libraries/libjpeg-turbo: Removed (included in Slackware 14.2)

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

libraries/libjpeg-turbo/README

@@ -1,9 +0,0 @@
-libjpeg-turbo is a version of libjpeg which uses MMX, SSE, and SSE2
-SIMD instructions to accelerate baseline JPEG compression and
-decompression by about 2-4x on x86 and x86-64 platforms. It is based
-on libjpeg/SIMD but has numerous enhancements.
-
-NOTE:
-The package installs to /opt/libjpeg-turbo by default.
-Pass PREFIX=/usr to the SlackBuild to build it system-wide, but it will
-overwrite Slackware's libjpeg package.

libraries/libjpeg-turbo/libjpeg-turbo.SlackBuild

@@ -1,100 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for libjpeg-turbo
-
-# Copyright 2010 V'yacheslav Stetskevych <slava18 dont_spam_me gmail com>
-# Copyright 2014-2015 Willy Sudiarto Raharjo <willysr@slackbuilds.org>
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=libjpeg-turbo
-VERSION=${VERSION:-1.4.2}
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-# The default is to install the package to /opt/$PRGNAM, but you can override
-# it here. Set PREFIX to /usr to overwrite the conventional libjpeg.
-PREFIX=${PREFIX:-/opt/$PRGNAM}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
-  -o -perm 511 \) -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
-  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=$PREFIX \
-  --libdir=$PREFIX/lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --enable-static=no \
-  --build=$ARCH-slackware-linux
-
-make
-make install-strip DESTDIR=$PKG
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a *.txt README* $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

libraries/libjpeg-turbo/libjpeg-turbo.info

@@ -1,10 +0,0 @@
-PRGNAM="libjpeg-turbo"
-VERSION="1.4.2"
-HOMEPAGE="http://libjpeg-turbo.virtualgl.org"
-DOWNLOAD="http://downloads.sourceforge.net/libjpeg-turbo/libjpeg-turbo-1.4.2.tar.gz"
-MD5SUM="86b0d5f7507c2e6c21c00219162c3c44"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="Willy Sudiarto Raharjo"
-EMAIL="willysr@slackbuilds.org"

libraries/libjpeg-turbo/slack-desc

@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.
-# Line up the first '|' above the ':' following the base package name, and
-# the '|' on the right side marks the last column you can put a character in.
-# You must make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':' except on otherwise blank lines.
-
-             |-----handy-ruler------------------------------------------------------|
-libjpeg-turbo: libjpeg-turbo (accelerated libjpeg)
-libjpeg-turbo:
-libjpeg-turbo: libjpeg-turbo is a version of libjpeg which uses MMX, SSE, and SSE2
-libjpeg-turbo: SIMD instructions to accelerate baseline JPEG compression and
-libjpeg-turbo: decompression by about 2-4x on x86 and x86-64 platforms. It is based
-libjpeg-turbo: on libjpeg/SIMD but has numerous enhancements.
-libjpeg-turbo: See README-turbo.txt in /usr/doc/libjpeg-turbo* for usage hints.
-libjpeg-turbo:
-libjpeg-turbo: Homepage: http://libjpeg-turbo.virtualgl.org
-libjpeg-turbo:
-libjpeg-turbo: