system/caprice32: Added (CPC Emulator).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

system/caprice32/README

@@ -0,0 +1,10 @@
+Caprice32 is a software emulator of the Amstrad CPC 8bit home computer
+series. The emulator faithfully imitates the CPC464, CPC664, and CPC6128
+models. By recreating the operations of all hardware components at a low
+level, the emulator achieves a high degree of compatibility with original
+CPC software. These programs or games can be run unmodified at real-time
+or higher speeds, depending on the emulator host environment.
+
+Usage:
+  
+  $ cap32 /path/to/disk

system/caprice32/cap32.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+cd /usr/share/caprice32
+./cap32 $1

system/caprice32/caprice32.SlackBuild

@@ -0,0 +1,95 @@
+#!/bin/sh
+
+# Slackware build script for caprice32
+
+# Copyright 2014 Dimitris Zlatanidis Greece-Orestiada
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=caprice32
+VERSION=${VERSION:-4.2.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+mkdir $PRGNAM-$VERSION
+cd $PRGNAM-$VERSION
+unzip $CWD/$PRGNAM-${VERSION}-src.zip
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+make -f makefile.unix RELEASE=TRUE
+
+mkdir -p $PKG/usr/share/$PRGNAM $PKG/usr/bin
+
+cp -rf rom $PKG/usr/share/$PRGNAM
+install -D -m0755 cap32 $PKG/usr/share/$PRGNAM/cap32
+install -D -m0664 cap32.cfg $PKG/usr/share/$PRGNAM/cap32.cfg
+
+install -D -m0755 $CWD/cap32.sh $PKG/usr/bin/cap32
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $CWD/usage.txt *.txt $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

system/caprice32/caprice32.info

@@ -0,0 +1,10 @@
+PRGNAM="caprice32"
+VERSION="4.2.0"
+HOMEPAGE="https://sourceforge.net/projects/caprice32/"
+DOWNLOAD="http://sourceforge.net/projects/caprice32/files/caprice32/v4.2.0/caprice32-4.2.0-src.zip"
+MD5SUM="f38c9f14ab892710a70b36cd73fa4b91"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Dimitris Zlatanidis"
+EMAIL="d.zlatanidis@gmail.com"

system/caprice32/doinst.sh

@@ -0,0 +1,3 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi

system/caprice32/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+         |-----handy-ruler------------------------------------------------------|
+caprice32: caprice32 (CPC Emulator)
+caprice32:
+caprice32: Caprice32 is a software emulator of the Amstrad CPC 8bit home
+caprice32: computer series. The emulator faithfully imitates the CPC464, CPC664,
+caprice32: and CPC6128 models. By recreating the operations of all hardware
+caprice32: components at a low level, the emulator achieves a high degree of
+caprice32: compatibility with original CPC software. These programs or games can
+caprice32: be run unmodified at real-time or higher speeds, depending on the
+caprice32: emulator host environment.
+caprice32:
+caprice32: Homepage: https://sourceforge.net/projects/caprice32/ 

system/caprice32/usage.txt

@@ -0,0 +1,233 @@
+Caprice32 - Amstrad CPC Emulator
+(c) Copyright 1997-2004 Ulrich Doewich
+
+http://sourceforge.net/projects/caprice32/
+
+..........................................................................
+
+WHAT IS IT?
+~~~~~~~~~~~
+
+Caprice32 is a software emulator of the Amstrad CPC 8bit home computer
+series. The emulator faithfully imitates the CPC464, CPC664, and CPC6128
+models. By recreating the operations of all hardware components at a low
+level, the emulator achieves a high degree of compatibility with original
+CPC software. These programs or games can be run unmodified at real-time
+or higher speeds, depending on the emulator host environment.
+
+
+..........................................................................
+
+USAGE
+~~~~~
+
+This is considered and alpha release, as the emulator in its current
+state lacks a lot of user friendliness (i.e. it lacks a graphical user
+interface).
+
+Open cap32.cfg in a text editor (Notepad for example) and edit values as
+necessary. Refer to the next section for an explanation of what it all
+means. Make especially sure the rom path reference is correct otherwise
+the emulator will fail to start!
+
+To load a disk, snapshot or tape image simply specify the complete path
+to the file on the command line. You can pass more than one type of file
+at the same time - simply separate them with spaces. Paths and filenames
+that contain spaces need to be enclosed by quotes.
+
+
+..........................................................................
+
+THE CONFIG FILE
+~~~~~~~~~~~~~~~
+
+[system]
+
+model
+        Defines the CPC model to emulate CPC464, 664 or 6128
+        Range:   0-2
+        Default: 2
+
+ram_size
+        RAM size in 64K increments
+        Range:   64-576
+        Default: 128
+
+speed
+        emulation speed in 25% increments
+        Range:   2-32
+        Default: 4
+
+keyboard
+        keyboard layout to use
+        Range:   0 = original CPC
+                 1 = French CPC
+                 2 = Spanish CPC
+        Default: 0
+
+[video]
+
+scr_width
+        width of video mode to use for fullscreen display
+        Range:   320-
+        Default: 800
+
+scr_height
+        height of video mode to use for fullscreen display
+        Range:   200-
+        Default: 600
+
+scr_bpp
+        bits per pixel of video mode to use
+        Range:   8,15,16,24,32
+        Default: 8
+
+scr_style
+        rendering style
+        Range:   0 = scanlines
+                 1 = normal size, no scanlines
+                 2 = double width
+                 3 = half size
+                 4 = half size with hardware flip
+                 5 = Super Eagle
+                 6 = Scale2x
+                 7 = Advanced Scale2x
+                 8 = TV 2x
+                 9 = bilinear filter (in software)
+                10 = bicubic filter (in software)
+                11 = dot matrix
+                12 = OpenGL, no scanlines
+                13 = OpenGL, 25% scanlines
+                14 = OpenGL, 50% scanlines
+                15 = OpenGL, 75% scanlines
+                16 = OpenGL, 100% scanlines
+        Default: 0
+
+scr_oglfilter
+        controls whether or not to apply filtering in OpenGL modes
+        Range:   0-1
+        Default: 1
+
+scr_fps
+	controls FPS counter display
+        Range:   0 = hide
+                 1 = show
+        Default: 0
+
+scr_tube
+        colour or green (monochrome) monitor
+        Range:   0 = colour
+                 1 = green
+        Default: 0
+
+scr_intensity
+        colour intensity control
+        Range:   5-15
+        Default: 10
+
+scr_remanency
+        blends the last and current frame together to reduce screen
+        flicker in apps/demos that flip screens quickly to simulate more
+        colours
+        Range:   0-1
+        Default: 0
+
+scr_window
+        start in windowed or fullscreen mode
+        Range:   0 = fullscreen
+                 1 = window
+        Default: 1
+
+[sound]
+
+enabled
+        control sound emulation
+        Range:   0-1
+        Default: 1
+
+playback_rate
+        sound playback frequency in kHz
+        Range:   0 = 11025
+                 1 = 22050
+                 2 = 44100
+                 3 = 48000
+                 4 = 96000
+        Default: 2
+
+bits
+        bits per sample
+        Range:   0 = 8
+                 1 = 16
+        Default: 0
+
+stereo
+        mono or stereo output
+        Range:   0 = mono
+                 1 = stereo
+        Default: 1
+
+volume
+        sound volume in percent
+        Range:   0-100
+        Default: 80
+
+pp_device
+        controls emulation of the DigiBlaster on the CPC printer port
+        Range:   0-1
+        Default: 0
+
+[control]
+
+kbd_layout
+        the PC keyboard layout
+        Range:   0 = US
+                 1 = French
+                 2 = Spanish
+        Default: 0
+
+[file]
+
+drvA_path
+        path to a DSK file, or PATH+ZIP for a ZIPped up DSK
+
+drvA_file
+        name of the DSK file
+
+drvA_zip
+        indicates whether or not we're dealing with a compressed DSK
+        image
+        Range:   0-1
+
+
+..........................................................................
+
+KEYS
+~~~~
+
+F1       switch between windowed / fullscreen mode
+Ctrl+F3  PLAY button on virtual tape deck
+F5       reset
+Ctrl+F8  toggle joystick emulation on / off
+F10      quit
+F12      toggle regular / full speed
+Ctrl+F12 show / hide FPS (Frames Per Second) counter
+
+..........................................................................
+
+SOURCE CODE AVAILABILITY
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+The most recent source code release is always available from the
+Caprice32 project page on SourceForge.net - see the URL at the top.
+
+
+..........................................................................
+
+COMMENTS OR READY TO CONTRIBUTE?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you have suggestions, a bug report or even want to join the
+development team, please feel free to use one of the many contact methods
+presented on the Caprice32 project page on SourceForge.net - see the URL
+at the top.
+