diff --git a/system/haveged/README b/system/haveged/README deleted file mode 100644 index 187b3bdda9..0000000000 --- a/system/haveged/README +++ /dev/null @@ -1,27 +0,0 @@ -haveged (a simple entropy-gathering daemon) - -The haveged project is an attempt to provide an easy-to-use, unpredictable -random number generator based upon an adaptation of the HAVEGE algorithm. -Haveged was created to remedy low-entropy conditions in the Linux random -device that can occur under some workloads, especially on headless servers. - -The HAVEGE algorithm is based upon the indirect effects of unrelated hardware -events on the instruction timing of a calculation that is sensitive to -processor features such as branch predictors and instruction/data access -mechanisms. -Samples from a high-resolution timer are input into the algorithm to -produce a stream of random data in a collection buffer. The contents of this -buffer can be fed into the random device or accessed directly through the -file system. File system access is a useful alternative to those situations -where use of the random device is either inappropriate or not available. - -Add the following snippet to your /etc/rc.d/rc.M to start up haveged at boot: - -# Starting HAVEGED entropy daemon -if [ -x /etc/rc.d/rc.haveged ]; then - /etc/rc.d/rc.haveged start -fi - -You can see how many bits of entropy are available to the system by reading -the /proc/sys/kernel/random/entropy_avail file, and check the size of your -entropy pool at /proc/sys/kernel/random/poolsize. diff --git a/system/haveged/doinst.sh b/system/haveged/doinst.sh deleted file mode 100644 index b9e90c8608..0000000000 --- a/system/haveged/doinst.sh +++ /dev/null @@ -1,28 +0,0 @@ -config() { - for infile in $1; do - NEW="$infile" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then - # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... - done -} - -preserve_perms() { - NEW="$1" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - if [ -e $OLD ]; then - cp -a $OLD ${NEW}.incoming - cat $NEW > ${NEW}.incoming - mv ${NEW}.incoming $NEW - fi - config $NEW -} - -preserve_perms etc/rc.d/rc.haveged.new - diff --git a/system/haveged/haveged.SlackBuild b/system/haveged/haveged.SlackBuild deleted file mode 100644 index 0d5e97f692..0000000000 --- a/system/haveged/haveged.SlackBuild +++ /dev/null @@ -1,121 +0,0 @@ -#!/bin/sh - -# Slackware build script for haveged - -# Copyright 2018 Erik Falor, Logan, Utah, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Modified by Nikos Giotis 20170903, Athens, GR -# Use static building -# Changed install target to /sbin, /lib[64] -# Added check for existing installation due to problems when rebuilding -# produces binary that segfaults if any previous installation is there - -PRGNAM=haveged -VERSION=${VERSION:-1.9.2} -BUILD=${BUILD:-1} -TAG=${TAG:-_SBo} - -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) ARCH=i586 ;; - arm*) ARCH=arm ;; - *) ARCH=$( uname -m ) ;; - esac -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp/SBo} -PKG=$TMP/package-$PRGNAM -OUTPUT=${OUTPUT:-/tmp} - -if [ "$ARCH" = "i586" ]; then - SLKCFLAGS="-O2 -march=i586 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -set -e - -# Try to detect any previous installations and bail out if true -if [ -f "/usr/lib$LIBDIRSUFFIX/libhavege.so" -o \ - -f "/usr/lib$LIBDIRSUFFIX/libhavege.a" -o \ - -f "/lib$LIBDIRSUFFIX/libhavege.so" -o \ - -f "/lib$LIBDIRSUFFIX/libhavege.a" ]; then - echo 'Detected libhaveged!' >&2 - echo 'Please remove libhaveged before building a new one.' >&2 - exit 1 -fi - -rm -rf $PKG -mkdir -p $TMP $PKG $OUTPUT -cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz -cd $PRGNAM-$VERSION -chown -R root:root . -find -L . \ - \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ - -o -perm 511 \) -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ - -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; - -# Static build for easier inclusion in initrd -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -LDFLAGS="-static" \ -./configure \ - --prefix=/usr \ - --sbindir=/sbin \ - --libdir=/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --localstatedir=/var \ - --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ - --build=$ARCH-slackware-linux - -make -make install-strip DESTDIR=$PKG - -rm -rf $PKG/etc/init.d -install -D -m0755 -oroot -groot $CWD/rc.haveged $PKG/etc/rc.d/rc.haveged.new - -find $PKG/usr/man -type f -exec gzip -9 {} \; -for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done - -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a AUTHORS COPYING ChangeLog INSTALL README \ - $PKG/usr/doc/$PRGNAM-$VERSION -cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -cat $CWD/doinst.sh > $PKG/install/doinst.sh - -cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/system/haveged/haveged.info b/system/haveged/haveged.info deleted file mode 100644 index ea62f1b72e..0000000000 --- a/system/haveged/haveged.info +++ /dev/null @@ -1,10 +0,0 @@ -PRGNAM="haveged" -VERSION="1.9.2" -HOMEPAGE="http://www.issihosts.com/haveged/index.html" -DOWNLOAD="http://www.issihosts.com/haveged/haveged-1.9.2.tar.gz" -MD5SUM="fb1d8b3dcbb9d06b30eccd8aa500fd31" -DOWNLOAD_x86_64="" -MD5SUM_x86_64="" -REQUIRES="" -MAINTAINER="Erik Falor" -EMAIL="ewfalor@gmail.com" diff --git a/system/haveged/rc.haveged b/system/haveged/rc.haveged deleted file mode 100644 index 404d9ca800..0000000000 --- a/system/haveged/rc.haveged +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/sh -# Start/stop/restart haveged. - -PIDFILE=/var/run/haveged.pid -HAVEGED_OPTS="-w 1024 -v 1 -p $PIDFILE" - -# Start haveged: -haveged_start() { - if [ -f $PIDFILE ]; then - echo "HAVEGE daemon is already running as PID $(cat $PIDFILE) " >&2 - exit 3 - elif [ -x /sbin/haveged ]; then - echo "Starting HAVEGE daemon: /sbin/haveged" - /sbin/haveged $HAVEGED_OPTS - fi -} - -# Stop haveged: -haveged_stop() { - if [ -r /var/run/haveged.pid ]; then - kill $(cat /var/run/haveged.pid) - else - killall haveged - fi -} - -# Restart haveged: -haveged_restart() { - haveged_stop - sleep 1 - haveged_start -} - -case "$1" in -'start') - haveged_start - ;; -'stop') - haveged_stop - ;; -'restart') - haveged_restart - ;; -*) - echo "usage $0 start|stop|restart" - exit 2 -esac diff --git a/system/haveged/slack-desc b/system/haveged/slack-desc deleted file mode 100644 index 55d8f9ed50..0000000000 --- a/system/haveged/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -haveged: haveged (A simple entropy daemon) -haveged: -haveged: The haveged project is an attempt to provide an easy-to-use, -haveged: unpredictable random number generator based upon an adaptation of the -haveged: HAVEGE algorithm. Haveged was created to remedy low-entropy -haveged: conditions in the Linux random device that can occur under some -haveged: workloads, especially on headless servers. -haveged: -haveged: -haveged: -haveged: