mirror of
https://github.com/Ponce/slackbuilds
synced 2024-11-18 22:06:04 +01:00
31 lines
1.6 KiB
Text
31 lines
1.6 KiB
Text
Linux Processor Microcode Data File
|
|
|
|
The microcode data file contains the latest microcode definitions for all Intel
|
|
processors. Intel releases microcode updates to correct processor behavior as
|
|
documented in the respective processor specification updates. While the regular
|
|
approach to getting this microcode update is via a BIOS upgrade, Intel realizes
|
|
that this can be an administrative hassle. The Linux operating system and VMware
|
|
ESX products have a mechanism to update the microcode after booting.
|
|
|
|
This SlackBuild repackages the official Intel microcode tarball, placing the
|
|
microcode.dat file under /lib/firmware/microcode.dat, which can be later
|
|
uploaded using microcode_ctl utility (available from SlackBuilds.org).
|
|
|
|
If the iucode_tool (available from SlackBuilds.org) is installed on the system,
|
|
this SlackBuild writes the microcodes with the file names expected by the Linux
|
|
kernel firmware loader and places them under /lib/firmware/intel-ucode
|
|
directory. In that case, the correct microcode is uploaded when the Intel
|
|
microcode kernel's module is loaded.
|
|
|
|
Please note that the method using the iucode_tool is preferred for multiple
|
|
reasons, one being the deprecation of the kernel's interface used by the
|
|
microcode_ctl utility.
|
|
|
|
If you need to load the microcode early during the boot:
|
|
1) read https://www.kernel.org/doc/Documentation/x86/early-microcode.txt
|
|
2) read the manual for iucode_tool, especially about --write-earlyfw option
|
|
3) make sure your kernel has the followings:
|
|
CONFIG_MICROCODE=y
|
|
CONFIG_MICROCODE_EARLY=y
|
|
CONFIG_MICROCODE_INTEL=y
|
|
CONFIG_MICROCODE_INTEL_EARLY=y
|