libraries/libbde: Added (libYAL BitLocker library).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

libraries/libbde/README

@@ -0,0 +1,25 @@
+libbde (libYAL BitLocker library)
+
+Library and tools to access the BitLocker Drive Encryption (BDE) format. 
+The BDE format is used by Windows, as of Vista, to encrypt data on a storage 
+media volume.
+
+Supported BDE formats:
+
+    -BitLocker Windows Vista
+    -BitLocker Windows 7
+    -BitLocker Windows 8 (Consumer Preview)
+    -BitLocker To Go 
+
+Supported protection methods:
+
+    -clear key
+    -password
+    -recovery password
+    -start-up key
+    -FKEV and/or TWEAK key data 
+
+Additional features:
+
+    -support for partial encrypted volumes
+    -zeros out the BDE metadata, matches behavior seen on Windows 

libraries/libbde/libbde.SlackBuild

@@ -0,0 +1,101 @@
+#!/bin/sh
+
+# Slackware build script for libbde
+
+# Copyright 2014 Barry J. Grundy (bgrundy<at>linuxleo.com)
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Updated v20141023 December 2014 Barry J. Grundy <bgrundy(at)linuxleo.com
+
+PRGNAM=libbde
+STATUS=${STATUS:-alpha}
+VERSION=${VERSION:-20141023}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$STATUS-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --disable-static \
+  --enable-python \
+  --build=$ARCH-slackware-linux
+
+make
+make install-strip DESTDIR=$PKG
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -ar ABOUT-NLS AUTHORS ChangeLog COPYING INSTALL README* $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

libraries/libbde/libbde.info

@@ -0,0 +1,10 @@
+PRGNAM="libbde"
+VERSION="alpha-20141023"
+HOMEPAGE="https://github.com/libyal/libbde"
+DOWNLOAD="https://github.com/libyal/libbde/releases/download/20141023/libbde-alpha-20141023.tar.gz"
+MD5SUM="63e9a2390d6d4de4009dd71f3de74e70"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Barry J. Grundy"
+EMAIL="bgrundy<at>linuxleo.com"

libraries/libbde/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+libbde: libbde (libYAL BitLocker library)
+libbde: 
+libbde: Library and tools to access the BitLocker Drive Encryption (BDE)
+libbde: format.  The BDE format is used by Windows, as of Vista, to encrypt
+libbde: data on a storge media volume.
+libbde: 
+libbde: Homepage: http://code.google.com/p/libbde/
+libbde:
+libbde:
+libbde:
+libbde: