slackbuilds_ponce/games/qtsixa
..
doinst.sh
qtsixa-dbus.patch
qtsixa.info
qtsixa.SlackBuild
README
sixad-init.patch
sixad-shared-h.patch
sixad.patch
slack-desc

QtSixA is the Sixaxis Joystick Manager. It can connect PS3 hardware
(Sixaxis/DualShock3 and Keypads) to a Linux-compatible machine.
Currently it supports Sixaxis buttons, axis, accelerometers and LEDs.

Some patches thankfully taken from https://aur.archlinux.org/packages/qtsixa/.

Notes:

Be sure you are using a Bluetooth dongle with a HCI version higher than 1.1
by using `hciconfig default version | grep HCI`.

Please note that due to the behaviour of "sixpair" and a replaced "hidd",
the stock Bluetooth stack is getting disabled while running and no other
Bluetooth devices will work, until the "replaced" hidd is disabled again
from `sh /etc/rc.d/rc.sixad stop`.

In case something like `kdesu` is not installed, you need to run `qtsixa`
with root rights.

Steps:

- connect your device through USB
- start "qtsixa" and pair your device (Tasks->Pair Device to PC)
- start "sixad" by `sh /etc/rc.d/rc.sixad start`
- press the PS button on your controller

Pairing is just needed once. If wanted, you can add rc.sixad to your
rc.local and pressing the PS button again after a reboot without any
further interaction.