From ebb74a41954189ba353a7e00040ed6efc372f6f8 Mon Sep 17 00:00:00 2001 From: Christopher Walker Date: Fri, 11 Sep 2015 01:37:21 +0700 Subject: [PATCH] network/openvswitch: Updated for version 2.3.2. Signed-off-by: Willy Sudiarto Raharjo --- network/openvswitch/openvswitch.SlackBuild | 4 +- network/openvswitch/openvswitch.info | 6 +- network/openvswitch/xen/README | 39 ------ network/openvswitch/xen/network-openvswitch | 124 -------------------- network/openvswitch/xen/vif-openvswitch | 86 -------------- 5 files changed, 5 insertions(+), 254 deletions(-) delete mode 100644 network/openvswitch/xen/README delete mode 100644 network/openvswitch/xen/network-openvswitch delete mode 100644 network/openvswitch/xen/vif-openvswitch diff --git a/network/openvswitch/openvswitch.SlackBuild b/network/openvswitch/openvswitch.SlackBuild index 18229adba0..389bef4bf9 100644 --- a/network/openvswitch/openvswitch.SlackBuild +++ b/network/openvswitch/openvswitch.SlackBuild @@ -23,8 +23,8 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=openvswitch -VERSION=${VERSION:-2.3.1} -BUILD=${BUILD:-2} +VERSION=${VERSION:-2.3.2} +BUILD=${BUILD:-1} TAG=${TAG:-_SBo} KERNEL=${KERNEL:-$(uname -r)} diff --git a/network/openvswitch/openvswitch.info b/network/openvswitch/openvswitch.info index b61073006d..3ccf422da6 100644 --- a/network/openvswitch/openvswitch.info +++ b/network/openvswitch/openvswitch.info @@ -1,8 +1,8 @@ PRGNAM="openvswitch" -VERSION="2.3.1" +VERSION="2.3.2" HOMEPAGE="http://openvswitch.org" -DOWNLOAD="http://openvswitch.org/releases/openvswitch-2.3.1.tar.gz" -MD5SUM="c008c1de0a8b6363b37afa599105d6d6" +DOWNLOAD="http://openvswitch.org/releases/openvswitch-2.3.2.tar.gz" +MD5SUM="5a5739ed82f1accac1c2d8d7553dc88f" DOWNLOAD_x86_64="" MD5SUM_x86_64="" REQUIRES="" diff --git a/network/openvswitch/xen/README b/network/openvswitch/xen/README deleted file mode 100644 index 93889615e7..0000000000 --- a/network/openvswitch/xen/README +++ /dev/null @@ -1,39 +0,0 @@ -Here are some scripts that I've written for use with Xen at my site. -In order to use these scripts with your Xen installation you'll need to copy -both the network-openvswitch and vif-openvswitch files to your -/etc/xen/scripts directory. You can instruct Xen to use these scripts by -editing your /etc/xen/xend-config.sxp file and specifying these scripts as -the default network-script and vif-script. - -For example, here are the entries in my xend-config.sxp file: - - (network-script 'network-openvswitch netdev=eth2 bridge=ovs0') - - (vif-script 'vif-openvswitch bridge=ovs0') - -If your network interface card and attached network switch support VLAN -tagged traffic, you can place virtual machines within a seperate VLAN by -appending a '.' and the VLAN tag number you wish the domain to use. For -example, to have all domains default to VLAN 2 you can do the following: - - (vif-script 'vif-openvswitch bridge=ovs0.2') - -You can also specify tagged traffic in the domain configuration file. - -If you are hosting a hardware virtualized domain understand that the -/etc/xen/scripts/qemu-ifup script is run instead of the vif-script specified -in the xend-config.sxp file. You'll need to edit this file to add the port -to the vswitch instead of using the brctl (unless of course you are using -the appropriate kernel module to control the vswitch using brctl.) Here is -a snippet from my qemu-ifup to handle hardware virtualized ports: - - if lsmod | grep -c openvswitch_mod 1> /dev/null && ! lsmod | grep -c brcompat_mod 1> /dev/null - then - ovs-vsctl -- --may-exist add-port $bridge $1 - else - brctl addif $bridge $1 || true - fi - -This doesn't handle tagged traffic. I'll leave that as an exercise for you. - -Enjoy. diff --git a/network/openvswitch/xen/network-openvswitch b/network/openvswitch/xen/network-openvswitch deleted file mode 100644 index 45cda0b195..0000000000 --- a/network/openvswitch/xen/network-openvswitch +++ /dev/null @@ -1,124 +0,0 @@ -#!/bin/bash -#============================================================================ -# Default Xen network start/stop script. -# Xend calls a network script when it starts. -# The script name to use is defined in ${XEN_CONFIG_DIR}/xend-config.sxp -# in the network-script field. -# -# This script creates a virtual switch (default ${netdev}) and adds a -# device (defaults to eth0) to it. The interface that this Open vSwitch -# is created on should not have a working IP address and will be used as -# a switch for Xen domU's. -# -# Usage: -# network-openvswitch (start|stop|status) {VAR=VAL}* -# -# Vars: -# bridge The bridge to use (default xenvs0). -# netdev The interface to add to the bridge (default eth0). This -# device should not be configured with an IP address. If so -# this script will tear down the interface and bring it back up -# without an IP address. -# -# start: -# Creates the bridge as bridge -# Enslaves netdev to bridge -# -# stop: -# Removes netdev from the bridge -# Deletes bridge -# -# status: -# Print addresses, interfaces -# -#============================================================================ - -dir=$(dirname "$0") -. "$dir/logging.sh" -. "$dir/xen-script-common.sh" -. "$dir/xen-network-common.sh" -. "$dir/locking.sh" - -findCommand "$@" -evalVariables "$@" - -netdev=${netdev:-eth0} -bridge=${bridge:-ovs0} - -addr=`ip addr show dev ${netdev} | egrep '^ *inet' | sed -e 's/ *inet //' -e 's/ .*//'` -if [ -n "$addr" ]; then - echo "Invalid device: ${netdev} is up and has a valid IP address!" >&2 - exit 1 -fi - -show_status () { - local dev=$1 - local bridge=$2 - - echo '============================================================' - echo 'vSwitch interfaces' - ovs-vsctl list-ifaces ${bridge} - echo ' ' - echo 'vSwitch ports' - ovs-vsctl list-ports ${bridge} - echo '============================================================' -} - -op_start () { - if [ "${bridge}" = "null" ] ; then - return - fi - - ifconfig "${netdev}" down - ifconfig "${netdev}" 0.0.0.0 up - ovs-vsctl -- --may-exist add-br ${bridge} - ifconfig "${bridge}" 0.0.0.0 up - ovs-vsctl -- --may-exist add-port ${bridge} ${netdev} - - # Remove any stale ports from last time virtual switch was running. - # Open vSwitch has the habit of remembering port settings between - # runs. - for port in $(ovs-vsctl list-ports ${bridge}) - do - if [ "${port}" != "${netdev}" ] - then - ifconfig "${port}" down - ovs-vsctl del-port ${port} - fi - done -} - -op_stop () { - if [ "${bridge}" = "null" ]; then - return - fi - - # Remove all ports from virtual switch. - for port in $(ovs-vsctl list-ports ${bridge}) - do - ifconfig "${port}" down - ovs-vsctl del-port ${port} - done - - ifconfig "${bridge}" down - ovs-vsctl -- --if-exists del-br ${bridge} -} - -case "$command" in - start) - op_start - ;; - - stop) - op_stop - ;; - - status) - show_status ${netdev} ${bridge} - ;; - - *) - echo "Unknown command: $command" >&2 - echo 'Valid commands are: start, stop, status' >&2 - exit 1 -esac diff --git a/network/openvswitch/xen/vif-openvswitch b/network/openvswitch/xen/vif-openvswitch deleted file mode 100644 index 4374d41d02..0000000000 --- a/network/openvswitch/xen/vif-openvswitch +++ /dev/null @@ -1,86 +0,0 @@ -#!/bin/bash -#============================================================================ -# ${XEN_SCRIPT_DIR}/vif-openvswitch -# -# Script for configuring a vif using Open vSwitch. -# -# Usage: -# vif-openvswitch (add|remove|online|offline) -# -# Environment vars: -# vif vif interface name (required). -# XENBUS_PATH path to this device's details in the XenStore (required). -# -# Read from the store: -# bridge bridge to add the vif to (optional). Defaults to searching for the -# bridge itself. -# -# up: -# Enslaves the vif interface to the bridge. -# -# down: -# Removes the vif interface from the bridge. -#============================================================================ - -dir=$(dirname "$0") -. "$dir/vif-common.sh" - -bridge=${bridge:-} -bridge=$(xenstore_read_default "$XENBUS_PATH/bridge" "$bridge") - -if [ -z "${bridge}" ] -then - bridge=$(ovs-vsctl list-br | cut -d " -" -f 1) - - if [ -z "${bridge}" ] - then - fatal "Could not find bridge and none was specified" - fi -fi - -tag=${tag:-} - -# Domain on VLAN tagged bridge? -RET=0 -ovs-vsctl list-br | grep -c ${bridge} 1>/dev/null 2>&1 || RET=1 -if [ $RET -eq 1 ] -then - if [[ $bridge =~ \.[[:digit:]]{1,4}$ ]] - then - tag=$(echo ${bridge} | cut -d "." -f 2) - bridge=$(echo ${bridge} | cut -d "." -f 1) - else - fatal "Could not find bridge device ${bridge}" - fi -fi - -RET=0 -ovs-vsctl list-br | grep -c ${bridge} 1>/dev/null 2>&1 || RET=1 -if [ $RET -eq 1 ] -then - fatal "Could not find bridge device ${bridge}" -fi - -log debug "Successful vif-bridge $command for ${vif}, bridge ${bridge}." -case "$command" in - online) - ifconfig "${vif}" 0.0.0.0 up - if [ -z $tag ] - then - ovs-vsctl -- --may-exist add-port ${bridge} ${vif} - else - ovs-vsctl -- --may-exist add-port ${bridge} ${vif} tag=${tag} - fi - ;; - - offline) - ovs-vsctl -- --if-exists del-port ${bridge} ${vif} - ifconfig "$vif" 0.0.0.0 down - ;; -esac - -if [ "$command" == "online" ] -then - success -fi