system/ipheth-driver: Added (iPhone USB Ethernet Driver)

Signed-off-by: dsomero <xgizzmo@slackbuilds.org>

system/ipheth-driver/README

@@ -0,0 +1,14 @@
+This is a Linux Kernel driver that adds support for iPhone tethering through
+USB cables. Unlike other solutions out there, you don't need to jailbreak your
+phone or install third-party proxy applications.
+
+Attention: The ipheth kernel module has been accepted upstream as of Apr 21
+2010 for kernel 2.6.34.
+
+This module is still useful if you're running the stock Slackware kernel or
+the 2.6.33 tree. You still need an iPhone pairing program: this package will
+configure by default a modprobe helper based on ipheth-pair, an optional
+helper based on idevicepair from latest libimobiledevice releases is also
+provided.
+
+This package requires ipheth-pair.

system/ipheth-driver/README.SLACKWARE

@@ -0,0 +1,6 @@
+By default, this package will install a modprobe configuration which uses
+ipheth-pair as pairing program. Latest libimobiledevice releases ship with a
+copy of idevicepair. An alternate modprobe configuration file for the newer
+program is shipped too in this folder. If you're going to use it, you may also
+want to modify /etc/udev/rules.d/90-iphone-tether.rules and just keep in mind
+that this method hasn't been fully tested so YMMV :)

system/ipheth-driver/doinst.sh

@@ -0,0 +1,16 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/modprobe.d/ipheth.conf.new
+
+chroot . /sbin/depmod -a @KERNEL@

system/ipheth-driver/ipheth-driver.SlackBuild

@@ -0,0 +1,81 @@
+#!/bin/sh
+
+# Slackware build script for ipheth-driver.
+#
+# Copyright 2010-2011 Marco Bonetti <sid77@slackware.it>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=ipheth-driver
+VERSION=${VERSION:-1.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+KERNEL=${KERNEL:-$(uname -r)}
+PKG_VERS=${VERSION}_$(echo $KERNEL | tr - _)
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=${PKG:-$TMP/package-$PRGNAM}
+OUTPUT=${OUTPUT:-/tmp}
+
+DOCS="$CWD/README.SLACKWARE $CWD/ipheth.conf.idevicepair"
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+make
+
+mkdir -p $PKG/lib/modules/$KERNEL/extra
+install -m 0644 ipheth.ko $PKG/lib/modules/$KERNEL/extra/
+mkdir -p $PKG/etc/modprobe.d/
+install -m 0644 $CWD/ipheth.conf.ipheth-pair $PKG/etc/modprobe.d/ipheth.conf.new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$PKG_VERS
+install -m 0644 $DOCS $PKG/usr/doc/$PRGNAM-$PKG_VERS
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$PKG_VERS/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+sed "s%@KERNEL@%$KERNEL%" $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$PKG_VERS-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

system/ipheth-driver/ipheth-driver.info

@@ -0,0 +1,10 @@
+PRGNAM="ipheth-driver"
+VERSION="1.0"
+HOMEPAGE="http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver"
+DOWNLOAD="http://slackbuilds.org/sources/13.1/ipheth-driver-1.0.tar.bz2"
+MD5SUM="cb6a3358da60aa2c94b21ba258aa03a0"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Marco Bonetti"
+EMAIL="sid77@slackware.it"
+APPROVED="dsomero"

system/ipheth-driver/ipheth.conf.idevicepair

@@ -0,0 +1,8 @@
+# iPhone USB Ethernet Driver
+#
+# This configuration forces modprobe to execute device pairing after loading
+# the driver and device unpairing before removing it.
+
+install ipheth /sbin/modprobe --ignore-install ipheth && /usr/bin/idevicepair pair
+remove ipheth /usr/bin/idevicepair unpair && /sbin/modprobe -r --ignore-remove ipheth
+

system/ipheth-driver/ipheth.conf.ipheth-pair

@@ -0,0 +1,7 @@
+# iPhone USB Ethernet Driver
+#
+# This configuration forces modprobe to execute device pairing after loading
+# the driver.
+
+install ipheth /sbin/modprobe --ignore-install ipheth && /lib/udev/ipheth-pair
+

system/ipheth-driver/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+ipheth-driver: ipheth-driver (iPhone USB Ethernet Driver)
+ipheth-driver:
+ipheth-driver: This is a Linux Kernel driver that adds support for iPhone tethering
+ipheth-driver: through USB cables. Unlike other solutions out there, you don't need
+ipheth-driver: to jailbreak your phone or install third-party proxy applications.
+ipheth-driver:
+ipheth-driver: This driver has been accepted into 2.6.34+ kernels so it's only useful
+ipheth-driver: if you're running on older versions.
+ipheth-driver:
+ipheth-driver: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
+ipheth-driver: