mirror of
https://github.com/Ponce/slackbuilds
synced 2024-12-04 00:56:07 +01:00
d981329dfb
Signed-off-by: dsomero <xgizzmo@slackbuilds.org>
7806 lines
276 KiB
SquidConf
7806 lines
276 KiB
SquidConf
# WELCOME TO SQUID 3.4.10
|
|
# ----------------------------
|
|
#
|
|
# This is the documentation for the Squid configuration file.
|
|
# This documentation can also be found online at:
|
|
# http://www.squid-cache.org/Doc/config/
|
|
#
|
|
# You may wish to look at the Squid home page and wiki for the
|
|
# FAQ and other documentation:
|
|
# http://www.squid-cache.org/
|
|
# http://wiki.squid-cache.org/SquidFaq
|
|
# http://wiki.squid-cache.org/ConfigExamples
|
|
#
|
|
# This documentation shows what the defaults for various directives
|
|
# happen to be. If you don't need to change the default, you should
|
|
# leave the line out of your squid.conf in most cases.
|
|
#
|
|
# In some cases "none" refers to no default setting at all,
|
|
# while in other cases it refers to the value of the option
|
|
# - the comments for that keyword indicate if this is the case.
|
|
#
|
|
|
|
# Configuration options can be included using the "include" directive.
|
|
# Include takes a list of files to include. Quoting and wildcards are
|
|
# supported.
|
|
#
|
|
# For example,
|
|
#
|
|
# include /path/to/included/file/squid.acl.config
|
|
#
|
|
# Includes can be nested up to a hard-coded depth of 16 levels.
|
|
# This arbitrary restriction is to prevent recursive include references
|
|
# from causing Squid entering an infinite loop whilst trying to load
|
|
# configuration files.
|
|
#
|
|
# Values with byte units
|
|
#
|
|
# Squid accepts size units on some size related directives. All
|
|
# such directives are documented with a default value displaying
|
|
# a unit.
|
|
#
|
|
# Units accepted by Squid are:
|
|
# bytes - byte
|
|
# KB - Kilobyte (1024 bytes)
|
|
# MB - Megabyte
|
|
# GB - Gigabyte
|
|
#
|
|
# Values with spaces, quotes, and other special characters
|
|
#
|
|
# Squid supports directive parameters with spaces, quotes, and other
|
|
# special characters. Surround such parameters with "double quotes". Use
|
|
# the configuration_includes_quoted_values directive to enable or
|
|
# disable that support.
|
|
#
|
|
# For example;
|
|
#
|
|
# configuration_includes_quoted_values on
|
|
# acl group external groupCheck Administrators "Internet Users" Guest
|
|
# configuration_includes_quoted_values off
|
|
#
|
|
#
|
|
# Conditional configuration
|
|
#
|
|
# If-statements can be used to make configuration directives
|
|
# depend on conditions:
|
|
#
|
|
# if <CONDITION>
|
|
# ... regular configuration directives ...
|
|
# [else
|
|
# ... regular configuration directives ...]
|
|
# endif
|
|
#
|
|
# The else part is optional. The keywords "if", "else", and "endif"
|
|
# must be typed on their own lines, as if they were regular
|
|
# configuration directives.
|
|
#
|
|
# NOTE: An else-if condition is not supported.
|
|
#
|
|
# These individual conditions types are supported:
|
|
#
|
|
# true
|
|
# Always evaluates to true.
|
|
# false
|
|
# Always evaluates to false.
|
|
# <integer> = <integer>
|
|
# Equality comparison of two integer numbers.
|
|
#
|
|
#
|
|
# SMP-Related Macros
|
|
#
|
|
# The following SMP-related preprocessor macros can be used.
|
|
#
|
|
# ${process_name} expands to the current Squid process "name"
|
|
# (e.g., squid1, squid2, or cache1).
|
|
#
|
|
# ${process_number} expands to the current Squid process
|
|
# identifier, which is an integer number (e.g., 1, 2, 3) unique
|
|
# across all Squid processes.
|
|
|
|
# TAG: broken_vary_encoding
|
|
# This option is not yet supported by Squid-3.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: cache_vary
|
|
# This option is not yet supported by Squid-3.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: collapsed_forwarding
|
|
# This option is not yet supported by Squid-3. see http://bugs.squid-cache.org/show_bug.cgi?id=3495
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: error_map
|
|
# This option is not yet supported by Squid-3.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: external_refresh_check
|
|
# This option is not yet supported by Squid-3.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: location_rewrite_program
|
|
# This option is not yet supported by Squid-3.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: refresh_stale_hit
|
|
# This option is not yet supported by Squid-3.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: ignore_ims_on_miss
|
|
# Remove this line. The HTTP/1.1 feature is now configured by 'cache_miss_revalidate'.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: ignore_expect_100
|
|
# Remove this line. The HTTP/1.1 feature is now fully supported by default.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: dns_v4_fallback
|
|
# Remove this line. Squid performs a 'Happy Eyeballs' algorithm, the 'fallback' algorithm is no longer relevant.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: ftp_list_width
|
|
# Remove this line. Configure FTP page display using the CSS controls in errorpages.css instead.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: maximum_single_addr_tries
|
|
# Replaced by connect_retries. The behaviour has changed, please read the documentation before altering.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: update_headers
|
|
# Remove this line. The feature is supported by default in storage types where update is implemented.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: url_rewrite_concurrency
|
|
# Remove this line. Set the 'concurrency=' option of url_rewrite_children instead.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: dns_testnames
|
|
# Remove this line. DNS is no longer tested on startup.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: extension_methods
|
|
# Remove this line. All valid methods for HTTP are accepted by default.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: zero_buffers
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: incoming_rate
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: server_http11
|
|
# Remove this line. HTTP/1.1 is supported by default.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: upgrade_http0.9
|
|
# Remove this line. ICY/1.0 streaming protocol is supported by default.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: zph_local
|
|
# Alter these entries. Use the qos_flows directive instead.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: header_access
|
|
# Since squid-3.0 replace with request_header_access or reply_header_access
|
|
# depending on whether you wish to match client requests or server replies.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: httpd_accel_no_pmtu_disc
|
|
# Since squid-3.0 use the 'disable-pmtu-discovery' flag on http_port instead.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: wais_relay_host
|
|
# Replace this line with 'cache_peer' configuration.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: wais_relay_port
|
|
# Replace this line with 'cache_peer' configuration.
|
|
#Default:
|
|
# none
|
|
|
|
# OPTIONS FOR AUTHENTICATION
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: auth_param
|
|
# This is used to define parameters for the various authentication
|
|
# schemes supported by Squid.
|
|
#
|
|
# format: auth_param scheme parameter [setting]
|
|
#
|
|
# The order in which authentication schemes are presented to the client is
|
|
# dependent on the order the scheme first appears in config file. IE
|
|
# has a bug (it's not RFC 2617 compliant) in that it will use the basic
|
|
# scheme if basic is the first entry presented, even if more secure
|
|
# schemes are presented. For now use the order in the recommended
|
|
# settings section below. If other browsers have difficulties (don't
|
|
# recognize the schemes offered even if you are using basic) either
|
|
# put basic first, or disable the other schemes (by commenting out their
|
|
# program entry).
|
|
#
|
|
# Once an authentication scheme is fully configured, it can only be
|
|
# shutdown by shutting squid down and restarting. Changes can be made on
|
|
# the fly and activated with a reconfigure. I.E. You can change to a
|
|
# different helper, but not unconfigure the helper completely.
|
|
#
|
|
# Please note that while this directive defines how Squid processes
|
|
# authentication it does not automatically activate authentication.
|
|
# To use authentication you must in addition make use of ACLs based
|
|
# on login name in http_access (proxy_auth, proxy_auth_regex or
|
|
# external with %LOGIN used in the format tag). The browser will be
|
|
# challenged for authentication on the first such acl encountered
|
|
# in http_access processing and will also be re-challenged for new
|
|
# login credentials if the request is being denied by a proxy_auth
|
|
# type acl.
|
|
#
|
|
# WARNING: authentication can't be used in a transparently intercepting
|
|
# proxy as the client then thinks it is talking to an origin server and
|
|
# not the proxy. This is a limitation of bending the TCP/IP protocol to
|
|
# transparently intercepting port 80, not a limitation in Squid.
|
|
# Ports flagged 'transparent', 'intercept', or 'tproxy' have
|
|
# authentication disabled.
|
|
#
|
|
# === Parameters for the basic scheme follow. ===
|
|
#
|
|
# "program" cmdline
|
|
# Specify the command for the external authenticator. Such a program
|
|
# reads a line containing "username password" and replies with one of
|
|
# three results:
|
|
#
|
|
# OK
|
|
# the user exists.
|
|
#
|
|
# ERR
|
|
# the user does not exist.
|
|
#
|
|
# BH
|
|
# An internal error occurred in the helper, preventing
|
|
# a result being identified.
|
|
#
|
|
# "ERR" and "BH" results may optionally be followed by message="..."
|
|
# containing a description available as %m in the returned error page.
|
|
#
|
|
# If you use an authenticator, make sure you have 1 acl of type
|
|
# proxy_auth.
|
|
#
|
|
# By default, the basic authentication scheme is not used unless a
|
|
# program is specified.
|
|
#
|
|
# If you want to use the traditional NCSA proxy authentication, set
|
|
# this line to something like
|
|
#
|
|
# auth_param basic program /usr/libexec/basic_ncsa_auth /usr/etc/passwd
|
|
#
|
|
# "utf8" on|off
|
|
# HTTP uses iso-latin-1 as character set, while some authentication
|
|
# backends such as LDAP expects UTF-8. If this is set to on Squid will
|
|
# translate the HTTP iso-latin-1 charset to UTF-8 before sending the
|
|
# username & password to the helper.
|
|
#
|
|
# "children" numberofchildren [startup=N] [idle=N] [concurrency=N]
|
|
# The maximum number of authenticator processes to spawn. If you start too few
|
|
# Squid will have to wait for them to process a backlog of credential
|
|
# verifications, slowing it down. When password verifications are
|
|
# done via a (slow) network you are likely to need lots of
|
|
# authenticator processes.
|
|
#
|
|
# The startup= and idle= options permit some skew in the exact amount
|
|
# run. A minimum of startup=N will begin during startup and reconfigure.
|
|
# Squid will start more in groups of up to idle=N in an attempt to meet
|
|
# traffic needs and to keep idle=N free above those traffic needs up to
|
|
# the maximum.
|
|
#
|
|
# The concurrency= option sets the number of concurrent requests the
|
|
# helper can process. The default of 0 is used for helpers who only
|
|
# supports one request at a time. Setting this to a number greater than
|
|
# 0 changes the protocol used to include a channel number first on the
|
|
# request/response line, allowing multiple requests to be sent to the
|
|
# same helper in parallel without waiting for the response.
|
|
# Must not be set unless it's known the helper supports this.
|
|
#
|
|
# auth_param basic children 20 startup=0 idle=1
|
|
#
|
|
# "realm" realmstring
|
|
# Specifies the realm name which is to be reported to the
|
|
# client for the basic proxy authentication scheme (part of
|
|
# the text the user will see when prompted their username and
|
|
# password). There is no default.
|
|
# auth_param basic realm Squid proxy-caching web server
|
|
#
|
|
# "credentialsttl" timetolive
|
|
# Specifies how long squid assumes an externally validated
|
|
# username:password pair is valid for - in other words how
|
|
# often the helper program is called for that user. Set this
|
|
# low to force revalidation with short lived passwords. Note
|
|
# setting this high does not impact your susceptibility
|
|
# to replay attacks unless you are using an one-time password
|
|
# system (such as SecureID). If you are using such a system,
|
|
# you will be vulnerable to replay attacks unless you also
|
|
# use the max_user_ip ACL in an http_access rule.
|
|
#
|
|
# "casesensitive" on|off
|
|
# Specifies if usernames are case sensitive. Most user databases are
|
|
# case insensitive allowing the same username to be spelled using both
|
|
# lower and upper case letters, but some are case sensitive. This
|
|
# makes a big difference for user_max_ip ACL processing and similar.
|
|
# auth_param basic casesensitive off
|
|
#
|
|
# === Parameters for the digest scheme follow ===
|
|
#
|
|
# "program" cmdline
|
|
# Specify the command for the external authenticator. Such
|
|
# a program reads a line containing "username":"realm" and
|
|
# replies with one of three results:
|
|
#
|
|
# OK ha1="..."
|
|
# the user exists. The ha1= key is mandatory and
|
|
# contains the appropriate H(A1) value, hex encoded.
|
|
# See rfc 2616 for the definition of H(A1).
|
|
#
|
|
# ERR
|
|
# the user does not exist.
|
|
#
|
|
# BH
|
|
# An internal error occurred in the helper, preventing
|
|
# a result being identified.
|
|
#
|
|
# "ERR" and "BH" results may optionally be followed by message="..."
|
|
# containing a description available as %m in the returned error page.
|
|
#
|
|
# By default, the digest authentication scheme is not used unless a
|
|
# program is specified.
|
|
#
|
|
# If you want to use a digest authenticator, set this line to
|
|
# something like
|
|
#
|
|
# auth_param digest program /usr/bin/digest_pw_auth /usr/etc/digpass
|
|
#
|
|
# "utf8" on|off
|
|
# HTTP uses iso-latin-1 as character set, while some authentication
|
|
# backends such as LDAP expects UTF-8. If this is set to on Squid will
|
|
# translate the HTTP iso-latin-1 charset to UTF-8 before sending the
|
|
# username & password to the helper.
|
|
#
|
|
# "children" numberofchildren [startup=N] [idle=N] [concurrency=N]
|
|
# The maximum number of authenticator processes to spawn (default 5).
|
|
# If you start too few Squid will have to wait for them to
|
|
# process a backlog of H(A1) calculations, slowing it down.
|
|
# When the H(A1) calculations are done via a (slow) network
|
|
# you are likely to need lots of authenticator processes.
|
|
#
|
|
# The startup= and idle= options permit some skew in the exact amount
|
|
# run. A minimum of startup=N will begin during startup and reconfigure.
|
|
# Squid will start more in groups of up to idle=N in an attempt to meet
|
|
# traffic needs and to keep idle=N free above those traffic needs up to
|
|
# the maximum.
|
|
#
|
|
# The concurrency= option sets the number of concurrent requests the
|
|
# helper can process. The default of 0 is used for helpers who only
|
|
# supports one request at a time. Setting this to a number greater than
|
|
# 0 changes the protocol used to include a channel number first on the
|
|
# request/response line, allowing multiple requests to be sent to the
|
|
# same helper in parallel without waiting for the response.
|
|
# Must not be set unless it's known the helper supports this.
|
|
#
|
|
# auth_param digest children 20 startup=0 idle=1
|
|
#
|
|
# "realm" realmstring
|
|
# Specifies the realm name which is to be reported to the
|
|
# client for the digest proxy authentication scheme (part of
|
|
# the text the user will see when prompted their username and
|
|
# password). There is no default.
|
|
# auth_param digest realm Squid proxy-caching web server
|
|
#
|
|
# "nonce_garbage_interval" timeinterval
|
|
# Specifies the interval that nonces that have been issued
|
|
# to client_agent's are checked for validity.
|
|
#
|
|
# "nonce_max_duration" timeinterval
|
|
# Specifies the maximum length of time a given nonce will be
|
|
# valid for.
|
|
#
|
|
# "nonce_max_count" number
|
|
# Specifies the maximum number of times a given nonce can be
|
|
# used.
|
|
#
|
|
# "nonce_strictness" on|off
|
|
# Determines if squid requires strict increment-by-1 behavior
|
|
# for nonce counts, or just incrementing (off - for use when
|
|
# user agents generate nonce counts that occasionally miss 1
|
|
# (ie, 1,2,4,6)). Default off.
|
|
#
|
|
# "check_nonce_count" on|off
|
|
# This directive if set to off can disable the nonce count check
|
|
# completely to work around buggy digest qop implementations in
|
|
# certain mainstream browser versions. Default on to check the
|
|
# nonce count to protect from authentication replay attacks.
|
|
#
|
|
# "post_workaround" on|off
|
|
# This is a workaround to certain buggy browsers who sends
|
|
# an incorrect request digest in POST requests when reusing
|
|
# the same nonce as acquired earlier on a GET request.
|
|
#
|
|
# === NTLM scheme options follow ===
|
|
#
|
|
# "program" cmdline
|
|
# Specify the command for the external NTLM authenticator.
|
|
# Such a program reads exchanged NTLMSSP packets with
|
|
# the browser via Squid until authentication is completed.
|
|
# If you use an NTLM authenticator, make sure you have 1 acl
|
|
# of type proxy_auth. By default, the NTLM authenticator program
|
|
# is not used.
|
|
#
|
|
# auth_param ntlm program /usr/bin/ntlm_auth
|
|
#
|
|
# "children" numberofchildren [startup=N] [idle=N]
|
|
# The maximum number of authenticator processes to spawn (default 5).
|
|
# If you start too few Squid will have to wait for them to
|
|
# process a backlog of credential verifications, slowing it
|
|
# down. When credential verifications are done via a (slow)
|
|
# network you are likely to need lots of authenticator
|
|
# processes.
|
|
#
|
|
# The startup= and idle= options permit some skew in the exact amount
|
|
# run. A minimum of startup=N will begin during startup and reconfigure.
|
|
# Squid will start more in groups of up to idle=N in an attempt to meet
|
|
# traffic needs and to keep idle=N free above those traffic needs up to
|
|
# the maximum.
|
|
#
|
|
# auth_param ntlm children 20 startup=0 idle=1
|
|
#
|
|
# "keep_alive" on|off
|
|
# If you experience problems with PUT/POST requests when using the
|
|
# Negotiate authentication scheme then you can try setting this to
|
|
# off. This will cause Squid to forcibly close the connection on
|
|
# the initial requests where the browser asks which schemes are
|
|
# supported by the proxy.
|
|
#
|
|
# auth_param ntlm keep_alive on
|
|
#
|
|
# === Options for configuring the NEGOTIATE auth-scheme follow ===
|
|
#
|
|
# "program" cmdline
|
|
# Specify the command for the external Negotiate authenticator.
|
|
# This protocol is used in Microsoft Active-Directory enabled setups with
|
|
# the Microsoft Internet Explorer or Mozilla Firefox browsers.
|
|
# Its main purpose is to exchange credentials with the Squid proxy
|
|
# using the Kerberos mechanisms.
|
|
# If you use a Negotiate authenticator, make sure you have at least
|
|
# one acl of type proxy_auth active. By default, the negotiate
|
|
# authenticator program is not used.
|
|
# The only supported program for this role is the ntlm_auth
|
|
# program distributed as part of Samba, version 4 or later.
|
|
#
|
|
# auth_param negotiate program /usr/bin/ntlm_auth --helper-protocol=gss-spnego
|
|
#
|
|
# "children" numberofchildren [startup=N] [idle=N]
|
|
# The maximum number of authenticator processes to spawn (default 5).
|
|
# If you start too few Squid will have to wait for them to
|
|
# process a backlog of credential verifications, slowing it
|
|
# down. When credential verifications are done via a (slow)
|
|
# network you are likely to need lots of authenticator
|
|
# processes.
|
|
#
|
|
# The startup= and idle= options permit some skew in the exact amount
|
|
# run. A minimum of startup=N will begin during startup and reconfigure.
|
|
# Squid will start more in groups of up to idle=N in an attempt to meet
|
|
# traffic needs and to keep idle=N free above those traffic needs up to
|
|
# the maximum.
|
|
#
|
|
# auth_param negotiate children 20 startup=0 idle=1
|
|
#
|
|
# "keep_alive" on|off
|
|
# If you experience problems with PUT/POST requests when using the
|
|
# Negotiate authentication scheme then you can try setting this to
|
|
# off. This will cause Squid to forcibly close the connection on
|
|
# the initial requests where the browser asks which schemes are
|
|
# supported by the proxy.
|
|
#
|
|
# auth_param negotiate keep_alive on
|
|
#
|
|
#
|
|
# Examples:
|
|
#
|
|
##Recommended minimum configuration per scheme:
|
|
##auth_param negotiate program <uncomment and complete this line to activate>
|
|
##auth_param negotiate children 20 startup=0 idle=1
|
|
##auth_param negotiate keep_alive on
|
|
##
|
|
##auth_param ntlm program <uncomment and complete this line to activate>
|
|
##auth_param ntlm children 20 startup=0 idle=1
|
|
##auth_param ntlm keep_alive on
|
|
##
|
|
##auth_param digest program <uncomment and complete this line>
|
|
##auth_param digest children 20 startup=0 idle=1
|
|
##auth_param digest realm Squid proxy-caching web server
|
|
##auth_param digest nonce_garbage_interval 5 minutes
|
|
##auth_param digest nonce_max_duration 30 minutes
|
|
##auth_param digest nonce_max_count 50
|
|
##
|
|
##auth_param basic program <uncomment and complete this line>
|
|
##auth_param basic children 5 startup=5 idle=1
|
|
##auth_param basic realm Squid proxy-caching web server
|
|
##auth_param basic credentialsttl 2 hours
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: authenticate_cache_garbage_interval
|
|
# The time period between garbage collection across the username cache.
|
|
# This is a trade-off between memory utilization (long intervals - say
|
|
# 2 days) and CPU (short intervals - say 1 minute). Only change if you
|
|
# have good reason to.
|
|
#Default:
|
|
# authenticate_cache_garbage_interval 1 hour
|
|
|
|
# TAG: authenticate_ttl
|
|
# The time a user & their credentials stay in the logged in
|
|
# user cache since their last request. When the garbage
|
|
# interval passes, all user credentials that have passed their
|
|
# TTL are removed from memory.
|
|
#Default:
|
|
# authenticate_ttl 1 hour
|
|
|
|
# TAG: authenticate_ip_ttl
|
|
# If you use proxy authentication and the 'max_user_ip' ACL,
|
|
# this directive controls how long Squid remembers the IP
|
|
# addresses associated with each user. Use a small value
|
|
# (e.g., 60 seconds) if your users might change addresses
|
|
# quickly, as is the case with dialup. You might be safe
|
|
# using a larger value (e.g., 2 hours) in a corporate LAN
|
|
# environment with relatively static address assignments.
|
|
#Default:
