slackbuilds_ponce/misc/zaptel/rc.zaptel

#!/bin/sh
#
# This shell script takes care of loading and unloading
# Zapata Telephony interfaces
#
# This script is a heavily modified version of zaptel.init found
# in the zaptel source archive and thus is covered under the GNU
# General Public License version 2.
#
# Some parts Copyright 2007, Alan Hicks, Lizella, GA
#

# What modules should we try to load on 'start'?  By default, we'll
# attempt to load the driver for the popular Digium WildCat cards.  If
# this fails or no modules are specified, the ztdummy module will be
# automatically loaded to provide a timing mechanism in the kernel.
# If you need some other modules loaded, seperate them with spaces.
# MODULES="foo bar"
MODULES="wctdm"

ZTCFG_CMD=/sbin/ztcfg
FXOTUNE=/sbin/fxotune
LOCKFILE=/var/lock/subsys/zaptel

# The default syncer Astribank. Usually set automatically to a sane
# value by xpp_sync(1) if you have an Astribank. You can set this to an
# explicit Astribank (e.g: 01).
XPP_SYNC=auto

# The maximal timeout (seconds) to wait for udevd to finish generating 
# device nodes after the modules have loaded and before running ztcfg. 
ZAP_DEV_TIMEOUT=20

#####################################################################
##                                                                 ##
##         NOTHING BELOW HERE SHOULD NEED TO BE CHANGED            ##
##                                                                 ##
#####################################################################

# recursively unload a module and its dependencies, if possible.
# For some reason, modprobe can't seem to remove these modules
# on its own, so we kludge this here.
# inputs: module to unload.
# returns: the result from 
unload_module() {
	module="$1"
	line=$(lsmod 2>/dev/null | grep "^$1 ")
	if [ "$line" = '' ]; then return; fi # module was not loaded

	set -- $line
	# $1: the original module, $2: size, $3: refcount, $4: deps list
	mods=$(echo $4 | tr , ' ')
	# xpp_usb keeps the xpds below busy if an xpp hardware is
	# connected. Hence must be removed before them:
	case "$module" in xpd_*) mods="xpp_usb $mods";; esac
	for mod in $mods; do
		# run in a subshell, so it won't step over our vars:
		(unload_module $mod) 
		# TODO: the following is probably the error handling we want:
		# if [ $? != 0 ]; then return 1; fi
	done
	rmmod $module
}

# I have not tested this function in the least, so I cannot say if it
# works properly with Slackware or not.  If you can, please test this
# and report back any problems or successes you may have so we can fix
# this in the SlackBuild script.  With that said, I don't see any reason
# why this function would not work.
# -- Alan Hicks
hpec_start() {
	# HPEC license found
	if ! echo /var/lib/digium/licenses/HPEC-*.lic | grep -v '\*' | grep -q .; then
		return
	fi

	# zaphpec_enable not installed in /usr/sbin
	if [ ! -f /usr/sbin/zaphpec_enable ]; then
		echo -n "Running zaphpec_enable: Failed"
		echo -n "."
		echo "  The zaphpec_enable binary is not installed in /usr/sbin."
		return
	fi

	# zaphpec_enable not set executable
	if [ ! -x /usr/sbin/zaphpec_enable ]; then
		echo -n "Running zaphpec_enable: Failed"
		echo -n "."
		echo "  /usr/sbin/zaphpec_enable is not set as executable."
		return
	fi

	# zaphpec_enable properly installed
		action "Running zaphpec_enable: " /usr/sbin/zaphpec_enable
	if [ $? = 0 ]; then
		echo -n "done"
		echo "."
	else
		echo -n "Failed"
		echo -n "."
		echo "  This can be caused if you had already run zaphpec_enable, or if your HPEC license is no longer valid."
	fi
}


# Check that telephony is up.
#[ "${TELEPHONY}" = "yes" ] || exit 0

if [ ! -f /etc/zaptel.conf ]; then
   echo "Could not find /etc/zaptel.conf! Abandon ship!"
   exit 1
fi

if [ "${DEBUG}" = "yes" ]; then
	ARGS="debug=1"
fi

RETVAL=0

# See how we were called.
case "$1" in
  start)
	# Load drivers
	rmmod wcusb 2> /dev/null
	rmmod wcfxsusb 2> /dev/null
	rmmod audio 2> /dev/null

	echo "Loading zaptel framework: "
        modprobe zaptel ${ARGS}

	echo -n "Waiting for zap to come online..."
	TMOUT=$ZAP_DEV_TIMEOUT # max secs to wait
	while [ ! -d /dev/zap ] ; do
                echo -n "$TMOUT "
 		sleep 1
		TMOUT=$(expr $TMOUT - 1)
		if [ $TMOUT -eq 0 ] ; then
                        echo " " # line break
			echo "Error: missing /dev/zap!"
			exit 1
		fi
	done
	echo "OK"
	echo -n "Loading zaptel hardware modules:"
	for x in $MODULES; do 
	  if modprobe ${x} ${ARGS} 2> /dev/null; then
	    echo "Loaded module: ${x}."
	  fi
	done
	sleep 3 # TODO: remove it
	
	if [ ! -e /proc/zaptel/1 ]; then
		echo "No functioning zap hardware found in /proc/zaptel, loading ztdummy"
		modprobe ztdummy 2> /dev/null
	fi

        echo "Running ztcfg: " 
        $ZTCFG_CMD 2> /dev/null
	RETVAL=$?

	if [ $RETVAL -eq 0 ]; then
	  touch $LOCKFILE
	else
	  echo "Something went wrong.  Try running ztcfg -vvv."
        fi

	# This is allowed to fail (or not even run).  These files may not
        # be present, and aren't required for Asterisk.
	if [ -x "$FXOTUNE" ] && [ -r /etc/fxotune.conf ]; then
		$FXOTUNE -s || : 
	fi

	hpec_start
	;;
  stop)
	# Unload drivers
	echo -n "Unloading zaptel hardware drivers:"
  	unload_module zaptel
	RETVAL=$?
	echo "."

	[ $RETVAL -eq 0 ] && rm -f $LOCKFILE
	;;
  unload)
	# We don't have zaptel helper, so let's not replicate too much code:
	# allow others to use the unload command.
	unload_module zaptel
	;;
  restart)
	$0 stop
	$0 start
	;;
  reload)
	echo "Reloading ztcfg: "
	if $ZTCFG_CMD 2> /dev/null; then
          echo -n "done"
          RETVAL=0
        else
          echo "ztcfg failed. Are your modules loaded?"
	  RETVAL=1
        fi
	;;
  *)
	echo "Usage: zaptel {start|stop|restart|reload}"
	exit 1
esac

exit $RETVAL