slackbuilds_ponce/system/nvidia-driver/nvidia-switch
Edward W. Koenig a33493f475 system/nvidia-driver: Updated for version 375.39.
Signed-off-by: Matteo Bernardini <ponce@slackbuilds.org>
2017-02-21 09:10:35 +01:00

267 lines
7.6 KiB
Bash

#!/bin/sh
# Copyright 2012-2017 Edward W. Koenig, Vancouver, WA, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# nvidia-switch utility 3.0
#
# A tool to install and cleanly remove the nvidia driver without stomping on the xorg files.
# Note: this tool "should" allow switching on the fly, but why? Pick a driver! You will still
# need to edit a bunch of other config files.
# TO-DO: needs more cleanup; still way too brittle.
ROOT="${ROOT:-/}"
CWD=$(pwd)
LIBSUFFIX="LIBDIRSUFFIX" # This will be replaced in the build script
COMPAT32="LIB32FLAG" # This will be replaced in the build script (yes | no)
INC="${ROOT}usr/include/GL"
LIB="${ROOT}usr/lib${LIBSUFFIX}"
LIB32="${ROOT}usr/lib"
XMOD="${LIB}/xorg/modules"
XLIB="$XMOD/extensions"
NV_VERSION="PKGVERSION" # This will be replaced in the build script
GL_VERSION="1.2.0"
GLVND="GLVNDFLAG" # This will be replaced in the build script (yes | no)
NV_CONF="/usr/share/X11/xorg.conf.d/10-nvidia.conf"
save_GL(){
cd $2
case "$1" in
"nvidia")
mv libGL.so.$GL_VERSION libGL.so.$GL_VERSION-xorg
mv libGL.la libGL.la-xorg
mv libGL.la-nvidia libGL.la
mv libEGL.so.1.0.0 libEGL.so.1.0.0-xorg
if [ "$GLVND" = "yes" ]; then
ln -sf libGL.so.1.0.0 libGL.so.1
ln -sf libGL.so.1 libGL.so
ln -sf libEGL.so.1-nvidia libEGL.so.1
ln -sf libEGL.so.1 libEGL.so
else
ln -sf libGL.so.$NV_VERSION libGL.so.1
ln -sf libGL.so.1 libGL.so
ln -sf libEGL.so.$NV_VERSION libEGL.so.1
ln -sf libEGL.so.1 libEGL.so
fi
mv libGLESv1_CM.so.1.1.0 libGLESv1_CM.so.1.1.0-xorg
ln -sf libGLESv1_CM.so.1-nvidia libGLESv1_CM.so.1
ln -sf libGLESv1_CM.so.1 libGLESv1_CM.so
mv libGLESv2.so.2.0.0 libGLESv2.so.2.0.0-xorg
ln -sf libGLESv2.so.2-nvidia libGLESv2.so.2
ln -sf libGLESv2.so.2 libGLESv2.so
;;
"xorg")
mv libGL.la libGL.la-nvidia
mv libGL.la-xorg libGL.la
mv libEGL.so.1.0.0-xorg libEGL.so.1.0.0
mv libGL.so.$GL_VERSION-xorg libGL.so.$GL_VERSION
ln -sf libGL.so.$GL_VERSION libGL.so.1
ln -sf libGL.so.$GL_VERSION libGL.so
ln -sf libEGL.so.1.0.0 libEGL.so.1
ln -sf libEGL.so.1.0.0 libEGL.so
mv libGLESv1_CM.so.1.1.0-xorg libGLESv1_CM.so.1.1.0
ln -sf libGLESv1_CM.so.1.1.0 libGLESv1_CM.so.1
ln -sf libGLESv1_CM.so.1.1.0 libGLESv1_CM.so
mv libGLESv2.so.2.0.0-xorg libGLESv2.so.2.0.0
ln -sf libGLESv2.so.2.0.0 libGLESv2.so.2
ln -sf libGLESv2.so.2.0.0 libGLESv2.so
;;
*)
echo "nothind to do for save_gl?"
exit 1
;;
esac
cd "$CWD"
}
save_glx(){
cd "$XLIB"
case "$1" in
"nvidia")
if [ -e libglx.so ]; then
mv libglx.so libglx.so-xorg
fi
ln -sf libglx.so.$NV_VERSION libglx.so
;;
"xorg")
if [ -e libglx.so-xorg ]; then
rm -f libglx.so
mv libglx.so-xorg libglx.so
else
rm -f libglx.so
fi
;;
*)
echo "nothind to do for save_glx?"
exit 1
;;
esac
cd "$CWD"
}
save_wfb(){
cd "$XMOD"
if [ -e libwfb.so ]; then
echo "Using existing Xorg libwfb..."