|
|
# authenticate_ip_ttl 1 second
|
|
|
|
# ACCESS CONTROLS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: external_acl_type
|
|
# This option defines external acl classes using a helper program
|
|
# to look up the status
|
|
#
|
|
# external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..]
|
|
#
|
|
# Options:
|
|
#
|
|
# ttl=n TTL in seconds for cached results (defaults to 3600
|
|
# for 1 hour)
|
|
#
|
|
# negative_ttl=n
|
|
# TTL for cached negative lookups (default same
|
|
# as ttl)
|
|
#
|
|
# grace=n Percentage remaining of TTL where a refresh of a
|
|
# cached entry should be initiated without needing to
|
|
# wait for a new reply. (default is for no grace period)
|
|
#
|
|
# cache=n Limit the result cache size, default is 262144.
|
|
# The expanded FORMAT value is used as the cache key, so
|
|
# if the details in FORMAT are highly variable a larger
|
|
# cache may be needed to produce reduction in helper load.
|
|
#
|
|
# children-max=n
|
|
# Maximum number of acl helper processes spawned to service
|
|
# external acl lookups of this type. (default 20)
|
|
#
|
|
# children-startup=n
|
|
# Minimum number of acl helper processes to spawn during
|
|
# startup and reconfigure to service external acl lookups
|
|
# of this type. (default 0)
|
|
#
|
|
# children-idle=n
|
|
# Number of acl helper processes to keep ahead of traffic
|
|
# loads. Squid will spawn this many at once whenever load
|
|
# rises above the capabilities of existing processes.
|
|
# Up to the value of children-max. (default 1)
|
|
#
|
|
# concurrency=n concurrency level per process. Only used with helpers
|
|
# capable of processing more than one query at a time.
|
|
#
|
|
# protocol=2.5 Compatibility mode for Squid-2.5 external acl helpers.
|
|
#
|
|
# ipv4 / ipv6 IP protocol used to communicate with this helper.
|
|
# The default is to auto-detect IPv6 and use it when available.
|
|
#
|
|
#
|
|
# FORMAT specifications
|
|
#
|
|
# %LOGIN Authenticated user login name
|
|
# %EXT_USER Username from previous external acl
|
|
# %EXT_LOG Log details from previous external acl
|
|
# %EXT_TAG Tag from previous external acl
|
|
# %IDENT Ident user name
|
|
# %SRC Client IP
|
|
# %SRCPORT Client source port
|
|
# %URI Requested URI
|
|
# %DST Requested host
|
|
# %PROTO Requested protocol
|
|
# %PORT Requested port
|
|
# %PATH Requested URL path
|
|
# %METHOD Request method
|
|
# %MYADDR Squid interface address
|
|
# %MYPORT Squid http_port number
|
|
# %PATH Requested URL-path (including query-string if any)
|
|
# %USER_CERT SSL User certificate in PEM format
|
|
# %USER_CERTCHAIN SSL User certificate chain in PEM format
|
|
# %USER_CERT_xx SSL User certificate subject attribute xx
|
|
# %USER_CA_CERT_xx SSL User certificate issuer attribute xx
|
|
#
|
|
# %>{Header} HTTP request header "Header"
|
|
# %>{Hdr:member}
|
|
# HTTP request header "Hdr" list member "member"
|
|
# %>{Hdr:;member}
|
|
# HTTP request header list member using ; as
|
|
# list separator. ; can be any non-alphanumeric
|
|
# character.
|
|
#
|
|
# %<{Header} HTTP reply header "Header"
|
|
# %<{Hdr:member}
|
|
# HTTP reply header "Hdr" list member "member"
|
|
# %<{Hdr:;member}
|
|
# HTTP reply header list member using ; as
|
|
# list separator. ; can be any non-alphanumeric
|
|
# character.
|
|
#
|
|
# %ACL The name of the ACL being tested.
|
|
# %DATA The ACL arguments. If not used then any arguments
|
|
# is automatically added at the end of the line
|
|
# sent to the helper.
|
|
# NOTE: this will encode the arguments as one token,
|
|
# whereas the default will pass each separately.
|
|
#
|
|
# %% The percent sign. Useful for helpers which need
|
|
# an unchanging input format.
|
|
#
|
|
#
|
|
# General request syntax:
|
|
#
|
|
# [channel-ID] FORMAT-values [acl-values ...]
|
|
#
|
|
#
|
|
# FORMAT-values consists of transaction details expanded with
|
|
# whitespace separation per the config file FORMAT specification
|
|
# using the FORMAT macros listed above.
|
|
#
|
|
# acl-values consists of any string specified in the referencing
|
|
# config 'acl ... external' line. see the "acl external" directive.
|
|
#
|
|
# Request values sent to the helper are URL escaped to protect
|
|
# each value in requests against whitespaces.
|
|
#
|
|
# If using protocol=2.5 then the request sent to the helper is not
|
|
# URL escaped to protect against whitespace.
|
|
#
|
|
# NOTE: protocol=3.0 is deprecated as no longer necessary.
|
|
#
|
|
# When using the concurrency= option the protocol is changed by
|
|
# introducing a query channel tag in front of the request/response.
|
|
# The query channel tag is a number between 0 and concurrency-1.
|
|
# This value must be echoed back unchanged to Squid as the first part
|
|
# of the response relating to its request.
|
|
#
|
|
#
|
|
# The helper receives lines expanded per the above format specification
|
|
# and for each input line returns 1 line starting with OK/ERR/BH result
|
|
# code and optionally followed by additional keywords with more details.
|
|
#
|
|
#
|
|
# General result syntax:
|
|
#
|
|
# [channel-ID] result keyword=value ...
|
|
#
|
|
# Result consists of one of the codes:
|
|
#
|
|
# OK
|
|
# the ACL test produced a match.
|
|
#
|
|
# ERR
|
|
# the ACL test does not produce a match.
|
|
#
|
|
# BH
|
|
# An internal error occurred in the helper, preventing
|
|
# a result being identified.
|
|
#
|
|
# The meaning of 'a match' is determined by your squid.conf
|
|
# access control configuration. See the Squid wiki for details.
|
|
#
|
|
# Defined keywords:
|
|
#
|
|
# user= The users name (login)
|
|
#
|
|
# password= The users password (for login= cache_peer option)
|
|
#
|
|
# message= Message describing the reason for this response.
|
|
# Available as %o in error pages.
|
|
# Useful on (ERR and BH results).
|
|
#
|
|
# tag= Apply a tag to a request. Only sets a tag once,
|
|
# does not alter existing tags.
|
|
#
|
|
# log= String to be logged in access.log. Available as
|
|
# %ea in logformat specifications.
|
|
#
|
|
# Any keywords may be sent on any response whether OK, ERR or BH.
|
|
#
|
|
# All response keyword values need to be a single token with URL
|
|
# escaping, or enclosed in double quotes (") and escaped using \ on
|
|
# any double quotes or \ characters within the value. The wrapping
|
|
# double quotes are removed before the value is interpreted by Squid.
|
|
# \r and \n are also replace by CR and LF.
|
|
#
|
|
# Some example key values:
|
|
#
|
|
# user=John%20Smith
|
|
# user="John Smith"
|
|
# user="J. \"Bob\" Smith"
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: acl
|
|
# Defining an Access List
|
|
#
|
|
# Every access list definition must begin with an aclname and acltype,
|
|
# followed by either type-specific arguments or a quoted filename that
|
|
# they are read from.
|
|
#
|
|
# acl aclname acltype argument ...
|
|
# acl aclname acltype "file" ...
|
|
#
|
|
# When using "file", the file should contain one item per line.
|
|
#
|
|
# Some acl types supports options which changes their default behaviour.
|
|
# The available options are:
|
|
#
|
|
# -i,+i By default, regular expressions are CASE-SENSITIVE. To make them
|
|
# case-insensitive, use the -i option. To return case-sensitive
|
|
# use the +i option between patterns, or make a new ACL line
|
|
# without -i.
|
|
#
|
|
# -n Disable lookups and address type conversions. If lookup or
|
|
# conversion is required because the parameter type (IP or
|
|
# domain name) does not match the message address type (domain
|
|
# name or IP), then the ACL would immediately declare a mismatch
|
|
# without any warnings or lookups.
|
|
#
|
|
# -- Used to stop processing all options, in the case the first acl
|
|
# value has '-' character as first character (for example the '-'
|
|
# is a valid domain name)
|
|
#
|
|
# Some acl types require suspending the current request in order
|
|
# to access some external data source.
|
|
# Those which do are marked with the tag [slow], those which
|
|
# don't are marked as [fast].
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl
|
|
# for further information
|
|
#
|
|
# ***** ACL TYPES AVAILABLE *****
|
|
#
|
|
# acl aclname src ip-address/mask ... # clients IP address [fast]
|
|
# acl aclname src addr1-addr2/mask ... # range of addresses [fast]
|
|
# acl aclname dst [-n] ip-address/mask ... # URL host's IP address [slow]
|
|
# acl aclname localip ip-address/mask ... # IP address the client connected to [fast]
|
|
#
|
|
# acl aclname arp mac-address ... (xx:xx:xx:xx:xx:xx notation)
|
|
# # The arp ACL requires the special configure option --enable-arp-acl.
|
|
# # Furthermore, the ARP ACL code is not portable to all operating systems.
|
|
# # It works on Linux, Solaris, Windows, FreeBSD, and some
|
|
# # other *BSD variants.
|
|
# # [fast]
|
|
# #
|
|
# # NOTE: Squid can only determine the MAC address for clients that are on
|
|
# # the same subnet. If the client is on a different subnet,
|
|
# # then Squid cannot find out its MAC address.
|
|
#
|
|
# acl aclname srcdomain .foo.com ...
|
|
# # reverse lookup, from client IP [slow]
|
|
# acl aclname dstdomain [-n] .foo.com ...
|
|
# # Destination server from URL [fast]
|
|
# acl aclname srcdom_regex [-i] \.foo\.com ...
|
|
# # regex matching client name [slow]
|
|
# acl aclname dstdom_regex [-n] [-i] \.foo\.com ...
|
|
# # regex matching server [fast]
|
|
# #
|
|
# # For dstdomain and dstdom_regex a reverse lookup is tried if a IP
|
|
# # based URL is used and no match is found. The name "none" is used
|
|
# # if the reverse lookup fails.
|
|
#
|
|
# acl aclname src_as number ...
|
|
# acl aclname dst_as number ...
|
|
# # [fast]
|
|
# # Except for access control, AS numbers can be used for
|
|
# # routing of requests to specific caches. Here's an
|
|
# # example for routing all requests for AS#1241 and only
|
|
# # those to mycache.mydomain.net:
|
|
# # acl asexample dst_as 1241
|
|
# # cache_peer_access mycache.mydomain.net allow asexample
|
|
# # cache_peer_access mycache_mydomain.net deny all
|
|
#
|
|
# acl aclname peername myPeer ...
|
|
# # [fast]
|
|
# # match against a named cache_peer entry
|
|
# # set unique name= on cache_peer lines for reliable use.
|
|
#
|
|
# acl aclname time [day-abbrevs] [h1:m1-h2:m2]
|
|
# # [fast]
|
|
# # day-abbrevs:
|
|
# # S - Sunday
|
|
# # M - Monday
|
|
# # T - Tuesday
|
|
# # W - Wednesday
|
|
# # H - Thursday
|
|
# # F - Friday
|
|
# # A - Saturday
|
|
# # h1:m1 must be less than h2:m2
|
|
#
|
|
# acl aclname url_regex [-i] ^http:// ...
|
|
# # regex matching on whole URL [fast]
|
|
# acl aclname urllogin [-i] [^a-zA-Z0-9] ...
|
|
# # regex matching on URL login field
|
|
# acl aclname urlpath_regex [-i] \.gif$ ...
|
|
# # regex matching on URL path [fast]
|
|
#
|
|
# acl aclname port 80 70 21 0-1024... # destination TCP port [fast]
|
|
# # ranges are alloed
|
|
# acl aclname localport 3128 ... # TCP port the client connected to [fast]
|
|
# # NP: for interception mode this is usually '80'
|
|
#
|
|
# acl aclname myportname 3128 ... # http(s)_port name [fast]
|
|
#
|
|
# acl aclname proto HTTP FTP ... # request protocol [fast]
|
|
#
|
|
# acl aclname method GET POST ... # HTTP request method [fast]
|
|
#
|
|
# acl aclname http_status 200 301 500- 400-403 ...
|
|
# # status code in reply [fast]
|
|
#
|
|
# acl aclname browser [-i] regexp ...
|
|
# # pattern match on User-Agent header (see also req_header below) [fast]
|
|
#
|
|
# acl aclname referer_regex [-i] regexp ...
|
|
# # pattern match on Referer header [fast]
|
|
# # Referer is highly unreliable, so use with care
|
|
#
|
|
# acl aclname ident username ...
|
|
# acl aclname ident_regex [-i] pattern ...
|
|
# # string match on ident output [slow]
|
|
# # use REQUIRED to accept any non-null ident.
|
|
#
|
|
# acl aclname proxy_auth [-i] username ...
|
|
# acl aclname proxy_auth_regex [-i] pattern ...
|
|
# # perform http authentication challenge to the client and match against
|
|
# # supplied credentials [slow]
|
|
# #
|
|
# # takes a list of allowed usernames.
|
|
# # use REQUIRED to accept any valid username.
|
|
# #
|
|
# # Will use proxy authentication in forward-proxy scenarios, and plain
|
|
# # http authenticaiton in reverse-proxy scenarios
|
|
# #
|
|
# # NOTE: when a Proxy-Authentication header is sent but it is not
|
|
# # needed during ACL checking the username is NOT logged
|
|
# # in access.log.
|
|
# #
|
|
# # NOTE: proxy_auth requires a EXTERNAL authentication program
|
|
# # to check username/password combinations (see
|
|
# # auth_param directive).
|
|
# #
|
|
# # NOTE: proxy_auth can't be used in a transparent/intercepting proxy
|
|
# # as the browser needs to be configured for using a proxy in order
|
|
# # to respond to proxy authentication.
|
|
#
|
|
# acl aclname snmp_community string ...
|
|
# # A community string to limit access to your SNMP Agent [fast]
|
|
# # Example:
|
|
# #
|
|
# # acl snmppublic snmp_community public
|
|
#
|
|
# acl aclname maxconn number
|
|
# # This will be matched when the client's IP address has
|
|
# # more than <number> TCP connections established. [fast]
|
|
# # NOTE: This only measures direct TCP links so X-Forwarded-For
|
|
# # indirect clients are not counted.
|
|
#
|
|
# acl aclname max_user_ip [-s] number
|
|
# # This will be matched when the user attempts to log in from more
|
|
# # than <number> different ip addresses. The authenticate_ip_ttl
|
|
# # parameter controls the timeout on the ip entries. [fast]
|
|
# # If -s is specified the limit is strict, denying browsing
|
|
# # from any further IP addresses until the ttl has expired. Without
|
|
# # -s Squid will just annoy the user by "randomly" denying requests.
|
|
# # (the counter is reset each time the limit is reached and a
|
|
# # request is denied)
|
|
# # NOTE: in acceleration mode or where there is mesh of child proxies,
|
|
# # clients may appear to come from multiple addresses if they are
|
|
# # going through proxy farms, so a limit of 1 may cause user problems.
|
|
#
|
|
# acl aclname random probability
|
|
# # Pseudo-randomly match requests. Based on the probability given.
|
|
# # Probability may be written as a decimal (0.333), fraction (1/3)
|
|
# # or ratio of matches:non-matches (3:5).
|
|
#
|
|
# acl aclname req_mime_type [-i] mime-type ...
|
|
# # regex match against the mime type of the request generated
|
|
# # by the client. Can be used to detect file upload or some
|
|
# # types HTTP tunneling requests [fast]
|
|
# # NOTE: This does NOT match the reply. You cannot use this
|
|
# # to match the returned file type.
|
|
#
|
|
# acl aclname req_header header-name [-i] any\.regex\.here
|
|
# # regex match against any of the known request headers. May be
|
|
# # thought of as a superset of "browser", "referer" and "mime-type"
|
|
# # ACL [fast]
|
|
#
|
|
# acl aclname rep_mime_type [-i] mime-type ...
|
|
# # regex match against the mime type of the reply received by
|
|
# # squid. Can be used to detect file download or some
|
|
# # types HTTP tunneling requests. [fast]
|
|
# # NOTE: This has no effect in http_access rules. It only has
|
|
# # effect in rules that affect the reply data stream such as
|
|
# # http_reply_access.
|
|
#
|
|
# acl aclname rep_header header-name [-i] any\.regex\.here
|
|
# # regex match against any of the known reply headers. May be
|
|
# # thought of as a superset of "browser", "referer" and "mime-type"
|
|
# # ACLs [fast]
|
|
#
|
|
# acl aclname external class_name [arguments...]
|
|
# # external ACL lookup via a helper class defined by the
|
|
# # external_acl_type directive [slow]
|
|
#
|
|
# acl aclname user_cert attribute values...
|
|
# # match against attributes in a user SSL certificate
|
|
# # attribute is one of DN/C/O/CN/L/ST [fast]
|
|
#
|
|
# acl aclname ca_cert attribute values...
|
|
# # match against attributes a users issuing CA SSL certificate
|
|
# # attribute is one of DN/C/O/CN/L/ST [fast]
|
|
#
|
|
# acl aclname ext_user username ...
|
|
# acl aclname ext_user_regex [-i] pattern ...
|
|
# # string match on username returned by external acl helper [slow]
|
|
# # use REQUIRED to accept any non-null user name.
|
|
#
|
|
# acl aclname tag tagvalue ...
|
|
# # string match on tag returned by external acl helper [slow]
|
|
#
|
|
# acl aclname hier_code codename ...
|
|
# # string match against squid hierarchy code(s); [fast]
|
|
# # e.g., DIRECT, PARENT_HIT, NONE, etc.
|
|
# #
|
|
# # NOTE: This has no effect in http_access rules. It only has
|
|
# # effect in rules that affect the reply data stream such as
|
|
# # http_reply_access.
|
|
#
|
|
# acl aclname note name [value ...]
|
|
# # match transaction annotation [fast]
|
|
# # Without values, matches any annotation with a given name.
|
|
# # With value(s), matches any annotation with a given name that
|
|
# # also has one of the given values.
|
|
# # Names and values are compared using a string equality test.
|
|
# # Annotation sources include note and adaptation_meta directives
|
|
# # as well as helper and eCAP responses.
|
|
#
|
|
# acl aclname any-of acl1 acl2 ...
|
|
# # match any one of the acls [fast or slow]
|
|
# # The first matching ACL stops further ACL evaluation.
|
|
# #
|
|
# # ACLs from multiple any-of lines with the same name are ORed.
|
|
# # For example, A = (a1 or a2) or (a3 or a4) can be written as
|
|
# # acl A any-of a1 a2
|
|
# # acl A any-of a3 a4
|
|
# #
|
|
# # This group ACL is fast if all evaluated ACLs in the group are fast
|
|
# # and slow otherwise.
|
|
#
|
|
# acl aclname all-of acl1 acl2 ...
|
|
# # match all of the acls [fast or slow]
|
|
# # The first mismatching ACL stops further ACL evaluation.
|
|
# #
|
|
# # ACLs from multiple all-of lines with the same name are ORed.
|
|
# # For example, B = (b1 and b2) or (b3 and b4) can be written as
|
|
# # acl B all-of b1 b2
|
|
# # acl B all-of b3 b4
|
|
# #
|
|
# # This group ACL is fast if all evaluated ACLs in the group are fast
|
|
# # and slow otherwise.
|
|
#
|
|
# Examples:
|
|
# acl macaddress arp 09:00:2b:23:45:67
|
|
# acl myexample dst_as 1241
|
|
# acl password proxy_auth REQUIRED
|
|
# acl fileupload req_mime_type -i ^multipart/form-data$
|
|
# acl javascript rep_mime_type -i ^application/x-javascript$
|
|
#
|
|
#Default:
|
|
# ACLs all, manager, localhost, and to_localhost are predefined.
|
|
#
|
|
#
|
|
# Recommended minimum configuration:
|
|
#
|
|
|
|
# Example rule allowing access from your local networks.
|
|
# Adapt to list your (internal) IP networks from where browsing
|
|
# should be allowed
|
|
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
|
|
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
|
|
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
|
|
acl localnet src fc00::/7 # RFC 4193 local private network range
|
|
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
|
|
|
|
acl SSL_ports port 443
|
|
acl Safe_ports port 80 # http
|
|
acl Safe_ports port 21 # ftp
|
|
acl Safe_ports port 443 # https
|
|
acl Safe_ports port 70 # gopher
|
|
acl Safe_ports port 210 # wais
|
|
acl Safe_ports port 1025-65535 # unregistered ports
|
|
acl Safe_ports port 280 # http-mgmt
|
|
acl Safe_ports port 488 # gss-http
|
|
acl Safe_ports port 591 # filemaker
|
|
acl Safe_ports port 777 # multiling http
|
|
acl CONNECT method CONNECT
|
|
|
|
# TAG: follow_x_forwarded_for
|
|
# Allowing or Denying the X-Forwarded-For header to be followed to
|
|
# find the original source of a request.
|
|
#
|
|
# Requests may pass through a chain of several other proxies
|
|
# before reaching us. The X-Forwarded-For header will contain a
|
|
# comma-separated list of the IP addresses in the chain, with the
|
|
# rightmost address being the most recent.
|
|
#
|
|
# If a request reaches us from a source that is allowed by this
|
|
# configuration item, then we consult the X-Forwarded-For header
|
|
# to see where that host received the request from. If the
|
|
# X-Forwarded-For header contains multiple addresses, we continue
|
|
# backtracking until we reach an address for which we are not allowed
|
|
# to follow the X-Forwarded-For header, or until we reach the first
|
|
# address in the list. For the purpose of ACL used in the
|
|
# follow_x_forwarded_for directive the src ACL type always matches
|
|
# the address we are testing and srcdomain matches its rDNS.
|
|
#
|
|
# The end result of this process is an IP address that we will
|
|
# refer to as the indirect client address. This address may
|
|
# be treated as the client address for access control, ICAP, delay
|
|
# pools and logging, depending on the acl_uses_indirect_client,
|
|
# icap_uses_indirect_client, delay_pool_uses_indirect_client,
|
|
# log_uses_indirect_client and tproxy_uses_indirect_client options.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
# SECURITY CONSIDERATIONS:
|
|
#
|
|
# Any host for which we follow the X-Forwarded-For header
|
|
# can place incorrect information in the header, and Squid
|
|
# will use the incorrect information as if it were the
|
|
# source address of the request. This may enable remote
|
|
# hosts to bypass any access control restrictions that are
|
|
# based on the client's source addresses.
|
|
#
|
|
# For example:
|
|
#
|
|
# acl localhost src 127.0.0.1
|
|
# acl my_other_proxy srcdomain .proxy.example.com
|
|
# follow_x_forwarded_for allow localhost
|
|
# follow_x_forwarded_for allow my_other_proxy
|
|
#Default:
|
|
# X-Forwarded-For header will be ignored.
|
|
|
|
# TAG: acl_uses_indirect_client on|off
|
|
# Controls whether the indirect client address
|
|
# (see follow_x_forwarded_for) is used instead of the
|
|
# direct client address in acl matching.
|
|
#
|
|
# NOTE: maxconn ACL considers direct TCP links and indirect
|
|
# clients will always have zero. So no match.
|
|
#Default:
|
|
# acl_uses_indirect_client on
|
|
|
|
# TAG: delay_pool_uses_indirect_client on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-follow-x-forwarded-for and --enable-delay-pools
|
|
#
|
|
# Controls whether the indirect client address
|
|
# (see follow_x_forwarded_for) is used instead of the
|
|
# direct client address in delay pools.
|
|
#Default:
|
|
# delay_pool_uses_indirect_client on
|
|
|
|
# TAG: log_uses_indirect_client on|off
|
|
# Controls whether the indirect client address
|
|
# (see follow_x_forwarded_for) is used instead of the
|
|
# direct client address in the access log.
|
|
#Default:
|
|
# log_uses_indirect_client on
|
|
|
|
# TAG: tproxy_uses_indirect_client on|off
|
|
# Controls whether the indirect client address
|
|
# (see follow_x_forwarded_for) is used instead of the
|
|
# direct client address when spoofing the outgoing client.
|
|
#
|
|
# This has no effect on requests arriving in non-tproxy
|
|
# mode ports.
|
|
#
|
|
# SECURITY WARNING: Usage of this option is dangerous
|
|
# and should not be used trivially. Correct configuration
|
|
# of follow_x_forewarded_for with a limited set of trusted
|
|
# sources is required to prevent abuse of your proxy.
|
|
#Default:
|
|
# tproxy_uses_indirect_client off
|
|
|
|
# TAG: spoof_client_ip
|
|
# Control client IP address spoofing of TPROXY traffic based on
|
|
# defined access lists.
|
|
#
|
|
# spoof_client_ip allow|deny [!]aclname ...
|
|
#
|
|
# If there are no "spoof_client_ip" lines present, the default
|
|
# is to "allow" spoofing of any suitable request.
|
|
#
|
|
# Note that the cache_peer "no-tproxy" option overrides this ACL.
|
|
#
|
|
# This clause supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Allow spoofing on all TPROXY traffic.
|
|
|
|
# TAG: http_access
|
|
# Allowing or Denying access based on defined access lists
|
|
#
|
|
# Access to the HTTP port:
|
|
# http_access allow|deny [!]aclname ...
|
|
#
|
|
# NOTE on default values:
|
|
#
|
|
# If there are no "access" lines present, the default is to deny
|
|
# the request.
|
|
#
|
|
# If none of the "access" lines cause a match, the default is the
|
|
# opposite of the last line in the list. If the last line was
|
|
# deny, the default is allow. Conversely, if the last line
|
|
# is allow, the default will be deny. For these reasons, it is a
|
|
# good idea to have an "deny all" entry at the end of your access
|
|
# lists to avoid potential confusion.
|
|
#
|
|
# This clause supports both fast and slow acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
#Default:
|
|
# Deny, unless rules exist in squid.conf.
|
|
#
|
|
|
|
#
|
|
# Recommended minimum Access Permission configuration:
|
|
#
|
|
# Deny requests to certain unsafe ports
|
|
http_access deny !Safe_ports
|
|
|
|
# Deny CONNECT to other than secure SSL ports
|
|
http_access deny CONNECT !SSL_ports
|
|
|
|
# Only allow cachemgr access from localhost
|
|
http_access allow localhost manager
|
|
http_access deny manager
|
|
|
|
# We strongly recommend the following be uncommented to protect innocent
|
|
# web applications running on the proxy server who think the only
|
|
# one who can access services on "localhost" is a local user
|
|
#http_access deny to_localhost
|
|
|
|
#
|
|
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
|
|
#
|
|
|
|
# Example rule allowing access from your local networks.
|
|
# Adapt localnet in the ACL section to list your (internal) IP networks
|
|
# from where browsing should be allowed
|
|
http_access allow localnet
|
|
http_access allow localhost
|
|
|
|
# And finally deny all other access to this proxy
|
|
http_access deny all
|
|
|
|
# TAG: adapted_http_access
|
|
# Allowing or Denying access based on defined access lists
|
|
#
|
|
# Essentially identical to http_access, but runs after redirectors
|
|
# and ICAP/eCAP adaptation. Allowing access control based on their
|
|
# output.
|
|
#
|
|
# If not set then only http_access is used.
|
|
#Default:
|
|
# Allow, unless rules exist in squid.conf.
|
|
|
|
# TAG: http_reply_access
|
|
# Allow replies to client requests. This is complementary to http_access.
|
|
#
|
|
# http_reply_access allow|deny [!] aclname ...
|
|
#
|
|
# NOTE: if there are no access lines present, the default is to allow
|
|
# all replies.
|
|
#
|
|
# If none of the access lines cause a match the opposite of the
|
|
# last line will apply. Thus it is good practice to end the rules
|
|
# with an "allow all" or "deny all" entry.
|
|
#
|
|
# This clause supports both fast and slow acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Allow, unless rules exist in squid.conf.
|
|
|
|
# TAG: icp_access
|
|
# Allowing or Denying access to the ICP port based on defined
|
|
# access lists
|
|
#
|
|
# icp_access allow|deny [!]aclname ...
|
|
#
|
|
# NOTE: The default if no icp_access lines are present is to
|
|
# deny all traffic. This default may cause problems with peers
|
|
# using ICP.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
## Allow ICP queries from local networks only
|
|
##icp_access allow localnet
|
|
##icp_access deny all
|
|
#Default:
|
|
# Deny, unless rules exist in squid.conf.
|
|
|
|
# TAG: htcp_access
|
|
# Allowing or Denying access to the HTCP port based on defined
|
|
# access lists
|
|
#
|
|
# htcp_access allow|deny [!]aclname ...
|
|
#
|
|
# See also htcp_clr_access for details on access control for
|
|
# cache purge (CLR) HTCP messages.
|
|
#
|
|
# NOTE: The default if no htcp_access lines are present is to
|
|
# deny all traffic. This default may cause problems with peers
|
|
# using the htcp option.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
## Allow HTCP queries from local networks only
|
|
##htcp_access allow localnet
|
|
##htcp_access deny all
|
|
#Default:
|
|
# Deny, unless rules exist in squid.conf.
|
|
|
|
# TAG: htcp_clr_access
|
|
# Allowing or Denying access to purge content using HTCP based
|
|
# on defined access lists.
|
|
# See htcp_access for details on general HTCP access control.
|
|
#
|
|
# htcp_clr_access allow|deny [!]aclname ...
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
## Allow HTCP CLR requests from trusted peers
|
|
#acl htcp_clr_peer src 192.0.2.2 2001:DB8::2
|
|
#htcp_clr_access allow htcp_clr_peer
|
|
#htcp_clr_access deny all
|
|
#Default:
|
|
# Deny, unless rules exist in squid.conf.
|
|
|
|
# TAG: miss_access
|
|
# Determins whether network access is permitted when satisfying a request.
|
|
#
|
|
# For example;
|
|
# to force your neighbors to use you as a sibling instead of
|
|
# a parent.
|
|
#
|
|
# acl localclients src 192.0.2.0/24 2001:DB8::a:0/64
|
|
# miss_access deny !localclients
|
|
# miss_access allow all
|
|
#
|
|
# This means only your local clients are allowed to fetch relayed/MISS
|
|
# replies from the network and all other clients can only fetch cached
|
|
# objects (HITs).
|
|
#
|
|
# The default for this setting allows all clients who passed the
|
|
# http_access rules to relay via this proxy.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Allow, unless rules exist in squid.conf.
|
|
|
|
# TAG: ident_lookup_access
|
|
# A list of ACL elements which, if matched, cause an ident
|
|
# (RFC 931) lookup to be performed for this request. For
|
|
# example, you might choose to always perform ident lookups
|
|
# for your main multi-user Unix boxes, but not for your Macs
|
|
# and PCs. By default, ident lookups are not performed for
|
|
# any requests.
|
|
#
|
|
# To enable ident lookups for specific client addresses, you
|
|
# can follow this example:
|
|
#
|
|
# acl ident_aware_hosts src 198.168.1.0/24
|
|
# ident_lookup_access allow ident_aware_hosts
|
|
# ident_lookup_access deny all
|
|
#
|
|
# Only src type ACL checks are fully supported. A srcdomain
|
|
# ACL might work at times, but it will not always provide
|
|
# the correct result.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Unless rules exist in squid.conf, IDENT is not fetched.
|
|
|
|
# TAG: reply_body_max_size size [acl acl...]
|
|
# This option specifies the maximum size of a reply body. It can be
|
|
# used to prevent users from downloading very large files, such as
|
|
# MP3's and movies. When the reply headers are received, the
|
|
# reply_body_max_size lines are processed, and the first line where
|
|
# all (if any) listed ACLs are true is used as the maximum body size
|
|
# for this reply.
|
|
#
|
|
# This size is checked twice. First when we get the reply headers,
|
|
# we check the content-length value. If the content length value exists
|
|
# and is larger than the allowed size, the request is denied and the
|
|
# user receives an error message that says "the request or reply
|
|
# is too large." If there is no content-length, and the reply
|
|
# size exceeds this limit, the client's connection is just closed
|
|
# and they will receive a partial reply.
|
|
#
|
|
# WARNING: downstream caches probably can not detect a partial reply
|
|
# if there is no content-length header, so they will cache
|
|
# partial responses and give them out as hits. You should NOT
|
|
# use this option if you have downstream caches.
|
|
#
|
|
# WARNING: A maximum size smaller than the size of squid's error messages
|
|
# will cause an infinite loop and crash squid. Ensure that the smallest
|
|
# non-zero value you use is greater that the maximum header size plus
|
|
# the size of your largest error page.
|
|
#
|
|
# If you set this parameter none (the default), there will be
|
|
# no limit imposed.
|
|
#
|
|
# Configuration Format is:
|
|
# reply_body_max_size SIZE UNITS [acl ...]
|
|
# ie.
|
|
# reply_body_max_size 10 MB
|
|
#
|
|
#Default:
|
|
# No limit is applied.
|
|
|
|
# NETWORK OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: http_port
|
|
# Usage: port [mode] [options]
|
|
# hostname:port [mode] [options]
|
|
# 1.2.3.4:port [mode] [options]
|
|
#
|
|
# The socket addresses where Squid will listen for HTTP client
|
|
# requests. You may specify multiple socket addresses.
|
|
# There are three forms: port alone, hostname with port, and
|
|
# IP address with port. If you specify a hostname or IP
|
|
# address, Squid binds the socket to that specific
|
|
# address. Most likely, you do not need to bind to a specific
|
|
# address, so you can use the port number alone.
|
|
#
|
|
# If you are running Squid in accelerator mode, you
|
|
# probably want to listen on port 80 also, or instead.
|
|
#
|
|
# The -a command line option may be used to specify additional
|
|
# port(s) where Squid listens for proxy request. Such ports will
|
|
# be plain proxy ports with no options.
|
|
#
|
|
# You may specify multiple socket addresses on multiple lines.
|
|
#
|
|
# Modes:
|
|
#
|
|
# intercept Support for IP-Layer interception of
|
|
# outgoing requests without browser settings.
|
|
# NP: disables authentication and IPv6 on the port.
|
|
#
|
|
# tproxy Support Linux TPROXY for spoofing outgoing
|
|
# connections using the client IP address.
|
|
# NP: disables authentication and maybe IPv6 on the port.
|
|
#
|
|
# accel Accelerator / reverse proxy mode
|
|
#
|
|
# ssl-bump For each CONNECT request allowed by ssl_bump ACLs,
|
|
# establish secure connection with the client and with
|
|
# the server, decrypt HTTPS messages as they pass through
|
|
# Squid, and treat them as unencrypted HTTP messages,
|
|
# becoming the man-in-the-middle.
|
|
#
|
|
# The ssl_bump option is required to fully enable
|
|
# bumping of CONNECT requests.
|
|
#
|
|
# Omitting the mode flag causes default forward proxy mode to be used.
|
|
#
|
|
#
|
|
# Accelerator Mode Options:
|
|
#
|
|
# defaultsite=domainname
|
|
# What to use for the Host: header if it is not present
|
|
# in a request. Determines what site (not origin server)
|
|
# accelerators should consider the default.
|
|
#
|
|
# no-vhost Disable using HTTP/1.1 Host header for virtual domain support.
|
|
#
|
|
# protocol= Protocol to reconstruct accelerated requests with.
|
|
# Defaults to http for http_port and https for
|
|
# https_port
|
|
#
|
|
# vport Virtual host port support. Using the http_port number
|
|
# instead of the port passed on Host: headers.
|
|
#
|
|
# vport=NN Virtual host port support. Using the specified port
|
|
# number instead of the port passed on Host: headers.
|
|
#
|
|
# act-as-origin
|
|
# Act as if this Squid is the origin server.
|
|
# This currently means generate new Date: and Expires:
|
|
# headers on HIT instead of adding Age:.
|
|
#
|
|
# ignore-cc Ignore request Cache-Control headers.
|
|
#
|
|
# WARNING: This option violates HTTP specifications if
|
|
# used in non-accelerator setups.
|
|
#
|
|
# allow-direct Allow direct forwarding in accelerator mode. Normally
|
|
# accelerated requests are denied direct forwarding as if
|
|
# never_direct was used.
|
|
#
|
|
# WARNING: this option opens accelerator mode to security
|
|
# vulnerabilities usually only affecting in interception
|
|
# mode. Make sure to protect forwarding with suitable
|
|
# http_access rules when using this.
|
|
#
|
|
#
|
|
# SSL Bump Mode Options:
|
|
# In addition to these options ssl-bump requires TLS/SSL options.
|
|
#
|
|
# generate-host-certificates[=<on|off>]
|
|
# Dynamically create SSL server certificates for the
|
|
# destination hosts of bumped CONNECT requests.When
|
|
# enabled, the cert and key options are used to sign
|
|
# generated certificates. Otherwise generated
|
|
# certificate will be selfsigned.
|
|
# If there is a CA certificate lifetime of the generated
|
|
# certificate equals lifetime of the CA certificate. If
|
|
# generated certificate is selfsigned lifetime is three
|
|
# years.
|
|
# This option is enabled by default when ssl-bump is used.
|
|
# See the ssl-bump option above for more information.
|
|
#
|
|
# dynamic_cert_mem_cache_size=SIZE
|
|
# Approximate total RAM size spent on cached generated
|
|
# certificates. If set to zero, caching is disabled. The
|
|
# default value is 4MB.
|
|
#
|
|
# TLS / SSL Options:
|
|
#
|
|
# cert= Path to SSL certificate (PEM format).
|
|
#
|
|
# key= Path to SSL private key file (PEM format)
|
|
# if not specified, the certificate file is
|
|
# assumed to be a combined certificate and
|
|
# key file.
|
|
#
|
|
# version= The version of SSL/TLS supported
|
|
# 1 automatic (default)
|
|
# 2 SSLv2 only
|
|
# 3 SSLv3 only
|
|
# 4 TLSv1.0 only
|
|
# 5 TLSv1.1 only
|
|
# 6 TLSv1.2 only
|
|
#
|
|
# cipher= Colon separated list of supported ciphers.
|
|
# NOTE: some ciphers such as EDH ciphers depend on
|
|
# additional settings. If those settings are
|
|
# omitted the ciphers may be silently ignored
|
|
# by the OpenSSL library.
|
|
#
|
|
# options= Various SSL implementation options. The most important
|
|
# being:
|
|
# NO_SSLv2 Disallow the use of SSLv2
|
|
# NO_SSLv3 Disallow the use of SSLv3
|
|
# NO_TLSv1 Disallow the use of TLSv1.0
|
|
# NO_TLSv1_1 Disallow the use of TLSv1.1
|
|
# NO_TLSv1_2 Disallow the use of TLSv1.2
|
|
# SINGLE_DH_USE Always create a new key when using
|
|
# temporary/ephemeral DH key exchanges
|
|
# ALL Enable various bug workarounds
|
|
# suggested as "harmless" by OpenSSL
|
|
# Be warned that this reduces SSL/TLS
|
|
# strength to some attacks.
|
|
# See OpenSSL SSL_CTX_set_options documentation for a
|
|
# complete list of options.
|
|
#
|
|
# clientca= File containing the list of CAs to use when
|
|
# requesting a client certificate.
|
|
#
|
|
# cafile= File containing additional CA certificates to
|
|
# use when verifying client certificates. If unset
|
|
# clientca will be used.
|
|
#
|
|
# capath= Directory containing additional CA certificates
|
|
# and CRL lists to use when verifying client certificates.
|
|
#
|
|
# crlfile= File of additional CRL lists to use when verifying
|
|
# the client certificate, in addition to CRLs stored in
|
|
# the capath. Implies VERIFY_CRL flag below.
|
|
#
|
|
# dhparams= File containing DH parameters for temporary/ephemeral
|
|
# DH key exchanges. See OpenSSL documentation for details
|
|
# on how to create this file.
|
|
# WARNING: EDH ciphers will be silently disabled if this
|
|
# option is not set.
|
|
#
|
|
# sslflags= Various flags modifying the use of SSL:
|
|
# DELAYED_AUTH
|
|
# Don't request client certificates
|
|
# immediately, but wait until acl processing
|
|
# requires a certificate (not yet implemented).
|
|
# NO_DEFAULT_CA
|
|
# Don't use the default CA lists built in
|
|
# to OpenSSL.
|
|
# NO_SESSION_REUSE
|
|
# Don't allow for session reuse. Each connection
|
|
# will result in a new SSL session.
|
|
# VERIFY_CRL
|
|
# Verify CRL lists when accepting client
|
|
# certificates.
|
|
# VERIFY_CRL_ALL
|
|
# Verify CRL lists for all certificates in the
|
|
# client certificate chain.
|
|
#
|
|
# sslcontext= SSL session ID context identifier.
|
|
#
|
|
# Other Options:
|
|
#
|
|
# connection-auth[=on|off]
|
|
# use connection-auth=off to tell Squid to prevent
|
|
# forwarding Microsoft connection oriented authentication
|
|
# (NTLM, Negotiate and Kerberos)
|
|
#
|
|
# disable-pmtu-discovery=
|
|
# Control Path-MTU discovery usage:
|
|
# off lets OS decide on what to do (default).
|
|
# transparent disable PMTU discovery when transparent
|
|
# support is enabled.
|
|
# always disable always PMTU discovery.
|
|
#
|
|
# In many setups of transparently intercepting proxies
|
|
# Path-MTU discovery can not work on traffic towards the
|
|
# clients. This is the case when the intercepting device
|
|
# does not fully track connections and fails to forward
|
|
# ICMP must fragment messages to the cache server. If you
|
|
# have such setup and experience that certain clients
|
|
# sporadically hang or never complete requests set
|
|
# disable-pmtu-discovery option to 'transparent'.
|
|
#
|
|
# name= Specifies a internal name for the port. Defaults to
|
|
# the port specification (port or addr:port)
|
|
#
|
|
# tcpkeepalive[=idle,interval,timeout]
|
|
# Enable TCP keepalive probes of idle connections.
|
|
# In seconds; idle is the initial time before TCP starts
|
|
# probing the connection, interval how often to probe, and
|
|
# timeout the time before giving up.
|
|
#
|
|
# If you run Squid on a dual-homed machine with an internal
|
|
# and an external interface we recommend you to specify the
|
|
# internal address:port in http_port. This way Squid will only be
|
|
# visible on the internal address.
|
|
#
|
|
#
|
|
|
|
# Squid normally listens to port 3128
|
|
http_port 3128
|
|
|
|
# TAG: https_port
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# Usage: [ip:]port cert=certificate.pem [key=key.pem] [mode] [options...]
|
|
#
|
|
# The socket address where Squid will listen for client requests made
|
|
# over TLS or SSL connections. Commonly referred to as HTTPS.
|
|
#
|
|
# This is most useful for situations where you are running squid in
|
|
# accelerator mode and you want to do the SSL work at the accelerator level.
|
|
#
|
|
# You may specify multiple socket addresses on multiple lines,
|
|
# each with their own SSL certificate and/or options.
|
|
#
|
|
# Modes:
|
|
#
|
|
# accel Accelerator / reverse proxy mode
|
|
#
|
|
# intercept Support for IP-Layer interception of
|
|
# outgoing requests without browser settings.
|
|
# NP: disables authentication and IPv6 on the port.
|
|
#
|
|
# tproxy Support Linux TPROXY for spoofing outgoing
|
|
# connections using the client IP address.
|
|
# NP: disables authentication and maybe IPv6 on the port.
|
|
#
|
|
# ssl-bump For each intercepted connection allowed by ssl_bump
|
|
# ACLs, establish a secure connection with the client and with
|
|
# the server, decrypt HTTPS messages as they pass through
|
|
# Squid, and treat them as unencrypted HTTP messages,
|
|
# becoming the man-in-the-middle.
|
|
#
|
|
# An "ssl_bump server-first" match is required to
|
|
# fully enable bumping of intercepted SSL connections.
|
|
#
|
|
# Requires tproxy or intercept.
|
|
#
|
|
# Omitting the mode flag causes default forward proxy mode to be used.
|
|
#
|
|
#
|
|
# See http_port for a list of generic options
|
|
#
|
|
#
|
|
# SSL Options:
|
|
#
|
|
# cert= Path to SSL certificate (PEM format).
|
|
#
|
|
# key= Path to SSL private key file (PEM format)
|
|
# if not specified, the certificate file is
|
|
# assumed to be a combined certificate and
|
|
# key file.
|
|
#
|
|
# version= The version of SSL/TLS supported
|
|
# 1 automatic (default)
|
|
# 2 SSLv2 only
|
|
# 3 SSLv3 only
|
|
# 4 TLSv1 only
|
|
#
|
|
# cipher= Colon separated list of supported ciphers.
|
|
#
|
|
# options= Various SSL engine options. The most important
|
|
# being:
|
|
# NO_SSLv2 Disallow the use of SSLv2
|
|
# NO_SSLv3 Disallow the use of SSLv3
|
|
# NO_TLSv1 Disallow the use of TLSv1
|
|
# SINGLE_DH_USE Always create a new key when using
|
|
# temporary/ephemeral DH key exchanges
|
|
# See src/ssl_support.c or OpenSSL SSL_CTX_set_options
|
|
# documentation for a complete list of options.
|
|
#
|
|
# clientca= File containing the list of CAs to use when
|
|
# requesting a client certificate.
|
|
#
|
|
# cafile= File containing additional CA certificates to
|
|
# use when verifying client certificates. If unset
|
|
# clientca will be used.
|
|
#
|
|
# capath= Directory containing additional CA certificates
|
|
# and CRL lists to use when verifying client certificates.
|
|
#
|
|
# crlfile= File of additional CRL lists to use when verifying
|
|
# the client certificate, in addition to CRLs stored in
|
|
# the capath. Implies VERIFY_CRL flag below.
|
|
#
|
|
# dhparams= File containing DH parameters for temporary/ephemeral
|
|
# DH key exchanges.
|
|
#
|
|
# sslflags= Various flags modifying the use of SSL:
|
|
# DELAYED_AUTH
|
|
# Don't request client certificates
|
|
# immediately, but wait until acl processing
|
|
# requires a certificate (not yet implemented).
|
|
# NO_DEFAULT_CA
|
|
# Don't use the default CA lists built in
|
|
# to OpenSSL.
|
|
# NO_SESSION_REUSE
|
|
# Don't allow for session reuse. Each connection
|
|
# will result in a new SSL session.
|
|
# VERIFY_CRL
|
|
# Verify CRL lists when accepting client
|
|
# certificates.
|
|
# VERIFY_CRL_ALL
|
|
# Verify CRL lists for all certificates in the
|
|
# client certificate chain.
|
|
#
|
|
# sslcontext= SSL session ID context identifier.
|
|
#
|
|
# generate-host-certificates[=<on|off>]
|
|
# Dynamically create SSL server certificates for the
|
|
# destination hosts of bumped SSL requests.When
|
|
# enabled, the cert and key options are used to sign
|
|
# generated certificates. Otherwise generated
|
|
# certificate will be selfsigned.
|
|
# If there is CA certificate life time of generated
|
|
# certificate equals lifetime of CA certificate. If
|
|
# generated certificate is selfsigned lifetime is three
|
|
# years.
|
|
# This option is enabled by default when SslBump is used.
|
|
# See the sslBump option above for more information.
|
|
#
|
|
# dynamic_cert_mem_cache_size=SIZE
|
|
# Approximate total RAM size spent on cached generated
|
|
# certificates. If set to zero, caching is disabled. The
|
|
# default value is 4MB.
|
|
#
|
|
# See http_port for a list of available options.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: tcp_outgoing_tos
|
|
# Allows you to select a TOS/Diffserv value for packets outgoing
|
|
# on the server side, based on an ACL.
|
|
#
|
|
# tcp_outgoing_tos ds-field [!]aclname ...
|
|
#
|
|
# Example where normal_service_net uses the TOS value 0x00
|
|
# and good_service_net uses 0x20
|
|
#
|
|
# acl normal_service_net src 10.0.0.0/24
|
|
# acl good_service_net src 10.0.1.0/24
|
|
# tcp_outgoing_tos 0x00 normal_service_net
|
|
# tcp_outgoing_tos 0x20 good_service_net
|
|
#
|
|
# TOS/DSCP values really only have local significance - so you should
|
|
# know what you're specifying. For more information, see RFC2474,
|
|
# RFC2475, and RFC3260.
|
|
#
|
|
# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or
|
|
# "default" to use whatever default your host has. Note that in
|
|
# practice often only multiples of 4 is usable as the two rightmost bits
|
|
# have been redefined for use by ECN (RFC 3168 section 23.1).
|
|
#
|
|
# Processing proceeds in the order specified, and stops at first fully
|
|
# matching line.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: clientside_tos
|
|
# Allows you to select a TOS/Diffserv value for packets being transmitted
|
|
# on the client-side, based on an ACL.
|
|
#
|
|
# clientside_tos ds-field [!]aclname ...
|
|
#
|
|
# Example where normal_service_net uses the TOS value 0x00
|
|
# and good_service_net uses 0x20
|
|
#
|
|
# acl normal_service_net src 10.0.0.0/24
|
|
# acl good_service_net src 10.0.1.0/24
|
|
# clientside_tos 0x00 normal_service_net
|
|
# clientside_tos 0x20 good_service_net
|
|
#
|
|
# Note: This feature is incompatible with qos_flows. Any TOS values set here
|
|
# will be overwritten by TOS values in qos_flows.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: tcp_outgoing_mark
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# Packet MARK (Linux)
|
|
#
|
|
# Allows you to apply a Netfilter mark value to outgoing packets
|
|
# on the server side, based on an ACL.
|
|
#
|
|
# tcp_outgoing_mark mark-value [!]aclname ...
|
|
#
|
|
# Example where normal_service_net uses the mark value 0x00
|
|
# and good_service_net uses 0x20
|
|
#
|
|
# acl normal_service_net src 10.0.0.0/24
|
|
# acl good_service_net src 10.0.1.0/24
|
|
# tcp_outgoing_mark 0x00 normal_service_net
|
|
# tcp_outgoing_mark 0x20 good_service_net
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: clientside_mark
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# Packet MARK (Linux)
|
|
#
|
|
# Allows you to apply a Netfilter mark value to packets being transmitted
|
|
# on the client-side, based on an ACL.
|
|
#
|
|
# clientside_mark mark-value [!]aclname ...
|
|
#
|
|
# Example where normal_service_net uses the mark value 0x00
|
|
# and good_service_net uses 0x20
|
|
#
|
|
# acl normal_service_net src 10.0.0.0/24
|
|
# acl good_service_net src 10.0.1.0/24
|
|
# clientside_mark 0x00 normal_service_net
|
|
# clientside_mark 0x20 good_service_net
|
|
#
|
|
# Note: This feature is incompatible with qos_flows. Any mark values set here
|
|
# will be overwritten by mark values in qos_flows.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: qos_flows
|
|
# Allows you to select a TOS/DSCP value to mark outgoing
|
|
# connections to the client, based on where the reply was sourced.
|
|
# For platforms using netfilter, allows you to set a netfilter mark
|
|
# value instead of, or in addition to, a TOS value.
|
|
#
|
|
# By default this functionality is disabled. To enable it with the default
|
|
# settings simply use "qos_flows mark" or "qos_flows tos". Default
|
|
# settings will result in the netfilter mark or TOS value being copied
|
|
# from the upstream connection to the client. Note that it is the connection
|
|
# CONNMARK value not the packet MARK value that is copied.
|
|
#
|
|
# It is not currently possible to copy the mark or TOS value from the
|
|
# client to the upstream connection request.
|
|
#
|
|
# TOS values really only have local significance - so you should
|
|
# know what you're specifying. For more information, see RFC2474,
|
|
# RFC2475, and RFC3260.
|
|
#
|
|
# The TOS/DSCP byte must be exactly that - a octet value 0 - 255. Note that
|
|
# in practice often only multiples of 4 is usable as the two rightmost bits
|
|
# have been redefined for use by ECN (RFC 3168 section 23.1).
|
|
#
|
|
# Mark values can be any unsigned 32-bit integer value.
|
|
#
|
|
# This setting is configured by setting the following values:
|
|
#
|
|
# tos|mark Whether to set TOS or netfilter mark values
|
|
#
|
|
# local-hit=0xFF Value to mark local cache hits.
|
|
#
|
|
# sibling-hit=0xFF Value to mark hits from sibling peers.
|
|
#
|
|
# parent-hit=0xFF Value to mark hits from parent peers.
|
|
#
|
|
# miss=0xFF[/mask] Value to mark cache misses. Takes precedence
|
|
# over the preserve-miss feature (see below), unless
|
|
# mask is specified, in which case only the bits
|
|
# specified in the mask are written.
|
|
#
|
|
# The TOS variant of the following features are only possible on Linux
|
|
# and require your kernel to be patched with the TOS preserving ZPH
|
|
# patch, available from http://zph.bratcheda.org
|
|
# No patch is needed to preserve the netfilter mark, which will work
|
|
# with all variants of netfilter.
|
|
#
|
|
# disable-preserve-miss
|
|
# This option disables the preservation of the TOS or netfilter
|
|
# mark. By default, the existing TOS or netfilter mark value of
|
|
# the response coming from the remote server will be retained
|
|
# and masked with miss-mark.
|
|
# NOTE: in the case of a netfilter mark, the mark must be set on
|
|
# the connection (using the CONNMARK target) not on the packet
|
|
# (MARK target).
|
|
#
|
|
# miss-mask=0xFF
|
|
# Allows you to mask certain bits in the TOS or mark value
|
|
# received from the remote server, before copying the value to
|
|
# the TOS sent towards clients.
|
|
# Default for tos: 0xFF (TOS from server is not changed).
|
|
# Default for mark: 0xFFFFFFFF (mark from server is not changed).
|
|
#
|
|
# All of these features require the --enable-zph-qos compilation flag
|
|
# (enabled by default). Netfilter marking also requires the
|
|
# libnetfilter_conntrack libraries (--with-netfilter-conntrack) and
|
|
# libcap 2.09+ (--with-libcap).
|
|
#
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: tcp_outgoing_address
|
|
# Allows you to map requests to different outgoing IP addresses
|
|
# based on the username or source address of the user making
|
|
# the request.
|
|
#
|
|
# tcp_outgoing_address ipaddr [[!]aclname] ...
|
|
#
|
|
# For example;
|
|
# Forwarding clients with dedicated IPs for certain subnets.
|
|
#
|
|
# acl normal_service_net src 10.0.0.0/24
|
|
# acl good_service_net src 10.0.2.0/24
|
|
#
|
|
# tcp_outgoing_address 2001:db8::c001 good_service_net
|
|
# tcp_outgoing_address 10.1.0.2 good_service_net
|
|
#
|
|
# tcp_outgoing_address 2001:db8::beef normal_service_net
|
|
# tcp_outgoing_address 10.1.0.1 normal_service_net
|
|
#
|
|
# tcp_outgoing_address 2001:db8::1
|
|
# tcp_outgoing_address 10.1.0.3
|
|
#
|
|
# Processing proceeds in the order specified, and stops at first fully
|
|
# matching line.
|
|
#
|
|
# Squid will add an implicit IP version test to each line.
|
|
# Requests going to IPv4 websites will use the outgoing 10.1.0.* addresses.
|
|
# Requests going to IPv6 websites will use the outgoing 2001:db8:* addresses.
|
|
#
|
|
#
|
|
# NOTE: The use of this directive using client dependent ACLs is
|
|
# incompatible with the use of server side persistent connections. To
|
|
# ensure correct results it is best to set server_persistent_connections
|
|
# to off when using this directive in such configurations.
|
|
#
|
|
# NOTE: The use of this directive to set a local IP on outgoing TCP links
|
|
# is incompatible with using TPROXY to set client IP out outbound TCP links.
|
|
# When needing to contact peers use the no-tproxy cache_peer option and the
|
|
# client_dst_passthru directive re-enable normal forwarding such as this.
|
|
#
|
|
#Default:
|
|
# Address selection is performed by the operating system.
|
|
|
|
# TAG: host_verify_strict
|
|
# Regardless of this option setting, when dealing with intercepted
|
|
# traffic, Squid always verifies that the destination IP address matches
|
|
# the Host header domain or IP (called 'authority form URL').
|
|
#
|
|
# This enforcement is performed to satisfy a MUST-level requirement in
|
|
# RFC 2616 section 14.23: "The Host field value MUST represent the naming
|
|
# authority of the origin server or gateway given by the original URL".
|
|
#
|
|
# When set to ON:
|
|
# Squid always responds with an HTTP 409 (Conflict) error
|
|
# page and logs a security warning if there is no match.
|
|
#
|
|
# Squid verifies that the destination IP address matches
|
|
# the Host header for forward-proxy and reverse-proxy traffic
|
|
# as well. For those traffic types, Squid also enables the
|
|
# following checks, comparing the corresponding Host header
|
|
# and Request-URI components:
|
|
#
|
|
# * The host names (domain or IP) must be identical,
|
|
# but valueless or missing Host header disables all checks.
|
|
# For the two host names to match, both must be either IP
|
|
# or FQDN.
|
|
#
|
|
# * Port numbers must be identical, but if a port is missing
|
|
# the scheme-default port is assumed.
|
|
#
|
|
#
|
|
# When set to OFF (the default):
|
|
# Squid allows suspicious requests to continue but logs a
|
|
# security warning and blocks caching of the response.
|
|
#
|
|
# * Forward-proxy traffic is not checked at all.
|
|
#
|
|
# * Reverse-proxy traffic is not checked at all.
|
|
#
|
|
# * Intercepted traffic which passes verification is handled
|
|
# according to client_dst_passthru.
|
|
#
|
|
# * Intercepted requests which fail verification are sent
|
|
# to the client original destination instead of DIRECT.
|
|
# This overrides 'client_dst_passthru off'.
|
|
#
|
|
# For now suspicious intercepted CONNECT requests are always
|
|
# responded to with an HTTP 409 (Conflict) error page.
|
|
#
|
|
#
|
|
# SECURITY NOTE:
|
|
#
|
|
# As described in CVE-2009-0801 when the Host: header alone is used
|
|
# to determine the destination of a request it becomes trivial for
|
|
# malicious scripts on remote websites to bypass browser same-origin
|
|
# security policy and sandboxing protections.
|
|
#
|
|
# The cause of this is that such applets are allowed to perform their
|
|
# own HTTP stack, in which case the same-origin policy of the browser
|
|
# sandbox only verifies that the applet tries to contact the same IP
|
|
# as from where it was loaded at the IP level. The Host: header may
|
|
# be different from the connected IP and approved origin.
|
|
#
|
|
#Default:
|
|
# host_verify_strict off
|
|
|
|
# TAG: client_dst_passthru
|
|
# With NAT or TPROXY intercepted traffic Squid may pass the request
|
|
# directly to the original client destination IP or seek a faster
|
|
# source using the HTTP Host header.
|
|
#
|
|
# Using Host to locate alternative servers can provide faster
|
|
# connectivity with a range of failure recovery options.
|
|
# But can also lead to connectivity trouble when the client and
|
|
# server are attempting stateful interactions unaware of the proxy.
|
|
#
|
|
# This option (on by default) prevents alternative DNS entries being
|
|
# located to send intercepted traffic DIRECT to an origin server.
|
|
# The clients original destination IP and port will be used instead.
|
|
#
|
|
# Regardless of this option setting, when dealing with intercepted
|
|
# traffic Squid will verify the Host: header and any traffic which
|
|
# fails Host verification will be treated as if this option were ON.
|
|
#
|
|
# see host_verify_strict for details on the verification process.
|
|
#Default:
|
|
# client_dst_passthru on
|
|
|
|
# SSL OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: ssl_unclean_shutdown
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# Some browsers (especially MSIE) bugs out on SSL shutdown
|
|
# messages.
|
|
#Default:
|
|
# ssl_unclean_shutdown off
|
|
|
|
# TAG: ssl_engine
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# The OpenSSL engine to use. You will need to set this if you
|
|
# would like to use hardware SSL acceleration for example.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslproxy_client_certificate
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# Client SSL Certificate to use when proxying https:// URLs
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslproxy_client_key
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# Client SSL Key to use when proxying https:// URLs
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslproxy_version
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# SSL version level to use when proxying https:// URLs
|
|
#
|
|
# The versions of SSL/TLS supported:
|
|
#
|
|
# 1 automatic (default)
|
|
# 2 SSLv2 only
|
|
# 3 SSLv3 only
|
|
# 4 TLSv1.0 only
|
|
# 5 TLSv1.1 only
|
|
# 6 TLSv1.2 only
|
|
#Default:
|
|
# automatic SSL/TLS version negotiation
|
|
|
|
# TAG: sslproxy_options
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# SSL implementation options to use when proxying https:// URLs
|
|
#
|
|
# The most important being:
|
|
#
|
|
# NO_SSLv2 Disallow the use of SSLv2
|
|
# NO_SSLv3 Disallow the use of SSLv3
|
|
# NO_TLSv1 Disallow the use of TLSv1.0
|
|
# NO_TLSv1_1 Disallow the use of TLSv1.1
|
|
# NO_TLSv1_2 Disallow the use of TLSv1.2
|
|
# SINGLE_DH_USE
|
|
# Always create a new key when using temporary/ephemeral
|
|
# DH key exchanges
|
|
# SSL_OP_NO_TICKET
|
|
# Disable use of RFC5077 session tickets. Some servers
|
|
# may have problems understanding the TLS extension due
|
|
# to ambiguous specification in RFC4507.
|
|
# ALL Enable various bug workarounds suggested as "harmless"
|
|
# by OpenSSL. Be warned that this may reduce SSL/TLS
|
|
# strength to some attacks.
|
|
#
|
|
# See the OpenSSL SSL_CTX_set_options documentation for a
|
|
# complete list of possible options.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslproxy_cipher
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# SSL cipher list to use when proxying https:// URLs
|
|
#
|
|
# Colon separated list of supported ciphers.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslproxy_cafile
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# file containing CA certificates to use when verifying server
|
|
# certificates while proxying https:// URLs
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslproxy_capath
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# directory containing CA certificates to use when verifying
|
|
# server certificates while proxying https:// URLs
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: ssl_bump
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# This option is consulted when a CONNECT request is received on
|
|
# an http_port (or a new connection is intercepted at an
|
|
# https_port), provided that port was configured with an ssl-bump
|
|
# flag. The subsequent data on the connection is either treated as
|
|
# HTTPS and decrypted OR tunneled at TCP level without decryption,
|
|
# depending on the first bumping "mode" which ACLs match.
|
|
#
|
|
# ssl_bump <mode> [!]acl ...
|
|
#
|
|
# The following bumping modes are supported:
|
|
#
|
|
# client-first
|
|
# Allow bumping of the connection. Establish a secure connection
|
|
# with the client first, then connect to the server. This old mode
|
|
# does not allow Squid to mimic server SSL certificate and does
|
|
# not work with intercepted SSL connections.
|
|
#
|
|
# server-first
|
|
# Allow bumping of the connection. Establish a secure connection
|
|
# with the server first, then establish a secure connection with
|
|
# the client, using a mimicked server certificate. Works with both
|
|
# CONNECT requests and intercepted SSL connections.
|
|
#
|
|
# none
|
|
# Become a TCP tunnel without decoding the connection.
|
|
# Works with both CONNECT requests and intercepted SSL
|
|
# connections. This is the default behavior when no
|
|
# ssl_bump option is given or no ssl_bump ACLs match.
|
|
#
|
|
# By default, no connections are bumped.
|
|
#
|
|
# The first matching ssl_bump option wins. If no ACLs match, the
|
|
# connection is not bumped. Unlike most allow/deny ACL lists, ssl_bump
|
|
# does not have an implicit "negate the last given option" rule. You
|
|
# must make that rule explicit if you convert old ssl_bump allow/deny
|
|
# rules that rely on such an implicit rule.
|
|
#
|
|
# This clause supports both fast and slow acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
# See also: http_port ssl-bump, https_port ssl-bump
|
|
#
|
|
#
|
|
# # Example: Bump all requests except those originating from
|
|
# # localhost or those going to example.com.
|
|
#
|
|
# acl broken_sites dstdomain .example.com
|
|
# ssl_bump none localhost
|
|
# ssl_bump none broken_sites
|
|
# ssl_bump server-first all
|
|
#Default:
|
|
# Does not bump unless rules are present in squid.conf
|
|
|
|
# TAG: sslproxy_flags
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# Various flags modifying the use of SSL while proxying https:// URLs:
|
|
# DONT_VERIFY_PEER Accept certificates that fail verification.
|
|
# For refined control, see sslproxy_cert_error.
|
|
# NO_DEFAULT_CA Don't use the default CA list built in
|
|
# to OpenSSL.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslproxy_cert_error
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# Use this ACL to bypass server certificate validation errors.
|
|
#
|
|
# For example, the following lines will bypass all validation errors
|
|
# when talking to servers for example.com. All other
|
|
# validation errors will result in ERR_SECURE_CONNECT_FAIL error.
|
|
#
|
|
# acl BrokenButTrustedServers dstdomain example.com
|
|
# sslproxy_cert_error allow BrokenButTrustedServers
|
|
# sslproxy_cert_error deny all
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
# Using slow acl types may result in server crashes
|
|
#
|
|
# Without this option, all server certificate validation errors
|
|
# terminate the transaction to protect Squid and the client.
|
|
#
|
|
# SQUID_X509_V_ERR_INFINITE_VALIDATION error cannot be bypassed
|
|
# but should not happen unless your OpenSSL library is buggy.
|
|
#
|
|
# SECURITY WARNING:
|
|
# Bypassing validation errors is dangerous because an
|
|
# error usually implies that the server cannot be trusted
|
|
# and the connection may be insecure.
|
|
#
|
|
# See also: sslproxy_flags and DONT_VERIFY_PEER.
|
|
#Default:
|
|
# Server certificate errors terminate the transaction.
|
|
|
|
# TAG: sslproxy_cert_sign
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
#
|
|
# sslproxy_cert_sign <signing algorithm> acl ...
|
|
#
|
|
# The following certificate signing algorithms are supported:
|
|
#
|
|
# signTrusted
|
|
# Sign using the configured CA certificate which is usually
|
|
# placed in and trusted by end-user browsers. This is the
|
|
# default for trusted origin server certificates.
|
|
#
|
|
# signUntrusted
|
|
# Sign to guarantee an X509_V_ERR_CERT_UNTRUSTED browser error.
|
|
# This is the default for untrusted origin server certificates
|
|
# that are not self-signed (see ssl::certUntrusted).
|
|
#
|
|
# signSelf
|
|
# Sign using a self-signed certificate with the right CN to
|
|
# generate a X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT error in the
|
|
# browser. This is the default for self-signed origin server
|
|
# certificates (see ssl::certSelfSigned).
|
|
#
|
|
# This clause only supports fast acl types.
|
|
#
|
|
# When sslproxy_cert_sign acl(s) match, Squid uses the corresponding
|
|
# signing algorithm to generate the certificate and ignores all
|
|
# subsequent sslproxy_cert_sign options (the first match wins). If no
|
|
# acl(s) match, the default signing algorithm is determined by errors
|
|
# detected when obtaining and validating the origin server certificate.
|
|
#
|
|
# WARNING: SQUID_X509_V_ERR_DOMAIN_MISMATCH and ssl:certDomainMismatch can
|
|
# be used with sslproxy_cert_adapt, but if and only if Squid is bumping a
|
|
# CONNECT request that carries a domain name. In all other cases (CONNECT
|
|
# to an IP address or an intercepted SSL connection), Squid cannot detect
|
|
# the domain mismatch at certificate generation time when
|
|
# bump-server-first is used.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslproxy_cert_adapt
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
#
|
|
# sslproxy_cert_adapt <adaptation algorithm> acl ...
|
|
#
|
|
# The following certificate adaptation algorithms are supported:
|
|
#
|
|
# setValidAfter
|
|
# Sets the "Not After" property to the "Not After" property of
|
|
# the CA certificate used to sign generated certificates.
|
|
#
|
|
# setValidBefore
|
|
# Sets the "Not Before" property to the "Not Before" property of
|
|
# the CA certificate used to sign generated certificates.
|
|
#
|
|
# setCommonName or setCommonName{CN}
|
|
# Sets Subject.CN property to the host name specified as a
|
|
# CN parameter or, if no explicit CN parameter was specified,
|
|
# extracted from the CONNECT request. It is a misconfiguration
|
|
# to use setCommonName without an explicit parameter for
|
|
# intercepted or tproxied SSL connections.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
#
|
|
# Squid first groups sslproxy_cert_adapt options by adaptation algorithm.
|
|
# Within a group, when sslproxy_cert_adapt acl(s) match, Squid uses the
|
|
# corresponding adaptation algorithm to generate the certificate and
|
|
# ignores all subsequent sslproxy_cert_adapt options in that algorithm's
|
|
# group (i.e., the first match wins within each algorithm group). If no
|
|
# acl(s) match, the default mimicking action takes place.
|
|
#
|
|
# WARNING: SQUID_X509_V_ERR_DOMAIN_MISMATCH and ssl:certDomainMismatch can
|
|
# be used with sslproxy_cert_adapt, but if and only if Squid is bumping a
|
|
# CONNECT request that carries a domain name. In all other cases (CONNECT
|
|
# to an IP address or an intercepted SSL connection), Squid cannot detect
|
|
# the domain mismatch at certificate generation time when
|
|
# bump-server-first is used.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslpassword_program
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# Specify a program used for entering SSL key passphrases
|
|
# when using encrypted SSL certificate keys. If not specified
|
|
# keys must either be unencrypted, or Squid started with the -N
|
|
# option to allow it to query interactively for the passphrase.
|
|
#
|
|
# The key file name is given as argument to the program allowing
|
|
# selection of the right password if you have multiple encrypted
|
|
# keys.
|
|
#Default:
|
|
# none
|
|
|
|
# OPTIONS RELATING TO EXTERNAL SSL_CRTD
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: sslcrtd_program
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl-crtd
|
|
#
|
|
# Specify the location and options of the executable for ssl_crtd process.
|
|
# /usr/libexec/ssl_crtd program requires -s and -M parameters
|
|
# For more information use:
|
|
# /usr/libexec/ssl_crtd -h
|
|
#Default:
|
|
# sslcrtd_program /usr/libexec/ssl_crtd -s /var/log/squid/lib/ssl_db -M 4MB
|
|
|
|
# TAG: sslcrtd_children
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl-crtd
|
|
#
|
|
# The maximum number of processes spawn to service ssl server.
|
|
# The maximum this may be safely set to is 32.
|
|
#
|
|
# The startup= and idle= options allow some measure of skew in your
|
|
# tuning.
|
|
#
|
|
# startup=N
|
|
#
|
|
# Sets the minimum number of processes to spawn when Squid
|
|
# starts or reconfigures. When set to zero the first request will
|
|
# cause spawning of the first child process to handle it.
|
|
#
|
|
# Starting too few children temporary slows Squid under load while it
|
|
# tries to spawn enough additional processes to cope with traffic.
|
|
#
|
|
# idle=N
|
|
#
|
|
# Sets a minimum of how many processes Squid is to try and keep available
|
|
# at all times. When traffic begins to rise above what the existing
|
|
# processes can handle this many more will be spawned up to the maximum
|
|
# configured. A minimum setting of 1 is required.
|
|
#
|
|
# You must have at least one ssl_crtd process.
|
|
#Default:
|
|
# sslcrtd_children 32 startup=5 idle=1
|
|
|
|
# TAG: sslcrtvalidator_program
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# Specify the location and options of the executable for ssl_crt_validator
|
|
# process.
|
|
#
|
|
# Usage: sslcrtvalidator_program [ttl=n] [cache=n] path ...
|
|
#
|
|
# Options:
|
|
# ttl=n TTL in seconds for cached results. The default is 60 secs
|
|
# cache=n limit the result cache size. The default value is 2048
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: sslcrtvalidator_children
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ssl
|
|
#
|
|
# The maximum number of processes spawn to service SSL server.
|
|
# The maximum this may be safely set to is 32.
|
|
#
|
|
# The startup= and idle= options allow some measure of skew in your
|
|
# tuning.
|
|
#
|
|
# startup=N
|
|
#
|
|
# Sets the minimum number of processes to spawn when Squid
|
|
# starts or reconfigures. When set to zero the first request will
|
|
# cause spawning of the first child process to handle it.
|
|
#
|
|
# Starting too few children temporary slows Squid under load while it
|
|
# tries to spawn enough additional processes to cope with traffic.
|
|
#
|
|
# idle=N
|
|
#
|
|
# Sets a minimum of how many processes Squid is to try and keep available
|
|
# at all times. When traffic begins to rise above what the existing
|
|
# processes can handle this many more will be spawned up to the maximum
|
|
# configured. A minimum setting of 1 is required.
|
|
#
|
|
# concurrency=
|
|
#
|
|
# The number of requests each certificate validator helper can handle in
|
|
# parallel. A value of 0 indicates the certficate validator does not
|
|
# support concurrency. Defaults to 1.
|
|
#
|
|
# When this directive is set to a value >= 1 then the protocol
|
|
# used to communicate with the helper is modified to include
|
|
# a request ID in front of the request/response. The request
|
|
# ID from the request must be echoed back with the response
|
|
# to that request.
|
|
#
|
|
# You must have at least one ssl_crt_validator process.
|
|
#Default:
|
|
# sslcrtvalidator_children 32 startup=5 idle=1 concurrency=1
|
|
|
|
# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: cache_peer
|
|
# To specify other caches in a hierarchy, use the format:
|
|
#
|
|
# cache_peer hostname type http-port icp-port [options]
|
|
#
|
|
# For example,
|
|
#
|
|
# # proxy icp
|
|
# # hostname type port port options
|
|
# # -------------------- -------- ----- ----- -----------
|
|
# cache_peer parent.foo.net parent 3128 3130 default
|
|
# cache_peer sib1.foo.net sibling 3128 3130 proxy-only
|
|
# cache_peer sib2.foo.net sibling 3128 3130 proxy-only
|
|
# cache_peer example.com parent 80 0 default
|
|
# cache_peer cdn.example.com sibling 3128 0
|
|
#
|
|
# type: either 'parent', 'sibling', or 'multicast'.
|
|
#
|
|
# proxy-port: The port number where the peer accept HTTP requests.
|
|
# For other Squid proxies this is usually 3128
|
|
# For web servers this is usually 80
|
|
#
|
|
# icp-port: Used for querying neighbor caches about objects.
|
|
# Set to 0 if the peer does not support ICP or HTCP.
|
|
# See ICP and HTCP options below for additional details.
|
|
#
|
|
#
|
|
# ==== ICP OPTIONS ====
|
|
#
|
|
# You MUST also set icp_port and icp_access explicitly when using these options.
|
|
# The defaults will prevent peer traffic using ICP.
|
|
#
|
|
#
|
|
# no-query Disable ICP queries to this neighbor.
|
|
#
|
|
# multicast-responder
|
|
# Indicates the named peer is a member of a multicast group.
|
|
# ICP queries will not be sent directly to the peer, but ICP
|
|
# replies will be accepted from it.
|
|
#
|
|
# closest-only Indicates that, for ICP_OP_MISS replies, we'll only forward
|
|
# CLOSEST_PARENT_MISSes and never FIRST_PARENT_MISSes.
|
|
#
|
|
# background-ping
|
|
# To only send ICP queries to this neighbor infrequently.
|
|
# This is used to keep the neighbor round trip time updated
|
|
# and is usually used in conjunction with weighted-round-robin.
|
|
#
|
|
#
|
|
# ==== HTCP OPTIONS ====
|
|
#
|
|
# You MUST also set htcp_port and htcp_access explicitly when using these options.
|
|
# The defaults will prevent peer traffic using HTCP.
|
|
#
|
|
#
|
|
# htcp Send HTCP, instead of ICP, queries to the neighbor.
|
|
# You probably also want to set the "icp-port" to 4827
|
|
# instead of 3130. This directive accepts a comma separated
|
|
# list of options described below.
|
|
#
|
|
# htcp=oldsquid Send HTCP to old Squid versions (2.5 or earlier).
|
|
#
|
|
# htcp=no-clr Send HTCP to the neighbor but without
|
|
# sending any CLR requests. This cannot be used with
|
|
# only-clr.
|
|
#
|
|
# htcp=only-clr Send HTCP to the neighbor but ONLY CLR requests.
|
|
# This cannot be used with no-clr.
|
|
#
|
|
# htcp=no-purge-clr
|
|
# Send HTCP to the neighbor including CLRs but only when
|
|
# they do not result from PURGE requests.
|
|
#
|
|
# htcp=forward-clr
|
|
# Forward any HTCP CLR requests this proxy receives to the peer.
|
|
#
|
|
#
|
|
# ==== PEER SELECTION METHODS ====
|
|
#
|
|
# The default peer selection method is ICP, with the first responding peer
|
|
# being used as source. These options can be used for better load balancing.
|
|
#
|
|
#
|
|
# default This is a parent cache which can be used as a "last-resort"
|
|
# if a peer cannot be located by any of the peer-selection methods.
|
|
# If specified more than once, only the first is used.
|
|
#
|
|
# round-robin Load-Balance parents which should be used in a round-robin
|
|
# fashion in the absence of any ICP queries.
|
|
# weight=N can be used to add bias.
|
|
#
|
|
# weighted-round-robin
|
|
# Load-Balance parents which should be used in a round-robin
|
|
# fashion with the frequency of each parent being based on the
|
|
# round trip time. Closer parents are used more often.
|
|
# Usually used for background-ping parents.
|
|
# weight=N can be used to add bias.
|
|
#
|
|
# carp Load-Balance parents which should be used as a CARP array.
|
|
# The requests will be distributed among the parents based on the
|
|
# CARP load balancing hash function based on their weight.
|
|
#
|
|
# userhash Load-balance parents based on the client proxy_auth or ident username.
|
|
#
|
|
# sourcehash Load-balance parents based on the client source IP.
|
|
#
|
|
# multicast-siblings
|
|
# To be used only for cache peers of type "multicast".
|
|
# ALL members of this multicast group have "sibling"
|
|
# relationship with it, not "parent". This is to a multicast
|
|
# group when the requested object would be fetched only from
|
|
# a "parent" cache, anyway. It's useful, e.g., when
|
|
# configuring a pool of redundant Squid proxies, being
|
|
# members of the same multicast group.
|
|
#
|
|
#
|
|
# ==== PEER SELECTION OPTIONS ====
|
|
#
|
|
# weight=N use to affect the selection of a peer during any weighted
|
|
# peer-selection mechanisms.
|
|
# The weight must be an integer; default is 1,
|
|
# larger weights are favored more.
|
|
# This option does not affect parent selection if a peering
|
|
# protocol is not in use.
|
|
#
|
|
# basetime=N Specify a base amount to be subtracted from round trip
|
|
# times of parents.
|
|
# It is subtracted before division by weight in calculating
|
|
# which parent to fectch from. If the rtt is less than the
|
|
# base time the rtt is set to a minimal value.
|
|
#
|
|
# ttl=N Specify a TTL to use when sending multicast ICP queries
|
|
# to this address.
|
|
# Only useful when sending to a multicast group.
|
|
# Because we don't accept ICP replies from random
|
|
# hosts, you must configure other group members as
|
|
# peers with the 'multicast-responder' option.
|
|
#
|
|
# no-delay To prevent access to this neighbor from influencing the
|
|
# delay pools.
|
|
#
|
|
# digest-url=URL Tell Squid to fetch the cache digest (if digests are
|
|
# enabled) for this host from the specified URL rather
|
|
# than the Squid default location.
|
|
#
|
|
#
|
|
# ==== CARP OPTIONS ====
|
|
#
|
|
# carp-key=key-specification
|
|
# use a different key than the full URL to hash against the peer.
|
|
# the key-specification is a comma-separated list of the keywords
|
|
# scheme, host, port, path, params
|
|
# Order is not important.
|
|
#
|
|
# ==== ACCELERATOR / REVERSE-PROXY OPTIONS ====
|
|
#
|
|
# originserver Causes this parent to be contacted as an origin server.
|
|
# Meant to be used in accelerator setups when the peer
|
|
# is a web server.
|
|
#
|
|
# forceddomain=name
|
|
# Set the Host header of requests forwarded to this peer.
|
|
# Useful in accelerator setups where the server (peer)
|
|
# expects a certain domain name but clients may request
|
|
# others. ie example.com or www.example.com
|
|
#
|
|
# no-digest Disable request of cache digests.
|
|
#
|
|
# no-netdb-exchange
|
|
# Disables requesting ICMP RTT database (NetDB).
|
|
#
|
|
#
|
|
# ==== AUTHENTICATION OPTIONS ====
|
|
#
|
|
# login=user:password
|
|
# If this is a personal/workgroup proxy and your parent
|
|
# requires proxy authentication.
|
|
#
|
|
# Note: The string can include URL escapes (i.e. %20 for
|
|
# spaces). This also means % must be written as %%.
|
|
#
|
|
# login=PASSTHRU
|
|
# Send login details received from client to this peer.
|
|
# Both Proxy- and WWW-Authorization headers are passed
|
|
# without alteration to the peer.
|
|
# Authentication is not required by Squid for this to work.
|
|
#
|
|
# Note: This will pass any form of authentication but
|
|
# only Basic auth will work through a proxy unless the
|
|
# connection-auth options are also used.
|
|
#
|
|
# login=PASS Send login details received from client to this peer.
|
|
# Authentication is not required by this option.
|
|
#
|
|
# If there are no client-provided authentication headers
|
|
# to pass on, but username and password are available
|
|
# from an external ACL user= and password= result tags
|
|
# they may be sent instead.
|
|
#
|
|
# Note: To combine this with proxy_auth both proxies must
|
|
# share the same user database as HTTP only allows for
|
|
# a single login (one for proxy, one for origin server).
|
|
# Also be warned this will expose your users proxy
|
|
# password to the peer. USE WITH CAUTION
|
|
#
|
|
# login=*:password
|
|
# Send the username to the upstream cache, but with a
|
|
# fixed password. This is meant to be used when the peer
|
|
# is in another administrative domain, but it is still
|
|
# needed to identify each user.
|
|
# The star can optionally be followed by some extra
|
|
# information which is added to the username. This can
|
|
# be used to identify this proxy to the peer, similar to
|
|
# the login=username:password option above.
|
|
#
|
|
# login=NEGOTIATE
|
|
# If this is a personal/workgroup proxy and your parent
|
|
# requires a secure proxy authentication.
|
|
# The first principal from the default keytab or defined by
|
|
# the environment variable KRB5_KTNAME will be used.
|
|
#
|
|
# WARNING: The connection may transmit requests from multiple
|
|
# clients. Negotiate often assumes end-to-end authentication
|
|
# and a single-client. Which is not strictly true here.
|
|
#
|
|
# login=NEGOTIATE:principal_name
|
|
# If this is a personal/workgroup proxy and your parent
|
|
# requires a secure proxy authentication.
|
|
# The principal principal_name from the default keytab or
|
|
# defined by the environment variable KRB5_KTNAME will be
|
|
# used.
|
|
#
|
|
# WARNING: The connection may transmit requests from multiple
|
|
# clients. Negotiate often assumes end-to-end authentication
|
|
# and a single-client. Which is not strictly true here.
|
|
#
|
|
# connection-auth=on|off
|
|
# Tell Squid that this peer does or not support Microsoft
|
|
# connection oriented authentication, and any such
|
|
# challenges received from there should be ignored.
|
|
# Default is auto to automatically determine the status
|
|
# of the peer.
|
|
#
|
|
#
|
|
# ==== SSL / HTTPS / TLS OPTIONS ====
|
|
#
|
|
# ssl Encrypt connections to this peer with SSL/TLS.
|
|
#
|
|
# sslcert=/path/to/ssl/certificate
|
|
# A client SSL certificate to use when connecting to
|
|
# this peer.
|
|
#
|
|
# sslkey=/path/to/ssl/key
|
|
# The private SSL key corresponding to sslcert above.
|
|
# If 'sslkey' is not specified 'sslcert' is assumed to
|
|
# reference a combined file containing both the
|
|
# certificate and the key.
|
|
#
|
|
# sslversion=1|2|3|4|5|6
|
|
# The SSL version to use when connecting to this peer
|
|
# 1 = automatic (default)
|
|
# 2 = SSL v2 only
|
|
# 3 = SSL v3 only
|
|
# 4 = TLS v1.0 only
|
|
# 5 = TLS v1.1 only
|
|
# 6 = TLS v1.2 only
|
|
#
|
|
# sslcipher=... The list of valid SSL ciphers to use when connecting
|
|
# to this peer.
|
|
#
|
|
# ssloptions=... Specify various SSL implementation options:
|
|
#
|
|
# NO_SSLv2 Disallow the use of SSLv2
|
|
# NO_SSLv3 Disallow the use of SSLv3
|
|
# NO_TLSv1 Disallow the use of TLSv1.0
|
|
# NO_TLSv1_1 Disallow the use of TLSv1.1
|
|
# NO_TLSv1_2 Disallow the use of TLSv1.2
|
|
# SINGLE_DH_USE
|
|
# Always create a new key when using
|
|
# temporary/ephemeral DH key exchanges
|
|
# ALL Enable various bug workarounds
|
|
# suggested as "harmless" by OpenSSL
|
|
# Be warned that this reduces SSL/TLS
|
|
# strength to some attacks.
|
|
#
|
|
# See the OpenSSL SSL_CTX_set_options documentation for a
|
|
# more complete list.
|
|
#
|
|
# sslcafile=... A file containing additional CA certificates to use
|
|
# when verifying the peer certificate.
|
|
#
|
|
# sslcapath=... A directory containing additional CA certificates to
|
|
# use when verifying the peer certificate.
|
|
#
|
|
# sslcrlfile=... A certificate revocation list file to use when
|
|
# verifying the peer certificate.
|
|
#
|
|
# sslflags=... Specify various flags modifying the SSL implementation:
|
|
#
|
|
# DONT_VERIFY_PEER
|
|
# Accept certificates even if they fail to
|
|
# verify.
|
|
# NO_DEFAULT_CA
|
|
# Don't use the default CA list built in
|
|
# to OpenSSL.
|
|
# DONT_VERIFY_DOMAIN
|
|
# Don't verify the peer certificate
|
|
# matches the server name
|
|
#
|
|
# ssldomain= The peer name as advertised in it's certificate.
|
|
# Used for verifying the correctness of the received peer
|
|
# certificate. If not specified the peer hostname will be
|
|
# used.
|
|
#
|
|
# front-end-https
|
|
# Enable the "Front-End-Https: On" header needed when
|
|
# using Squid as a SSL frontend in front of Microsoft OWA.
|
|
# See MS KB document Q307347 for details on this header.
|
|
# If set to auto the header will only be added if the
|
|
# request is forwarded as a https:// URL.
|
|
#
|
|
#
|
|
# ==== GENERAL OPTIONS ====
|
|
#
|
|
# connect-timeout=N
|
|
# A peer-specific connect timeout.
|
|
# Also see the peer_connect_timeout directive.
|
|
#
|
|
# connect-fail-limit=N
|
|
# How many times connecting to a peer must fail before
|
|
# it is marked as down. Default is 10.
|
|
#
|
|
# allow-miss Disable Squid's use of only-if-cached when forwarding
|
|
# requests to siblings. This is primarily useful when
|
|
# icp_hit_stale is used by the sibling. To extensive use
|
|
# of this option may result in forwarding loops, and you
|
|
# should avoid having two-way peerings with this option.
|
|
# For example to deny peer usage on requests from peer
|
|
# by denying cache_peer_access if the source is a peer.
|
|
#
|
|
# max-conn=N Limit the amount of connections Squid may open to this
|
|
# peer. see also
|
|
#
|
|
# name=xxx Unique name for the peer.
|
|
# Required if you have multiple peers on the same host
|
|
# but different ports.
|
|
# This name can be used in cache_peer_access and similar
|
|
# directives to dentify the peer.
|
|
# Can be used by outgoing access controls through the
|
|
# peername ACL type.
|
|
#
|
|
# no-tproxy Do not use the client-spoof TPROXY support when forwarding
|
|
# requests to this peer. Use normal address selection instead.
|
|
# This overrides the spoof_client_ip ACL.
|
|
#
|
|
# proxy-only objects fetched from the peer will not be stored locally.
|
|
#
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: cache_peer_domain
|
|
# Use to limit the domains for which a neighbor cache will be
|
|
# queried.
|
|
#
|
|
# Usage:
|
|
# cache_peer_domain cache-host domain [domain ...]
|
|
# cache_peer_domain cache-host !domain
|
|
#
|
|
# For example, specifying
|
|
#
|
|
# cache_peer_domain parent.foo.net .edu
|
|
#
|
|
# has the effect such that UDP query packets are sent to
|
|
# 'bigserver' only when the requested object exists on a
|
|
# server in the .edu domain. Prefixing the domainname
|
|
# with '!' means the cache will be queried for objects
|
|
# NOT in that domain.
|
|
#
|
|
# NOTE: * Any number of domains may be given for a cache-host,
|
|
# either on the same or separate lines.
|
|
# * When multiple domains are given for a particular
|
|
# cache-host, the first matched domain is applied.
|
|
# * Cache hosts with no domain restrictions are queried
|
|
# for all requests.
|
|
# * There are no defaults.
|
|
# * There is also a 'cache_peer_access' tag in the ACL
|
|
# section.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: cache_peer_access
|
|
# Similar to 'cache_peer_domain' but provides more flexibility by
|
|
# using ACL elements.
|
|
#
|
|
# Usage:
|
|
# cache_peer_access cache-host allow|deny [!]aclname ...
|
|
#
|
|
# The syntax is identical to 'http_access' and the other lists of
|
|
# ACL elements. See the comments for 'http_access' below, or
|
|
# the Squid FAQ (http://wiki.squid-cache.org/SquidFaq/SquidAcl).
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: neighbor_type_domain
|
|
# Modify the cache_peer neighbor type when passing requests
|
|
# about specific domains to the peer.
|
|
#
|
|
# Usage:
|
|
# neighbor_type_domain neighbor parent|sibling domain domain ...
|
|
#
|
|
# For example:
|
|
# cache_peer foo.example.com parent 3128 3130
|
|
# neighbor_type_domain foo.example.com sibling .au .de
|
|
#
|
|
# The above configuration treats all requests to foo.example.com as a
|
|
# parent proxy unless the request is for a .au or .de ccTLD domain name.
|
|
#Default:
|
|
# The peer type from cache_peer directive is used for all requests to that peer.
|
|
|
|
# TAG: dead_peer_timeout (seconds)
|
|
# This controls how long Squid waits to declare a peer cache
|
|
# as "dead." If there are no ICP replies received in this
|
|
# amount of time, Squid will declare the peer dead and not
|
|
# expect to receive any further ICP replies. However, it
|
|
# continues to send ICP queries, and will mark the peer as
|
|
# alive upon receipt of the first subsequent ICP reply.
|
|
#
|
|
# This timeout also affects when Squid expects to receive ICP
|
|
# replies from peers. If more than 'dead_peer' seconds have
|
|
# passed since the last ICP reply was received, Squid will not
|
|
# expect to receive an ICP reply on the next query. Thus, if
|
|
# your time between requests is greater than this timeout, you
|
|
# will see a lot of requests sent DIRECT to origin servers
|
|
# instead of to your parents.
|
|
#Default:
|
|
# dead_peer_timeout 10 seconds
|
|
|
|
# TAG: forward_max_tries
|
|
# Controls how many different forward paths Squid will try
|
|
# before giving up. See also forward_timeout.
|
|
#
|
|
# NOTE: connect_retries (default: none) can make each of these
|
|
# possible forwarding paths be tried multiple times.
|
|
#Default:
|
|
# forward_max_tries 10
|
|
|
|
# TAG: hierarchy_stoplist
|
|
# A list of words which, if found in a URL, cause the object to
|
|
# be handled directly by this cache. In other words, use this
|
|
# to not query neighbor caches for certain objects. You may
|
|
# list this option multiple times.
|
|
#
|
|
# Example:
|
|
# hierarchy_stoplist cgi-bin ?
|
|
#
|
|
# Note: never_direct overrides this option.
|
|
#Default:
|
|
# none
|
|
|
|
# MEMORY CACHE OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: cache_mem (bytes)
|
|
# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE.
|
|
# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL
|
|
# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER
|
|
# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS.
|
|
#
|
|
# 'cache_mem' specifies the ideal amount of memory to be used
|
|
# for:
|
|
# * In-Transit objects
|
|
# * Hot Objects
|
|
# * Negative-Cached objects
|
|
#
|
|
# Data for these objects are stored in 4 KB blocks. This
|
|
# parameter specifies the ideal upper limit on the total size of
|
|
# 4 KB blocks allocated. In-Transit objects take the highest
|
|
# priority.
|
|
#
|
|
# In-transit objects have priority over the others. When
|
|
# additional space is needed for incoming data, negative-cached
|
|
# and hot objects will be released. In other words, the
|
|
# negative-cached and hot objects will fill up any unused space
|
|
# not needed for in-transit objects.
|
|
#
|
|
# If circumstances require, this limit will be exceeded.
|
|
# Specifically, if your incoming request rate requires more than
|
|
# 'cache_mem' of memory to hold in-transit objects, Squid will
|
|
# exceed this limit to satisfy the new requests. When the load
|
|
# decreases, blocks will be freed until the high-water mark is
|
|
# reached. Thereafter, blocks will be used to store hot
|
|
# objects.
|
|
#
|
|
# If shared memory caching is enabled, Squid does not use the shared
|
|
# cache space for in-transit objects, but they still consume as much
|
|
# local memory as they need. For more details about the shared memory
|
|
# cache, see memory_cache_shared.
|
|
#Default:
|
|
# cache_mem 256 MB
|
|
|
|
# TAG: maximum_object_size_in_memory (bytes)
|
|
# Objects greater than this size will not be attempted to kept in
|
|
# the memory cache. This should be set high enough to keep objects
|
|
# accessed frequently in memory to improve performance whilst low
|
|
# enough to keep larger objects from hoarding cache_mem.
|
|
#Default:
|
|
# maximum_object_size_in_memory 512 KB
|
|
|
|
# TAG: memory_cache_shared on|off
|
|
# Controls whether the memory cache is shared among SMP workers.
|
|
#
|
|
# The shared memory cache is meant to occupy cache_mem bytes and replace
|
|
# the non-shared memory cache, although some entities may still be
|
|
# cached locally by workers for now (e.g., internal and in-transit
|
|
# objects may be served from a local memory cache even if shared memory
|
|
# caching is enabled).
|
|
#
|
|
# By default, the memory cache is shared if and only if all of the
|
|
# following conditions are satisfied: Squid runs in SMP mode with
|
|
# multiple workers, cache_mem is positive, and Squid environment
|
|
# supports required IPC primitives (e.g., POSIX shared memory segments
|
|
# and GCC-style atomic operations).
|
|
#
|
|
# To avoid blocking locks, shared memory uses opportunistic algorithms
|
|
# that do not guarantee that every cachable entity that could have been
|
|
# shared among SMP workers will actually be shared.
|
|
#
|
|
# Currently, entities exceeding 32KB in size cannot be shared.
|
|
#Default:
|
|
# "on" where supported if doing memory caching with multiple SMP workers.
|
|
|
|
# TAG: memory_cache_mode
|
|
# Controls which objects to keep in the memory cache (cache_mem)
|
|
#
|
|
# always Keep most recently fetched objects in memory (default)
|
|
#
|
|
# disk Only disk cache hits are kept in memory, which means
|
|
# an object must first be cached on disk and then hit
|
|
# a second time before cached in memory.
|
|
#
|
|
# network Only objects fetched from network is kept in memory
|
|
#Default:
|
|
# Keep the most recently fetched objects in memory
|
|
|
|
# TAG: memory_replacement_policy
|
|
# The memory replacement policy parameter determines which
|
|
# objects are purged from memory when memory space is needed.
|
|
#
|
|
# See cache_replacement_policy for details on algorithms.
|
|
#Default:
|
|
# memory_replacement_policy lru
|
|
|
|
# DISK CACHE OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: cache_replacement_policy
|
|
# The cache replacement policy parameter determines which
|
|
# objects are evicted (replaced) when disk space is needed.
|
|
#
|
|
# lru : Squid's original list based LRU policy
|
|
# heap GDSF : Greedy-Dual Size Frequency
|
|
# heap LFUDA: Least Frequently Used with Dynamic Aging
|
|
# heap LRU : LRU policy implemented using a heap
|
|
#
|
|
# Applies to any cache_dir lines listed below this directive.
|
|
#
|
|
# The LRU policies keeps recently referenced objects.
|
|
#
|
|
# The heap GDSF policy optimizes object hit rate by keeping smaller
|
|
# popular objects in cache so it has a better chance of getting a
|
|
# hit. It achieves a lower byte hit rate than LFUDA though since
|
|
# it evicts larger (possibly popular) objects.
|
|
#
|
|
# The heap LFUDA policy keeps popular objects in cache regardless of
|
|
# their size and thus optimizes byte hit rate at the expense of
|
|
# hit rate since one large, popular object will prevent many
|
|
# smaller, slightly less popular objects from being cached.
|
|
#
|
|
# Both policies utilize a dynamic aging mechanism that prevents
|
|
# cache pollution that can otherwise occur with frequency-based
|
|
# replacement policies.
|
|
#
|
|
# NOTE: if using the LFUDA replacement policy you should increase
|
|
# the value of maximum_object_size above its default of 4 MB to
|
|
# to maximize the potential byte hit rate improvement of LFUDA.
|
|
#
|
|
# For more information about the GDSF and LFUDA cache replacement
|
|
# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
|
|
# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
|
|
#Default:
|
|
# cache_replacement_policy lru
|
|
|
|
# TAG: minimum_object_size (bytes)
|
|
# Objects smaller than this size will NOT be saved on disk. The
|
|
# value is specified in bytes, and the default is 0 KB, which
|
|
# means all responses can be stored.
|
|
#Default:
|
|
# no limit
|
|
|
|
# TAG: maximum_object_size (bytes)
|
|
# Set the default value for max-size parameter on any cache_dir.
|
|
# The value is specified in bytes, and the default is 4 MB.
|
|
#
|
|
# If you wish to get a high BYTES hit ratio, you should probably
|
|
# increase this (one 32 MB object hit counts for 3200 10KB
|
|
# hits).
|
|
#
|
|
# If you wish to increase hit ratio more than you want to
|
|
# save bandwidth you should leave this low.
|
|
#
|
|
# NOTE: if using the LFUDA replacement policy you should increase
|
|
# this value to maximize the byte hit rate improvement of LFUDA!
|
|
# See cache_replacement_policy for a discussion of this policy.
|
|
#Default:
|
|
# maximum_object_size 4 MB
|
|
|
|
# TAG: cache_dir
|
|
# Format:
|
|
# cache_dir Type Directory-Name Fs-specific-data [options]
|
|
#
|
|
# You can specify multiple cache_dir lines to spread the
|
|
# cache among different disk partitions.
|
|
#
|
|
# Type specifies the kind of storage system to use. Only "ufs"
|
|
# is built by default. To enable any of the other storage systems
|
|
# see the --enable-storeio configure option.
|
|
#
|
|
# 'Directory' is a top-level directory where cache swap
|
|
# files will be stored. If you want to use an entire disk
|
|
# for caching, this can be the mount-point directory.
|
|
# The directory must exist and be writable by the Squid
|
|
# process. Squid will NOT create this directory for you.
|
|
#
|
|
# In SMP configurations, cache_dir must not precede the workers option
|
|
# and should use configuration macros or conditionals to give each
|
|
# worker interested in disk caching a dedicated cache directory.
|
|
#
|
|
#
|
|
# ==== The ufs store type ====
|
|
#
|
|
# "ufs" is the old well-known Squid storage format that has always
|
|
# been there.
|
|
#
|
|
# Usage:
|
|
# cache_dir ufs Directory-Name Mbytes L1 L2 [options]
|
|
#
|
|
# 'Mbytes' is the amount of disk space (MB) to use under this
|
|
# directory. The default is 100 MB. Change this to suit your
|
|
# configuration. Do NOT put the size of your disk drive here.
|
|
# Instead, if you want Squid to use the entire disk drive,
|
|
# subtract 20% and use that value.
|
|
#
|
|
# 'L1' is the number of first-level subdirectories which
|
|
# will be created under the 'Directory'. The default is 16.
|
|
#
|
|
# 'L2' is the number of second-level subdirectories which
|
|
# will be created under each first-level directory. The default
|
|
# is 256.
|
|
#
|
|
#
|
|
# ==== The aufs store type ====
|
|
#
|
|
# "aufs" uses the same storage format as "ufs", utilizing
|
|
# POSIX-threads to avoid blocking the main Squid process on
|
|
# disk-I/O. This was formerly known in Squid as async-io.
|
|
#
|
|
# Usage:
|
|
# cache_dir aufs Directory-Name Mbytes L1 L2 [options]
|
|
#
|
|
# see argument descriptions under ufs above
|
|
#
|
|
#
|
|
# ==== The diskd store type ====
|
|
#
|
|
# "diskd" uses the same storage format as "ufs", utilizing a
|
|
# separate process to avoid blocking the main Squid process on
|
|
# disk-I/O.
|
|
#
|
|
# Usage:
|
|
# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
|
|
#
|
|
# see argument descriptions under ufs above
|
|
#
|
|
# Q1 specifies the number of unacknowledged I/O requests when Squid
|
|
# stops opening new files. If this many messages are in the queues,
|
|
# Squid won't open new files. Default is 64
|
|
#
|
|
# Q2 specifies the number of unacknowledged messages when Squid
|
|
# starts blocking. If this many messages are in the queues,
|
|
# Squid blocks until it receives some replies. Default is 72
|
|
#
|
|
# When Q1 < Q2 (the default), the cache directory is optimized
|
|
# for lower response time at the expense of a decrease in hit
|
|
# ratio. If Q1 > Q2, the cache directory is optimized for
|
|
# higher hit ratio at the expense of an increase in response
|
|
# time.
|
|
#
|
|
#
|
|
# ==== The rock store type ====
|
|
#
|
|
# Usage:
|
|
# cache_dir rock Directory-Name Mbytes <max-size=bytes> [options]
|
|
#
|
|
# The Rock Store type is a database-style storage. All cached
|
|
# entries are stored in a "database" file, using fixed-size slots,
|
|
# one entry per slot. The database size is specified in MB. The
|
|
# slot size is specified in bytes using the max-size option. See
|
|
# below for more info on the max-size option.
|
|
#
|
|
# If possible, Squid using Rock Store creates a dedicated kid
|
|
# process called "disker" to avoid blocking Squid worker(s) on disk
|
|
# I/O. One disker kid is created for each rock cache_dir. Diskers
|
|
# are created only when Squid, running in daemon mode, has support
|
|
# for the IpcIo disk I/O module.
|
|
#
|
|
# swap-timeout=msec: Squid will not start writing a miss to or
|
|
# reading a hit from disk if it estimates that the swap operation
|
|
# will take more than the specified number of milliseconds. By
|
|
# default and when set to zero, disables the disk I/O time limit
|
|
# enforcement. Ignored when using blocking I/O module because
|
|
# blocking synchronous I/O does not allow Squid to estimate the
|
|
# expected swap wait time.
|
|
#
|
|
# max-swap-rate=swaps/sec: Artificially limits disk access using
|
|
# the specified I/O rate limit. Swap out requests that
|
|
# would cause the average I/O rate to exceed the limit are
|
|
# delayed. Individual swap in requests (i.e., hits or reads) are
|
|
# not delayed, but they do contribute to measured swap rate and
|
|
# since they are placed in the same FIFO queue as swap out
|
|
# requests, they may wait longer if max-swap-rate is smaller.
|
|
# This is necessary on file systems that buffer "too
|
|
# many" writes and then start blocking Squid and other processes
|
|
# while committing those writes to disk. Usually used together
|
|
# with swap-timeout to avoid excessive delays and queue overflows
|
|
# when disk demand exceeds available disk "bandwidth". By default
|
|
# and when set to zero, disables the disk I/O rate limit
|
|
# enforcement. Currently supported by IpcIo module only.
|
|
#
|
|
#
|
|
# ==== The coss store type ====
|
|
#
|
|
# NP: COSS filesystem in Squid-3 has been deemed too unstable for
|
|
# production use and has thus been removed from this release.
|
|
# We hope that it can be made usable again soon.
|
|
#
|
|
# block-size=n defines the "block size" for COSS cache_dir's.
|
|
# Squid uses file numbers as block numbers. Since file numbers
|
|
# are limited to 24 bits, the block size determines the maximum
|
|
# size of the COSS partition. The default is 512 bytes, which
|
|
# leads to a maximum cache_dir size of 512<<24, or 8 GB. Note
|
|
# you should not change the coss block size after Squid
|
|
# has written some objects to the cache_dir.
|
|
#
|
|
# The coss file store has changed from 2.5. Now it uses a file
|
|
# called 'stripe' in the directory names in the config - and
|
|
# this will be created by squid -z.
|
|
#
|
|
#
|
|
# ==== COMMON OPTIONS ====
|
|
#
|
|
# no-store no new objects should be stored to this cache_dir.
|
|
#
|
|
# min-size=n the minimum object size in bytes this cache_dir
|
|
# will accept. It's used to restrict a cache_dir
|
|
# to only store large objects (e.g. AUFS) while
|
|
# other stores are optimized for smaller objects
|
|
# (e.g. COSS).
|
|
# Defaults to 0.
|
|
#
|
|
# max-size=n the maximum object size in bytes this cache_dir
|
|
# supports.
|
|
# The value in maximum_object_size directive sets
|
|
# the default unless more specific details are
|
|
# available (ie a small store capacity).
|
|
#
|
|
# Note: To make optimal use of the max-size limits you should order
|
|
# the cache_dir lines with the smallest max-size value first.
|
|
#
|
|
# Note for coss, max-size must be less than COSS_MEMBUF_SZ,
|
|
# which can be changed with the --with-coss-membuf-size=N configure
|
|
# option.
|
|
#
|
|
#Default:
|
|
# No disk cache. Store cache ojects only in memory.
|
|
#
|
|
|
|
# Uncomment and adjust the following to add a disk cache directory.
|
|
cache_dir ufs /var/cache/squid 256 16 256
|
|
|
|
# TAG: store_dir_select_algorithm
|
|
# How Squid selects which cache_dir to use when the response
|
|
# object will fit into more than one.
|
|
#
|
|
# Regardless of which algorithm is used the cache_dir min-size
|
|
# and max-size parameters are obeyed. As such they can affect
|
|
# the selection algorithm by limiting the set of considered
|
|
# cache_dir.
|
|
#
|
|
# Algorithms:
|
|
#
|
|
# least-load
|
|
#
|
|
# This algorithm is suited to caches with similar cache_dir
|
|
# sizes and disk speeds.
|
|
#
|
|
# The disk with the least I/O pending is selected.
|
|
# When there are multiple disks with the same I/O load ranking
|
|
# the cache_dir with most available capacity is selected.
|
|
#
|
|
# When a mix of cache_dir sizes are configured the faster disks
|
|
# have a naturally lower I/O loading and larger disks have more
|
|
# capacity. So space used to store objects and data throughput
|
|
# may be very unbalanced towards larger disks.
|
|
#
|
|
#
|
|
# round-robin
|
|
#
|
|
# This algorithm is suited to caches with unequal cache_dir
|
|
# disk sizes.
|
|
#
|
|
# Each cache_dir is selected in a rotation. The next suitable
|
|
# cache_dir is used.
|
|
#
|
|
# Available cache_dir capacity is only considered in relation
|
|
# to whether the object will fit and meets the min-size and
|
|
# max-size parameters.
|
|
#
|
|
# Disk I/O loading is only considered to prevent overload on slow
|
|
# disks. This algorithm does not spread objects by size, so any
|
|
# I/O loading per-disk may appear very unbalanced and volatile.
|
|
#
|
|
#Default:
|
|
# store_dir_select_algorithm least-load
|
|
|
|
# TAG: max_open_disk_fds
|
|
# To avoid having disk as the I/O bottleneck Squid can optionally
|
|
# bypass the on-disk cache if more than this amount of disk file
|
|
# descriptors are open.
|
|
#
|
|
# A value of 0 indicates no limit.
|
|
#Default:
|
|
# no limit
|
|
|
|
# TAG: cache_swap_low (percent, 0-100)
|
|
# The low-water mark for cache object replacement.
|
|
# Replacement begins when the swap (disk) usage is above the
|
|
# low-water mark and attempts to maintain utilization near the
|
|
# low-water mark. As swap utilization gets close to high-water
|
|
# mark object eviction becomes more aggressive. If utilization is
|
|
# close to the low-water mark less replacement is done each time.
|
|
#
|
|
# Defaults are 90% and 95%. If you have a large cache, 5% could be
|
|
# hundreds of MB. If this is the case you may wish to set these
|
|
# numbers closer together.
|
|
#
|
|
# See also cache_swap_high
|
|
#Default:
|
|
# cache_swap_low 90
|
|
|
|
# TAG: cache_swap_high (percent, 0-100)
|
|
# The high-water mark for cache object replacement.
|
|
# Replacement begins when the swap (disk) usage is above the
|
|
# low-water mark and attempts to maintain utilization near the
|
|
# low-water mark. As swap utilization gets close to high-water
|
|
# mark object eviction becomes more aggressive. If utilization is
|
|
# close to the low-water mark less replacement is done each time.
|
|
#
|
|
# Defaults are 90% and 95%. If you have a large cache, 5% could be
|
|
# hundreds of MB. If this is the case you may wish to set these
|
|
# numbers closer together.
|
|
#
|
|
# See also cache_swap_low
|
|
#Default:
|
|
# cache_swap_high 95
|
|
|
|
# LOGFILE OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: logformat
|
|
# Usage:
|
|
#
|
|
# logformat <name> <format specification>
|
|
#
|
|
# Defines an access log format.
|
|
#
|
|
# The <format specification> is a string with embedded % format codes
|
|
#
|
|
# % format codes all follow the same basic structure where all but
|
|
# the formatcode is optional. Output strings are automatically escaped
|
|
# as required according to their context and the output format
|
|
# modifiers are usually not needed, but can be specified if an explicit
|
|
# output format is desired.
|
|
#
|
|
# % ["|[|'|#] [-] [[0]width] [{argument}] formatcode
|
|
#
|
|
# " output in quoted string format
|
|
# [ output in squid text log format as used by log_mime_hdrs
|
|
# # output in URL quoted format
|
|
# ' output as-is
|
|
#
|
|
# - left aligned
|
|
#
|
|
# width minimum and/or maximum field width:
|
|
# [width_min][.width_max]
|
|
# When minimum starts with 0, the field is zero-padded.
|
|
# String values exceeding maximum width are truncated.
|
|
#
|
|
# {arg} argument such as header name etc
|
|
#
|
|
# Format codes:
|
|
#
|
|
# % a literal % character
|
|
# sn Unique sequence number per log line entry
|
|
# err_code The ID of an error response served by Squid or
|
|
# a similar internal error identifier.
|
|
# err_detail Additional err_code-dependent error information.
|
|
# note The annotation specified by the argument. Also
|
|
# logs the adaptation meta headers set by the
|
|
# adaptation_meta configuration parameter.
|
|
# If no argument given all annotations logged.
|
|
# The argument may include a separator to use with
|
|
# annotation values:
|
|
# name[:separator]
|
|
# By default, multiple note values are separated with ","
|
|
# and multiple notes are separated with "\r\n".
|
|
# When logging named notes with %{name}note, the
|
|
# explicitly configured separator is used between note
|
|
# values. When logging all notes with %note, the
|
|
# explicitly configured separator is used between
|
|
# individual notes. There is currently no way to
|
|
# specify both value and notes separators when logging
|
|
# all notes with %note.
|
|
#
|
|
# Connection related format codes:
|
|
#
|
|
# >a Client source IP address
|
|
# >A Client FQDN
|
|
# >p Client source port
|
|
# >eui Client source EUI (MAC address, EUI-48 or EUI-64 identifier)
|
|
# >la Local IP address the client connected to
|
|
# >lp Local port number the client connected to
|
|
# >qos Client connection TOS/DSCP value set by Squid
|
|
# >nfmark Client connection netfilter mark set by Squid
|
|
#
|
|
# la Local listening IP address the client connection was connected to.
|
|
# lp Local listening port number the client connection was connected to.
|
|
#
|
|
# <a Server IP address of the last server or peer connection
|
|
# <A Server FQDN or peer name
|
|
# <p Server port number of the last server or peer connection
|
|
# <la Local IP address of the last server or peer connection
|
|
# <lp Local port number of the last server or peer connection
|
|
# <qos Server connection TOS/DSCP value set by Squid
|
|
# <nfmark Server connection netfilter mark set by Squid
|
|
#
|
|
# Time related format codes:
|
|
#
|
|
# ts Seconds since epoch
|
|
# tu subsecond time (milliseconds)
|
|
# tl Local time. Optional strftime format argument
|
|
# default %d/%b/%Y:%H:%M:%S %z
|
|
# tg GMT time. Optional strftime format argument
|
|
# default %d/%b/%Y:%H:%M:%S %z
|
|
# tr Response time (milliseconds)
|
|
# dt Total time spent making DNS lookups (milliseconds)
|
|
#
|
|
# Access Control related format codes:
|
|
#
|
|
# et Tag returned by external acl
|
|
# ea Log string returned by external acl
|
|
# un User name (any available)
|
|
# ul User name from authentication
|
|
# ue User name from external acl helper
|
|
# ui User name from ident
|
|
# us User name from SSL
|
|
#
|
|
# HTTP related format codes:
|
|
#
|
|
# [http::]>h Original received request header.
|
|
# Usually differs from the request header sent by
|
|
# Squid, although most fields are often preserved.
|
|
# Accepts optional header field name/value filter
|
|
# argument using name[:[separator]element] format.
|
|
# [http::]>ha Received request header after adaptation and
|
|
# redirection (pre-cache REQMOD vectoring point).
|
|
# Usually differs from the request header sent by
|
|
# Squid, although most fields are often preserved.
|
|
# Optional header name argument as for >h
|
|
# [http::]<h Reply header. Optional header name argument
|
|
# as for >h
|
|
# [http::]>Hs HTTP status code sent to the client
|
|
# [http::]<Hs HTTP status code received from the next hop
|
|
# [http::]<bs Number of HTTP-equivalent message body bytes
|
|
# received from the next hop, excluding chunked
|
|
# transfer encoding and control messages.
|
|
# Generated FTP/Gopher listings are treated as
|
|
# received bodies.
|
|
# [http::]mt MIME content type
|
|
# [http::]rm Request method (GET/POST etc)
|
|
# [http::]>rm Request method from client
|
|
# [http::]<rm Request method sent to server or peer
|
|
# [http::]ru Request URL from client (historic, filtered for logging)
|
|
# [http::]>ru Request URL from client
|
|
# [http::]<ru Request URL sent to server or peer
|
|
# [http::]rp Request URL-Path excluding hostname
|
|
# [http::]>rp Request URL-Path excluding hostname from client
|
|
# [http::]<rp Request URL-Path excluding hostname sento to server or peer
|
|
# [http::]rv Request protocol version
|
|
# [http::]>rv Request protocol version from client
|
|
# [http::]<rv Request protocol version sent to server or peer
|
|
# [http::]<st Sent reply size including HTTP headers
|
|
# [http::]>st Received request size including HTTP headers. In the
|
|
# case of chunked requests the chunked encoding metadata
|
|
# are not included
|
|
# [http::]>sh Received HTTP request headers size
|
|
# [http::]<sh Sent HTTP reply headers size
|
|
# [http::]st Request+Reply size including HTTP headers
|
|
# [http::]<sH Reply high offset sent
|
|
# [http::]<sS Upstream object size
|
|
# [http::]<pt Peer response time in milliseconds. The timer starts
|
|
# when the last request byte is sent to the next hop
|
|
# and stops when the last response byte is received.
|
|
# [http::]<tt Total server-side time in milliseconds. The timer
|
|
# starts with the first connect request (or write I/O)
|
|
# sent to the first selected peer. The timer stops
|
|
# with the last I/O with the last peer.
|
|
#
|
|
# Squid handling related format codes:
|
|
#
|
|
# Ss Squid request status (TCP_MISS etc)
|
|
# Sh Squid hierarchy status (DEFAULT_PARENT etc)
|
|
#
|
|
# SSL-related format codes:
|
|
#
|
|
# ssl::bump_mode SslBump decision for the transaction:
|
|
#
|
|
# For CONNECT requests that initiated bumping of
|
|
# a connection and for any request received on
|
|
# an already bumped connection, Squid logs the
|
|
# corresponding SslBump mode ("server-first" or
|
|
# "client-first"). See the ssl_bump option for
|
|
# more information about these modes.
|
|
#
|
|
# A "none" token is logged for requests that
|
|
# triggered "ssl_bump" ACL evaluation matching
|
|
# either a "none" rule or no rules at all.
|
|
#
|
|
# In all other cases, a single dash ("-") is
|
|
# logged.
|
|
#
|
|
# If ICAP is enabled, the following code becomes available (as
|
|
# well as ICAP log codes documented with the icap_log option):
|
|
#
|
|
# icap::tt Total ICAP processing time for the HTTP
|
|
# transaction. The timer ticks when ICAP
|
|
# ACLs are checked and when ICAP
|
|
# transaction is in progress.
|
|
#
|
|
# If adaptation is enabled the following three codes become available:
|
|
#
|
|
# adapt::<last_h The header of the last ICAP response or
|
|
# meta-information from the last eCAP
|
|
# transaction related to the HTTP transaction.
|
|
# Like <h, accepts an optional header name
|
|
# argument.
|
|
#
|
|
# adapt::sum_trs Summed adaptation transaction response
|
|
# times recorded as a comma-separated list in
|
|
# the order of transaction start time. Each time
|
|
# value is recorded as an integer number,
|
|
# representing response time of one or more
|
|
# adaptation (ICAP or eCAP) transaction in
|
|
# milliseconds. When a failed transaction is
|
|
# being retried or repeated, its time is not
|
|
# logged individually but added to the
|
|
# replacement (next) transaction. See also:
|
|
# adapt::all_trs.
|
|
#
|
|
# adapt::all_trs All adaptation transaction response times.
|
|
# Same as adaptation_strs but response times of
|
|
# individual transactions are never added
|
|
# together. Instead, all transaction response
|
|
# times are recorded individually.
|
|
#
|
|
# You can prefix adapt::*_trs format codes with adaptation
|
|
# service name in curly braces to record response time(s) specific
|
|
# to that service. For example: %{my_service}adapt::sum_trs
|
|
#
|
|
# If SSL is enabled, the following formating codes become available:
|
|
#
|
|
# %ssl::>cert_subject The Subject field of the received client
|
|
# SSL certificate or a dash ('-') if Squid has
|
|
# received an invalid/malformed certificate or
|
|
# no certificate at all. Consider encoding the
|
|
# logged value because Subject often has spaces.
|
|
#
|
|
# %ssl::>cert_issuer The Issuer field of the received client
|
|
# SSL certificate or a dash ('-') if Squid has
|
|
# received an invalid/malformed certificate or
|
|
# no certificate at all. Consider encoding the
|
|
# logged value because Issuer often has spaces.
|
|
#
|
|
# The default formats available (which do not need re-defining) are:
|
|
#
|
|
#logformat squid %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru %[un %Sh/%<a %mt
|
|
#logformat common %>a %[ui %[un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st %Ss:%Sh
|
|
#logformat combined %>a %[ui %[un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh
|
|
#logformat referrer %ts.%03tu %>a %{Referer}>h %ru
|
|
#logformat useragent %>a [%tl] "%{User-Agent}>h"
|
|
#
|
|
# NOTE: When the log_mime_hdrs directive is set to ON.
|
|
# The squid, common and combined formats have a safely encoded copy
|
|
# of the mime headers appended to each line within a pair of brackets.
|
|
#
|
|
# NOTE: The common and combined formats are not quite true to the Apache definition.
|
|
# The logs from Squid contain an extra status and hierarchy code appended.
|
|
#
|
|
#Default:
|
|
# The format definitions squid, common, combined, referrer, useragent are built in.
|
|
|
|
# TAG: access_log
|
|
# Configures whether and how Squid logs HTTP and ICP transactions.
|
|
# If access logging is enabled, a single line is logged for every
|
|
# matching HTTP or ICP request. The recommended directive formats are:
|
|
#
|
|
# access_log <module>:<place> [option ...] [acl acl ...]
|
|
# access_log none [acl acl ...]
|
|
#
|
|
# The following directive format is accepted but may be deprecated:
|
|
# access_log <module>:<place> [<logformat name> [acl acl ...]]
|
|
#
|
|
# In most cases, the first ACL name must not contain the '=' character
|
|
# and should not be equal to an existing logformat name. You can always
|
|
# start with an 'all' ACL to work around those restrictions.
|
|
#
|
|
# Will log to the specified module:place using the specified format (which
|
|
# must be defined in a logformat directive) those entries which match
|
|
# ALL the acl's specified (which must be defined in acl clauses).
|
|
# If no acl is specified, all requests will be logged to this destination.
|
|
#
|
|
# ===== Available options for the recommended directive format =====
|
|
#
|
|
# logformat=name Names log line format (either built-in or
|
|
# defined by a logformat directive). Defaults
|
|
# to 'squid'.
|
|
#
|
|
# buffer-size=64KB Defines approximate buffering limit for log
|
|
# records (see buffered_logs). Squid should not
|
|
# keep more than the specified size and, hence,
|
|
# should flush records before the buffer becomes
|
|
# full to avoid overflows under normal
|
|
# conditions (the exact flushing algorithm is
|
|
# module-dependent though). The on-error option
|
|
# controls overflow handling.
|
|
#
|
|
# on-error=die|drop Defines action on unrecoverable errors. The
|
|
# 'drop' action ignores (i.e., does not log)
|
|
# affected log records. The default 'die' action
|
|
# kills the affected worker. The drop action
|
|
# support has not been tested for modules other
|
|
# than tcp.
|
|
#
|
|
# ===== Modules Currently available =====
|
|
#
|
|
# none Do not log any requests matching these ACL.
|
|
# Do not specify Place or logformat name.
|
|
#
|
|
# stdio Write each log line to disk immediately at the completion of
|
|
# each request.
|
|
# Place: the filename and path to be written.
|
|
#
|
|
# daemon Very similar to stdio. But instead of writing to disk the log
|
|
# line is passed to a daemon helper for asychronous handling instead.
|
|
# Place: varies depending on the daemon.
|
|
#
|
|
# log_file_daemon Place: the file name and path to be written.
|
|
#
|
|
# syslog To log each request via syslog facility.
|
|
# Place: The syslog facility and priority level for these entries.
|
|
# Place Format: facility.priority
|
|
#
|
|
# where facility could be any of:
|
|
# authpriv, daemon, local0 ... local7 or user.
|
|
#
|
|
# And priority could be any of:
|
|
# err, warning, notice, info, debug.
|
|
#
|
|
# udp To send each log line as text data to a UDP receiver.
|
|
# Place: The destination host name or IP and port.
|
|
# Place Format: //host:port
|
|
#
|
|
# tcp To send each log line as text data to a TCP receiver.
|
|
# Lines may be accumulated before sending (see buffered_logs).
|
|
# Place: The destination host name or IP and port.
|
|
# Place Format: //host:port
|
|
#
|
|
# Default:
|
|
# access_log daemon:/var/log/squid/access.log squid
|
|
#Default:
|
|
# access_log daemon:/var/log/squid/access.log squid
|
|
|
|
# TAG: icap_log
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# ICAP log files record ICAP transaction summaries, one line per
|
|
# transaction.
|
|
#
|
|
# The icap_log option format is:
|
|
# icap_log <filepath> [<logformat name> [acl acl ...]]
|
|
# icap_log none [acl acl ...]]
|
|
#
|
|
# Please see access_log option documentation for details. The two
|
|
# kinds of logs share the overall configuration approach and many
|
|
# features.
|
|
#
|
|
# ICAP processing of a single HTTP message or transaction may
|
|
# require multiple ICAP transactions. In such cases, multiple
|
|
# ICAP transaction log lines will correspond to a single access
|
|
# log line.
|
|
#
|
|
# ICAP log uses logformat codes that make sense for an ICAP
|
|
# transaction. Header-related codes are applied to the HTTP header
|
|
# embedded in an ICAP server response, with the following caveats:
|
|
# For REQMOD, there is no HTTP response header unless the ICAP
|
|
# server performed request satisfaction. For RESPMOD, the HTTP
|
|
# request header is the header sent to the ICAP server. For
|
|
# OPTIONS, there are no HTTP headers.
|
|
#
|
|
# The following format codes are also available for ICAP logs:
|
|
#
|
|
# icap::<A ICAP server IP address. Similar to <A.
|
|
#
|
|
# icap::<service_name ICAP service name from the icap_service
|
|
# option in Squid configuration file.
|
|
#
|
|
# icap::ru ICAP Request-URI. Similar to ru.
|
|
#
|
|
# icap::rm ICAP request method (REQMOD, RESPMOD, or
|
|
# OPTIONS). Similar to existing rm.
|
|
#
|
|
# icap::>st Bytes sent to the ICAP server (TCP payload
|
|
# only; i.e., what Squid writes to the socket).
|
|
#
|
|
# icap::<st Bytes received from the ICAP server (TCP
|
|
# payload only; i.e., what Squid reads from
|
|
# the socket).
|
|
#
|
|
# icap::<bs Number of message body bytes received from the
|
|
# ICAP server. ICAP message body, if any, usually
|
|
# includes encapsulated HTTP message headers and
|
|
# possibly encapsulated HTTP message body. The
|
|
# HTTP body part is dechunked before its size is
|
|
# computed.
|
|
#
|
|
# icap::tr Transaction response time (in
|
|
# milliseconds). The timer starts when
|
|
# the ICAP transaction is created and
|
|
# stops when the transaction is completed.
|
|
# Similar to tr.
|
|
#
|
|
# icap::tio Transaction I/O time (in milliseconds). The
|
|
# timer starts when the first ICAP request
|
|
# byte is scheduled for sending. The timers
|
|
# stops when the last byte of the ICAP response
|
|
# is received.
|
|
#
|
|
# icap::to Transaction outcome: ICAP_ERR* for all
|
|
# transaction errors, ICAP_OPT for OPTION
|
|
# transactions, ICAP_ECHO for 204
|
|
# responses, ICAP_MOD for message
|
|
# modification, and ICAP_SAT for request
|
|
# satisfaction. Similar to Ss.
|
|
#
|
|
# icap::Hs ICAP response status code. Similar to Hs.
|
|
#
|
|
# icap::>h ICAP request header(s). Similar to >h.
|
|
#
|
|
# icap::<h ICAP response header(s). Similar to <h.
|
|
#
|
|
# The default ICAP log format, which can be used without an explicit
|
|
# definition, is called icap_squid:
|
|
#
|
|
#logformat icap_squid %ts.%03tu %6icap::tr %>a %icap::to/%03icap::Hs %icap::<size %icap::rm %icap::ru% %un -/%icap::<A -
|
|
#
|
|
# See also: logformat, log_icap, and %adapt::<last_h
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: logfile_daemon
|
|
# Specify the path to the logfile-writing daemon. This daemon is
|
|
# used to write the access and store logs, if configured.
|
|
#
|
|
# Squid sends a number of commands to the log daemon:
|
|
# L<data>\n - logfile data
|
|
# R\n - rotate file
|
|
# T\n - truncate file
|
|
# O\n - reopen file
|
|
# F\n - flush file
|
|
# r<n>\n - set rotate count to <n>
|
|
# b<n>\n - 1 = buffer output, 0 = don't buffer output
|
|
#
|
|
# No responses is expected.
|
|
#Default:
|
|
# logfile_daemon /usr/libexec/log_file_daemon
|
|
|
|
# TAG: log_access
|
|
# Remove this line. Use acls with access_log directives to control access logging
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: log_icap
|
|
# Remove this line. Use acls with icap_log directives to control icap logging
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: stats_collection allow|deny acl acl...
|
|
# This options allows you to control which requests gets accounted
|
|
# in performance counters.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Allow logging for all transactions.
|
|
|
|
# TAG: cache_store_log
|
|
# Logs the activities of the storage manager. Shows which
|
|
# objects are ejected from the cache, and which objects are
|
|
# saved and for how long.
|
|
# There are not really utilities to analyze this data, so you can safely
|
|
# disable it (the default).
|
|
#
|
|
# Store log uses modular logging outputs. See access_log for the list
|
|
# of modules supported.
|
|
#
|
|
# Example:
|
|
# cache_store_log stdio:/var/log/squid/store.log
|
|
# cache_store_log daemon:/var/log/squid/store.log
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: cache_swap_state
|
|
# Location for the cache "swap.state" file. This index file holds
|
|
# the metadata of objects saved on disk. It is used to rebuild
|
|
# the cache during startup. Normally this file resides in each
|
|
# 'cache_dir' directory, but you may specify an alternate
|
|
# pathname here. Note you must give a full filename, not just
|
|
# a directory. Since this is the index for the whole object
|
|
# list you CANNOT periodically rotate it!
|
|
#
|
|
# If %s can be used in the file name it will be replaced with a
|
|
# a representation of the cache_dir name where each / is replaced
|
|
# with '.'. This is needed to allow adding/removing cache_dir
|
|
# lines when cache_swap_log is being used.
|
|
#
|
|
# If have more than one 'cache_dir', and %s is not used in the name
|
|
# these swap logs will have names such as:
|
|
#
|
|
# cache_swap_log.00
|
|
# cache_swap_log.01
|
|
# cache_swap_log.02
|
|
#
|
|
# The numbered extension (which is added automatically)
|
|
# corresponds to the order of the 'cache_dir' lines in this
|
|
# configuration file. If you change the order of the 'cache_dir'
|
|
# lines in this file, these index files will NOT correspond to
|
|
# the correct 'cache_dir' entry (unless you manually rename
|
|
# them). We recommend you do NOT use this option. It is
|
|
# better to keep these index files in each 'cache_dir' directory.
|
|
#Default:
|
|
# Store the journal inside its cache_dir
|
|
|
|
# TAG: logfile_rotate
|
|
# Specifies the number of logfile rotations to make when you
|
|
# type 'squid -k rotate'. The default is 10, which will rotate
|
|
# with extensions 0 through 9. Setting logfile_rotate to 0 will
|
|
# disable the file name rotation, but the logfiles are still closed
|
|
# and re-opened. This will enable you to rename the logfiles
|
|
# yourself just before sending the rotate signal.
|
|
#
|
|
# Note, the 'squid -k rotate' command normally sends a USR1
|
|
# signal to the running squid process. In certain situations
|
|
# (e.g. on Linux with Async I/O), USR1 is used for other
|
|
# purposes, so -k rotate uses another signal. It is best to get
|
|
# in the habit of using 'squid -k rotate' instead of 'kill -USR1
|
|
# <pid>'.
|
|
#
|
|
# Note, from Squid-3.1 this option is only a default for cache.log,
|
|
# that log can be rotated separately by using debug_options.
|
|
#Default:
|
|
# logfile_rotate 10
|
|
|
|
# TAG: emulate_httpd_log
|
|
# Replace this with an access_log directive using the format 'common' or 'combined'.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: log_ip_on_direct
|
|
# Remove this option from your config. To log server or peer names use %<A in the log format.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: mime_table
|
|
# Path to Squid's icon configuration file.
|
|
#
|
|
# You shouldn't need to change this, but the default file contains
|
|
# examples and formatting information if you do.
|
|
#Default:
|
|
# mime_table /etc/squid/mime.conf
|
|
|
|
# TAG: log_mime_hdrs on|off
|
|
# The Cache can record both the request and the response MIME
|
|
# headers for each HTTP transaction. The headers are encoded
|
|
# safely and will appear as two bracketed fields at the end of
|
|
# the access log (for either the native or httpd-emulated log
|
|
# formats). To enable this logging set log_mime_hdrs to 'on'.
|
|
#Default:
|
|
# log_mime_hdrs off
|
|
|
|
# TAG: useragent_log
|
|
# Replace this with an access_log directive using the format 'useragent'.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: referer_log
|
|
# Replace this with an access_log directive using the format 'referrer'.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: pid_filename
|
|
# A filename to write the process-id to. To disable, enter "none".
|
|
#Default:
|
|
pid_filename /var/run/squid/squid.pid
|
|
|
|
# TAG: log_fqdn
|
|
# Remove this option from your config. To log FQDN use %>A in the log format.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: client_netmask
|
|
# A netmask for client addresses in logfiles and cachemgr output.
|
|
# Change this to protect the privacy of your cache clients.
|
|
# A netmask of 255.255.255.0 will log all IP's in that range with
|
|
# the last digit set to '0'.
|
|
#Default:
|
|
# Log full client IP address
|
|
|
|
# TAG: forward_log
|
|
# Use a regular access.log with ACL limiting it to MISS events.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: strip_query_terms
|
|
# By default, Squid strips query terms from requested URLs before
|
|
# logging. This protects your user's privacy and reduces log size.
|
|
#
|
|
# When investigating HIT/MISS or other caching behaviour you
|
|
# will need to disable this to see the full URL used by Squid.
|
|
#Default:
|
|
# strip_query_terms on
|
|
|
|
# TAG: buffered_logs on|off
|
|
# Whether to write/send access_log records ASAP or accumulate them and
|
|
# then write/send them in larger chunks. Buffering may improve
|
|
# performance because it decreases the number of I/Os. However,
|
|
# buffering increases the delay before log records become available to
|
|
# the final recipient (e.g., a disk file or logging daemon) and,
|
|
# hence, increases the risk of log records loss.
|
|
#
|
|
# Note that even when buffered_logs are off, Squid may have to buffer
|
|
# records if it cannot write/send them immediately due to pending I/Os
|
|
# (e.g., the I/O writing the previous log record) or connectivity loss.
|
|
#
|
|
# Currently honored by 'daemon' and 'tcp' access_log modules only.
|
|
#Default:
|
|
# buffered_logs off
|
|
|
|
# TAG: netdb_filename
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icmp
|
|
#
|
|
# Where Squid stores it's netdb journal.
|
|
# When enabled this journal preserves netdb state between restarts.
|
|
#
|
|
# To disable, enter "none".
|
|
#Default:
|
|
# netdb_filename stdio:/var/log/squid/netdb.state
|
|
|
|
# OPTIONS FOR TROUBLESHOOTING
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: cache_log
|
|
# Squid administrative logging file.
|
|
#
|
|
# This is where general information about Squid behavior goes. You can
|
|
# increase the amount of data logged to this file and how often it is
|
|
# rotated with "debug_options"
|
|
#Default:
|
|
# cache_log /var/log/squid/cache.log
|
|
|
|
# TAG: debug_options
|
|
# Logging options are set as section,level where each source file
|
|
# is assigned a unique section. Lower levels result in less
|
|
# output, Full debugging (level 9) can result in a very large
|
|
# log file, so be careful.
|
|
#
|
|
# The magic word "ALL" sets debugging levels for all sections.
|
|
# The default is to run with "ALL,1" to record important warnings.
|
|
#
|
|
# The rotate=N option can be used to keep more or less of these logs
|
|
# than would otherwise be kept by logfile_rotate.
|
|
# For most uses a single log should be enough to monitor current
|
|
# events affecting Squid.
|
|
#Default:
|
|
# Log all critical and important messages.
|
|
|
|
# TAG: coredump_dir
|
|
# By default Squid leaves core files in the directory from where
|
|
# it was started. If you set 'coredump_dir' to a directory
|
|
# that exists, Squid will chdir() to that directory at startup
|
|
# and coredump files will be left there.
|
|
#
|
|
#Default:
|
|
# Use the directory from where Squid was started.
|
|
#
|
|
|
|
# Leave coredumps in the first cache dir
|
|
coredump_dir /var/log/squid/cache/squid
|
|
|
|
# OPTIONS FOR FTP GATEWAYING
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: ftp_user
|
|
# If you want the anonymous login password to be more informative
|
|
# (and enable the use of picky FTP servers), set this to something
|
|
# reasonable for your domain, like wwwuser@somewhere.net
|
|
#
|
|
# The reason why this is domainless by default is the
|
|
# request can be made on the behalf of a user in any domain,
|
|
# depending on how the cache is used.
|
|
# Some FTP server also validate the email address is valid
|
|
# (for example perl.com).
|
|
#Default:
|
|
# ftp_user Squid@
|
|
|
|
# TAG: ftp_passive
|
|
# If your firewall does not allow Squid to use passive
|
|
# connections, turn off this option.
|
|
#
|
|
# Use of ftp_epsv_all option requires this to be ON.
|
|
#Default:
|
|
# ftp_passive on
|
|
|
|
# TAG: ftp_epsv_all
|
|
# FTP Protocol extensions permit the use of a special "EPSV ALL" command.
|
|
#
|
|
# NATs may be able to put the connection on a "fast path" through the
|
|
# translator, as the EPRT command will never be used and therefore,
|
|
# translation of the data portion of the segments will never be needed.
|
|
#
|
|
# When a client only expects to do two-way FTP transfers this may be
|
|
# useful.
|
|
# If squid finds that it must do a three-way FTP transfer after issuing
|
|
# an EPSV ALL command, the FTP session will fail.
|
|
#
|
|
# If you have any doubts about this option do not use it.
|
|
# Squid will nicely attempt all other connection methods.
|
|
#
|
|
# Requires ftp_passive to be ON (default) for any effect.
|
|
#Default:
|
|
# ftp_epsv_all off
|
|
|
|
# TAG: ftp_epsv
|
|
# FTP Protocol extensions permit the use of a special "EPSV" command.
|
|
#
|
|
# NATs may be able to put the connection on a "fast path" through the
|
|
# translator using EPSV, as the EPRT command will never be used
|
|
# and therefore, translation of the data portion of the segments
|
|
# will never be needed.
|
|
#
|
|
# Turning this OFF will prevent EPSV being attempted.
|
|
# WARNING: Doing so will convert Squid back to the old behavior with all
|
|
# the related problems with external NAT devices/layers.
|
|
#
|
|
# Requires ftp_passive to be ON (default) for any effect.
|
|
#Default:
|
|
# ftp_epsv on
|
|
|
|
# TAG: ftp_eprt
|
|
# FTP Protocol extensions permit the use of a special "EPRT" command.
|
|
#
|
|
# This extension provides a protocol neutral alternative to the
|
|
# IPv4-only PORT command. When supported it enables active FTP data
|
|
# channels over IPv6 and efficient NAT handling.
|
|
#
|
|
# Turning this OFF will prevent EPRT being attempted and will skip
|
|
# straight to using PORT for IPv4 servers.
|
|
#
|
|
# Some devices are known to not handle this extension correctly and
|
|
# may result in crashes. Devices which suport EPRT enough to fail
|
|
# cleanly will result in Squid attempting PORT anyway. This directive
|
|
# should only be disabled when EPRT results in device failures.
|
|
#
|
|
# WARNING: Doing so will convert Squid back to the old behavior with all
|
|
# the related problems with external NAT devices/layers and IPv4-only FTP.
|
|
#Default:
|
|
# ftp_eprt on
|
|
|
|
# TAG: ftp_sanitycheck
|
|
# For security and data integrity reasons Squid by default performs
|
|
# sanity checks of the addresses of FTP data connections ensure the
|
|
# data connection is to the requested server. If you need to allow
|
|
# FTP connections to servers using another IP address for the data
|
|
# connection turn this off.
|
|
#Default:
|
|
# ftp_sanitycheck on
|
|
|
|
# TAG: ftp_telnet_protocol
|
|
# The FTP protocol is officially defined to use the telnet protocol
|
|
# as transport channel for the control connection. However, many
|
|
# implementations are broken and does not respect this aspect of
|
|
# the FTP protocol.
|
|
#
|
|
# If you have trouble accessing files with ASCII code 255 in the
|
|
# path or similar problems involving this ASCII code you can
|
|
# try setting this directive to off. If that helps, report to the
|
|
# operator of the FTP server in question that their FTP server
|
|
# is broken and does not follow the FTP standard.
|
|
#Default:
|
|
# ftp_telnet_protocol on
|
|
|
|
# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: diskd_program
|
|
# Specify the location of the diskd executable.
|
|
# Note this is only useful if you have compiled in
|
|
# diskd as one of the store io modules.
|
|
#Default:
|
|
# diskd_program /usr/libexec/diskd
|
|
|
|
# TAG: unlinkd_program
|
|
# Specify the location of the executable for file deletion process.
|
|
#Default:
|
|
# unlinkd_program /usr/libexec/unlinkd
|
|
|
|
# TAG: pinger_program
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icmp
|
|
#
|
|
# Specify the location of the executable for the pinger process.
|
|
#Default:
|
|
# pinger_program /usr/libexec/pinger
|
|
|
|
# TAG: pinger_enable
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icmp
|
|
#
|
|
# Control whether the pinger is active at run-time.
|
|
# Enables turning ICMP pinger on and off with a simple
|
|
# squid -k reconfigure.
|
|
#Default:
|
|
# pinger_enable on
|
|
|
|
# OPTIONS FOR URL REWRITING
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: url_rewrite_program
|
|
# Specify the location of the executable URL rewriter to use.
|
|
# Since they can perform almost any function there isn't one included.
|
|
#
|
|
# For each requested URL, the rewriter will receive on line with the format
|
|
#
|
|
# [channel-ID <SP>] URL <SP> client_ip "/" fqdn <SP> user <SP> method [<SP> kv-pairs]<NL>
|
|
#
|
|
#
|
|
# After processing the request the helper must reply using the following format:
|
|
#
|
|
# [channel-ID <SP>] result [<SP> kv-pairs]
|
|
#
|
|
# The result code can be:
|
|
#
|
|
# OK status=30N url="..."
|
|
# Redirect the URL to the one supplied in 'url='.
|
|
# 'status=' is optional and contains the status code to send
|
|
# the client in Squids HTTP response. It must be one of the
|
|
# HTTP redirect status codes: 301, 302, 303, 307, 308.
|
|
# When no status is given Squid will use 302.
|
|
#
|
|
# OK rewrite-url="..."
|
|
# Rewrite the URL to the one supplied in 'rewrite-url='.
|
|
# The new URL is fetched directly by Squid and returned to
|
|
# the client as the response to its request.
|
|
#
|
|
# OK
|
|
# When neither of url= and rewrite-url= are sent Squid does
|
|
# not change the URL.
|
|
#
|
|
# ERR
|
|
# Do not change the URL.
|
|
#
|
|
# BH
|
|
# An internal error occurred in the helper, preventing
|
|
# a result being identified. The 'message=' key name is
|
|
# reserved for delivering a log message.
|
|
#
|
|
#
|
|
# In the future, the interface protocol will be extended with
|
|
# key=value pairs ("kv-pairs" shown above). Helper programs
|
|
# should be prepared to receive and possibly ignore additional
|
|
# whitespace-separated tokens on each input line.
|
|
#
|
|
# When using the concurrency= option the protocol is changed by
|
|
# introducing a query channel tag in front of the request/response.
|
|
# The query channel tag is a number between 0 and concurrency-1.
|
|
# This value must be echoed back unchanged to Squid as the first part
|
|
# of the response relating to its request.
|
|
#
|
|
# WARNING: URL re-writing ability should be avoided whenever possible.
|
|
# Use the URL redirect form of response instead.
|
|
#
|
|
# Re-write creates a difference in the state held by the client
|
|
# and server. Possibly causing confusion when the server response
|
|
# contains snippets of its view state. Embeded URLs, response
|
|
# and content Location headers, etc. are not re-written by this
|
|
# interface.
|
|
#
|
|
# By default, a URL rewriter is not used.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: url_rewrite_children
|
|
# The maximum number of redirector processes to spawn. If you limit
|
|
# it too few Squid will have to wait for them to process a backlog of
|
|
# URLs, slowing it down. If you allow too many they will use RAM
|
|
# and other system resources noticably.
|
|
#
|
|
# The startup= and idle= options allow some measure of skew in your
|
|
# tuning.
|
|
#
|
|
# startup=
|
|
#
|
|
# Sets a minimum of how many processes are to be spawned when Squid
|
|
# starts or reconfigures. When set to zero the first request will
|
|
# cause spawning of the first child process to handle it.
|
|
#
|
|
# Starting too few will cause an initial slowdown in traffic as Squid
|
|
# attempts to simultaneously spawn enough processes to cope.
|
|
#
|
|
# idle=
|
|
#
|
|
# Sets a minimum of how many processes Squid is to try and keep available
|
|
# at all times. When traffic begins to rise above what the existing
|
|
# processes can handle this many more will be spawned up to the maximum
|
|
# configured. A minimum setting of 1 is required.
|
|
#
|
|
# concurrency=
|
|
#
|
|
# The number of requests each redirector helper can handle in
|
|
# parallel. Defaults to 0 which indicates the redirector
|
|
# is a old-style single threaded redirector.
|
|
#
|
|
# When this directive is set to a value >= 1 then the protocol
|
|
# used to communicate with the helper is modified to include
|
|
# an ID in front of the request/response. The ID from the request
|
|
# must be echoed back with the response to that request.
|
|
#Default:
|
|
# url_rewrite_children 20 startup=0 idle=1 concurrency=0
|
|
|
|
# TAG: url_rewrite_host_header
|
|
# To preserve same-origin security policies in browsers and
|
|
# prevent Host: header forgery by redirectors Squid rewrites
|
|
# any Host: header in redirected requests.
|
|
#
|
|
# If you are running an accelerator this may not be a wanted
|
|
# effect of a redirector. This directive enables you disable
|
|
# Host: alteration in reverse-proxy traffic.
|
|
#
|
|
# WARNING: Entries are cached on the result of the URL rewriting
|
|
# process, so be careful if you have domain-virtual hosts.
|
|
#
|
|
# WARNING: Squid and other software verifies the URL and Host
|
|
# are matching, so be careful not to relay through other proxies
|
|
# or inspecting firewalls with this disabled.
|
|
#Default:
|
|
# url_rewrite_host_header on
|
|
|
|
# TAG: url_rewrite_access
|
|
# If defined, this access list specifies which requests are
|
|
# sent to the redirector processes.
|
|
#
|
|
# This clause supports both fast and slow acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Allow, unless rules exist in squid.conf.
|
|
|
|
# TAG: url_rewrite_bypass
|
|
# When this is 'on', a request will not go through the
|
|
# redirector if all the helpers are busy. If this is 'off'
|
|
# and the redirector queue grows too large, Squid will exit
|
|
# with a FATAL error and ask you to increase the number of
|
|
# redirectors. You should only enable this if the redirectors
|
|
# are not critical to your caching system. If you use
|
|
# redirectors for access control, and you enable this option,
|
|
# users may have access to pages they should not
|
|
# be allowed to request.
|
|
#Default:
|
|
# url_rewrite_bypass off
|
|
|
|
# OPTIONS FOR STORE ID
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: store_id_program
|
|
# Specify the location of the executable StoreID helper to use.
|
|
# Since they can perform almost any function there isn't one included.
|
|
#
|
|
# For each requested URL, the helper will receive one line with the format
|
|
#
|
|
# [channel-ID <SP>] URL <SP> client_ip "/" fqdn <SP> user <SP> method [<SP> kv-pairs]<NL>
|
|
#
|
|
#
|
|
# After processing the request the helper must reply using the following format:
|
|
#
|
|
# [channel-ID <SP>] result [<SP> kv-pairs]
|
|
#
|
|
# The result code can be:
|
|
#
|
|
# OK store-id="..."
|
|
# Use the StoreID supplied in 'store-id='.
|
|
#
|
|
# ERR
|
|
# The default is to use HTTP request URL as the store ID.
|
|
#
|
|
# BH
|
|
# An internal error occured in the helper, preventing
|
|
# a result being identified.
|
|
#
|
|
#
|
|
# Helper programs should be prepared to receive and possibly ignore additional
|
|
# kv-pairs with keys they do not support.
|
|
#
|
|
# When using the concurrency= option the protocol is changed by
|
|
# introducing a query channel tag in front of the request/response.
|
|
# The query channel tag is a number between 0 and concurrency-1.
|
|
# This value must be echoed back unchanged to Squid as the first part
|
|
# of the response relating to its request.
|
|
#
|
|
# NOTE: when using StoreID refresh_pattern will apply to the StoreID
|
|
# returned from the helper and not the URL.
|
|
#
|
|
# WARNING: Wrong StoreID value returned by a careless helper may result
|
|
# in the wrong cached response returned to the user.
|
|
#
|
|
# By default, a StoreID helper is not used.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: store_id_children
|
|
# The maximum number of StoreID helper processes to spawn. If you limit
|
|
# it too few Squid will have to wait for them to process a backlog of
|
|
# requests, slowing it down. If you allow too many they will use RAM
|
|
# and other system resources noticably.
|
|
#
|
|
# The startup= and idle= options allow some measure of skew in your
|
|
# tuning.
|
|
#
|
|
# startup=
|
|
#
|
|
# Sets a minimum of how many processes are to be spawned when Squid
|
|
# starts or reconfigures. When set to zero the first request will
|
|
# cause spawning of the first child process to handle it.
|
|
#
|
|
# Starting too few will cause an initial slowdown in traffic as Squid
|
|
# attempts to simultaneously spawn enough processes to cope.
|
|
#
|
|
# idle=
|
|
#
|
|
# Sets a minimum of how many processes Squid is to try and keep available
|
|
# at all times. When traffic begins to rise above what the existing
|
|
# processes can handle this many more will be spawned up to the maximum
|
|
# configured. A minimum setting of 1 is required.
|
|
#
|
|
# concurrency=
|
|
#
|
|
# The number of requests each storeID helper can handle in
|
|
# parallel. Defaults to 0 which indicates the helper
|
|
# is a old-style single threaded program.
|
|
#
|
|
# When this directive is set to a value >= 1 then the protocol
|
|
# used to communicate with the helper is modified to include
|
|
# an ID in front of the request/response. The ID from the request
|
|
# must be echoed back with the response to that request.
|
|
#Default:
|
|
# store_id_children 20 startup=0 idle=1 concurrency=0
|
|
|
|
# TAG: store_id_access
|
|
# If defined, this access list specifies which requests are
|
|
# sent to the StoreID processes. By default all requests
|
|
# are sent.
|
|
#
|
|
# This clause supports both fast and slow acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Allow, unless rules exist in squid.conf.
|
|
|
|
# TAG: store_id_bypass
|
|
# When this is 'on', a request will not go through the
|
|
# helper if all helpers are busy. If this is 'off'
|
|
# and the helper queue grows too large, Squid will exit
|
|
# with a FATAL error and ask you to increase the number of
|
|
# helpers. You should only enable this if the helperss
|
|
# are not critical to your caching system. If you use
|
|
# helpers for critical caching components, and you enable this
|
|
# option, users may not get objects from cache.
|
|
#Default:
|
|
# store_id_bypass on
|
|
|
|
# OPTIONS FOR TUNING THE CACHE
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: cache
|
|
# A list of ACL elements which, if matched and denied, cause the request to
|
|
# not be satisfied from the cache and the reply to not be cached.
|
|
# In other words, use this to force certain objects to never be cached.
|
|
#
|
|
# You must use the words 'allow' or 'deny' to indicate whether items
|
|
# matching the ACL should be allowed or denied into the cache.
|
|
#
|
|
# This clause supports both fast and slow acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Allow caching, unless rules exist in squid.conf.
|
|
|
|
# TAG: max_stale time-units
|
|
# This option puts an upper limit on how stale content Squid
|
|
# will serve from the cache if cache validation fails.
|
|
# Can be overriden by the refresh_pattern max-stale option.
|
|
#Default:
|
|
# max_stale 1 week
|
|
|
|
# TAG: refresh_pattern
|
|
# usage: refresh_pattern [-i] regex min percent max [options]
|
|
#
|
|
# By default, regular expressions are CASE-SENSITIVE. To make
|
|
# them case-insensitive, use the -i option.
|
|
#
|
|
# 'Min' is the time (in minutes) an object without an explicit
|
|
# expiry time should be considered fresh. The recommended
|
|
# value is 0, any higher values may cause dynamic applications
|
|
# to be erroneously cached unless the application designer
|
|
# has taken the appropriate actions.
|
|
#
|
|
# 'Percent' is a percentage of the objects age (time since last
|
|
# modification age) an object without explicit expiry time
|
|
# will be considered fresh.
|
|
#
|
|
# 'Max' is an upper limit on how long objects without an explicit
|
|
# expiry time will be considered fresh.
|
|
#
|
|
# options: override-expire
|
|
# override-lastmod
|
|
# reload-into-ims
|
|
# ignore-reload
|
|
# ignore-no-store
|
|
# ignore-must-revalidate
|
|
# ignore-private
|
|
# ignore-auth
|
|
# max-stale=NN
|
|
# refresh-ims
|
|
# store-stale
|
|
#
|
|
# override-expire enforces min age even if the server
|
|
# sent an explicit expiry time (e.g., with the
|
|
# Expires: header or Cache-Control: max-age). Doing this
|
|
# VIOLATES the HTTP standard. Enabling this feature
|
|
# could make you liable for problems which it causes.
|
|
#
|
|
# Note: override-expire does not enforce staleness - it only extends
|
|
# freshness / min. If the server returns a Expires time which
|
|
# is longer than your max time, Squid will still consider
|
|
# the object fresh for that period of time.
|
|
#
|
|
# override-lastmod enforces min age even on objects
|
|
# that were modified recently.
|
|
#
|
|
# reload-into-ims changes a client no-cache or ``reload''
|
|
# request for a cached entry into a conditional request using
|
|
# If-Modified-Since and/or If-None-Match headers, provided the
|
|
# cached entry has a Last-Modified and/or a strong ETag header.
|
|
# Doing this VIOLATES the HTTP standard. Enabling this feature
|
|
# could make you liable for problems which it causes.
|
|
#
|
|
# ignore-reload ignores a client no-cache or ``reload''
|
|
# header. Doing this VIOLATES the HTTP standard. Enabling
|
|
# this feature could make you liable for problems which
|
|
# it causes.
|
|
#
|
|
# ignore-no-store ignores any ``Cache-control: no-store''
|
|
# headers received from a server. Doing this VIOLATES
|
|
# the HTTP standard. Enabling this feature could make you
|
|
# liable for problems which it causes.
|
|
#
|
|
# ignore-must-revalidate ignores any ``Cache-Control: must-revalidate``
|
|
# headers received from a server. Doing this VIOLATES
|
|
# the HTTP standard. Enabling this feature could make you
|
|
# liable for problems which it causes.
|
|
#
|
|
# ignore-private ignores any ``Cache-control: private''
|
|
# headers received from a server. Doing this VIOLATES
|
|
# the HTTP standard. Enabling this feature could make you
|
|
# liable for problems which it causes.
|
|
#
|
|
# ignore-auth caches responses to requests with authorization,
|
|
# as if the originserver had sent ``Cache-control: public''
|
|
# in the response header. Doing this VIOLATES the HTTP standard.
|
|
# Enabling this feature could make you liable for problems which
|
|
# it causes.
|
|
#
|
|
# refresh-ims causes squid to contact the origin server
|
|
# when a client issues an If-Modified-Since request. This
|
|
# ensures that the client will receive an updated version
|
|
# if one is available.
|
|
#
|
|
# store-stale stores responses even if they don't have explicit
|
|
# freshness or a validator (i.e., Last-Modified or an ETag)
|
|
# present, or if they're already stale. By default, Squid will
|
|
# not cache such responses because they usually can't be
|
|
# reused. Note that such responses will be stale by default.
|
|
#
|
|
# max-stale=NN provide a maximum staleness factor. Squid won't
|
|
# serve objects more stale than this even if it failed to
|
|
# validate the object. Default: use the max_stale global limit.
|
|
#
|
|
# Basically a cached object is:
|
|
#
|
|
# FRESH if expires < now, else STALE
|
|
# STALE if age > max
|
|
# FRESH if lm-factor < percent, else STALE
|
|
# FRESH if age < min
|
|
# else STALE
|
|
#
|
|
# The refresh_pattern lines are checked in the order listed here.
|
|
# The first entry which matches is used. If none of the entries
|
|
# match the default will be used.
|
|
#
|
|
# Note, you must uncomment all the default lines if you want
|
|
# to change one. The default setting is only active if none is
|
|
# used.
|
|
#
|
|
#
|
|
|
|
#
|
|
# Add any of your own refresh_pattern entries above these.
|
|
#
|
|
refresh_pattern ^ftp: 1440 20% 10080
|
|
refresh_pattern ^gopher: 1440 0% 1440
|
|
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
|
|
refresh_pattern . 0 20% 4320
|
|
|
|
# TAG: quick_abort_min (KB)
|
|
#Default:
|
|
# quick_abort_min 16 KB
|
|
|
|
# TAG: quick_abort_max (KB)
|
|
#Default:
|
|
# quick_abort_max 16 KB
|
|
|
|
# TAG: quick_abort_pct (percent)
|
|
# The cache by default continues downloading aborted requests
|
|
# which are almost completed (less than 16 KB remaining). This
|
|
# may be undesirable on slow (e.g. SLIP) links and/or very busy
|
|
# caches. Impatient users may tie up file descriptors and
|
|
# bandwidth by repeatedly requesting and immediately aborting
|
|
# downloads.
|
|
#
|
|
# When the user aborts a request, Squid will check the
|
|
# quick_abort values to the amount of data transferred until
|
|
# then.
|
|
#
|
|
# If the transfer has less than 'quick_abort_min' KB remaining,
|
|
# it will finish the retrieval.
|
|
#
|
|
# If the transfer has more than 'quick_abort_max' KB remaining,
|
|
# it will abort the retrieval.
|
|
#
|
|
# If more than 'quick_abort_pct' of the transfer has completed,
|
|
# it will finish the retrieval.
|
|
#
|
|
# If you do not want any retrieval to continue after the client
|
|
# has aborted, set both 'quick_abort_min' and 'quick_abort_max'
|
|
# to '0 KB'.
|
|
#
|
|
# If you want retrievals to always continue if they are being
|
|
# cached set 'quick_abort_min' to '-1 KB'.
|
|
#Default:
|
|
# quick_abort_pct 95
|
|
|
|
# TAG: read_ahead_gap buffer-size
|
|
# The amount of data the cache will buffer ahead of what has been
|
|
# sent to the client when retrieving an object from another server.
|
|
#Default:
|
|
# read_ahead_gap 16 KB
|
|
|
|
# TAG: negative_ttl time-units
|
|
# Set the Default Time-to-Live (TTL) for failed requests.
|
|
# Certain types of failures (such as "connection refused" and
|
|
# "404 Not Found") are able to be negatively-cached for a short time.
|
|
# Modern web servers should provide Expires: header, however if they
|
|
# do not this can provide a minimum TTL.
|
|
# The default is not to cache errors with unknown expiry details.
|
|
#
|
|
# Note that this is different from negative caching of DNS lookups.
|
|
#
|
|
# WARNING: Doing this VIOLATES the HTTP standard. Enabling
|
|
# this feature could make you liable for problems which it
|
|
# causes.
|
|
#Default:
|
|
# negative_ttl 0 seconds
|
|
|
|
# TAG: positive_dns_ttl time-units
|
|
# Upper limit on how long Squid will cache positive DNS responses.
|
|
# Default is 6 hours (360 minutes). This directive must be set
|
|
# larger than negative_dns_ttl.
|
|
#Default:
|
|
# positive_dns_ttl 6 hours
|
|
|
|
# TAG: negative_dns_ttl time-units
|
|
# Time-to-Live (TTL) for negative caching of failed DNS lookups.
|
|
# This also sets the lower cache limit on positive lookups.
|
|
# Minimum value is 1 second, and it is not recommendable to go
|
|
# much below 10 seconds.
|
|
#Default:
|
|
# negative_dns_ttl 1 minutes
|
|
|
|
# TAG: range_offset_limit size [acl acl...]
|
|
# usage: (size) [units] [[!]aclname]
|
|
#
|
|
# Sets an upper limit on how far (number of bytes) into the file
|
|
# a Range request may be to cause Squid to prefetch the whole file.
|
|
# If beyond this limit, Squid forwards the Range request as it is and
|
|
# the result is NOT cached.
|
|
#
|
|
# This is to stop a far ahead range request (lets say start at 17MB)
|
|
# from making Squid fetch the whole object up to that point before
|
|
# sending anything to the client.
|
|
#
|
|
# Multiple range_offset_limit lines may be specified, and they will
|
|
# be searched from top to bottom on each request until a match is found.
|
|
# The first match found will be used. If no line matches a request, the
|
|
# default limit of 0 bytes will be used.
|
|
#
|
|
# 'size' is the limit specified as a number of units.
|
|
#
|
|
# 'units' specifies whether to use bytes, KB, MB, etc.
|
|
# If no units are specified bytes are assumed.
|
|
#
|
|
# A size of 0 causes Squid to never fetch more than the
|
|
# client requested. (default)
|
|
#
|
|
# A size of 'none' causes Squid to always fetch the object from the
|
|
# beginning so it may cache the result. (2.0 style)
|
|
#
|
|
# 'aclname' is the name of a defined ACL.
|
|
#
|
|
# NP: Using 'none' as the byte value here will override any quick_abort settings
|
|
# that may otherwise apply to the range request. The range request will
|
|
# be fully fetched from start to finish regardless of the client
|
|
# actions. This affects bandwidth usage.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: minimum_expiry_time (seconds)
|
|
# The minimum caching time according to (Expires - Date)
|
|
# headers Squid honors if the object can't be revalidated.
|
|
# The default is 60 seconds.
|
|
#
|
|
# In reverse proxy environments it might be desirable to honor
|
|
# shorter object lifetimes. It is most likely better to make
|
|
# your server return a meaningful Last-Modified header however.
|
|
#
|
|
# In ESI environments where page fragments often have short
|
|
# lifetimes, this will often be best set to 0.
|
|
#Default:
|
|
# minimum_expiry_time 60 seconds
|
|
|
|
# TAG: store_avg_object_size (bytes)
|
|
# Average object size, used to estimate number of objects your
|
|
# cache can hold. The default is 13 KB.
|
|
#
|
|
# This is used to pre-seed the cache index memory allocation to
|
|
# reduce expensive reallocate operations while handling clients
|
|
# traffic. Too-large values may result in memory allocation during
|
|
# peak traffic, too-small values will result in wasted memory.
|
|
#
|
|
# Check the cache manager 'info' report metrics for the real
|
|
# object sizes seen by your Squid before tuning this.
|
|
#Default:
|
|
# store_avg_object_size 13 KB
|
|
|
|
# TAG: store_objects_per_bucket
|
|
# Target number of objects per bucket in the store hash table.
|
|
# Lowering this value increases the total number of buckets and
|
|
# also the storage maintenance rate. The default is 20.
|
|
#Default:
|
|
# store_objects_per_bucket 20
|
|
|
|
# HTTP OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: request_header_max_size (KB)
|
|
# This specifies the maximum size for HTTP headers in a request.
|
|
# Request headers are usually relatively small (about 512 bytes).
|
|
# Placing a limit on the request header size will catch certain
|
|
# bugs (for example with persistent connections) and possibly
|
|
# buffer-overflow or denial-of-service attacks.
|
|
#Default:
|
|
# request_header_max_size 64 KB
|
|
|
|
# TAG: reply_header_max_size (KB)
|
|
# This specifies the maximum size for HTTP headers in a reply.
|
|
# Reply headers are usually relatively small (about 512 bytes).
|
|
# Placing a limit on the reply header size will catch certain
|
|
# bugs (for example with persistent connections) and possibly
|
|
# buffer-overflow or denial-of-service attacks.
|
|
#Default:
|
|
# reply_header_max_size 64 KB
|
|
|
|
# TAG: request_body_max_size (bytes)
|
|
# This specifies the maximum size for an HTTP request body.
|
|
# In other words, the maximum size of a PUT/POST request.
|
|
# A user who attempts to send a request with a body larger
|
|
# than this limit receives an "Invalid Request" error message.
|
|
# If you set this parameter to a zero (the default), there will
|
|
# be no limit imposed.
|
|
#
|
|
# See also client_request_buffer_max_size for an alternative
|
|
# limitation on client uploads which can be configured.
|
|
#Default:
|
|
# No limit.
|
|
|
|
# TAG: client_request_buffer_max_size (bytes)
|
|
# This specifies the maximum buffer size of a client request.
|
|
# It prevents squid eating too much memory when somebody uploads
|
|
# a large file.
|
|
#Default:
|
|
# client_request_buffer_max_size 512 KB
|
|
|
|
# TAG: chunked_request_body_max_size (bytes)
|
|
# A broken or confused HTTP/1.1 client may send a chunked HTTP
|
|
# request to Squid. Squid does not have full support for that
|
|
# feature yet. To cope with such requests, Squid buffers the
|
|
# entire request and then dechunks request body to create a
|
|
# plain HTTP/1.0 request with a known content length. The plain
|
|
# request is then used by the rest of Squid code as usual.
|
|
#
|
|
# The option value specifies the maximum size of the buffer used
|
|
# to hold the request before the conversion. If the chunked
|
|
# request size exceeds the specified limit, the conversion
|
|
# fails, and the client receives an "unsupported request" error,
|
|
# as if dechunking was disabled.
|
|
#
|
|
# Dechunking is enabled by default. To disable conversion of
|
|
# chunked requests, set the maximum to zero.
|
|
#
|
|
# Request dechunking feature and this option in particular are a
|
|
# temporary hack. When chunking requests and responses are fully
|
|
# supported, there will be no need to buffer a chunked request.
|
|
#Default:
|
|
# chunked_request_body_max_size 64 KB
|
|
|
|
# TAG: broken_posts
|
|
# A list of ACL elements which, if matched, causes Squid to send
|
|
# an extra CRLF pair after the body of a PUT/POST request.
|
|
#
|
|
# Some HTTP servers has broken implementations of PUT/POST,
|
|
# and rely on an extra CRLF pair sent by some WWW clients.
|
|
#
|
|
# Quote from RFC2616 section 4.1 on this matter:
|
|
#
|
|
# Note: certain buggy HTTP/1.0 client implementations generate an
|
|
# extra CRLF's after a POST request. To restate what is explicitly
|
|
# forbidden by the BNF, an HTTP/1.1 client must not preface or follow
|
|
# a request with an extra CRLF.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
#Example:
|
|
# acl buggy_server url_regex ^http://....
|
|
# broken_posts allow buggy_server
|
|
#Default:
|
|
# Obey RFC 2616.
|
|
|
|
# TAG: adaptation_uses_indirect_client on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-follow-x-forwarded-for and (--enable-icap-client and/or --enable-ecap)
|
|
#
|
|
# Controls whether the indirect client IP address (instead of the direct
|
|
# client IP address) is passed to adaptation services.
|
|
#
|
|
# See also: follow_x_forwarded_for adaptation_send_client_ip
|
|
#Default:
|
|
# adaptation_uses_indirect_client on
|
|
|
|
# TAG: via on|off
|
|
# If set (default), Squid will include a Via header in requests and
|
|
# replies as required by RFC2616.
|
|
#Default:
|
|
# via on
|
|
|
|
# TAG: ie_refresh on|off
|
|
# Microsoft Internet Explorer up until version 5.5 Service
|
|
# Pack 1 has an issue with transparent proxies, wherein it
|
|
# is impossible to force a refresh. Turning this on provides
|
|
# a partial fix to the problem, by causing all IMS-REFRESH
|
|
# requests from older IE versions to check the origin server
|
|
# for fresh content. This reduces hit ratio by some amount
|
|
# (~10% in my experience), but allows users to actually get
|
|
# fresh content when they want it. Note because Squid
|
|
# cannot tell if the user is using 5.5 or 5.5SP1, the behavior
|
|
# of 5.5 is unchanged from old versions of Squid (i.e. a
|
|
# forced refresh is impossible). Newer versions of IE will,
|
|
# hopefully, continue to have the new behavior and will be
|
|
# handled based on that assumption. This option defaults to
|
|
# the old Squid behavior, which is better for hit ratios but
|
|
# worse for clients using IE, if they need to be able to
|
|
# force fresh content.
|
|
#Default:
|
|
# ie_refresh off
|
|
|
|
# TAG: vary_ignore_expire on|off
|
|
# Many HTTP servers supporting Vary gives such objects
|
|
# immediate expiry time with no cache-control header
|
|
# when requested by a HTTP/1.0 client. This option
|
|
# enables Squid to ignore such expiry times until
|
|
# HTTP/1.1 is fully implemented.
|
|
#
|
|
# WARNING: If turned on this may eventually cause some
|
|
# varying objects not intended for caching to get cached.
|
|
#Default:
|
|
# vary_ignore_expire off
|
|
|
|
# TAG: request_entities
|
|
# Squid defaults to deny GET and HEAD requests with request entities,
|
|
# as the meaning of such requests are undefined in the HTTP standard
|
|
# even if not explicitly forbidden.
|
|
#
|
|
# Set this directive to on if you have clients which insists
|
|
# on sending request entities in GET or HEAD requests. But be warned
|
|
# that there is server software (both proxies and web servers) which
|
|
# can fail to properly process this kind of request which may make you
|
|
# vulnerable to cache pollution attacks if enabled.
|
|
#Default:
|
|
# request_entities off
|
|
|
|
# TAG: request_header_access
|
|
# Usage: request_header_access header_name allow|deny [!]aclname ...
|
|
#
|
|
# WARNING: Doing this VIOLATES the HTTP standard. Enabling
|
|
# this feature could make you liable for problems which it
|
|
# causes.
|
|
#
|
|
# This option replaces the old 'anonymize_headers' and the
|
|
# older 'http_anonymizer' option with something that is much
|
|
# more configurable. A list of ACLs for each header name allows
|
|
# removal of specific header fields under specific conditions.
|
|
#
|
|
# This option only applies to outgoing HTTP request headers (i.e.,
|
|
# headers sent by Squid to the next HTTP hop such as a cache peer
|
|
# or an origin server). The option has no effect during cache hit
|
|
# detection. The equivalent adaptation vectoring point in ICAP
|
|
# terminology is post-cache REQMOD.
|
|
#
|
|
# The option is applied to individual outgoing request header
|
|
# fields. For each request header field F, Squid uses the first
|
|
# qualifying sets of request_header_access rules:
|
|
#
|
|
# 1. Rules with header_name equal to F's name.
|
|
# 2. Rules with header_name 'Other', provided F's name is not
|
|
# on the hard-coded list of commonly used HTTP header names.
|
|
# 3. Rules with header_name 'All'.
|
|
#
|
|
# Within that qualifying rule set, rule ACLs are checked as usual.
|
|
# If ACLs of an "allow" rule match, the header field is allowed to
|
|
# go through as is. If ACLs of a "deny" rule match, the header is
|
|
# removed and request_header_replace is then checked to identify
|
|
# if the removed header has a replacement. If no rules within the
|
|
# set have matching ACLs, the header field is left as is.
|
|
#
|
|
# For example, to achieve the same behavior as the old
|
|
# 'http_anonymizer standard' option, you should use:
|
|
#
|
|
# request_header_access From deny all
|
|
# request_header_access Referer deny all
|
|
# request_header_access User-Agent deny all
|
|
#
|
|
# Or, to reproduce the old 'http_anonymizer paranoid' feature
|
|
# you should use:
|
|
#
|
|
# request_header_access Authorization allow all
|
|
# request_header_access Proxy-Authorization allow all
|
|
# request_header_access Cache-Control allow all
|
|
# request_header_access Content-Length allow all
|
|
# request_header_access Content-Type allow all
|
|
# request_header_access Date allow all
|
|
# request_header_access Host allow all
|
|
# request_header_access If-Modified-Since allow all
|
|
# request_header_access Pragma allow all
|
|
# request_header_access Accept allow all
|
|
# request_header_access Accept-Charset allow all
|
|
# request_header_access Accept-Encoding allow all
|
|
# request_header_access Accept-Language allow all
|
|
# request_header_access Connection allow all
|
|
# request_header_access All deny all
|
|
#
|
|
# HTTP reply headers are controlled with the reply_header_access directive.
|
|
#
|
|
# By default, all headers are allowed (no anonymizing is performed).
|
|
#Default:
|
|
# No limits.
|
|
|
|
# TAG: reply_header_access
|
|
# Usage: reply_header_access header_name allow|deny [!]aclname ...
|
|
#
|
|
# WARNING: Doing this VIOLATES the HTTP standard. Enabling
|
|
# this feature could make you liable for problems which it
|
|
# causes.
|
|
#
|
|
# This option only applies to reply headers, i.e., from the
|
|
# server to the client.
|
|
#
|
|
# This is the same as request_header_access, but in the other
|
|
# direction. Please see request_header_access for detailed
|
|
# documentation.
|
|
#
|
|
# For example, to achieve the same behavior as the old
|
|
# 'http_anonymizer standard' option, you should use:
|
|
#
|
|
# reply_header_access Server deny all
|
|
# reply_header_access WWW-Authenticate deny all
|
|
# reply_header_access Link deny all
|
|
#
|
|
# Or, to reproduce the old 'http_anonymizer paranoid' feature
|
|
# you should use:
|
|
#
|
|
# reply_header_access Allow allow all
|
|
# reply_header_access WWW-Authenticate allow all
|
|
# reply_header_access Proxy-Authenticate allow all
|
|
# reply_header_access Cache-Control allow all
|
|
# reply_header_access Content-Encoding allow all
|
|
# reply_header_access Content-Length allow all
|
|
# reply_header_access Content-Type allow all
|
|
# reply_header_access Date allow all
|
|
# reply_header_access Expires allow all
|
|
# reply_header_access Last-Modified allow all
|
|
# reply_header_access Location allow all
|
|
# reply_header_access Pragma allow all
|
|
# reply_header_access Content-Language allow all
|
|
# reply_header_access Retry-After allow all
|
|
# reply_header_access Title allow all
|
|
# reply_header_access Content-Disposition allow all
|
|
# reply_header_access Connection allow all
|
|
# reply_header_access All deny all
|
|
#
|
|
# HTTP request headers are controlled with the request_header_access directive.
|
|
#
|
|
# By default, all headers are allowed (no anonymizing is
|
|
# performed).
|
|
#Default:
|
|
# No limits.
|
|
|
|
# TAG: request_header_replace
|
|
# Usage: request_header_replace header_name message
|
|
# Example: request_header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit)
|
|
#
|
|
# This option allows you to change the contents of headers
|
|
# denied with request_header_access above, by replacing them
|
|
# with some fixed string.
|
|
#
|
|
# This only applies to request headers, not reply headers.
|
|
#
|
|
# By default, headers are removed if denied.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: reply_header_replace
|
|
# Usage: reply_header_replace header_name message
|
|
# Example: reply_header_replace Server Foo/1.0
|
|
#
|
|
# This option allows you to change the contents of headers
|
|
# denied with reply_header_access above, by replacing them
|
|
# with some fixed string.
|
|
#
|
|
# This only applies to reply headers, not request headers.
|
|
#
|
|
# By default, headers are removed if denied.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: request_header_add
|
|
# Usage: request_header_add field-name field-value acl1 [acl2] ...
|
|
# Example: request_header_add X-Client-CA "CA=%ssl::>cert_issuer" all
|
|
#
|
|
# This option adds header fields to outgoing HTTP requests (i.e.,
|
|
# request headers sent by Squid to the next HTTP hop such as a
|
|
# cache peer or an origin server). The option has no effect during
|
|
# cache hit detection. The equivalent adaptation vectoring point
|
|
# in ICAP terminology is post-cache REQMOD.
|
|
#
|
|
# Field-name is a token specifying an HTTP header name. If a
|
|
# standard HTTP header name is used, Squid does not check whether
|
|
# the new header conflicts with any existing headers or violates
|
|
# HTTP rules. If the request to be modified already contains a
|
|
# field with the same name, the old field is preserved but the
|
|
# header field values are not merged.
|
|
#
|
|
# Field-value is either a token or a quoted string. If quoted
|
|
# string format is used, then the surrounding quotes are removed
|
|
# while escape sequences and %macros are processed.
|
|
#
|
|
# In theory, all of the logformat codes can be used as %macros.
|
|
# However, unlike logging (which happens at the very end of
|
|
# transaction lifetime), the transaction may not yet have enough
|
|
# information to expand a macro when the new header value is needed.
|
|
# And some information may already be available to Squid but not yet
|
|
# committed where the macro expansion code can access it (report
|
|
# such instances!). The macro will be expanded into a single dash
|
|
# ('-') in such cases. Not all macros have been tested.
|
|
#
|
|
# One or more Squid ACLs may be specified to restrict header
|
|
# injection to matching requests. As always in squid.conf, all
|
|
# ACLs in an option ACL list must be satisfied for the insertion
|
|
# to happen. The request_header_add option supports fast ACLs
|
|
# only.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: note
|
|
# This option used to log custom information about the master
|
|
# transaction. For example, an admin may configure Squid to log
|
|
# which "user group" the transaction belongs to, where "user group"
|
|
# will be determined based on a set of ACLs and not [just]
|
|
# authentication information.
|
|
# Values of key/value pairs can be logged using %{key}note macros:
|
|
#
|
|
# note key value acl ...
|
|
# logformat myFormat ... %{key}note ...
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: relaxed_header_parser on|off|warn
|
|
# In the default "on" setting Squid accepts certain forms
|
|
# of non-compliant HTTP messages where it is unambiguous
|
|
# what the sending application intended even if the message
|
|
# is not correctly formatted. The messages is then normalized
|
|
# to the correct form when forwarded by Squid.
|
|
#
|
|
# If set to "warn" then a warning will be emitted in cache.log
|
|
# each time such HTTP error is encountered.
|
|
#
|
|
# If set to "off" then such HTTP errors will cause the request
|
|
# or response to be rejected.
|
|
#Default:
|
|
# relaxed_header_parser on
|
|
|
|
# TIMEOUTS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: forward_timeout time-units
|
|
# This parameter specifies how long Squid should at most attempt in
|
|
# finding a forwarding path for the request before giving up.
|
|
#Default:
|
|
# forward_timeout 4 minutes
|
|
|
|
# TAG: connect_timeout time-units
|
|
# This parameter specifies how long to wait for the TCP connect to
|
|
# the requested server or peer to complete before Squid should
|
|
# attempt to find another path where to forward the request.
|
|
#Default:
|
|
# connect_timeout 1 minute
|
|
|
|
# TAG: peer_connect_timeout time-units
|
|
# This parameter specifies how long to wait for a pending TCP
|
|
# connection to a peer cache. The default is 30 seconds. You
|
|
# may also set different timeout values for individual neighbors
|
|
# with the 'connect-timeout' option on a 'cache_peer' line.
|
|
#Default:
|
|
# peer_connect_timeout 30 seconds
|
|
|
|
# TAG: read_timeout time-units
|
|
# The read_timeout is applied on server-side connections. After
|
|
# each successful read(), the timeout will be extended by this
|
|
# amount. If no data is read again after this amount of time,
|
|
# the request is aborted and logged with ERR_READ_TIMEOUT. The
|
|
# default is 15 minutes.
|
|
#Default:
|
|
# read_timeout 15 minutes
|
|
|
|
# TAG: write_timeout time-units
|
|
# This timeout is tracked for all connections that have data
|
|
# available for writing and are waiting for the socket to become
|
|
# ready. After each successful write, the timeout is extended by
|
|
# the configured amount. If Squid has data to write but the
|
|
# connection is not ready for the configured duration, the
|
|
# transaction associated with the connection is terminated. The
|
|
# default is 15 minutes.
|
|
#Default:
|
|
# write_timeout 15 minutes
|
|
|
|
# TAG: request_timeout
|
|
# How long to wait for complete HTTP request headers after initial
|
|
# connection establishment.
|
|
#Default:
|
|
# request_timeout 5 minutes
|
|
|
|
# TAG: client_idle_pconn_timeout
|
|
# How long to wait for the next HTTP request on a persistent
|
|
# client connection after the previous request completes.
|
|
#Default:
|
|
# client_idle_pconn_timeout 2 minutes
|
|
|
|
# TAG: client_lifetime time-units
|
|
# The maximum amount of time a client (browser) is allowed to
|
|
# remain connected to the cache process. This protects the Cache
|
|
# from having a lot of sockets (and hence file descriptors) tied up
|
|
# in a CLOSE_WAIT state from remote clients that go away without
|
|
# properly shutting down (either because of a network failure or
|
|
# because of a poor client implementation). The default is one
|
|
# day, 1440 minutes.
|
|
#
|
|
# NOTE: The default value is intended to be much larger than any
|
|
# client would ever need to be connected to your cache. You
|
|
# should probably change client_lifetime only as a last resort.
|
|
# If you seem to have many client connections tying up
|
|
# filedescriptors, we recommend first tuning the read_timeout,
|
|
# request_timeout, persistent_request_timeout and quick_abort values.
|
|
#Default:
|
|
# client_lifetime 1 day
|
|
|
|
# TAG: half_closed_clients
|
|
# Some clients may shutdown the sending side of their TCP
|
|
# connections, while leaving their receiving sides open. Sometimes,
|
|
# Squid can not tell the difference between a half-closed and a
|
|
# fully-closed TCP connection.
|
|
#
|
|
# By default, Squid will immediately close client connections when
|
|
# read(2) returns "no more data to read."
|
|
#
|
|
# Change this option to 'on' and Squid will keep open connections
|
|
# until a read(2) or write(2) on the socket returns an error.
|
|
# This may show some benefits for reverse proxies. But if not
|
|
# it is recommended to leave OFF.
|
|
#Default:
|
|
# half_closed_clients off
|
|
|
|
# TAG: server_idle_pconn_timeout
|
|
# Timeout for idle persistent connections to servers and other
|
|
# proxies.
|
|
#Default:
|
|
# server_idle_pconn_timeout 1 minute
|
|
|
|
# TAG: ident_timeout
|
|
# Maximum time to wait for IDENT lookups to complete.
|
|
#
|
|
# If this is too high, and you enabled IDENT lookups from untrusted
|
|
# users, you might be susceptible to denial-of-service by having
|
|
# many ident requests going at once.
|
|
#Default:
|
|
# ident_timeout 10 seconds
|
|
|
|
# TAG: shutdown_lifetime time-units
|
|
# When SIGTERM or SIGHUP is received, the cache is put into
|
|
# "shutdown pending" mode until all active sockets are closed.
|
|
# This value is the lifetime to set for all open descriptors
|
|
# during shutdown mode. Any active clients after this many
|
|
# seconds will receive a 'timeout' message.
|
|
#Default:
|
|
# shutdown_lifetime 30 seconds
|
|
|
|
# ADMINISTRATIVE PARAMETERS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: cache_mgr
|
|
# Email-address of local cache manager who will receive
|
|
# mail if the cache dies. The default is "webmaster".
|
|
#Default:
|
|
# cache_mgr webmaster
|
|
|
|
# TAG: mail_from
|
|
# From: email-address for mail sent when the cache dies.
|
|
# The default is to use 'squid@unique_hostname'.
|
|
#
|
|
# See also: unique_hostname directive.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: mail_program
|
|
# Email program used to send mail if the cache dies.
|
|
# The default is "mail". The specified program must comply
|
|
# with the standard Unix mail syntax:
|
|
# mail-program recipient < mailfile
|
|
#
|
|
# Optional command line options can be specified.
|
|
#Default:
|
|
# mail_program mail
|
|
|
|
# TAG: cache_effective_user
|
|
# If you start Squid as root, it will change its effective/real
|
|
# UID/GID to the user specified below. The default is to change
|
|
# to UID of nobody.
|
|
# see also; cache_effective_group
|
|
#Default:
|
|
# cache_effective_user nobody
|
|
|
|
# TAG: cache_effective_group
|
|
# Squid sets the GID to the effective user's default group ID
|
|
# (taken from the password file) and supplementary group list
|
|
# from the groups membership.
|
|
#
|
|
# If you want Squid to run with a specific GID regardless of
|
|
# the group memberships of the effective user then set this
|
|
# to the group (or GID) you want Squid to run as. When set
|
|
# all other group privileges of the effective user are ignored
|
|
# and only this GID is effective. If Squid is not started as
|
|
# root the user starting Squid MUST be member of the specified
|
|
# group.
|
|
#
|
|
# This option is not recommended by the Squid Team.
|
|
# Our preference is for administrators to configure a secure
|
|
# user account for squid with UID/GID matching system policies.
|
|
#Default:
|
|
# Use system group memberships of the cache_effective_user account
|
|
|
|
# TAG: httpd_suppress_version_string on|off
|
|
# Suppress Squid version string info in HTTP headers and HTML error pages.
|
|
#Default:
|
|
# httpd_suppress_version_string off
|
|
|
|
# TAG: visible_hostname
|
|
# If you want to present a special hostname in error messages, etc,
|
|
# define this. Otherwise, the return value of gethostname()
|
|
# will be used. If you have multiple caches in a cluster and
|
|
# get errors about IP-forwarding you must set them to have individual
|
|
# names with this setting.
|
|
#Default:
|
|
# Automatically detect the system host name
|
|
|
|
# TAG: unique_hostname
|
|
# If you want to have multiple machines with the same
|
|
# 'visible_hostname' you must give each machine a different
|
|
# 'unique_hostname' so forwarding loops can be detected.
|
|
#Default:
|
|
# Copy the value from visible_hostname
|
|
|
|
# TAG: hostname_aliases
|
|
# A list of other DNS names your cache has.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: umask
|
|
# Minimum umask which should be enforced while the proxy
|
|
# is running, in addition to the umask set at startup.
|
|
#
|
|
# For a traditional octal representation of umasks, start
|
|
# your value with 0.
|
|
#Default:
|
|
# umask 027
|
|
|
|
# OPTIONS FOR THE CACHE REGISTRATION SERVICE
|
|
# -----------------------------------------------------------------------------
|
|
#
|
|
# This section contains parameters for the (optional) cache
|
|
# announcement service. This service is provided to help
|
|
# cache administrators locate one another in order to join or
|
|
# create cache hierarchies.
|
|
#
|
|
# An 'announcement' message is sent (via UDP) to the registration
|
|
# service by Squid. By default, the announcement message is NOT
|
|
# SENT unless you enable it with 'announce_period' below.
|
|
#
|
|
# The announcement message includes your hostname, plus the
|
|
# following information from this configuration file:
|
|
#
|
|
# http_port
|
|
# icp_port
|
|
# cache_mgr
|
|
#
|
|
# All current information is processed regularly and made
|
|
# available on the Web at http://www.ircache.net/Cache/Tracker/.
|
|
|
|
# TAG: announce_period
|
|
# This is how frequently to send cache announcements.
|
|
#
|
|
# To enable announcing your cache, just set an announce period.
|
|
#
|
|
# Example:
|
|
# announce_period 1 day
|
|
#Default:
|
|
# Announcement messages disabled.
|
|
|
|
# TAG: announce_host
|
|
# Set the hostname where announce registration messages will be sent.
|
|
#
|
|
# See also announce_port and announce_file
|
|
#Default:
|
|
# announce_host tracker.ircache.net
|
|
|
|
# TAG: announce_file
|
|
# The contents of this file will be included in the announce
|
|
# registration messages.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: announce_port
|
|
# Set the port where announce registration messages will be sent.
|
|
#
|
|
# See also announce_host and announce_file
|
|
#Default:
|
|
# announce_port 3131
|
|
|
|
# HTTPD-ACCELERATOR OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: httpd_accel_surrogate_id
|
|
# Surrogates (http://www.esi.org/architecture_spec_1.0.html)
|
|
# need an identification token to allow control targeting. Because
|
|
# a farm of surrogates may all perform the same tasks, they may share
|
|
# an identification token.
|
|
#Default:
|
|
# visible_hostname is used if no specific ID is set.
|
|
|
|
# TAG: http_accel_surrogate_remote on|off
|
|
# Remote surrogates (such as those in a CDN) honour the header
|
|
# "Surrogate-Control: no-store-remote".
|
|
#
|
|
# Set this to on to have squid behave as a remote surrogate.
|
|
#Default:
|
|
# http_accel_surrogate_remote off
|
|
|
|
# TAG: esi_parser libxml2|expat|custom
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-esi
|
|
#
|
|
# ESI markup is not strictly XML compatible. The custom ESI parser
|
|
# will give higher performance, but cannot handle non ASCII character
|
|
# encodings.
|
|
#Default:
|
|
# esi_parser custom
|
|
|
|
# DELAY POOL PARAMETERS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: delay_pools
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
# This represents the number of delay pools to be used. For example,
|
|
# if you have one class 2 delay pool and one class 3 delays pool, you
|
|
# have a total of 2 delay pools.
|
|
#
|
|
# See also delay_parameters, delay_class, delay_access for pool
|
|
# configuration details.
|
|
#Default:
|
|
# delay_pools 0
|
|
|
|
# TAG: delay_class
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
# This defines the class of each delay pool. There must be exactly one
|
|
# delay_class line for each delay pool. For example, to define two
|
|
# delay pools, one of class 2 and one of class 3, the settings above
|
|
# and here would be:
|
|
#
|
|
# Example:
|
|
# delay_pools 4 # 4 delay pools
|
|
# delay_class 1 2 # pool 1 is a class 2 pool
|
|
# delay_class 2 3 # pool 2 is a class 3 pool
|
|
# delay_class 3 4 # pool 3 is a class 4 pool
|
|
# delay_class 4 5 # pool 4 is a class 5 pool
|
|
#
|
|
# The delay pool classes are:
|
|
#
|
|
# class 1 Everything is limited by a single aggregate
|
|
# bucket.
|
|
#
|
|
# class 2 Everything is limited by a single aggregate
|
|
# bucket as well as an "individual" bucket chosen
|
|
# from bits 25 through 32 of the IPv4 address.
|
|
#
|
|
# class 3 Everything is limited by a single aggregate
|
|
# bucket as well as a "network" bucket chosen
|
|
# from bits 17 through 24 of the IP address and a
|
|
# "individual" bucket chosen from bits 17 through
|
|
# 32 of the IPv4 address.
|
|
#
|
|
# class 4 Everything in a class 3 delay pool, with an
|
|
# additional limit on a per user basis. This
|
|
# only takes effect if the username is established
|
|
# in advance - by forcing authentication in your
|
|
# http_access rules.
|
|
#
|
|
# class 5 Requests are grouped according their tag (see
|
|
# external_acl's tag= reply).
|
|
#
|
|
#
|
|
# Each pool also requires a delay_parameters directive to configure the pool size
|
|
# and speed limits used whenever the pool is applied to a request. Along with
|
|
# a set of delay_access directives to determine when it is used.
|
|
#
|
|
# NOTE: If an IP address is a.b.c.d
|
|
# -> bits 25 through 32 are "d"
|
|
# -> bits 17 through 24 are "c"
|
|
# -> bits 17 through 32 are "c * 256 + d"
|
|
#
|
|
# NOTE-2: Due to the use of bitmasks in class 2,3,4 pools they only apply to
|
|
# IPv4 traffic. Class 1 and 5 pools may be used with IPv6 traffic.
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
# See also delay_parameters and delay_access.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: delay_access
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
# This is used to determine which delay pool a request falls into.
|
|
#
|
|
# delay_access is sorted per pool and the matching starts with pool 1,
|
|
# then pool 2, ..., and finally pool N. The first delay pool where the
|
|
# request is allowed is selected for the request. If it does not allow
|
|
# the request to any pool then the request is not delayed (default).
|
|
#
|
|
# For example, if you want some_big_clients in delay
|
|
# pool 1 and lotsa_little_clients in delay pool 2:
|
|
#
|
|
# delay_access 1 allow some_big_clients
|
|
# delay_access 1 deny all
|
|
# delay_access 2 allow lotsa_little_clients
|
|
# delay_access 2 deny all
|
|
# delay_access 3 allow authenticated_clients
|
|
#
|
|
# See also delay_parameters and delay_class.
|
|
#
|
|
#Default:
|
|
# Deny using the pool, unless allow rules exist in squid.conf for the pool.
|
|
|
|
# TAG: delay_parameters
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
# This defines the parameters for a delay pool. Each delay pool has
|
|
# a number of "buckets" associated with it, as explained in the
|
|
# description of delay_class.
|
|
#
|
|
# For a class 1 delay pool, the syntax is:
|
|
# delay_pools pool 1
|
|
# delay_parameters pool aggregate
|
|
#
|
|
# For a class 2 delay pool:
|
|
# delay_pools pool 2
|
|
# delay_parameters pool aggregate individual
|
|
#
|
|
# For a class 3 delay pool:
|
|
# delay_pools pool 3
|
|
# delay_parameters pool aggregate network individual
|
|
#
|
|
# For a class 4 delay pool:
|
|
# delay_pools pool 4
|
|
# delay_parameters pool aggregate network individual user
|
|
#
|
|
# For a class 5 delay pool:
|
|
# delay_pools pool 5
|
|
# delay_parameters pool tagrate
|
|
#
|
|
# The option variables are:
|
|
#
|
|
# pool a pool number - ie, a number between 1 and the
|
|
# number specified in delay_pools as used in
|
|
# delay_class lines.
|
|
#
|
|
# aggregate the speed limit parameters for the aggregate bucket
|
|
# (class 1, 2, 3).
|
|
#
|
|
# individual the speed limit parameters for the individual
|
|
# buckets (class 2, 3).
|
|
#
|
|
# network the speed limit parameters for the network buckets
|
|
# (class 3).
|
|
#
|
|
# user the speed limit parameters for the user buckets
|
|
# (class 4).
|
|
#
|
|
# tagrate the speed limit parameters for the tag buckets
|
|
# (class 5).
|
|
#
|
|
# A pair of delay parameters is written restore/maximum, where restore is
|
|
# the number of bytes (not bits - modem and network speeds are usually
|
|
# quoted in bits) per second placed into the bucket, and maximum is the
|
|
# maximum number of bytes which can be in the bucket at any time.
|
|
#
|
|
# There must be one delay_parameters line for each delay pool.
|
|
#
|
|
#
|
|
# For example, if delay pool number 1 is a class 2 delay pool as in the
|
|
# above example, and is being used to strictly limit each host to 64Kbit/sec
|
|
# (plus overheads), with no overall limit, the line is:
|
|
#
|
|
# delay_parameters 1 -1/-1 8000/8000
|
|
#
|
|
# Note that 8 x 8000 KByte/sec -> 64Kbit/sec.
|
|
#
|
|
# Note that the figure -1 is used to represent "unlimited".
|
|
#
|
|
#
|
|
# And, if delay pool number 2 is a class 3 delay pool as in the above
|
|
# example, and you want to limit it to a total of 256Kbit/sec (strict limit)
|
|
# with each 8-bit network permitted 64Kbit/sec (strict limit) and each
|
|
# individual host permitted 4800bit/sec with a bucket maximum size of 64Kbits
|
|
# to permit a decent web page to be downloaded at a decent speed
|
|
# (if the network is not being limited due to overuse) but slow down
|
|
# large downloads more significantly:
|
|
#
|
|
# delay_parameters 2 32000/32000 8000/8000 600/8000
|
|
#
|
|
# Note that 8 x 32000 KByte/sec -> 256Kbit/sec.
|
|
# 8 x 8000 KByte/sec -> 64Kbit/sec.
|
|
# 8 x 600 Byte/sec -> 4800bit/sec.
|
|
#
|
|
#
|
|
# Finally, for a class 4 delay pool as in the example - each user will
|
|
# be limited to 128Kbits/sec no matter how many workstations they are logged into.:
|
|
#
|
|
# delay_parameters 4 32000/32000 8000/8000 600/64000 16000/16000
|
|
#
|
|
#
|
|
# See also delay_class and delay_access.
|
|
#
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: delay_initial_bucket_level (percent, 0-100)
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
# The initial bucket percentage is used to determine how much is put
|
|
# in each bucket when squid starts, is reconfigured, or first notices
|
|
# a host accessing it (in class 2 and class 3, individual hosts and
|
|
# networks only have buckets associated with them once they have been
|
|
# "seen" by squid).
|
|
#Default:
|
|
# delay_initial_bucket_level 50
|
|
|
|
# CLIENT DELAY POOL PARAMETERS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: client_delay_pools
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
# This option specifies the number of client delay pools used. It must
|
|
# preceed other client_delay_* options.
|
|
#
|
|
# Example:
|
|
# client_delay_pools 2
|
|
#
|
|
# See also client_delay_parameters and client_delay_access.
|
|
#Default:
|
|
# client_delay_pools 0
|
|
|
|
# TAG: client_delay_initial_bucket_level (percent, 0-no_limit)
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
# This option determines the initial bucket size as a percentage of
|
|
# max_bucket_size from client_delay_parameters. Buckets are created
|
|
# at the time of the "first" connection from the matching IP. Idle
|
|
# buckets are periodically deleted up.
|
|
#
|
|
# You can specify more than 100 percent but note that such "oversized"
|
|
# buckets are not refilled until their size goes down to max_bucket_size
|
|
# from client_delay_parameters.
|
|
#
|
|
# Example:
|
|
# client_delay_initial_bucket_level 50
|
|
#Default:
|
|
# client_delay_initial_bucket_level 50
|
|
|
|
# TAG: client_delay_parameters
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
#
|
|
# This option configures client-side bandwidth limits using the
|
|
# following format:
|
|
#
|
|
# client_delay_parameters pool speed_limit max_bucket_size
|
|
#
|
|
# pool is an integer ID used for client_delay_access matching.
|
|
#
|
|
# speed_limit is bytes added to the bucket per second.
|
|
#
|
|
# max_bucket_size is the maximum size of a bucket, enforced after any
|
|
# speed_limit additions.
|
|
#
|
|
# Please see the delay_parameters option for more information and
|
|
# examples.
|
|
#
|
|
# Example:
|
|
# client_delay_parameters 1 1024 2048
|
|
# client_delay_parameters 2 51200 16384
|
|
#
|
|
# See also client_delay_access.
|
|
#
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: client_delay_access
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-delay-pools
|
|
#
|
|
# This option determines the client-side delay pool for the
|
|
# request:
|
|
#
|
|
# client_delay_access pool_ID allow|deny acl_name
|
|
#
|
|
# All client_delay_access options are checked in their pool ID
|
|
# order, starting with pool 1. The first checked pool with allowed
|
|
# request is selected for the request. If no ACL matches or there
|
|
# are no client_delay_access options, the request bandwidth is not
|
|
# limited.
|
|
#
|
|
# The ACL-selected pool is then used to find the
|
|
# client_delay_parameters for the request. Client-side pools are
|
|
# not used to aggregate clients. Clients are always aggregated
|
|
# based on their source IP addresses (one bucket per source IP).
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
# Additionally, only the client TCP connection details are available.
|
|
# ACLs testing HTTP properties will not work.
|
|
#
|
|
# Please see delay_access for more examples.
|
|
#
|
|
# Example:
|
|
# client_delay_access 1 allow low_rate_network
|
|
# client_delay_access 2 allow vips_network
|
|
#
|
|
#
|
|
# See also client_delay_parameters and client_delay_pools.
|
|
#Default:
|
|
# Deny use of the pool, unless allow rules exist in squid.conf for the pool.
|
|
|
|
# WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: wccp_router
|
|
# Use this option to define your WCCP ``home'' router for
|
|
# Squid.
|
|
#
|
|
# wccp_router supports a single WCCP(v1) router
|
|
#
|
|
# wccp2_router supports multiple WCCPv2 routers
|
|
#
|
|
# only one of the two may be used at the same time and defines
|
|
# which version of WCCP to use.
|
|
#Default:
|
|
# WCCP disabled.
|
|
|
|
# TAG: wccp2_router
|
|
# Use this option to define your WCCP ``home'' router for
|
|
# Squid.
|
|
#
|
|
# wccp_router supports a single WCCP(v1) router
|
|
#
|
|
# wccp2_router supports multiple WCCPv2 routers
|
|
#
|
|
# only one of the two may be used at the same time and defines
|
|
# which version of WCCP to use.
|
|
#Default:
|
|
# WCCPv2 disabled.
|
|
|
|
# TAG: wccp_version
|
|
# This directive is only relevant if you need to set up WCCP(v1)
|
|
# to some very old and end-of-life Cisco routers. In all other
|
|
# setups it must be left unset or at the default setting.
|
|
# It defines an internal version in the WCCP(v1) protocol,
|
|
# with version 4 being the officially documented protocol.
|
|
#
|
|
# According to some users, Cisco IOS 11.2 and earlier only
|
|
# support WCCP version 3. If you're using that or an earlier
|
|
# version of IOS, you may need to change this value to 3, otherwise
|
|
# do not specify this parameter.
|
|
#Default:
|
|
# wccp_version 4
|
|
|
|
# TAG: wccp2_rebuild_wait
|
|
# If this is enabled Squid will wait for the cache dir rebuild to finish
|
|
# before sending the first wccp2 HereIAm packet
|
|
#Default:
|
|
# wccp2_rebuild_wait on
|
|
|
|
# TAG: wccp2_forwarding_method
|
|
# WCCP2 allows the setting of forwarding methods between the
|
|
# router/switch and the cache. Valid values are as follows:
|
|
#
|
|
# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
|
|
# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
|
|
#
|
|
# Currently (as of IOS 12.4) cisco routers only support GRE.
|
|
# Cisco switches only support the L2 redirect assignment method.
|
|
#Default:
|
|
# wccp2_forwarding_method gre
|
|
|
|
# TAG: wccp2_return_method
|
|
# WCCP2 allows the setting of return methods between the
|
|
# router/switch and the cache for packets that the cache
|
|
# decides not to handle. Valid values are as follows:
|
|
#
|
|
# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
|
|
# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
|
|
#
|
|
# Currently (as of IOS 12.4) cisco routers only support GRE.
|
|
# Cisco switches only support the L2 redirect assignment.
|
|
#
|
|
# If the "ip wccp redirect exclude in" command has been
|
|
# enabled on the cache interface, then it is still safe for
|
|
# the proxy server to use a l2 redirect method even if this
|
|
# option is set to GRE.
|
|
#Default:
|
|
# wccp2_return_method gre
|
|
|
|
# TAG: wccp2_assignment_method
|
|
# WCCP2 allows the setting of methods to assign the WCCP hash
|
|
# Valid values are as follows:
|
|
#
|
|
# hash - Hash assignment
|
|
# mask - Mask assignment
|
|
#
|
|
# As a general rule, cisco routers support the hash assignment method
|
|
# and cisco switches support the mask assignment method.
|
|
#Default:
|
|
# wccp2_assignment_method hash
|
|
|
|
# TAG: wccp2_service
|
|
# WCCP2 allows for multiple traffic services. There are two
|
|
# types: "standard" and "dynamic". The standard type defines
|
|
# one service id - http (id 0). The dynamic service ids can be from
|
|
# 51 to 255 inclusive. In order to use a dynamic service id
|
|
# one must define the type of traffic to be redirected; this is done
|
|
# using the wccp2_service_info option.
|
|
#
|
|
# The "standard" type does not require a wccp2_service_info option,
|
|
# just specifying the service id will suffice.
|
|
#
|
|
# MD5 service authentication can be enabled by adding
|
|
# "password=<password>" to the end of this service declaration.
|
|
#
|
|
# Examples:
|
|
#
|
|
# wccp2_service standard 0 # for the 'web-cache' standard service
|
|
# wccp2_service dynamic 80 # a dynamic service type which will be
|
|
# # fleshed out with subsequent options.
|
|
# wccp2_service standard 0 password=foo
|
|
#Default:
|
|
# Use the 'web-cache' standard service.
|
|
|
|
# TAG: wccp2_service_info
|
|
# Dynamic WCCPv2 services require further information to define the
|
|
# traffic you wish to have diverted.
|
|
#
|
|
# The format is:
|
|
#
|
|
# wccp2_service_info <id> protocol=<protocol> flags=<flag>,<flag>..
|
|
# priority=<priority> ports=<port>,<port>..
|
|
#
|
|
# The relevant WCCPv2 flags:
|
|
# + src_ip_hash, dst_ip_hash
|
|
# + source_port_hash, dst_port_hash
|
|
# + src_ip_alt_hash, dst_ip_alt_hash
|
|
# + src_port_alt_hash, dst_port_alt_hash
|
|
# + ports_source
|
|
#
|
|
# The port list can be one to eight entries.
|
|
#
|
|
# Example:
|
|
#
|
|
# wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source
|
|
# priority=240 ports=80
|
|
#
|
|
# Note: the service id must have been defined by a previous
|
|
# 'wccp2_service dynamic <id>' entry.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: wccp2_weight
|
|
# Each cache server gets assigned a set of the destination
|
|
# hash proportional to their weight.
|
|
#Default:
|
|
# wccp2_weight 10000
|
|
|
|
# TAG: wccp_address
|
|
# Use this option if you require WCCPv2 to use a specific
|
|
# interface address.
|
|
#
|
|
# The default behavior is to not bind to any specific address.
|
|
#Default:
|
|
# Address selected by the operating system.
|
|
|
|
# TAG: wccp2_address
|
|
# Use this option if you require WCCP to use a specific
|
|
# interface address.
|
|
#
|
|
# The default behavior is to not bind to any specific address.
|
|
#Default:
|
|
# Address selected by the operating system.
|
|
|
|
# PERSISTENT CONNECTION HANDLING
|
|
# -----------------------------------------------------------------------------
|
|
#
|
|
# Also see "pconn_timeout" in the TIMEOUTS section
|
|
|
|
# TAG: client_persistent_connections
|
|
# Persistent connection support for clients.
|
|
# Squid uses persistent connections (when allowed). You can use
|
|
# this option to disable persistent connections with clients.
|
|
#Default:
|
|
# client_persistent_connections on
|
|
|
|
# TAG: server_persistent_connections
|
|
# Persistent connection support for servers.
|
|
# Squid uses persistent connections (when allowed). You can use
|
|
# this option to disable persistent connections with servers.
|
|
#Default:
|
|
# server_persistent_connections on
|
|
|
|
# TAG: persistent_connection_after_error
|
|
# With this directive the use of persistent connections after
|
|
# HTTP errors can be disabled. Useful if you have clients
|
|
# who fail to handle errors on persistent connections proper.
|
|
#Default:
|
|
# persistent_connection_after_error on
|
|
|
|
# TAG: detect_broken_pconn
|
|
# Some servers have been found to incorrectly signal the use
|
|
# of HTTP/1.0 persistent connections even on replies not
|
|
# compatible, causing significant delays. This server problem
|
|
# has mostly been seen on redirects.
|
|
#
|
|
# By enabling this directive Squid attempts to detect such
|
|
# broken replies and automatically assume the reply is finished
|
|
# after 10 seconds timeout.
|
|
#Default:
|
|
# detect_broken_pconn off
|
|
|
|
# CACHE DIGEST OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: digest_generation
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-cache-digests
|
|
#
|
|
# This controls whether the server will generate a Cache Digest
|
|
# of its contents. By default, Cache Digest generation is
|
|
# enabled if Squid is compiled with --enable-cache-digests defined.
|
|
#Default:
|
|
# digest_generation on
|
|
|
|
# TAG: digest_bits_per_entry
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-cache-digests
|
|
#
|
|
# This is the number of bits of the server's Cache Digest which
|
|
# will be associated with the Digest entry for a given HTTP
|
|
# Method and URL (public key) combination. The default is 5.
|
|
#Default:
|
|
# digest_bits_per_entry 5
|
|
|
|
# TAG: digest_rebuild_period (seconds)
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-cache-digests
|
|
#
|
|
# This is the wait time between Cache Digest rebuilds.
|
|
#Default:
|
|
# digest_rebuild_period 1 hour
|
|
|
|
# TAG: digest_rewrite_period (seconds)
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-cache-digests
|
|
#
|
|
# This is the wait time between Cache Digest writes to
|
|
# disk.
|
|
#Default:
|
|
# digest_rewrite_period 1 hour
|
|
|
|
# TAG: digest_swapout_chunk_size (bytes)
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-cache-digests
|
|
#
|
|
# This is the number of bytes of the Cache Digest to write to
|
|
# disk at a time. It defaults to 4096 bytes (4KB), the Squid
|
|
# default swap page.
|
|
#Default:
|
|
# digest_swapout_chunk_size 4096 bytes
|
|
|
|
# TAG: digest_rebuild_chunk_percentage (percent, 0-100)
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-cache-digests
|
|
#
|
|
# This is the percentage of the Cache Digest to be scanned at a
|
|
# time. By default it is set to 10% of the Cache Digest.
|
|
#Default:
|
|
# digest_rebuild_chunk_percentage 10
|
|
|
|
# SNMP OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: snmp_port
|
|
# The port number where Squid listens for SNMP requests. To enable
|
|
# SNMP support set this to a suitable port number. Port number
|
|
# 3401 is often used for the Squid SNMP agent. By default it's
|
|
# set to "0" (disabled)
|
|
#
|
|
# Example:
|
|
# snmp_port 3401
|
|
#Default:
|
|
# SNMP disabled.
|
|
|
|
# TAG: snmp_access
|
|
# Allowing or denying access to the SNMP port.
|
|
#
|
|
# All access to the agent is denied by default.
|
|
# usage:
|
|
#
|
|
# snmp_access allow|deny [!]aclname ...
|
|
#
|
|
# This clause only supports fast acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#
|
|
#Example:
|
|
# snmp_access allow snmppublic localhost
|
|
# snmp_access deny all
|
|
#Default:
|
|
# Deny, unless rules exist in squid.conf.
|
|
|
|
# TAG: snmp_incoming_address
|
|
# Just like 'udp_incoming_address', but for the SNMP port.
|
|
#
|
|
# snmp_incoming_address is used for the SNMP socket receiving
|
|
# messages from SNMP agents.
|
|
#
|
|
# The default snmp_incoming_address is to listen on all
|
|
# available network interfaces.
|
|
#Default:
|
|
# Accept SNMP packets from all machine interfaces.
|
|
|
|
# TAG: snmp_outgoing_address
|
|
# Just like 'udp_outgoing_address', but for the SNMP port.
|
|
#
|
|
# snmp_outgoing_address is used for SNMP packets returned to SNMP
|
|
# agents.
|
|
#
|
|
# If snmp_outgoing_address is not set it will use the same socket
|
|
# as snmp_incoming_address. Only change this if you want to have
|
|
# SNMP replies sent using another address than where this Squid
|
|
# listens for SNMP queries.
|
|
#
|
|
# NOTE, snmp_incoming_address and snmp_outgoing_address can not have
|
|
# the same value since they both use the same port.
|
|
#Default:
|
|
# Use snmp_incoming_address or an address selected by the operating system.
|
|
|
|
# ICP OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: icp_port
|
|
# The port number where Squid sends and receives ICP queries to
|
|
# and from neighbor caches. The standard UDP port for ICP is 3130.
|
|
#
|
|
# Example:
|
|
# icp_port 3130
|
|
#Default:
|
|
# ICP disabled.
|
|
|
|
# TAG: htcp_port
|
|
# The port number where Squid sends and receives HTCP queries to
|
|
# and from neighbor caches. To turn it on you want to set it to
|
|
# 4827.
|
|
#
|
|
# Example:
|
|
# htcp_port 4827
|
|
#Default:
|
|
# HTCP disabled.
|
|
|
|
# TAG: log_icp_queries on|off
|
|
# If set, ICP queries are logged to access.log. You may wish
|
|
# do disable this if your ICP load is VERY high to speed things
|
|
# up or to simplify log analysis.
|
|
#Default:
|
|
# log_icp_queries on
|
|
|
|
# TAG: udp_incoming_address
|
|
# udp_incoming_address is used for UDP packets received from other
|
|
# caches.
|
|
#
|
|
# The default behavior is to not bind to any specific address.
|
|
#
|
|
# Only change this if you want to have all UDP queries received on
|
|
# a specific interface/address.
|
|
#
|
|
# NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS
|
|
# modules. Altering it will affect all of them in the same manner.
|
|
#
|
|
# see also; udp_outgoing_address
|
|
#
|
|
# NOTE, udp_incoming_address and udp_outgoing_address can not
|
|
# have the same value since they both use the same port.
|
|
#Default:
|
|
# Accept packets from all machine interfaces.
|
|
|
|
# TAG: udp_outgoing_address
|
|
# udp_outgoing_address is used for UDP packets sent out to other
|
|
# caches.
|
|
#
|
|
# The default behavior is to not bind to any specific address.
|
|
#
|
|
# Instead it will use the same socket as udp_incoming_address.
|
|
# Only change this if you want to have UDP queries sent using another
|
|
# address than where this Squid listens for UDP queries from other
|
|
# caches.
|
|
#
|
|
# NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS
|
|
# modules. Altering it will affect all of them in the same manner.
|
|
#
|
|
# see also; udp_incoming_address
|
|
#
|
|
# NOTE, udp_incoming_address and udp_outgoing_address can not
|
|
# have the same value since they both use the same port.
|
|
#Default:
|
|
# Use udp_incoming_address or an address selected by the operating system.
|
|
|
|
# TAG: icp_hit_stale on|off
|
|
# If you want to return ICP_HIT for stale cache objects, set this
|
|
# option to 'on'. If you have sibling relationships with caches
|
|
# in other administrative domains, this should be 'off'. If you only
|
|
# have sibling relationships with caches under your control,
|
|
# it is probably okay to set this to 'on'.
|
|
# If set to 'on', your siblings should use the option "allow-miss"
|
|
# on their cache_peer lines for connecting to you.
|
|
#Default:
|
|
# icp_hit_stale off
|
|
|
|
# TAG: minimum_direct_hops
|
|
# If using the ICMP pinging stuff, do direct fetches for sites
|
|
# which are no more than this many hops away.
|
|
#Default:
|
|
# minimum_direct_hops 4
|
|
|
|
# TAG: minimum_direct_rtt (msec)
|
|
# If using the ICMP pinging stuff, do direct fetches for sites
|
|
# which are no more than this many rtt milliseconds away.
|
|
#Default:
|
|
# minimum_direct_rtt 400
|
|
|
|
# TAG: netdb_low
|
|
# The low water mark for the ICMP measurement database.
|
|
#
|
|
# Note: high watermark controlled by netdb_high directive.
|
|
#
|
|
# These watermarks are counts, not percents. The defaults are
|
|
# (low) 900 and (high) 1000. When the high water mark is
|
|
# reached, database entries will be deleted until the low
|
|
# mark is reached.
|
|
#Default:
|
|
# netdb_low 900
|
|
|
|
# TAG: netdb_high
|
|
# The high water mark for the ICMP measurement database.
|
|
#
|
|
# Note: low watermark controlled by netdb_low directive.
|
|
#
|
|
# These watermarks are counts, not percents. The defaults are
|
|
# (low) 900 and (high) 1000. When the high water mark is
|
|
# reached, database entries will be deleted until the low
|
|
# mark is reached.
|
|
#Default:
|
|
# netdb_high 1000
|
|
|
|
# TAG: netdb_ping_period
|
|
# The minimum period for measuring a site. There will be at
|
|
# least this much delay between successive pings to the same
|
|
# network. The default is five minutes.
|
|
#Default:
|
|
# netdb_ping_period 5 minutes
|
|
|
|
# TAG: query_icmp on|off
|
|
# If you want to ask your peers to include ICMP data in their ICP
|
|
# replies, enable this option.
|
|
#
|
|
# If your peer has configured Squid (during compilation) with
|
|
# '--enable-icmp' that peer will send ICMP pings to origin server
|
|
# sites of the URLs it receives. If you enable this option the
|
|
# ICP replies from that peer will include the ICMP data (if available).
|
|
# Then, when choosing a parent cache, Squid will choose the parent with
|
|
# the minimal RTT to the origin server. When this happens, the
|
|
# hierarchy field of the access.log will be
|
|
# "CLOSEST_PARENT_MISS". This option is off by default.
|
|
#Default:
|
|
# query_icmp off
|
|
|
|
# TAG: test_reachability on|off
|
|
# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
|
|
# instead of ICP_MISS if the target host is NOT in the ICMP
|
|
# database, or has a zero RTT.
|
|
#Default:
|
|
# test_reachability off
|
|
|
|
# TAG: icp_query_timeout (msec)
|
|
# Normally Squid will automatically determine an optimal ICP
|
|
# query timeout value based on the round-trip-time of recent ICP
|
|
# queries. If you want to override the value determined by
|
|
# Squid, set this 'icp_query_timeout' to a non-zero value. This
|
|
# value is specified in MILLISECONDS, so, to use a 2-second
|
|
# timeout (the old default), you would write:
|
|
#
|
|
# icp_query_timeout 2000
|
|
#Default:
|
|
# Dynamic detection.
|
|
|
|
# TAG: maximum_icp_query_timeout (msec)
|
|
# Normally the ICP query timeout is determined dynamically. But
|
|
# sometimes it can lead to very large values (say 5 seconds).
|
|
# Use this option to put an upper limit on the dynamic timeout
|
|
# value. Do NOT use this option to always use a fixed (instead
|
|
# of a dynamic) timeout value. To set a fixed timeout see the
|
|
# 'icp_query_timeout' directive.
|
|
#Default:
|
|
# maximum_icp_query_timeout 2000
|
|
|
|
# TAG: minimum_icp_query_timeout (msec)
|
|
# Normally the ICP query timeout is determined dynamically. But
|
|
# sometimes it can lead to very small timeouts, even lower than
|
|
# the normal latency variance on your link due to traffic.
|
|
# Use this option to put an lower limit on the dynamic timeout
|
|
# value. Do NOT use this option to always use a fixed (instead
|
|
# of a dynamic) timeout value. To set a fixed timeout see the
|
|
# 'icp_query_timeout' directive.
|
|
#Default:
|
|
# minimum_icp_query_timeout 5
|
|
|
|
# TAG: background_ping_rate time-units
|
|
# Controls how often the ICP pings are sent to siblings that
|
|
# have background-ping set.
|
|
#Default:
|
|
# background_ping_rate 10 seconds
|
|
|
|
# MULTICAST ICP OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: mcast_groups
|
|
# This tag specifies a list of multicast groups which your server
|
|
# should join to receive multicasted ICP queries.
|
|
#
|
|
# NOTE! Be very careful what you put here! Be sure you
|
|
# understand the difference between an ICP _query_ and an ICP
|
|
# _reply_. This option is to be set only if you want to RECEIVE
|
|
# multicast queries. Do NOT set this option to SEND multicast
|
|
# ICP (use cache_peer for that). ICP replies are always sent via
|
|
# unicast, so this option does not affect whether or not you will
|
|
# receive replies from multicast group members.
|
|
#
|
|
# You must be very careful to NOT use a multicast address which
|
|
# is already in use by another group of caches.
|
|
#
|
|
# If you are unsure about multicast, please read the Multicast
|
|
# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).
|
|
#
|
|
# Usage: mcast_groups 239.128.16.128 224.0.1.20
|
|
#
|
|
# By default, Squid doesn't listen on any multicast groups.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: mcast_miss_addr
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# -DMULTICAST_MISS_STREAM define
|
|
#
|
|
# If you enable this option, every "cache miss" URL will
|
|
# be sent out on the specified multicast address.
|
|
#
|
|
# Do not enable this option unless you are are absolutely
|
|
# certain you understand what you are doing.
|
|
#Default:
|
|
# disabled.
|
|
|
|
# TAG: mcast_miss_ttl
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# -DMULTICAST_MISS_STREAM define
|
|
#
|
|
# This is the time-to-live value for packets multicasted
|
|
# when multicasting off cache miss URLs is enabled. By
|
|
# default this is set to 'site scope', i.e. 16.
|
|
#Default:
|
|
# mcast_miss_ttl 16
|
|
|
|
# TAG: mcast_miss_port
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# -DMULTICAST_MISS_STREAM define
|
|
#
|
|
# This is the port number to be used in conjunction with
|
|
# 'mcast_miss_addr'.
|
|
#Default:
|
|
# mcast_miss_port 3135
|
|
|
|
# TAG: mcast_miss_encode_key
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# -DMULTICAST_MISS_STREAM define
|
|
#
|
|
# The URLs that are sent in the multicast miss stream are
|
|
# encrypted. This is the encryption key.
|
|
#Default:
|
|
# mcast_miss_encode_key XXXXXXXXXXXXXXXX
|
|
|
|
# TAG: mcast_icp_query_timeout (msec)
|
|
# For multicast peers, Squid regularly sends out ICP "probes" to
|
|
# count how many other peers are listening on the given multicast
|
|
# address. This value specifies how long Squid should wait to
|
|
# count all the replies. The default is 2000 msec, or 2
|
|
# seconds.
|
|
#Default:
|
|
# mcast_icp_query_timeout 2000
|
|
|
|
# INTERNAL ICON OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: icon_directory
|
|
# Where the icons are stored. These are normally kept in
|
|
# /usr/share/squid/icons
|
|
#Default:
|
|
# icon_directory /usr/share/squid/icons
|
|
|
|
# TAG: global_internal_static
|
|
# This directive controls is Squid should intercept all requests for
|
|
# /squid-internal-static/ no matter which host the URL is requesting
|
|
# (default on setting), or if nothing special should be done for
|
|
# such URLs (off setting). The purpose of this directive is to make
|
|
# icons etc work better in complex cache hierarchies where it may
|
|
# not always be possible for all corners in the cache mesh to reach
|
|
# the server generating a directory listing.
|
|
#Default:
|
|
# global_internal_static on
|
|
|
|
# TAG: short_icon_urls
|
|
# If this is enabled Squid will use short URLs for icons.
|
|
# If disabled it will revert to the old behavior of including
|
|
# it's own name and port in the URL.
|
|
#
|
|
# If you run a complex cache hierarchy with a mix of Squid and
|
|
# other proxies you may need to disable this directive.
|
|
#Default:
|
|
# short_icon_urls on
|
|
|
|
# ERROR PAGE OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: error_directory
|
|
# If you wish to create your own versions of the default
|
|
# error files to customize them to suit your company copy
|
|
# the error/template files to another directory and point
|
|
# this tag at them.
|
|
#
|
|
# WARNING: This option will disable multi-language support
|
|
# on error pages if used.
|
|
#
|
|
# The squid developers are interested in making squid available in
|
|
# a wide variety of languages. If you are making translations for a
|
|
# language that Squid does not currently provide please consider
|
|
# contributing your translation back to the project.
|
|
# http://wiki.squid-cache.org/Translations
|
|
#
|
|
# The squid developers working on translations are happy to supply drop-in
|
|
# translated error files in exchange for any new language contributions.
|
|
#Default:
|
|
# Send error pages in the clients preferred language
|
|
|
|
# TAG: error_default_language
|
|
# Set the default language which squid will send error pages in
|
|
# if no existing translation matches the clients language
|
|
# preferences.
|
|
#
|
|
# If unset (default) generic English will be used.
|
|
#
|
|
# The squid developers are interested in making squid available in
|
|
# a wide variety of languages. If you are interested in making
|
|
# translations for any language see the squid wiki for details.
|
|
# http://wiki.squid-cache.org/Translations
|
|
#Default:
|
|
# Generate English language pages.
|
|
|
|
# TAG: error_log_languages
|
|
# Log to cache.log what languages users are attempting to
|
|
# auto-negotiate for translations.
|
|
#
|
|
# Successful negotiations are not logged. Only failures
|
|
# have meaning to indicate that Squid may need an upgrade
|
|
# of its error page translations.
|
|
#Default:
|
|
# error_log_languages on
|
|
|
|
# TAG: err_page_stylesheet
|
|
# CSS Stylesheet to pattern the display of Squid default error pages.
|
|
#
|
|
# For information on CSS see http://www.w3.org/Style/CSS/
|
|
#Default:
|
|
# err_page_stylesheet /etc/squid/errorpage.css
|
|
|
|
# TAG: err_html_text
|
|
# HTML text to include in error messages. Make this a "mailto"
|
|
# URL to your admin address, or maybe just a link to your
|
|
# organizations Web page.
|
|
#
|
|
# To include this in your error messages, you must rewrite
|
|
# the error template files (found in the "errors" directory).
|
|
# Wherever you want the 'err_html_text' line to appear,
|
|
# insert a %L tag in the error template file.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: email_err_data on|off
|
|
# If enabled, information about the occurred error will be
|
|
# included in the mailto links of the ERR pages (if %W is set)
|
|
# so that the email body contains the data.
|
|
# Syntax is <A HREF="mailto:%w%W">%w</A>
|
|
#Default:
|
|
# email_err_data on
|
|
|
|
# TAG: deny_info
|
|
# Usage: deny_info err_page_name acl
|
|
# or deny_info http://... acl
|
|
# or deny_info TCP_RESET acl
|
|
#
|
|
# This can be used to return a ERR_ page for requests which
|
|
# do not pass the 'http_access' rules. Squid remembers the last
|
|
# acl it evaluated in http_access, and if a 'deny_info' line exists
|
|
# for that ACL Squid returns a corresponding error page.
|
|
#
|
|
# The acl is typically the last acl on the http_access deny line which
|
|
# denied access. The exceptions to this rule are:
|
|
# - When Squid needs to request authentication credentials. It's then
|
|
# the first authentication related acl encountered
|
|
# - When none of the http_access lines matches. It's then the last
|
|
# acl processed on the last http_access line.
|
|
# - When the decision to deny access was made by an adaptation service,
|
|
# the acl name is the corresponding eCAP or ICAP service_name.
|
|
#
|
|
# NP: If providing your own custom error pages with error_directory
|
|
# you may also specify them by your custom file name:
|
|
# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
|
|
#
|
|
# By defaut Squid will send "403 Forbidden". A different 4xx or 5xx
|
|
# may be specified by prefixing the file name with the code and a colon.
|
|
# e.g. 404:ERR_CUSTOM_ACCESS_DENIED
|
|
#
|
|
# Alternatively you can tell Squid to reset the TCP connection
|
|
# by specifying TCP_RESET.
|
|
#
|
|
# Or you can specify an error URL or URL pattern. The browsers will
|
|
# get redirected to the specified URL after formatting tags have
|
|
# been replaced. Redirect will be done with 302 or 307 according to
|
|
# HTTP/1.1 specs. A different 3xx code may be specified by prefixing
|
|
# the URL. e.g. 303:http://example.com/
|
|
#
|
|
# URL FORMAT TAGS:
|
|
# %a - username (if available. Password NOT included)
|
|
# %B - FTP path URL
|
|
# %e - Error number
|
|
# %E - Error description
|
|
# %h - Squid hostname
|
|
# %H - Request domain name
|
|
# %i - Client IP Address
|
|
# %M - Request Method
|
|
# %o - Message result from external ACL helper
|
|
# %p - Request Port number
|
|
# %P - Request Protocol name
|
|
# %R - Request URL path
|
|
# %T - Timestamp in RFC 1123 format
|
|
# %U - Full canonical URL from client
|
|
# (HTTPS URLs terminate with *)
|
|
# %u - Full canonical URL from client
|
|
# %w - Admin email from squid.conf
|
|
# %x - Error name
|
|
# %% - Literal percent (%) code
|
|
#
|
|
#Default:
|
|
# none
|
|
|
|
# OPTIONS INFLUENCING REQUEST FORWARDING
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: nonhierarchical_direct
|
|
# By default, Squid will send any non-hierarchical requests
|
|
# (matching hierarchy_stoplist or not cacheable request type) direct
|
|
# to origin servers.
|
|
#
|
|
# When this is set to "off", Squid will prefer to send these
|
|
# requests to parents.
|
|
#
|
|
# Note that in most configurations, by turning this off you will only
|
|
# add latency to these request without any improvement in global hit
|
|
# ratio.
|
|
#
|
|
# This option only sets a preference. If the parent is unavailable a
|
|
# direct connection to the origin server may still be attempted. To
|
|
# completely prevent direct connections use never_direct.
|
|
#Default:
|
|
# nonhierarchical_direct on
|
|
|
|
# TAG: prefer_direct
|
|
# Normally Squid tries to use parents for most requests. If you for some
|
|
# reason like it to first try going direct and only use a parent if
|
|
# going direct fails set this to on.
|
|
#
|
|
# By combining nonhierarchical_direct off and prefer_direct on you
|
|
# can set up Squid to use a parent as a backup path if going direct
|
|
# fails.
|
|
#
|
|
# Note: If you want Squid to use parents for all requests see
|
|
# the never_direct directive. prefer_direct only modifies how Squid
|
|
# acts on cacheable requests.
|
|
#Default:
|
|
# prefer_direct off
|
|
|
|
# TAG: cache_miss_revalidate on|off
|
|
# RFC 7232 defines a conditional request mechanism to prevent
|
|
# response objects being unnecessarily transferred over the network.
|
|
# If that mechanism is used by the client and a cache MISS occurs
|
|
# it can prevent new cache entries being created.
|
|
#
|
|
# This option determines whether Squid on cache MISS will pass the
|
|
# client revalidation request to the server or tries to fetch new
|
|
# content for caching. It can be useful while the cache is mostly
|
|
# empty to more quickly have the cache populated by generating
|
|
# non-conditional GETs.
|
|
#
|
|
# When set to 'on' (default), Squid will pass all client If-* headers
|
|
# to the server. This permits server responses without a cacheable
|
|
# payload to be delivered and on MISS no new cache entry is created.
|
|
#
|
|
# When set to 'off' and if the request is cacheable, Squid will
|
|
# remove the clients If-Modified-Since and If-None-Match headers from
|
|
# the request sent to the server. This requests a 200 status response
|
|
# from the server to create a new cache entry with.
|
|
#Default:
|
|
# cache_miss_revalidate on
|
|
|
|
# TAG: always_direct
|
|
# Usage: always_direct allow|deny [!]aclname ...
|
|
#
|
|
# Here you can use ACL elements to specify requests which should
|
|
# ALWAYS be forwarded by Squid to the origin servers without using
|
|
# any peers. For example, to always directly forward requests for
|
|
# local servers ignoring any parents or siblings you may have use
|
|
# something like:
|
|
#
|
|
# acl local-servers dstdomain my.domain.net
|
|
# always_direct allow local-servers
|
|
#
|
|
# To always forward FTP requests directly, use
|
|
#
|
|
# acl FTP proto FTP
|
|
# always_direct allow FTP
|
|
#
|
|
# NOTE: There is a similar, but opposite option named
|
|
# 'never_direct'. You need to be aware that "always_direct deny
|
|
# foo" is NOT the same thing as "never_direct allow foo". You
|
|
# may need to use a deny rule to exclude a more-specific case of
|
|
# some other rule. Example:
|
|
#
|
|
# acl local-external dstdomain external.foo.net
|
|
# acl local-servers dstdomain .foo.net
|
|
# always_direct deny local-external
|
|
# always_direct allow local-servers
|
|
#
|
|
# NOTE: If your goal is to make the client forward the request
|
|
# directly to the origin server bypassing Squid then this needs
|
|
# to be done in the client configuration. Squid configuration
|
|
# can only tell Squid how Squid should fetch the object.
|
|
#
|
|
# NOTE: This directive is not related to caching. The replies
|
|
# is cached as usual even if you use always_direct. To not cache
|
|
# the replies see the 'cache' directive.
|
|
#
|
|
# This clause supports both fast and slow acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Prevent any cache_peer being used for this request.
|
|
|
|
# TAG: never_direct
|
|
# Usage: never_direct allow|deny [!]aclname ...
|
|
#
|
|
# never_direct is the opposite of always_direct. Please read
|
|
# the description for always_direct if you have not already.
|
|
#
|
|
# With 'never_direct' you can use ACL elements to specify
|
|
# requests which should NEVER be forwarded directly to origin
|
|
# servers. For example, to force the use of a proxy for all
|
|
# requests, except those in your local domain use something like:
|
|
#
|
|
# acl local-servers dstdomain .foo.net
|
|
# never_direct deny local-servers
|
|
# never_direct allow all
|
|
#
|
|
# or if Squid is inside a firewall and there are local intranet
|
|
# servers inside the firewall use something like:
|
|
#
|
|
# acl local-intranet dstdomain .foo.net
|
|
# acl local-external dstdomain external.foo.net
|
|
# always_direct deny local-external
|
|
# always_direct allow local-intranet
|
|
# never_direct allow all
|
|
#
|
|
# This clause supports both fast and slow acl types.
|
|
# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
|
|
#Default:
|
|
# Allow DNS results to be used for this request.
|
|
|
|
# ADVANCED NETWORKING OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: incoming_udp_average
|
|
# Heavy voodoo here. I can't even believe you are reading this.
|
|
# Are you crazy? Don't even think about adjusting these unless
|
|
# you understand the algorithms in comm_select.c first!
|
|
#Default:
|
|
# incoming_udp_average 6
|
|
|
|
# TAG: incoming_tcp_average
|
|
# Heavy voodoo here. I can't even believe you are reading this.
|
|
# Are you crazy? Don't even think about adjusting these unless
|
|
# you understand the algorithms in comm_select.c first!
|
|
#Default:
|
|
# incoming_tcp_average 4
|
|
|
|
# TAG: incoming_dns_average
|
|
# Heavy voodoo here. I can't even believe you are reading this.
|
|
# Are you crazy? Don't even think about adjusting these unless
|
|
# you understand the algorithms in comm_select.c first!
|
|
#Default:
|
|
# incoming_dns_average 4
|
|
|
|
# TAG: min_udp_poll_cnt
|
|
# Heavy voodoo here. I can't even believe you are reading this.
|
|
# Are you crazy? Don't even think about adjusting these unless
|
|
# you understand the algorithms in comm_select.c first!
|
|
#Default:
|
|
# min_udp_poll_cnt 8
|
|
|
|
# TAG: min_dns_poll_cnt
|
|
# Heavy voodoo here. I can't even believe you are reading this.
|
|
# Are you crazy? Don't even think about adjusting these unless
|
|
# you understand the algorithms in comm_select.c first!
|
|
#Default:
|
|
# min_dns_poll_cnt 8
|
|
|
|
# TAG: min_tcp_poll_cnt
|
|
# Heavy voodoo here. I can't even believe you are reading this.
|
|
# Are you crazy? Don't even think about adjusting these unless
|
|
# you understand the algorithms in comm_select.c first!
|
|
#Default:
|
|
# min_tcp_poll_cnt 8
|
|
|
|
# TAG: accept_filter
|
|
# FreeBSD:
|
|
#
|
|
# The name of an accept(2) filter to install on Squid's
|
|
# listen socket(s). This feature is perhaps specific to
|
|
# FreeBSD and requires support in the kernel.
|
|
#
|
|
# The 'httpready' filter delays delivering new connections
|
|
# to Squid until a full HTTP request has been received.
|
|
# See the accf_http(9) man page for details.
|
|
#
|
|
# The 'dataready' filter delays delivering new connections
|
|
# to Squid until there is some data to process.
|
|
# See the accf_dataready(9) man page for details.
|
|
#
|
|
# Linux:
|
|
#
|
|
# The 'data' filter delays delivering of new connections
|
|
# to Squid until there is some data to process by TCP_ACCEPT_DEFER.
|
|
# You may optionally specify a number of seconds to wait by
|
|
# 'data=N' where N is the number of seconds. Defaults to 30
|
|
# if not specified. See the tcp(7) man page for details.
|
|
#EXAMPLE:
|
|
## FreeBSD
|
|
#accept_filter httpready
|
|
## Linux
|
|
#accept_filter data
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: client_ip_max_connections
|
|
# Set an absolute limit on the number of connections a single
|
|
# client IP can use. Any more than this and Squid will begin to drop
|
|
# new connections from the client until it closes some links.
|
|
#
|
|
# Note that this is a global limit. It affects all HTTP, HTCP, Gopher and FTP
|
|
# connections from the client. For finer control use the ACL access controls.
|
|
#
|
|
# Requires client_db to be enabled (the default).
|
|
#
|
|
# WARNING: This may noticably slow down traffic received via external proxies
|
|
# or NAT devices and cause them to rebound error messages back to their clients.
|
|
#Default:
|
|
# No limit.
|
|
|
|
# TAG: tcp_recv_bufsize (bytes)
|
|
# Size of receive buffer to set for TCP sockets. Probably just
|
|
# as easy to change your kernel's default.
|
|
# Omit from squid.conf to use the default buffer size.
|
|
#Default:
|
|
# Use operating system TCP defaults.
|
|
|
|
# ICAP OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: icap_enable on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# If you want to enable the ICAP module support, set this to on.
|
|
#Default:
|
|
# icap_enable off
|
|
|
|
# TAG: icap_connect_timeout
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# This parameter specifies how long to wait for the TCP connect to
|
|
# the requested ICAP server to complete before giving up and either
|
|
# terminating the HTTP transaction or bypassing the failure.
|
|
#
|
|
# The default for optional services is peer_connect_timeout.
|
|
# The default for essential services is connect_timeout.
|
|
# If this option is explicitly set, its value applies to all services.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: icap_io_timeout time-units
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# This parameter specifies how long to wait for an I/O activity on
|
|
# an established, active ICAP connection before giving up and
|
|
# either terminating the HTTP transaction or bypassing the
|
|
# failure.
|
|
#Default:
|
|
# Use read_timeout.
|
|
|
|
# TAG: icap_service_failure_limit limit [in memory-depth time-units]
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# The limit specifies the number of failures that Squid tolerates
|
|
# when establishing a new TCP connection with an ICAP service. If
|
|
# the number of failures exceeds the limit, the ICAP service is
|
|
# not used for new ICAP requests until it is time to refresh its
|
|
# OPTIONS.
|
|
#
|
|
# A negative value disables the limit. Without the limit, an ICAP
|
|
# service will not be considered down due to connectivity failures
|
|
# between ICAP OPTIONS requests.
|
|
#
|
|
# Squid forgets ICAP service failures older than the specified
|
|
# value of memory-depth. The memory fading algorithm
|
|
# is approximate because Squid does not remember individual
|
|
# errors but groups them instead, splitting the option
|
|
# value into ten time slots of equal length.
|
|
#
|
|
# When memory-depth is 0 and by default this option has no
|
|
# effect on service failure expiration.
|
|
#
|
|
# Squid always forgets failures when updating service settings
|
|
# using an ICAP OPTIONS transaction, regardless of this option
|
|
# setting.
|
|
#
|
|
# For example,
|
|
# # suspend service usage after 10 failures in 5 seconds:
|
|
# icap_service_failure_limit 10 in 5 seconds
|
|
#Default:
|
|
# icap_service_failure_limit 10
|
|
|
|
# TAG: icap_service_revival_delay
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# The delay specifies the number of seconds to wait after an ICAP
|
|
# OPTIONS request failure before requesting the options again. The
|
|
# failed ICAP service is considered "down" until fresh OPTIONS are
|
|
# fetched.
|
|
#
|
|
# The actual delay cannot be smaller than the hardcoded minimum
|
|
# delay of 30 seconds.
|
|
#Default:
|
|
# icap_service_revival_delay 180
|
|
|
|
# TAG: icap_preview_enable on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# The ICAP Preview feature allows the ICAP server to handle the
|
|
# HTTP message by looking only at the beginning of the message body
|
|
# or even without receiving the body at all. In some environments,
|
|
# previews greatly speedup ICAP processing.
|
|
#
|
|
# During an ICAP OPTIONS transaction, the server may tell Squid what
|
|
# HTTP messages should be previewed and how big the preview should be.
|
|
# Squid will not use Preview if the server did not request one.
|
|
#
|
|
# To disable ICAP Preview for all ICAP services, regardless of
|
|
# individual ICAP server OPTIONS responses, set this option to "off".
|
|
#Example:
|
|
#icap_preview_enable off
|
|
#Default:
|
|
# icap_preview_enable on
|
|
|
|
# TAG: icap_preview_size
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# The default size of preview data to be sent to the ICAP server.
|
|
# This value might be overwritten on a per server basis by OPTIONS requests.
|
|
#Default:
|
|
# No preview sent.
|
|
|
|
# TAG: icap_206_enable on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# 206 (Partial Content) responses is an ICAP extension that allows the
|
|
# ICAP agents to optionally combine adapted and original HTTP message
|
|
# content. The decision to combine is postponed until the end of the
|
|
# ICAP response. Squid supports Partial Content extension by default.
|
|
#
|
|
# Activation of the Partial Content extension is negotiated with each
|
|
# ICAP service during OPTIONS exchange. Most ICAP servers should handle
|
|
# negotation correctly even if they do not support the extension, but
|
|
# some might fail. To disable Partial Content support for all ICAP
|
|
# services and to avoid any negotiation, set this option to "off".
|
|
#
|
|
# Example:
|
|
# icap_206_enable off
|
|
#Default:
|
|
# icap_206_enable on
|
|
|
|
# TAG: icap_default_options_ttl
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# The default TTL value for ICAP OPTIONS responses that don't have
|
|
# an Options-TTL header.
|
|
#Default:
|
|
# icap_default_options_ttl 60
|
|
|
|
# TAG: icap_persistent_connections on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# Whether or not Squid should use persistent connections to
|
|
# an ICAP server.
|
|
#Default:
|
|
# icap_persistent_connections on
|
|
|
|
# TAG: adaptation_send_client_ip on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap or --enable-icap-client
|
|
#
|
|
# If enabled, Squid shares HTTP client IP information with adaptation
|
|
# services. For ICAP, Squid adds the X-Client-IP header to ICAP requests.
|
|
# For eCAP, Squid sets the libecap::metaClientIp transaction option.
|
|
#
|
|
# See also: adaptation_uses_indirect_client
|
|
#Default:
|
|
# adaptation_send_client_ip off
|
|
|
|
# TAG: adaptation_send_username on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap or --enable-icap-client
|
|
#
|
|
# This sends authenticated HTTP client username (if available) to
|
|
# the adaptation service.
|
|
#
|
|
# For ICAP, the username value is encoded based on the
|
|
# icap_client_username_encode option and is sent using the header
|
|
# specified by the icap_client_username_header option.
|
|
#Default:
|
|
# adaptation_send_username off
|
|
|
|
# TAG: icap_client_username_header
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# ICAP request header name to use for adaptation_send_username.
|
|
#Default:
|
|
# icap_client_username_header X-Client-Username
|
|
|
|
# TAG: icap_client_username_encode on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# Whether to base64 encode the authenticated client username.
|
|
#Default:
|
|
# icap_client_username_encode off
|
|
|
|
# TAG: icap_service
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# Defines a single ICAP service using the following format:
|
|
#
|
|
# icap_service id vectoring_point uri [option ...]
|
|
#
|
|
# id: ID
|
|
# an opaque identifier or name which is used to direct traffic to
|
|
# this specific service. Must be unique among all adaptation
|
|
# services in squid.conf.
|
|
#
|
|
# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache
|
|
# This specifies at which point of transaction processing the
|
|
# ICAP service should be activated. *_postcache vectoring points
|
|
# are not yet supported.
|
|
#
|
|
# uri: icap://servername:port/servicepath
|
|
# ICAP server and service location.
|
|
#
|
|
# ICAP does not allow a single service to handle both REQMOD and RESPMOD
|
|
# transactions. Squid does not enforce that requirement. You can specify
|
|
# services with the same service_url and different vectoring_points. You
|
|
# can even specify multiple identical services as long as their
|
|
# service_names differ.
|
|
#
|
|
# To activate a service, use the adaptation_access directive. To group
|
|
# services, use adaptation_service_chain and adaptation_service_set.
|
|
#
|
|
# Service options are separated by white space. ICAP services support
|
|
# the following name=value options:
|
|
#
|
|
# bypass=on|off|1|0
|
|
# If set to 'on' or '1', the ICAP service is treated as
|
|
# optional. If the service cannot be reached or malfunctions,
|
|
# Squid will try to ignore any errors and process the message as
|
|
# if the service was not enabled. No all ICAP errors can be
|
|
# bypassed. If set to 0, the ICAP service is treated as
|
|
# essential and all ICAP errors will result in an error page
|
|
# returned to the HTTP client.
|
|
#
|
|
# Bypass is off by default: services are treated as essential.
|
|
#
|
|
# routing=on|off|1|0
|
|
# If set to 'on' or '1', the ICAP service is allowed to
|
|
# dynamically change the current message adaptation plan by
|
|
# returning a chain of services to be used next. The services
|
|
# are specified using the X-Next-Services ICAP response header
|
|
# value, formatted as a comma-separated list of service names.
|
|
# Each named service should be configured in squid.conf. Other
|
|
# services are ignored. An empty X-Next-Services value results
|
|
# in an empty plan which ends the current adaptation.
|
|
#
|
|
# Dynamic adaptation plan may cross or cover multiple supported
|
|
# vectoring points in their natural processing order.
|
|
#
|
|
# Routing is not allowed by default: the ICAP X-Next-Services
|
|
# response header is ignored.
|
|
#
|
|
# ipv6=on|off
|
|
# Only has effect on split-stack systems. The default on those systems
|
|
# is to use IPv4-only connections. When set to 'on' this option will
|
|
# make Squid use IPv6-only connections to contact this ICAP service.
|
|
#
|
|
# on-overload=block|bypass|wait|force
|
|
# If the service Max-Connections limit has been reached, do
|
|
# one of the following for each new ICAP transaction:
|
|
# * block: send an HTTP error response to the client
|
|
# * bypass: ignore the "over-connected" ICAP service
|
|
# * wait: wait (in a FIFO queue) for an ICAP connection slot
|
|
# * force: proceed, ignoring the Max-Connections limit
|
|
#
|
|
# In SMP mode with N workers, each worker assumes the service
|
|
# connection limit is Max-Connections/N, even though not all
|
|
# workers may use a given service.
|
|
#
|
|
# The default value is "bypass" if service is bypassable,
|
|
# otherwise it is set to "wait".
|
|
#
|
|
#
|
|
# max-conn=number
|
|
# Use the given number as the Max-Connections limit, regardless
|
|
# of the Max-Connections value given by the service, if any.
|
|
#
|
|
# Older icap_service format without optional named parameters is
|
|
# deprecated but supported for backward compatibility.
|
|
#
|
|
#Example:
|
|
#icap_service svcBlocker reqmod_precache icap://icap1.mydomain.net:1344/reqmod bypass=0
|
|
#icap_service svcLogger reqmod_precache icap://icap2.mydomain.net:1344/respmod routing=on
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: icap_class
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# This deprecated option was documented to define an ICAP service
|
|
# chain, even though it actually defined a set of similar, redundant
|
|
# services, and the chains were not supported.
|
|
#
|
|
# To define a set of redundant services, please use the
|
|
# adaptation_service_set directive. For service chains, use
|
|
# adaptation_service_chain.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: icap_access
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# This option is deprecated. Please use adaptation_access, which
|
|
# has the same ICAP functionality, but comes with better
|
|
# documentation, and eCAP support.
|
|
#Default:
|
|
# none
|
|
|
|
# eCAP OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: ecap_enable on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap
|
|
#
|
|
# Controls whether eCAP support is enabled.
|
|
#Default:
|
|
# ecap_enable off
|
|
|
|
# TAG: ecap_service
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap
|
|
#
|
|
# Defines a single eCAP service
|
|
#
|
|
# ecap_service id vectoring_point uri [option ...]
|
|
#
|
|
# id: ID
|
|
# an opaque identifier or name which is used to direct traffic to
|
|
# this specific service. Must be unique among all adaptation
|
|
# services in squid.conf.
|
|
#
|
|
# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache
|
|
# This specifies at which point of transaction processing the
|
|
# eCAP service should be activated. *_postcache vectoring points
|
|
# are not yet supported.
|
|
#
|
|
# uri: ecap://vendor/service_name?custom&cgi=style¶meters=optional
|
|
# Squid uses the eCAP service URI to match this configuration
|
|
# line with one of the dynamically loaded services. Each loaded
|
|
# eCAP service must have a unique URI. Obtain the right URI from
|
|
# the service provider.
|
|
#
|
|
# To activate a service, use the adaptation_access directive. To group
|
|
# services, use adaptation_service_chain and adaptation_service_set.
|
|
#
|
|
# Service options are separated by white space. eCAP services support
|
|
# the following name=value options:
|
|
#
|
|
# bypass=on|off|1|0
|
|
# If set to 'on' or '1', the eCAP service is treated as optional.
|
|
# If the service cannot be reached or malfunctions, Squid will try
|
|
# to ignore any errors and process the message as if the service
|
|
# was not enabled. No all eCAP errors can be bypassed.
|
|
# If set to 'off' or '0', the eCAP service is treated as essential
|
|
# and all eCAP errors will result in an error page returned to the
|
|
# HTTP client.
|
|
#
|
|
# Bypass is off by default: services are treated as essential.
|
|
#
|
|
# routing=on|off|1|0
|
|
# If set to 'on' or '1', the eCAP service is allowed to
|
|
# dynamically change the current message adaptation plan by
|
|
# returning a chain of services to be used next.
|
|
#
|
|
# Dynamic adaptation plan may cross or cover multiple supported
|
|
# vectoring points in their natural processing order.
|
|
#
|
|
# Routing is not allowed by default.
|
|
#
|
|
# Older ecap_service format without optional named parameters is
|
|
# deprecated but supported for backward compatibility.
|
|
#
|
|
#
|
|
#Example:
|
|
#ecap_service s1 reqmod_precache ecap://filters.R.us/leakDetector?on_error=block bypass=off
|
|
#ecap_service s2 respmod_precache ecap://filters.R.us/virusFilter config=/etc/vf.cfg bypass=on
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: loadable_modules
|
|
# Instructs Squid to load the specified dynamic module(s) or activate
|
|
# preloaded module(s).
|
|
#Example:
|
|
#loadable_modules /usr/lib/MinimalAdapter.so
|
|
#Default:
|
|
# none
|
|
|
|
# MESSAGE ADAPTATION OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: adaptation_service_set
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap or --enable-icap-client
|
|
#
|
|
#
|
|
# Configures an ordered set of similar, redundant services. This is
|
|
# useful when hot standby or backup adaptation servers are available.
|
|
#
|
|
# adaptation_service_set set_name service_name1 service_name2 ...
|
|
#
|
|
# The named services are used in the set declaration order. The first
|
|
# applicable adaptation service from the set is used first. The next
|
|
# applicable service is tried if and only if the transaction with the
|
|
# previous service fails and the message waiting to be adapted is still
|
|
# intact.
|
|
#
|
|
# When adaptation starts, broken services are ignored as if they were
|
|
# not a part of the set. A broken service is a down optional service.
|
|
#
|
|
# The services in a set must be attached to the same vectoring point
|
|
# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD).
|
|
#
|
|
# If all services in a set are optional then adaptation failures are
|
|
# bypassable. If all services in the set are essential, then a
|
|
# transaction failure with one service may still be retried using
|
|
# another service from the set, but when all services fail, the master
|
|
# transaction fails as well.
|
|
#
|
|
# A set may contain a mix of optional and essential services, but that
|
|
# is likely to lead to surprising results because broken services become
|
|
# ignored (see above), making previously bypassable failures fatal.
|
|
# Technically, it is the bypassability of the last failed service that
|
|
# matters.
|
|
#
|
|
# See also: adaptation_access adaptation_service_chain
|
|
#
|
|
#Example:
|
|
#adaptation_service_set svcBlocker urlFilterPrimary urlFilterBackup
|
|
#adaptation service_set svcLogger loggerLocal loggerRemote
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: adaptation_service_chain
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap or --enable-icap-client
|
|
#
|
|
#
|
|
# Configures a list of complementary services that will be applied
|
|
# one-by-one, forming an adaptation chain or pipeline. This is useful
|
|
# when Squid must perform different adaptations on the same message.
|
|
#
|
|
# adaptation_service_chain chain_name service_name1 svc_name2 ...
|
|
#
|
|
# The named services are used in the chain declaration order. The first
|
|
# applicable adaptation service from the chain is used first. The next
|
|
# applicable service is applied to the successful adaptation results of
|
|
# the previous service in the chain.
|
|
#
|
|
# When adaptation starts, broken services are ignored as if they were
|
|
# not a part of the chain. A broken service is a down optional service.
|
|
#
|
|
# Request satisfaction terminates the adaptation chain because Squid
|
|
# does not currently allow declaration of RESPMOD services at the
|
|
# "reqmod_precache" vectoring point (see icap_service or ecap_service).
|
|
#
|
|
# The services in a chain must be attached to the same vectoring point
|
|
# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD).
|
|
#
|
|
# A chain may contain a mix of optional and essential services. If an
|
|
# essential adaptation fails (or the failure cannot be bypassed for
|
|
# other reasons), the master transaction fails. Otherwise, the failure
|
|
# is bypassed as if the failed adaptation service was not in the chain.
|
|
#
|
|
# See also: adaptation_access adaptation_service_set
|
|
#
|
|
#Example:
|
|
#adaptation_service_chain svcRequest requestLogger urlFilter leakDetector
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: adaptation_access
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap or --enable-icap-client
|
|
#
|
|
# Sends an HTTP transaction to an ICAP or eCAP adaptation service.
|
|
#
|
|
# adaptation_access service_name allow|deny [!]aclname...
|
|
# adaptation_access set_name allow|deny [!]aclname...
|
|
#
|
|
# At each supported vectoring point, the adaptation_access
|
|
# statements are processed in the order they appear in this
|
|
# configuration file. Statements pointing to the following services
|
|
# are ignored (i.e., skipped without checking their ACL):
|
|
#
|
|
# - services serving different vectoring points
|
|
# - "broken-but-bypassable" services
|
|
# - "up" services configured to ignore such transactions
|
|
# (e.g., based on the ICAP Transfer-Ignore header).
|
|
#
|
|
# When a set_name is used, all services in the set are checked
|
|
# using the same rules, to find the first applicable one. See
|
|
# adaptation_service_set for details.
|
|
#
|
|
# If an access list is checked and there is a match, the
|
|
# processing stops: For an "allow" rule, the corresponding
|
|
# adaptation service is used for the transaction. For a "deny"
|
|
# rule, no adaptation service is activated.
|
|
#
|
|
# It is currently not possible to apply more than one adaptation
|
|
# service at the same vectoring point to the same HTTP transaction.
|
|
#
|
|
# See also: icap_service and ecap_service
|
|
#
|
|
#Example:
|
|
#adaptation_access service_1 allow all
|
|
#Default:
|
|
# Allow, unless rules exist in squid.conf.
|
|
|
|
# TAG: adaptation_service_iteration_limit
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap or --enable-icap-client
|
|
#
|
|
# Limits the number of iterations allowed when applying adaptation
|
|
# services to a message. If your longest adaptation set or chain
|
|
# may have more than 16 services, increase the limit beyond its
|
|
# default value of 16. If detecting infinite iteration loops sooner
|
|
# is critical, make the iteration limit match the actual number
|
|
# of services in your longest adaptation set or chain.
|
|
#
|
|
# Infinite adaptation loops are most likely with routing services.
|
|
#
|
|
# See also: icap_service routing=1
|
|
#Default:
|
|
# adaptation_service_iteration_limit 16
|
|
|
|
# TAG: adaptation_masterx_shared_names
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap or --enable-icap-client
|
|
#
|
|
# For each master transaction (i.e., the HTTP request and response
|
|
# sequence, including all related ICAP and eCAP exchanges), Squid
|
|
# maintains a table of metadata. The table entries are (name, value)
|
|
# pairs shared among eCAP and ICAP exchanges. The table is destroyed
|
|
# with the master transaction.
|
|
#
|
|
# This option specifies the table entry names that Squid must accept
|
|
# from and forward to the adaptation transactions.
|
|
#
|
|
# An ICAP REQMOD or RESPMOD transaction may set an entry in the
|
|
# shared table by returning an ICAP header field with a name
|
|
# specified in adaptation_masterx_shared_names.
|
|
#
|
|
# An eCAP REQMOD or RESPMOD transaction may set an entry in the
|
|
# shared table by implementing the libecap::visitEachOption() API
|
|
# to provide an option with a name specified in
|
|
# adaptation_masterx_shared_names.
|
|
#
|
|
# Squid will store and forward the set entry to subsequent adaptation
|
|
# transactions within the same master transaction scope.
|
|
#
|
|
# Only one shared entry name is supported at this time.
|
|
#
|
|
#Example:
|
|
## share authentication information among ICAP services
|
|
#adaptation_masterx_shared_names X-Subscriber-ID
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: adaptation_meta
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-ecap or --enable-icap-client
|
|
#
|
|
# This option allows Squid administrator to add custom ICAP request
|
|
# headers or eCAP options to Squid ICAP requests or eCAP transactions.
|
|
# Use it to pass custom authentication tokens and other
|
|
# transaction-state related meta information to an ICAP/eCAP service.
|
|
#
|
|
# The addition of a meta header is ACL-driven:
|
|
# adaptation_meta name value [!]aclname ...
|
|
#
|
|
# Processing for a given header name stops after the first ACL list match.
|
|
# Thus, it is impossible to add two headers with the same name. If no ACL
|
|
# lists match for a given header name, no such header is added. For
|
|
# example:
|
|
#
|
|
# # do not debug transactions except for those that need debugging
|
|
# adaptation_meta X-Debug 1 needs_debugging
|
|
#
|
|
# # log all transactions except for those that must remain secret
|
|
# adaptation_meta X-Log 1 !keep_secret
|
|
#
|
|
# # mark transactions from users in the "G 1" group
|
|
# adaptation_meta X-Authenticated-Groups "G 1" authed_as_G1
|
|
#
|
|
# The "value" parameter may be a regular squid.conf token or a "double
|
|
# quoted string". Within the quoted string, use backslash (\) to escape
|
|
# any character, which is currently only useful for escaping backslashes
|
|
# and double quotes. For example,
|
|
# "this string has one backslash (\\) and two \"quotes\""
|
|
#
|
|
# Used adaptation_meta header values may be logged via %note
|
|
# logformat code. If multiple adaptation_meta headers with the same name
|
|
# are used during master transaction lifetime, the header values are
|
|
# logged in the order they were used and duplicate values are ignored
|
|
# (only the first repeated value will be logged).
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: icap_retry
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# This ACL determines which retriable ICAP transactions are
|
|
# retried. Transactions that received a complete ICAP response
|
|
# and did not have to consume or produce HTTP bodies to receive
|
|
# that response are usually retriable.
|
|
#
|
|
# icap_retry allow|deny [!]aclname ...
|
|
#
|
|
# Squid automatically retries some ICAP I/O timeouts and errors
|
|
# due to persistent connection race conditions.
|
|
#
|
|
# See also: icap_retry_limit
|
|
#Default:
|
|
# icap_retry deny all
|
|
|
|
# TAG: icap_retry_limit
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --enable-icap-client
|
|
#
|
|
# Limits the number of retries allowed.
|
|
#
|
|
# Communication errors due to persistent connection race
|
|
# conditions are unavoidable, automatically retried, and do not
|
|
# count against this limit.
|
|
#
|
|
# See also: icap_retry
|
|
#Default:
|
|
# No retries are allowed.
|
|
|
|
# DNS OPTIONS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: check_hostnames
|
|
# For security and stability reasons Squid can check
|
|
# hostnames for Internet standard RFC compliance. If you want
|
|
# Squid to perform these checks turn this directive on.
|
|
#Default:
|
|
# check_hostnames off
|
|
|
|
# TAG: allow_underscore
|
|
# Underscore characters is not strictly allowed in Internet hostnames
|
|
# but nevertheless used by many sites. Set this to off if you want
|
|
# Squid to be strict about the standard.
|
|
# This check is performed only when check_hostnames is set to on.
|
|
#Default:
|
|
# allow_underscore on
|
|
|
|
# TAG: cache_dns_program
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --disable-internal-dns
|
|
#
|
|
# Specify the location of the executable for dnslookup process.
|
|
#Default:
|
|
# cache_dns_program /usr/libexec/dnsserver
|
|
|
|
# TAG: dns_children
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# --disable-internal-dns
|
|
#
|
|
# The maximum number of processes spawn to service DNS name lookups.
|
|
# If you limit it too few Squid will have to wait for them to process
|
|
# a backlog of requests, slowing it down. If you allow too many they
|
|
# will use RAM and other system resources noticably.
|
|
# The maximum this may be safely set to is 32.
|
|
#
|
|
# The startup= and idle= options allow some measure of skew in your
|
|
# tuning.
|
|
#
|
|
# startup=
|
|
#
|
|
# Sets a minimum of how many processes are to be spawned when Squid
|
|
# starts or reconfigures. When set to zero the first request will
|
|
# cause spawning of the first child process to handle it.
|
|
#
|
|
# Starting too few will cause an initial slowdown in traffic as Squid
|
|
# attempts to simultaneously spawn enough processes to cope.
|
|
#
|
|
# idle=
|
|
#
|
|
# Sets a minimum of how many processes Squid is to try and keep available
|
|
# at all times. When traffic begins to rise above what the existing
|
|
# processes can handle this many more will be spawned up to the maximum
|
|
# configured. A minimum setting of 1 is required.
|
|
#Default:
|
|
# dns_children 32 startup=1 idle=1
|
|
|
|
# TAG: dns_retransmit_interval
|
|
# Initial retransmit interval for DNS queries. The interval is
|
|
# doubled each time all configured DNS servers have been tried.
|
|
#Default:
|
|
# dns_retransmit_interval 5 seconds
|
|
|
|
# TAG: dns_timeout
|
|
# DNS Query timeout. If no response is received to a DNS query
|
|
# within this time all DNS servers for the queried domain
|
|
# are assumed to be unavailable.
|
|
#Default:
|
|
# dns_timeout 30 seconds
|
|
|
|
# TAG: dns_packet_max
|
|
# Maximum number of bytes packet size to advertise via EDNS.
|
|
# Set to "none" to disable EDNS large packet support.
|
|
#
|
|
# For legacy reasons DNS UDP replies will default to 512 bytes which
|
|
# is too small for many responses. EDNS provides a means for Squid to
|
|
# negotiate receiving larger responses back immediately without having
|
|
# to failover with repeat requests. Responses larger than this limit
|
|
# will retain the old behaviour of failover to TCP DNS.
|
|
#
|
|
# Squid has no real fixed limit internally, but allowing packet sizes
|
|
# over 1500 bytes requires network jumbogram support and is usually not
|
|
# necessary.
|
|
#
|
|
# WARNING: The RFC also indicates that some older resolvers will reply
|
|
# with failure of the whole request if the extension is added. Some
|
|
# resolvers have already been identified which will reply with mangled
|
|
# EDNS response on occasion. Usually in response to many-KB jumbogram
|
|
# sizes being advertised by Squid.
|
|
# Squid will currently treat these both as an unable-to-resolve domain
|
|
# even if it would be resolvable without EDNS.
|
|
#Default:
|
|
# EDNS disabled
|
|
|
|
# TAG: dns_defnames on|off
|
|
# Normally the RES_DEFNAMES resolver option is disabled
|
|
# (see res_init(3)). This prevents caches in a hierarchy
|
|
# from interpreting single-component hostnames locally. To allow
|
|
# Squid to handle single-component names, enable this option.
|
|
#Default:
|
|
# Search for single-label domain names is disabled.
|
|
|
|
# TAG: dns_multicast_local on|off
|
|
# When set to on, Squid sends multicast DNS lookups on the local
|
|
# network for domains ending in .local and .arpa.
|
|
# This enables local servers and devices to be contacted in an
|
|
# ad-hoc or zero-configuration network environment.
|
|
#Default:
|
|
# Search for .local and .arpa names is disabled.
|
|
|
|
# TAG: dns_nameservers
|
|
# Use this if you want to specify a list of DNS name servers
|
|
# (IP addresses) to use instead of those given in your
|
|
# /etc/resolv.conf file.
|
|
#
|
|
# On Windows platforms, if no value is specified here or in
|
|
# the /etc/resolv.conf file, the list of DNS name servers are
|
|
# taken from the Windows registry, both static and dynamic DHCP
|
|
# configurations are supported.
|
|
#
|
|
# Example: dns_nameservers 10.0.0.1 192.172.0.4
|
|
#Default:
|
|
# Use operating system definitions
|
|
|
|
# TAG: hosts_file
|
|
# Location of the host-local IP name-address associations
|
|
# database. Most Operating Systems have such a file on different
|
|
# default locations:
|
|
# - Un*X & Linux: /etc/hosts
|
|
# - Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts
|
|
# (%SystemRoot% value install default is c:\winnt)
|
|
# - Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts
|
|
# (%SystemRoot% value install default is c:\windows)
|
|
# - Windows 9x/Me: %windir%\hosts
|
|
# (%windir% value is usually c:\windows)
|
|
# - Cygwin: /etc/hosts
|
|
#
|
|
# The file contains newline-separated definitions, in the
|
|
# form ip_address_in_dotted_form name [name ...] names are
|
|
# whitespace-separated. Lines beginning with an hash (#)
|
|
# character are comments.
|
|
#
|
|
# The file is checked at startup and upon configuration.
|
|
# If set to 'none', it won't be checked.
|
|
# If append_domain is used, that domain will be added to
|
|
# domain-local (i.e. not containing any dot character) host
|
|
# definitions.
|
|
#Default:
|
|
# hosts_file /etc/hosts
|
|
|
|
# TAG: append_domain
|
|
# Appends local domain name to hostnames without any dots in
|
|
# them. append_domain must begin with a period.
|
|
#
|
|
# Be warned there are now Internet names with no dots in
|
|
# them using only top-domain names, so setting this may
|
|
# cause some Internet sites to become unavailable.
|
|
#
|
|
#Example:
|
|
# append_domain .yourdomain.com
|
|
#Default:
|
|
# Use operating system definitions
|
|
|
|
# TAG: ignore_unknown_nameservers
|
|
# By default Squid checks that DNS responses are received
|
|
# from the same IP addresses they are sent to. If they
|
|
# don't match, Squid ignores the response and writes a warning
|
|
# message to cache.log. You can allow responses from unknown
|
|
# nameservers by setting this option to 'off'.
|
|
#Default:
|
|
# ignore_unknown_nameservers on
|
|
|
|
# TAG: dns_v4_first
|
|
# With the IPv6 Internet being as fast or faster than IPv4 Internet
|
|
# for most networks Squid prefers to contact websites over IPv6.
|
|
#
|
|
# This option reverses the order of preference to make Squid contact
|
|
# dual-stack websites over IPv4 first. Squid will still perform both
|
|
# IPv6 and IPv4 DNS lookups before connecting.
|
|
#
|
|
# WARNING:
|
|
# This option will restrict the situations under which IPv6
|
|
# connectivity is used (and tested). Hiding network problems
|
|
# which would otherwise be detected and warned about.
|
|
#Default:
|
|
# dns_v4_first off
|
|
|
|
# TAG: ipcache_size (number of entries)
|
|
# Maximum number of DNS IP cache entries.
|
|
#Default:
|
|
# ipcache_size 1024
|
|
|
|
# TAG: ipcache_low (percent)
|
|
#Default:
|
|
# ipcache_low 90
|
|
|
|
# TAG: ipcache_high (percent)
|
|
# The size, low-, and high-water marks for the IP cache.
|
|
#Default:
|
|
# ipcache_high 95
|
|
|
|
# TAG: fqdncache_size (number of entries)
|
|
# Maximum number of FQDN cache entries.
|
|
#Default:
|
|
# fqdncache_size 1024
|
|
|
|
# MISCELLANEOUS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# TAG: configuration_includes_quoted_values on|off
|
|
# Previous Squid versions have defined "quoted/string" as syntax for
|
|
# ACL to signifiy the value is an included file containing values and
|
|
# has treated the " characters in other places of the configuration file
|
|
# as part of the parameter value it was used for.
|
|
#
|
|
# For compatibility with existing installations that behaviour
|
|
# remains the default.
|
|
#
|
|
# If this directive is set to 'on', Squid will start parsing each
|
|
# "quoted string" as a single configuration directive parameter. The
|
|
# quotes are stripped before the parameter value is interpreted or use.
|
|
#
|
|
# That will continue for all lines until this directive is set to 'off',
|
|
# where Squid will return to the default configuration parsing.
|
|
#
|
|
# For example;
|
|
#
|
|
# configuration_includes_quoted_values on
|
|
# acl group external groupCheck Administrators "Internet Users" Guest
|
|
# configuration_includes_quoted_values off
|
|
#
|
|
#Default:
|
|
# configuration_includes_quoted_values off
|
|
|
|
# TAG: memory_pools on|off
|
|
# If set, Squid will keep pools of allocated (but unused) memory
|
|
# available for future use. If memory is a premium on your
|
|
# system and you believe your malloc library outperforms Squid
|
|
# routines, disable this.
|
|
#Default:
|
|
# memory_pools on
|
|
|
|
# TAG: memory_pools_limit (bytes)
|
|
# Used only with memory_pools on:
|
|
# memory_pools_limit 50 MB
|
|
#
|
|
# If set to a non-zero value, Squid will keep at most the specified
|
|
# limit of allocated (but unused) memory in memory pools. All free()
|
|
# requests that exceed this limit will be handled by your malloc
|
|
# library. Squid does not pre-allocate any memory, just safe-keeps
|
|
# objects that otherwise would be free()d. Thus, it is safe to set
|
|
# memory_pools_limit to a reasonably high value even if your
|
|
# configuration will use less memory.
|
|
#
|
|
# If set to none, Squid will keep all memory it can. That is, there
|
|
# will be no limit on the total amount of memory used for safe-keeping.
|
|
#
|
|
# To disable memory allocation optimization, do not set
|
|
# memory_pools_limit to 0 or none. Set memory_pools to "off" instead.
|
|
#
|
|
# An overhead for maintaining memory pools is not taken into account
|
|
# when the limit is checked. This overhead is close to four bytes per
|
|
# object kept. However, pools may actually _save_ memory because of
|
|
# reduced memory thrashing in your malloc library.
|
|
#Default:
|
|
# memory_pools_limit 5 MB
|
|
|
|
# TAG: forwarded_for on|off|transparent|truncate|delete
|
|
# If set to "on", Squid will append your client's IP address
|
|
# in the HTTP requests it forwards. By default it looks like:
|
|
#
|
|
# X-Forwarded-For: 192.1.2.3
|
|
#
|
|
# If set to "off", it will appear as
|
|
#
|
|
# X-Forwarded-For: unknown
|
|
#
|
|
# If set to "transparent", Squid will not alter the
|
|
# X-Forwarded-For header in any way.
|
|
#
|
|
# If set to "delete", Squid will delete the entire
|
|
# X-Forwarded-For header.
|
|
#
|
|
# If set to "truncate", Squid will remove all existing
|
|
# X-Forwarded-For entries, and place the client IP as the sole entry.
|
|
#Default:
|
|
# forwarded_for on
|
|
|
|
# TAG: cachemgr_passwd
|
|
# Specify passwords for cachemgr operations.
|
|
#
|
|
# Usage: cachemgr_passwd password action action ...
|
|
#
|
|
# Some valid actions are (see cache manager menu for a full list):
|
|
# 5min
|
|
# 60min
|
|
# asndb
|
|
# authenticator
|
|
# cbdata
|
|
# client_list
|
|
# comm_incoming
|
|
# config *
|
|
# counters
|
|
# delay
|
|
# digest_stats
|
|
# dns
|
|
# events
|
|
# filedescriptors
|
|
# fqdncache
|
|
# histograms
|
|
# http_headers
|
|
# info
|
|
# io
|
|
# ipcache
|
|
# mem
|
|
# menu
|
|
# netdb
|
|
# non_peers
|
|
# objects
|
|
# offline_toggle *
|
|
# pconn
|
|
# peer_select
|
|
# reconfigure *
|
|
# redirector
|
|
# refresh
|
|
# server_list
|
|
# shutdown *
|
|
# store_digest
|
|
# storedir
|
|
# utilization
|
|
# via_headers
|
|
# vm_objects
|
|
#
|
|
# * Indicates actions which will not be performed without a
|
|
# valid password, others can be performed if not listed here.
|
|
#
|
|
# To disable an action, set the password to "disable".
|
|
# To allow performing an action without a password, set the
|
|
# password to "none".
|
|
#
|
|
# Use the keyword "all" to set the same password for all actions.
|
|
#
|
|
#Example:
|
|
# cachemgr_passwd secret shutdown
|
|
# cachemgr_passwd lesssssssecret info stats/objects
|
|
# cachemgr_passwd disable all
|
|
#Default:
|
|
# No password. Actions which require password are denied.
|
|
|
|
# TAG: client_db on|off
|
|
# If you want to disable collecting per-client statistics,
|
|
# turn off client_db here.
|
|
#Default:
|
|
# client_db on
|
|
|
|
# TAG: refresh_all_ims on|off
|
|
# When you enable this option, squid will always check
|
|
# the origin server for an update when a client sends an
|
|
# If-Modified-Since request. Many browsers use IMS
|
|
# requests when the user requests a reload, and this
|
|
# ensures those clients receive the latest version.
|
|
#
|
|
# By default (off), squid may return a Not Modified response
|
|
# based on the age of the cached version.
|
|
#Default:
|
|
# refresh_all_ims off
|
|
|
|
# TAG: reload_into_ims on|off
|
|
# When you enable this option, client no-cache or ``reload''
|
|
# requests will be changed to If-Modified-Since requests.
|
|
# Doing this VIOLATES the HTTP standard. Enabling this
|
|
# feature could make you liable for problems which it
|
|
# causes.
|
|
#
|
|
# see also refresh_pattern for a more selective approach.
|
|
#Default:
|
|
# reload_into_ims off
|
|
|
|
# TAG: connect_retries
|
|
# This sets the maximum number of connection attempts made for each
|
|
# TCP connection. The connect_retries attempts must all still
|
|
# complete within the connection timeout period.
|
|
#
|
|
# The default is not to re-try if the first connection attempt fails.
|
|
# The (not recommended) maximum is 10 tries.
|
|
#
|
|
# A warning message will be generated if it is set to a too-high
|
|
# value and the configured value will be over-ridden.
|
|
#
|
|
# Note: These re-tries are in addition to forward_max_tries
|
|
# which limit how many different addresses may be tried to find
|
|
# a useful server.
|
|
#Default:
|
|
# Do not retry failed connections.
|
|
|
|
# TAG: retry_on_error
|
|
# If set to ON Squid will automatically retry requests when
|
|
# receiving an error response with status 403 (Forbidden),
|
|
# 500 (Internal Error), 501 or 503 (Service not available).
|
|
# Status 502 and 504 (Gateway errors) are always retried.
|
|
#
|
|
# This is mainly useful if you are in a complex cache hierarchy to
|
|
# work around access control errors.
|
|
#
|
|
# NOTE: This retry will attempt to find another working destination.
|
|
# Which is different from the server which just failed.
|
|
#Default:
|
|
# retry_on_error off
|
|
|
|
# TAG: as_whois_server
|
|
# WHOIS server to query for AS numbers. NOTE: AS numbers are
|
|
# queried only when Squid starts up, not for every request.
|
|
#Default:
|
|
# as_whois_server whois.ra.net
|
|
|
|
# TAG: offline_mode
|
|
# Enable this option and Squid will never try to validate cached
|
|
# objects.
|
|
#Default:
|
|
# offline_mode off
|
|
|
|
# TAG: uri_whitespace
|
|
# What to do with requests that have whitespace characters in the
|
|
# URI. Options:
|
|
#
|
|
# strip: The whitespace characters are stripped out of the URL.
|
|
# This is the behavior recommended by RFC2396 and RFC3986
|
|
# for tolerant handling of generic URI.
|
|
# NOTE: This is one difference between generic URI and HTTP URLs.
|
|
#
|
|
# deny: The request is denied. The user receives an "Invalid
|
|
# Request" message.
|
|
# This is the behaviour recommended by RFC2616 for safe
|
|
# handling of HTTP request URL.
|
|
#
|
|
# allow: The request is allowed and the URI is not changed. The
|
|
# whitespace characters remain in the URI. Note the
|
|
# whitespace is passed to redirector processes if they
|
|
# are in use.
|
|
# Note this may be considered a violation of RFC2616
|
|
# request parsing where whitespace is prohibited in the
|
|
# URL field.
|
|
#
|
|
# encode: The request is allowed and the whitespace characters are
|
|
# encoded according to RFC1738.
|
|
#
|
|
# chop: The request is allowed and the URI is chopped at the
|
|
# first whitespace.
|
|
#
|
|
#
|
|
# NOTE the current Squid implementation of encode and chop violates
|
|
# RFC2616 by not using a 301 redirect after altering the URL.
|
|
#Default:
|
|
# uri_whitespace strip
|
|
|
|
# TAG: chroot
|
|
# Specifies a directory where Squid should do a chroot() while
|
|
# initializing. This also causes Squid to fully drop root
|
|
# privileges after initializing. This means, for example, if you
|
|
# use a HTTP port less than 1024 and try to reconfigure, you may
|
|
# get an error saying that Squid can not open the port.
|
|
#Default:
|
|
# none
|
|
|
|
# TAG: balance_on_multiple_ip
|
|
# Modern IP resolvers in squid sort lookup results by preferred access.
|
|
# By default squid will use these IP in order and only rotates to
|
|
# the next listed when the most preffered fails.
|
|
#
|
|
# Some load balancing servers based on round robin DNS have been
|
|
# found not to preserve user session state across requests
|
|
# to different IP addresses.
|
|
#
|
|
# Enabling this directive Squid rotates IP's per request.
|
|
#Default:
|
|
# balance_on_multiple_ip off
|
|
|
|
# TAG: pipeline_prefetch
|
|
# HTTP clients may send a pipeline of 1+N requests to Squid using a
|
|
# single connection, without waiting for Squid to respond to the first
|
|
# of those requests. This option limits the number of concurrent
|
|
# requests Squid will try to handle in parallel. If set to N, Squid
|
|
# will try to receive and process up to 1+N requests on the same
|
|
# connection concurrently.
|
|
#
|
|
# Defaults to 0 (off) for bandwidth management and access logging
|
|
# reasons.
|
|
#
|
|
# NOTE: pipelining requires persistent connections to clients.
|
|
#
|
|
# WARNING: pipelining breaks NTLM and Negotiate/Kerberos authentication.
|
|
#Default:
|
|
# Do not pre-parse pipelined requests.
|
|
|
|
# TAG: high_response_time_warning (msec)
|
|
# If the one-minute median response time exceeds this value,
|
|
# Squid prints a WARNING with debug level 0 to get the
|
|
# administrators attention. The value is in milliseconds.
|
|
#Default:
|
|
# disabled.
|
|
|
|
# TAG: high_page_fault_warning
|
|
# If the one-minute average page fault rate exceeds this
|
|
# value, Squid prints a WARNING with debug level 0 to get
|
|
# the administrators attention. The value is in page faults
|
|
# per second.
|
|
#Default:
|
|
# disabled.
|
|
|
|
# TAG: high_memory_warning
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# GNU Malloc with mstats()
|
|
#
|
|
# If the memory usage (as determined by mallinfo) exceeds
|
|
# this amount, Squid prints a WARNING with debug level 0 to get
|
|
# the administrators attention.
|
|
#Default:
|
|
# disabled.
|
|
|
|
# TAG: sleep_after_fork (microseconds)
|
|
# When this is set to a non-zero value, the main Squid process
|
|
# sleeps the specified number of microseconds after a fork()
|
|
# system call. This sleep may help the situation where your
|
|
# system reports fork() failures due to lack of (virtual)
|
|
# memory. Note, however, if you have a lot of child
|
|
# processes, these sleep delays will add up and your
|
|
# Squid will not service requests for some amount of time
|
|
# until all the child processes have been started.
|
|
# On Windows value less then 1000 (1 milliseconds) are
|
|
# rounded to 1000.
|
|
#Default:
|
|
# sleep_after_fork 0
|
|
|
|
# TAG: windows_ipaddrchangemonitor on|off
|
|
# Note: This option is only available if Squid is rebuilt with the
|
|
# MS Windows
|
|
#
|
|
# On Windows Squid by default will monitor IP address changes and will
|
|
# reconfigure itself after any detected event. This is very useful for
|
|
# proxies connected to internet with dial-up interfaces.
|
|
# In some cases (a Proxy server acting as VPN gateway is one) it could be
|
|
# desiderable to disable this behaviour setting this to 'off'.
|
|
# Note: after changing this, Squid service must be restarted.
|
|
#Default:
|
|
# windows_ipaddrchangemonitor on
|
|
|
|
# TAG: eui_lookup
|
|
# Whether to lookup the EUI or MAC address of a connected client.
|
|
#Default:
|
|
# eui_lookup on
|
|
|
|
# TAG: max_filedescriptors
|
|
# Reduce the maximum number of filedescriptors supported below
|
|
# the usual operating system defaults.
|
|
#
|
|
# Remove from squid.conf to inherit the current ulimit setting.
|
|
#
|
|
# Note: Changing this requires a restart of Squid. Also
|
|
# not all I/O types supports large values (eg on Windows).
|
|
#Default:
|
|
# Use operating system limits set by ulimit.
|
|
|
|
# TAG: workers
|
|
# Number of main Squid processes or "workers" to fork and maintain.
|
|
# 0: "no daemon" mode, like running "squid -N ..."
|
|
# 1: "no SMP" mode, start one main Squid process daemon (default)
|
|
# N: start N main Squid process daemons (i.e., SMP mode)
|
|
#
|
|
# In SMP mode, each worker does nearly all what a single Squid daemon
|
|
# does (e.g., listen on http_port and forward HTTP requests).
|
|
#Default:
|
|
# SMP support disabled.
|
|
|
|
# TAG: cpu_affinity_map
|
|
# Usage: cpu_affinity_map process_numbers=P1,P2,... cores=C1,C2,...
|
|
#
|
|
# Sets 1:1 mapping between Squid processes and CPU cores. For example,
|
|
#
|
|
# cpu_affinity_map process_numbers=1,2,3,4 cores=1,3,5,7
|
|
#
|
|
# affects processes 1 through 4 only and places them on the first
|
|
# four even cores, starting with core #1.
|
|
#
|
|
# CPU cores are numbered starting from 1. Requires support for
|
|
# sched_getaffinity(2) and sched_setaffinity(2) system calls.
|
|
#
|
|
# Multiple cpu_affinity_map options are merged.
|
|
#
|
|
# See also: workers
|
|
#Default:
|
|
# Let operating system decide.
|
|
|