers for pitch and duration pairs.
If the arguments are a series of numbers, play the inline tune.
The tempo is the base for all note durations. 60 gives a 1-second
base, 120 gives a half-second base, etc. Pitches are Hz. Set
pitch to 0 to produce a rest.

File: grub.info, Node: reboot, Next: set, Prev: play, Up: Command-line and menu entry commands
10.3.22 reboot
--------------
-- Command: reboot
Reboot the computer.

File: grub.info, Node: set, Next: unset, Prev: reboot, Up: Command-line and menu entry commands
10.3.23 set
-----------
-- Command: set [envvar=value]
Set the environment variable ENVVAR to VALUE. If invoked with no
arguments, print all environment variables with their values.

File: grub.info, Node: unset, Prev: set, Up: Command-line and menu entry commands
10.3.24 unset
-------------
-- Command: unset envvar
Unset the environment variable ENVVAR.

File: grub.info, Node: Invoking grub-install, Next: Invoking grub-mkconfig, Prev: Troubleshooting, Up: Top
11 Invoking grub-install
************************
The program `grub-install' installs GRUB on your drive using
`grub-mkimage' and (on some platforms) `grub-setup'. You must specify
the device name on which you want to install GRUB, like this:
grub-install INSTALL_DEVICE
The device name INSTALL_DEVICE is an OS device name or a GRUB device
name.
`grub-install' accepts the following options:
`--help'
Print a summary of the command-line options and exit.
`--version'
Print the version number of GRUB and exit.
`--root-directory=DIR'
Install GRUB images under the directory DIR instead of the root
directory. This option is useful when you want to install GRUB
into a separate partition or a removable disk. Here is an example
in which you have a separate "boot" partition which is mounted on
`/boot':
grub-install --root-directory=/boot hd0
`--recheck'
Recheck the device map, even if `/boot/grub/device.map' already
exists. You should use this option whenever you add/remove a disk
into/from your computer.

File: grub.info, Node: Invoking grub-mkconfig, Next: Obtaining and Building GRUB, Prev: Invoking grub-install, Up: Top
12 Invoking grub-mkconfig
*************************
The program `grub-mkconfig' generates a configuration file for GRUB
(*note Simple configuration::).
grub-mkconfig -o /boot/grub/grub.cfg
`grub-mkconfig' accepts the following options:
`--help'
Print a summary of the command-line options and exit.
`--version'
Print the version number of GRUB and exit.
`-o FILE'
`--output=FILE'
Send the generated configuration file to FILE. The default is to
send it to standard output.

File: grub.info, Node: Obtaining and Building GRUB, Next: Reporting bugs, Prev: Invoking grub-mkconfig, Up: Top
Appendix A How to obtain and build GRUB
***************************************
*Caution:* GRUB requires binutils-2.9.1.0.23 or later because the
GNU assembler has been changed so that it can produce real 16bits
machine code between 2.9.1 and 2.9.1.0.x. See
`http://sources.redhat.com/binutils/', to obtain information on
how to get the latest version.
GRUB is available from the GNU alpha archive site
`ftp://alpha.gnu.org/gnu/grub' or any of its mirrors. The file will be
named grub-version.tar.gz. The current version is 1.98, so the file you
should grab is:
`ftp://alpha.gnu.org/gnu/grub/grub-1.98.tar.gz'
To unbundle GRUB use the instruction:
zcat grub-1.98.tar.gz | tar xvf -
which will create a directory called `grub-1.98' with all the
sources. You can look at the file `INSTALL' for detailed instructions
on how to build and install GRUB, but you should be able to just do:
cd grub-1.98
./configure
make install
Also, the latest version is available from the SVN. See
`http://savannah.gnu.org/svn/?group=grub' for more information.

File: grub.info, Node: Reporting bugs, Next: Future, Prev: Obtaining and Building GRUB, Up: Top
Appendix B Reporting bugs
*************************
These are the guideline for how to report bugs. Take a look at this
list below before you submit bugs:
1. Before getting unsettled, read this manual through and through.
Also, see the GNU GRUB FAQ
(http://www.gnu.org/software/grub/grub-faq.html).
2. Always mention the information on your GRUB. The version number
and the configuration are quite important. If you build it
yourself, write the options specified to the configure script and
your operating system, including the versions of gcc and binutils.
3. If you have trouble with the installation, inform us of how you
installed GRUB. Don't omit error messages, if any. Just `GRUB hangs
up when it boots' is not enough.
The information on your hardware is also essential. These are
especially important: the geometries and the partition tables of
your hard disk drives and your BIOS.
4. If GRUB cannot boot your operating system, write down _everything_
you see on the screen. Don't paraphrase them, like `The foo OS
crashes with GRUB, even though it can boot with the bar boot
loader just fine'. Mention the commands you executed, the messages
printed by them, and information on your operating system
including the version number.
5. Explain what you wanted to do. It is very useful to know your
purpose and your wish, and how GRUB didn't satisfy you.
6. If you can investigate the problem yourself, please do. That will
give you and us much more information on the problem. Attaching a
patch is even better.
When you attach a patch, make the patch in unified diff format, and
write ChangeLog entries. But, even when you make a patch, don't
forget to explain the problem, so that we can understand what your
patch is for.
7. Write down anything that you think might be related. Please
understand that we often need to reproduce the same problem you
encounterred in our environment. So your information should be
sufficient for us to do the same thing--Don't forget that we
cannot see your computer directly. If you are not sure whether to
state a fact or leave it out, state it! Reporting too many things
is much better than omitting something important.
If you follow the guideline above, submit a report to the Bug
Tracking System (http://savannah.gnu.org/bugs/?group=grub).
Alternatively, you can submit a report via electronic mail to
<bug-grub@gnu.org>, but we strongly recommend that you use the Bug
Tracking System, because e-mail can be passed over easily.
Once we get your report, we will try to fix the bugs.

File: grub.info, Node: Future, Next: Internals, Prev: Reporting bugs, Up: Top
Appendix C Where GRUB will go
*****************************
We started the next generation of GRUB, GRUB 2. GRUB 2 includes
internationalization, dynamic module loading, real memory management,
multiple architecture support, a scripting language, and many other
nice feature. If you are interested in the development of GRUB 2, take
a look at the homepage (http://www.gnu.org/software/grub/grub.html).

File: grub.info, Node: Copying This Manual, Next: Index, Prev: Internals, Up: Top
Appendix D Copying This Manual
******************************
* Menu:
* GNU Free Documentation License:: License for copying this manual.

File: grub.info, Node: GNU Free Documentation License, Up: Copying This Manual
D.1 GNU Free Documentation License
==================================
Version 1.2, November 2002
Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other
functional and useful document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it,
with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by others.
This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
We have designed this License in order to use it for manuals for
free software, because free software needs free documentation: a
free program should come with manuals providing the same freedoms
that the software does. But this License is not limited to
software manuals; it can be used for any textual work, regardless
of subject matter or whether it is published as a printed book.
We recommend this License principally for works whose purpose is
instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium,
that contains a notice placed by the copyright holder saying it
can be distributed under the terms of this License. Such a notice
grants a world-wide, royalty-free license, unlimited in duration,
to use that work under the conditions stated herein. The
"Document", below, refers to any such manual or work. Any member
of the public is a licensee, and is addressed as "you". You
accept the license if you copy, modify or distribute the work in a
way requiring permission under copyright law.
A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section
of the Document that deals exclusively with the relationship of the
publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could
fall directly within that overall subject. (Thus, if the Document
is in part a textbook of mathematics, a Secondary Section may not
explain any mathematics.) The relationship could be a matter of
historical connection with the subject or with related matters, or
of legal, commercial, philosophical, ethical or political position
regarding them.
The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in
the notice that says that the Document is released under this
License. If a section does not fit the above definition of
Secondary then it is not allowed to be designated as Invariant.
The Document may contain zero Invariant Sections. If the Document
does not identify any Invariant Sections then there are none.
The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images
composed of pixels) generic paint programs or (for drawings) some
widely available drawing editor, and that is suitable for input to
text formatters or for automatic translation to a variety of
formats suitable for input to text formatters. A copy made in an
otherwise Transparent file format whose markup, or absence of
markup, has been arranged to thwart or discourage subsequent
modification by readers is not Transparent. An image format is
not Transparent if used for any substantial amount of text. A
copy that is not "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
SGML or XML using a publicly available DTD, and
standard-conforming simple HTML, PostScript or PDF designed for
human modification. Examples of transparent image formats include
PNG, XCF and JPG. Opaque formats include proprietary formats that
can be read and edited only by proprietary word processors, SGML or
XML for which the DTD and/or processing tools are not generally
available, and the machine-generated HTML, PostScript or PDF
produced by some word processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
works in formats which do not have any title page as such, "Title
Page" means the text near the most prominent appearance of the
work's title, preceding the beginning of the body of the text.
A section "Entitled XYZ" means a named subunit of the Document
whose title either is precisely XYZ or contains XYZ in parentheses
following text that translates XYZ in another language. (Here XYZ
stands for a specific section name mentioned below, such as
"Acknowledgements", "Dedications", "Endorsements", or "History".)
To "Preserve the Title" of such a section when you modify the
Document means that it remains a section "Entitled XYZ" according
to this definition.
The Document may include Warranty Disclaimers next to the notice
which states that this License applies to the Document. These
Warranty Disclaimers are considered to be included by reference in
this License, but only as regards disclaiming warranties: any other
implication that these Warranty Disclaimers may have is void and
has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License
applies to the Document are reproduced in all copies, and that you
add no other conditions whatsoever to those of this License. You
may not use technical measures to obstruct or control the reading
or further copying of the copies you make or distribute. However,
you may accept compensation in exchange for copies. If you
distribute a large enough number of copies you must also follow
the conditions in section 3.
You may also lend copies, under the same conditions stated above,
and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly
have printed covers) of the Document, numbering more than 100, and
the Document's license notice requires Cover Texts, you must
enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
and legibly identify you as the publisher of these copies. The
front cover must present the full title with all words of the
title equally prominent and visible. You may add other material
on the covers in addition. Copying with changes limited to the
covers, as long as they preserve the title of the Document and
satisfy these conditions, can be treated as verbatim copying in
other respects.
If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto
adjacent pages.
If you publish or distribute Opaque copies of the Document
numbering more than 100, you must either include a
machine-readable Transparent copy along with each Opaque copy, or
state in or with each Opaque copy a computer-network location from
which the general network-using public has access to download
using public-standard network protocols a complete Transparent
copy of the Document, free of added material. If you use the
latter option, you must take reasonably prudent steps, when you
begin distribution of Opaque copies in quantity, to ensure that
this Transparent copy will remain thus accessible at the stated
location until at least one year after the last time you
distribute an Opaque copy (directly or through your agents or
retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of
the Document well before redistributing any large number of
copies, to give them a chance to provide you with an updated
version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document
under the conditions of sections 2 and 3 above, provided that you
release the Modified Version under precisely this License, with
the Modified Version filling the role of the Document, thus
licensing distribution and modification of the Modified Version to
whoever possesses a copy of it. In addition, you must do these
things in the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title
distinct from that of the Document, and from those of
previous versions (which should, if there were any, be listed
in the History section of the Document). You may use the
same title as a previous version if the original publisher of
that version gives permission.
B. List on the Title Page, as authors, one or more persons or
entities responsible for authorship of the modifications in
the Modified Version, together with at least five of the
principal authors of the Document (all of its principal
authors, if it has fewer than five), unless they release you
from this requirement.
C. State on the Title page the name of the publisher of the
Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications
adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license
notice giving the public permission to use the Modified
Version under the terms of this License, in the form shown in
the Addendum below.
G. Preserve in that license notice the full lists of Invariant
Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title,
and add to it an item stating at least the title, year, new
authors, and publisher of the Modified Version as given on
the Title Page. If there is no section Entitled "History" in
the Document, create one stating the title, year, authors,
and publisher of the Document as given on its Title Page,
then add an item describing the Modified Version as stated in
the previous sentence.
J. Preserve the network location, if any, given in the Document
for public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in
the "History" section. You may omit a network location for a
work that was published at least four years before the
Document itself, or if the original publisher of the version
it refers to gives permission.
K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the
section all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document,
unaltered in their text and in their titles. Section numbers
or the equivalent are not considered part of the section
titles.
M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled
"Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option
designate some or all of these sections as invariant. To do this,
add their titles to the list of Invariant Sections in the Modified
Version's license notice. These titles must be distinct from any
other section titles.
You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties--for example, statements of peer review or that the text
has been approved by an organization as the authoritative
definition of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end
of the list of Cover Texts in the Modified Version. Only one
passage of Front-Cover Text and one of Back-Cover Text may be
added by (or through arrangements made by) any one entity. If the
Document already includes a cover text for the same cover,
previously added by you or by arrangement made by the same entity
you are acting on behalf of, you may not add another; but you may
replace the old one, on explicit permission from the previous
publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this
License give permission to use their names for publicity for or to
assert or imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under
this License, under the terms defined in section 4 above for
modified versions, provided that you include in the combination
all of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your
combined work in its license notice, and that you preserve all
their Warranty Disclaimers.
The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy. If there are multiple Invariant Sections with the same name
but different contents, make the title of each such section unique
by adding at the end of it, in parentheses, the name of the
original author or publisher of that section if known, or else a
unique number. Make the same adjustment to the section titles in
the list of Invariant Sections in the license notice of the
combined work.
In the combination, you must combine any sections Entitled
"History" in the various original documents, forming one section
Entitled "History"; likewise combine any sections Entitled
"Acknowledgements", and any sections Entitled "Dedications". You
must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other
documents released under this License, and replace the individual
copies of this License in the various documents with a single copy
that is included in the collection, provided that you follow the
rules of this License for verbatim copying of each of the
documents in all other respects.
You may extract a single document from such a collection, and
distribute it individually under this License, provided you insert
a copy of this License into the extracted document, and follow
this License in all other respects regarding verbatim copying of
that document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of
a storage or distribution medium, is called an "aggregate" if the
copyright resulting from the compilation is not used to limit the
legal rights of the compilation's users beyond what the individual
works permit. When the Document is included in an aggregate, this
License does not apply to the other works in the aggregate which
are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half
of the entire aggregate, the Document's Cover Texts may be placed
on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic
form. Otherwise they must appear on printed covers that bracket
the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may
distribute translations of the Document under the terms of section
4. Replacing Invariant Sections with translations requires special
permission from their copyright holders, but you may include
translations of some or all Invariant Sections in addition to the
original versions of these Invariant Sections. You may include a
translation of this License, and all the license notices in the
Document, and any Warranty Disclaimers, provided that you also
include the original English version of this License and the
original versions of those notices and disclaimers. In case of a
disagreement between the translation and the original version of
this License or a notice or disclaimer, the original version will
prevail.
If a section in the Document is Entitled "Acknowledgements",
"Dedications", or "History", the requirement (section 4) to
Preserve its Title (section 1) will typically require changing the
actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document
except as expressly provided for under this License. Any other
attempt to copy, modify, sublicense or distribute the Document is
void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of
the GNU Free Documentation License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns. See
`http://www.gnu.org/copyleft/'.
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If
the Document does not specify a version number of this License,
you may choose any version ever published (not as a draft) by the
Free Software Foundation.
D.1.1 ADDENDUM: How to use this License for your documents
----------------------------------------------------------
To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:
Copyright (C) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is included in the section entitled ``GNU
Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with
the Front-Cover Texts being LIST, and with the Back-Cover Texts
being LIST.
If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.
If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.

File: grub.info, Node: Index, Prev: Copying This Manual, Up: Top
Index
*****
[index]
* Menu:
* acpi: acpi. (line 11)
* blocklist: blocklist. (line 7)
* boot: boot. (line 7)
* cat: cat. (line 7)
* chainloader: chainloader. (line 7)
* cmp: cmp. (line 7)
* configfile: configfile. (line 7)
* crc: crc. (line 7)
* date: date. (line 7)
* drivemap: drivemap. (line 7)
* echo: echo. (line 7)
* export: export. (line 7)
* FDL, GNU Free Documentation License: GNU Free Documentation License.
(line 6)
* gettext: gettext. (line 7)
* gptsync: gptsync. (line 7)
* halt: halt. (line 7)
* help: help. (line 7)
* insmod: insmod. (line 7)
* keystatus: keystatus. (line 7)
* ls: ls. (line 7)
* parttool: parttool. (line 7)
* play: play. (line 7)
* reboot: reboot. (line 7)
* serial: serial. (line 8)
* set: set. (line 7)
* terminfo: terminfo. (line 7)
* title: menuentry. (line 7)
* unset: unset. (line 7)

Tag Table:
Node: Top759
Node: Introduction2800
Node: Overview3177
Node: Overview-Footnotes5161
Ref: Overview-Footnote-15222
Node: History5383
Node: Features6504
Node: Features-Footnotes12272
Ref: Features-Footnote-112333
Node: Role of a boot loader12478
Node: Role of a boot loader-Footnotes13816
Ref: Role of a boot loader-Footnote-113903
Node: Naming convention13982
Node: Installation16935
Node: Installing GRUB using grub-install18335
Node: Making a GRUB bootable CD-ROM21233
Node: Making a GRUB bootable CD-ROM-Footnotes23278
Ref: Making a GRUB bootable CD-ROM-Footnote-123381
Node: Booting23456
Node: General boot methods23848
Node: Loading an operating system directly24589
Node: Chain-loading25320
Node: OS-specific notes26291
Node: GNU/Hurd26598
Node: GNU/Linux26964
Node: DOS/Windows27674
Node: SCO UnixWare29465
Node: QNX29867
Node: Configuration30095
Node: Simple configuration30554
Node: Shell-like scripting38108
Node: Serial terminal38298
Node: Vendor power-on keys40540
Node: Filesystem41337
Node: Device syntax42018
Node: File name syntax43509
Node: Block list syntax44250
Node: Interface44981
Node: Command-line interface45798
Node: Command-line interface-Footnotes47737
Ref: Command-line interface-Footnote-147826
Node: Menu interface47921
Node: Menu entry editor48929
Node: Commands49976
Node: Menu-specific commands50553
Node: menuentry51511
Node: General commands51778
Node: serial52163
Node: terminfo53216
Node: Command-line and menu entry commands53794
Node: acpi55517
Node: blocklist56559
Node: boot56791
Node: cat57112
Node: chainloader57416
Node: cmp58061
Node: configfile58612
Node: crc58824
Node: date59017
Node: drivemap59554
Node: echo60357
Node: export61294
Node: gettext61606
Node: gptsync62013
Node: halt62958
Node: help63284
Node: insmod63902
Node: keystatus64120
Node: ls64755
Node: parttool65299
Node: play66791
Node: reboot67532
Node: set67712
Node: unset68010
Node: Invoking grub-install68198
Node: Invoking grub-mkconfig69402
Node: Obtaining and Building GRUB70037
Node: Reporting bugs71266
Node: Future74070
Node: Copying This Manual74559
Node: GNU Free Documentation License74790
Node: Index97198

End Tag Table
Reference in a new issue View git blame Copy permalink