else
if [ "$1" = "nvidia" ]; then
ln -sf libwfb.so.$NV_VERSION libwfb.so.1
ln -sf libwfb.so.1 libwfb.so
fi
if [ "$1" = "xorg" ]; then
rm -f libwfb.so
rm -f libwfb.so.1
fi
fi
cd "$CWD"
}
nvidia_install(){
echo $'Installing to nvidia-driver files!\n'
echo "Make sure the nvidia driver is ENABLED in /etc/X11/xorg.conf"
echo "and in /etc/X11/xorg.conf.d."
echo "Otherwise, this may lead to improperly working drivers."
save_glx "nvidia"
save_GL "nvidia" $LIB
save_wfb "nvidia"
# Check for multilib configuration
if [ "$COMPAT32" = "yes" ]; then
if [ -e $LIB32/libGL.so.$GL_VERSION ]; then
save_GL "nvidia" $LIB32
else
echo "mesa-compat32 is not installed, skipping..."
fi
fi
}
nvidia_remove(){
echo $'Returning to stock xorg files!\n'
echo "Make sure the nvidia driver is DISABLED in /usr/share/X11/xorg.conf.d"
echo "/etc/X11/xorg.conf and in /etc/X11/xorg.conf.d."
echo "Otherwise, this may lead to improperly working drivers."
save_glx "xorg"
save_GL "xorg" $LIB
save_wfb "xorg"
# remove dangling sylinks
rm -f $LIB/libnvcuvid.so.1
rm -f $LIB/libnvidia-cfg.so.1
rm -f $LIB/libnvidia-encode.so.1
rm -f $LIB/libnvidia-fbc.so.1
rm -f $LIB/libnvidia-ifr.so.1
rm -f $LIB/libnvidia-ml.so.1
rm -f $LIB/libnvidia-opencl.so.1
rm -f $LIB/libcuda.so.1
rm -f $LIB/libOpenCL.so.1
# Check for multilib configuration
if [ "$COMPAT32" = "yes" ]; then
if [ -e $LIB32/libGL.so.$GL_VERSION-xorg ]; then
save_GL "xorg" $LIB32
else
echo "mesa-compat32 is not installed, skipping..."
fi
# remove dangling sylinks
rm -f $LIB32/libnvcuvid.so.1
rm -f $LIB32/libnvidia-encode.so.1
rm -f $LIB32/libnvidia-fbc.so.1
rm -f $LIB32/libnvidia-ifr.so.1
rm -f $LIB32/libnvidia-ml.so.1
rm -f $LIB32/libnvidia-opencl.so.1
rm -f $LIB32/libcuda.so.1
rm -f $LIB32/libOpenCL.so.1
fi
if [ -e $NV_CONF ]; then
echo "removing $NV_CONF: you will need to provide your own"
echo "or reinstall nvidia-driver."
rm -f $NV_CONF
fi
}
restore(){
# Attempt to reinstall damaged stock packages if something went wrong.
# Obviously, you will need to run this after '--remove' and before
# 'removepkg nvidia-driver'.
# User must:
# 1. remove any dangling symlinks and *-xorg, *-nvidia files in /usr/lib*/,
# and any other housekeeping tasks.
# 2. copy stock Slackware packages to /root/Slackware
# 3. be running STOCK Slackware-14.2
# 4. realize that COMPAT32 is not supported ;-)
if [ "$LIBSUFFIX" = "64" ]; then
ARCH="x86_64"
else
ARCH="x86"
fi
PKGPATH="/root/Slackware"
MESA="mesa-11.2.2-$ARCH-1.txz"
MESA32="mesa-compat32-11.2.2-$ARCH-1compat32.txz"
XORG="xorg-server-1.18.3-$ARCH-2.txz"
# Note: The above is for stock 14.2; modify as needed for /patches or
# multilib updates
if [ -d $PKGPATH ]; then
if [ `find $PKGPATH -prune -empty -type d` ]; then
echo "Your $PKGPATH is empty!"
else
upgradepkg --reinstall $MESA $XORG
if [ "COMPAT32" = "yes" ]; then
upgradepkg --reinstall $MESA32
fi
fi
else
echo "Please create $PKGPATH containing the appropriate packages"
fi
}
usage(){
echo "Usage:"
echo " --install Set up nvidia driver files (only during pkg install)"
echo " --remove Return to stock xorg files and remove all symlinks"
echo " --restore Reinstall stock Mesa and xorg-server [EXPERIMENTAL]"
echo " --help Show this help message"
}
case "$1" in
"--install")
nvidia_install
;;
"--remove")
nvidia_remove
;;
"--restore")
restore
;;
"--help")
usage
;;
*)
usage
;;
esac