development/viewvc: Added (cvs/svn browser interface)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

development/viewvc/README

@@ -0,0 +1,7 @@
+ViewVC is a browser interface for CVS and Subversion version control
+repositories. It generates templatized HTML to present navigable directory,
+revision, and change log listings. It can display specific versions of files 
+as well as diffs between those versions.
+
+Installing Pygments (available on SlackBuilds) will improve your ViewVC
+experience (highlighting changes)

development/viewvc/README.SLACKWARE

@@ -0,0 +1,38 @@
+README.SLACKWARE
+================
+
+After installing the package, follow these minimal steps to setup ViewVC:
+
+1) Edit /etc/viewvc.conf
+------------------------
+
+At least set 'svn_roots' or 'cvs_roots' to your local repository.
+
+This configuration file is very well documented, so do read through it.
+
+2) Edit /etc/httpd/httpd.conf
+-----------------------------
+
+Look for the section where the ScriptAliases are defined and add:
+
+	ScriptAlias /viewvc "/opt/viewvc/bin/cgi/viewvc.cgi"
+
+Also add this section to allow access to the scripts:
+
+	<Directory "/opt/viewvc/bin/cgi">
+	    AllowOverride None
+	    Options None
+	    Order allow,deny
+	    Allow from all
+	</Directory>
+
+3) Restart httpd
+----------------
+
+# /etc/rc.d/rc.httpd restart
+
+4) Read the documentation!
+--------------------------
+
+Read at least the INSTALL document in /usr/doc/viewvc-<version>/ and check
+for more documentation at http://viewvc.tigris.org/

development/viewvc/doinst.sh

@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+find etc/viewvc/ -name *.new | while read cfg ; do config $cfg ; done
+

development/viewvc/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+viewvc: viewvc (browser interface for cvs and svn)
+viewvc:
+viewvc: ViewVC is a browser interface for CVS and Subversion version control
+viewvc: repositories. It generates templatized HTML to present navigable
+viewvc: directory, revision, and change log listings. It can display specific
+viewvc: versions of files as well as diffs between those versions.
+viewvc:
+viewvc: Homepage: http://www.viewvc.org/
+viewvc:
+viewvc:
+viewvc:

development/viewvc/viewvc.SlackBuild

@@ -0,0 +1,84 @@
+#!/bin/sh
+
+# Slackware build script for viewvc
+# a browser interface for cvs and svn
+
+# Written by Niels Horn <niels.horn@gmail.com>
+# Revision date: 2010/06/13
+
+PRGNAM=viewvc
+VERSION=${VERSION:-1.1.6}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Use included "install" script
+cat << EOF | ./viewvc-install
+/opt/$PRGNAM
+$PKG
+EOF
+
+# Move configuration files to /etc/
+mkdir -p $PKG/etc/$PRGNAM
+for i in $( find $PKG/opt/$PRGNAM/*.conf ); do 
+  j=$(basename $i)
+  mv $i $PKG/etc/$PRGNAM/$j.new
+  ln -sf ../../etc/$PRGNAM/$j $i
+done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  CHANGES COMMITTERS INSTALL LICENSE.html README \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

development/viewvc/viewvc.info

@@ -0,0 +1,10 @@
+PRGNAM="viewvc"
+VERSION="1.1.6"
+HOMEPAGE="http://www.viewvc.org/"
+DOWNLOAD="http://viewvc.tigris.org/files/documents/3330/47623/viewvc-1.1.6.tar.gz"
+MD5SUM="9b0fd59fe4410dfc809d9b7d07f9baf6"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Niels Horn"
+EMAIL="niels.horn@gmail.com"
+APPROVED="rworkman"