mirror of
https://github.com/Ponce/slackbuilds
synced 2024-11-25 10:03:03 +01:00
143991a46e
This field used to make sense in our pre-git days, but the Signed-Off-By: line serves the same purpose (and even more) now, so APPROVED has been rejected. ;-) Signed-off-by: Robby Workman <rworkman@slackbuilds.org> |
||
|---|---|---|
| .. | ||
| dfu-programmer.info | ||
| dfu-programmer.SlackBuild | ||
| README | ||
| slack-desc | ||
dfu-programmer is a Device Firmware Update based USB programmer for
Atmel chips with a USB bootloader.
It seems to be working just fine with the LUFA based DFU Bootloader.
(http://www.fourwalledcubicle.com/LUFA.php).
You might want to add the following udev rule under /etc/udev/rules.d:
SUBSYSTEM=="usb",ACTION=="add",ATTRS{idVendor}=="03eb",ATTRS{idProduct}=="2ff4",GROUP="plugdev"
so when you plug the AVR chip to program, the USB devices becomes
available to all the members of the "plugdev" group. Also, I found
that the programmer doesn't work for non-root users when the
"usbfs" is mounted on /proc/bus/usb, so my advice is to remove the
"usbfs" entry from /etc/fstab if it is there (or maybe there is a
better solution).