slackbuilds_ponce/audio/mpd/mpd.SlackBuild
Matteo Bernardini c44e92a3ed
audio/mpd: Updated for version 0.23.15.
...fixes building against the newer ffmpeg in current

Signed-off-by: Matteo Bernardini <ponce@slackbuilds.org>

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>
2024-03-09 08:08:20 +07:00

139 lines
4 KiB
Bash

#!/bin/bash
# Slackware build script for mpd
# Copyright 2013-2017 Dhaby Xiloj <slack.dhabyx@gmail.com>
# Based on SlackBuild of Andrew Brouwers <abrouwers@gmail.com>
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# 20220305 bkw: Modified by SlackBuilds.org:
# - add fmt to REQUIRES. without this, it was dowloading the fmt source.
# 20220218 bkw: Modified by SlackBuilds.org:
# - build was failing if libmikmod or libupnp were installed, so I
# updated to the latest version (0.23.5).
# - the version update didn't fix it, so libmikmod and libupnp are
# disabled now (via meson -D options).
# Note to whoever's updating this script in the future: try removing
# the -Dmikmod=disabled and/or -Dupnp=disabled options. Upstream may
# fix the issue at some point.
# 20200411 bkw: not taking this over, but I'm upgrading it to the latest
# release as part of the migration to fluidsynth-2.x.
cd $(dirname $0) ; CWD=$(pwd)
PRGNAM=mpd
VERSION=${VERSION:-0.23.15}
BUILD=${BUILD:-1}
TAG=${TAG:-_SBo}
PKGTYPE=${PKGTYPE:-tgz}
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) ARCH=i586 ;;
arm*) ARCH=arm ;;
*) ARCH=$( uname -m ) ;;
esac
fi
if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
exit 0
fi
TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}
if [ "$ARCH" = "i586" ]; then
SLKCFLAGS="-O2 -march=i586 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "i686" ]; then
SLKCFLAGS="-O2 -march=i686 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi
set -e
# undocumented, but allow disabling pulseaudio
if [ "${PULSE:-yes}" = "yes" ]; then
PULSE="enabled"
else
PULSE="disabled"
fi
rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf $PRGNAM-$VERSION
tar xvf $CWD/$PRGNAM-$VERSION.tar.xz
cd $PRGNAM-$VERSION
chown -R root:root .
find -L . -perm /111 -a \! -perm 755 -a -exec chmod 755 {} \+ -o \
\! -perm /111 -a \! -perm 644 -a -exec chmod 644 {} \+
cd build
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="-L/usr/lib${LIBDIRSUFFIX} -lnsl" \
meson .. \
-Dsystemd=disabled \
-Dpulse=$PULSE \
-Dupnp=disabled \
-Dmikmod=disabled \
--buildtype=release \
--infodir=/usr/info \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--localstatedir=/var \
--mandir=/usr/man \
--prefix=/usr \
--sysconfdir=/etc
"${NINJA:=ninja}"
DESTDIR=$PKG $NINJA install
cd ..
strip $PKG/usr/bin/$PRGNAM
# 20200411 bkw: meson doesn't support --docdir
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
mv $PKG/usr/share/doc/* $PKG/usr/doc/$PRGNAM-$VERSION
rm -rf $PKG/usr/share/doc
# Use sample config, without overwriting
install -D -m 644 doc/mpdconf.example $PKG/etc/mpd.conf.new
[ -d $PKG/usr/man ] && gzip -9 $PKG/usr/man/man*/*
cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cat $CWD/doinst.sh > $PKG/install/doinst.sh
cd $PKG
/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE