network/heimdal: Added (KTH Heimdal Kerberos)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

network/heimdal/README

@@ -0,0 +1,10 @@
+Heimdal is a free implementation of Kerberos 5. The goals are to:
+* have an implementation that can be freely used by anyone
+* be protocol compatible with existing implementations and, if not 
+  in conflict, with RFC 4120 (and any future updated RFC).  
+  RFC 4120 replaced RFC 1510.
+* be reasonably compatible with the M.I.T Kerberos V5 API
+* have support for Kerberos V5 over GSS-API (RFC1964)
+* include the most important and useful application programs 
+  (rsh, telnet, popper, etc.)
+* include enough backwards compatibility with Kerberos V4 

network/heimdal/config/heimdal.csh

@@ -0,0 +1,8 @@
+#!/bin/csh
+
+setenv MANPATH ${MANPATH}:/usr/heimdal/man
+
+setenv PATH "${PATH}:/usr/heimdal/bin"
+if ( x"$uid" == x"0" ) then
+  setenv PATH "${PATH}:/usr/heimdal/sbin"
+endif

network/heimdal/config/heimdal.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+MANPATH="$MANPATH:/usr/heimdal/man"
+export MANPATH
+
+PATH="${PATH}:/usr/heimdal/bin"
+if [ x"${EUID}" == x"0" ]; then
+  PATH="${PATH}:/usr/heimdal/sbin"
+fi
+export PATH

network/heimdal/config/kdc.conf

@@ -0,0 +1,20 @@
+# Leave this section out on the clients
+[kdc]
+        # Space seperated list of addresses to listen for requests on.  
+        #addresses = 192.168.0.1 172.16.0.1 10.0.0.1
+
+        # Following directive is needed when KDC starts atomatically
+        require-preauth = no
+
+        # database key file
+        key-file = /var/heimdal/key-file
+
+        # Check the addresses in the ticket when processing TGS requests.
+        check-ticket-addresses = TRUE
+
+        # Permit tickets with no addresses.
+        #allow-null-ticket-addresses = TRUE
+
+        # Permit anonymous tickets with no addresses.
+        #allow-anonymous = TRUE
+

network/heimdal/config/rc.heimdal

@@ -0,0 +1,36 @@
+#!/bin/sh
+
+heimdal_start() {
+  if [ -r /var/heimdal/kdc.conf -a -x /usr/heimdal/libexec/kdc ]; then
+    echo "Starting the Kerberos service:  /usr/heimdal/libexec/kdc --detach"
+    /usr/heimdal/libexec/kdc --detach
+  fi
+
+}
+
+heimdal_stop() {
+  killall kdc
+
+}
+
+heimdal_restart() {
+  heimdal_stop
+  sleep 1
+  heimdal_start
+
+}
+
+case "$1" in
+'start')
+  heimdal_start
+  ;;
+'stop')
+  heimdal_stop
+  ;;
+'restart')
+  heimdal_restart
+  ;;
+*)
+  echo "Usage: $0 start|stop|restart"
+esac
+

network/heimdal/doinst.sh

@@ -0,0 +1,35 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.heimdal.new
+config etc/krb5.conf-sample.new
+config var/heimdal/kdc.conf-sample.new
+config etc/profile.d/heimdal.sh.new
+config etc/profile.d/heimdal.csh.new
+
+# Add heimdal libs to the library search path
+if ! grep -q '^/usr/heimdal/lib$' etc/ld.so.conf ; then
+  echo "/usr/heimdal/lib" >> etc/ld.so.conf
+fi
+

network/heimdal/heimdal.SlackBuild

@@ -0,0 +1,128 @@
+#!/bin/sh
+
+# Slackware build script for KTH Heimdal Kerberos
+
+# Written by Menno Duursma <druiloor@zonnet.nl>
+# Modified by the SlackBuilds.org project
+# Modified by Thibaut Notteboom <tib@tibux.org>
+
+# This program is free software. It comes without any warranty.
+# Granted WTFPL, Version 2, as published by Sam Hocevar. See
+# http://sam.zoy.org/wtfpl/COPYING for more details.
+
+PRGNAM=heimdal
+VERSION=${VERSION:-1.5.1}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e # Exit immediately if a command exits with a non-zero status.
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 \
+  -o -perm 400 \) -exec chmod 644 {} \;
+
+# Note about OpenLDAP:
+# The openldap-client package is part of Slackware since the 11.0 release.
+# If you want to store your KDC database in LDAP, you will need to configure
+# Heimdal with support for OpenLDAP:
+# Replace this:  "--without-openldap"  with this:  "--with-openldap=/usr"
+# in the configure lines below
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr/heimdal \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --infodir=/usr/info \
+  --mandir=/usr/heimdal/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --build=$ARCH-slackware-linux \
+  --enable-shared=yes \
+  --disable-otp \
+  --without-openldap \
+  --without-hesiod \
+  --without-ipv6 \
+  --enable-kcm \
+  --with-x
+
+make
+make install-strip DESTDIR=$PKG
+
+rm -rf $PKG/usr/heimdal/man/cat?   # We don't want these
+find $PKG/usr/heimdal/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/heimdal/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+rm -f $PKG/usr/info/dir
+gzip -9 $PKG/usr/info/*
+( cd $PKG/usr/info ; ln -s heimdal.info.gz heimdal )
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a [A-Z][A-Z]* ChangeLog* etc/services.append $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a doc/{init-creds,layman.asc,mdate-sh} $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/inittab-heimdal.patch > $PKG/usr/doc/$PRGNAM-$VERSION/inittab-heimdal.patch
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+find $PKG/usr/doc -type f -exec chmod -x {} \;
+
+# Add sample krb5.conf file (may not be needed)
+mkdir -p $PKG/etc
+cat krb5.conf > $PKG/etc/krb5.conf-sample.new
+
+# Create directory for the KDC to use
+mkdir -p $PKG/var/heimdal
+
+# Add sample kdc.conf file (may not be needed)
+cat $CWD/config/kdc.conf > $PKG/var/heimdal/kdc.conf-sample.new
+
+# Include a KDC rc-file for the admin to consider
+mkdir -p $PKG/etc/rc.d
+cat $CWD/config/rc.heimdal > $PKG/etc/rc.d/rc.heimdal.new
+
+# Add heimdal to INFOPATH, MANPATH, and PATH
+mkdir -p $PKG/etc/profile.d
+cat $CWD/config/heimdal.sh > $PKG/etc/profile.d/heimdal.sh.new
+cat $CWD/config/heimdal.csh > $PKG/etc/profile.d/heimdal.csh.new
+chmod 0755 $PKG/etc/profile.d/*
+
+mkdir $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

network/heimdal/heimdal.info

@@ -0,0 +1,10 @@
+PRGNAM="heimdal"
+VERSION="1.5.1"
+HOMEPAGE="http://www.h5l.org"
+DOWNLOAD="http://www.h5l.org/dist/src/heimdal-1.5.1.tar.gz"
+MD5SUM="0709951e91560f788b4b7cb125604b2b"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Thibaut Notteboom"
+EMAIL="tib@tibux.org"
+APPROVED="rworkman"

network/heimdal/inittab-heimdal.patch

@@ -0,0 +1,21 @@
+--- /etc/inittab	2011-11-22 00:05:33.883260270 +0100
++++ /etc/inittab-heimdal	2011-11-21 23:45:38.922009963 +0100
+@@ -49,12 +49,12 @@
+ pg::powerokwait:/sbin/genpowerfail stop
+ 
+ # These are the standard console login getties in multiuser mode:
+-c1:12345:respawn:/sbin/agetty 38400 tty1 linux
+-c2:12345:respawn:/sbin/agetty 38400 tty2 linux
+-c3:12345:respawn:/sbin/agetty 38400 tty3 linux
+-c4:12345:respawn:/sbin/agetty 38400 tty4 linux
+-c5:12345:respawn:/sbin/agetty 38400 tty5 linux
+-c6:12345:respawn:/sbin/agetty 38400 tty6 linux
++c1:12345:respawn:/sbin/agetty -l /usr/heimdal/bin/login 38400 tty1 linux
++c2:12345:respawn:/sbin/agetty -l /usr/heimdal/bin/login 38400 tty2 linux
++c3:12345:respawn:/sbin/agetty -l /usr/heimdal/bin/login 38400 tty3 linux
++c4:12345:respawn:/sbin/agetty -l /usr/heimdal/bin/login 38400 tty4 linux
++c5:12345:respawn:/sbin/agetty -l /usr/heimdal/bin/login 38400 tty5 linux
++c6:12345:respawn:/sbin/agetty -l /usr/heimdal/bin/login 38400 tty6 linux
+ 
+ # Local serial lines:
+ #s1:12345:respawn:/sbin/agetty -L ttyS0 9600 vt100

network/heimdal/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+       |-----handy-ruler-----------------------------------------------------|
+heimdal: heimdal (KTH Heimdal Kerberos)
+heimdal:
+heimdal: Heimdal is an implementation of Kerberos 5 largely written in Sweden.
+heimdal: It is freely available under a three clause BSD style license.
+heimdal:
+heimdal: This package includes all basic Kerberos functionality; a KDC
+heimdal: (key distribution center) ``kerberized'' versions of programs such
+heimdal: as such as login and ftp/ftpd , telnet/telnetd and administration
+heimdal: utilities such as ``klist'' and ``kadmin''. krb and GSSAPI libs.
+heimdal:
+heimdal: This package installs in /usr/heimdal to avoid naming conflicts.