network/frr: Added (The FRRouting Protocol Suite).

Signed-off-by: David Spencer <idlemoor@slackbuilds.org>

network/frr/README

@@ -0,0 +1,24 @@
+FRRouting is free software that manages various IPv4 and IPv6 routing
+protocols.
+
+Currently FRRouting supports BGP4, BGP4+, OSPFv2, OSPFv3, RIPv1,
+RIPv2, RIPng, IS-IS, PIM-SM/MSDP and LDP as well as very early
+support for EIGRP and NHRP.
+
+Groupname and Username
+
+You must have the 'frr' group and user to run this script,
+for example:
+
+    # groupadd -g 357 frr
+    # useradd -d /var/run/frr -s /bin/false -u 357 -g frr frr
+
+You also need a 'frrvty' group :
+
+    # groupadd -g 358 frrvty
+
+And to add 'frr' to 'frrvty' group
+
+    # usermod -a -G frrvty frr
+
+WARNING : this package conflicts with quagga.

network/frr/doinst.sh

@@ -0,0 +1,34 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.frr.new
+config etc/logrotate.d/frr.new
+config etc/frr/daemons.new
+config etc/frr/vtysh.conf.new
+
+if [ -x /usr/bin/install-info ]; then
+  chroot . /usr/bin/install-info --info-dir=/usr/info /usr/info/frr-info.gz 2> /dev/null
+  chroot . /usr/bin/install-info --info-dir=/usr/info /usr/info/frr-info-1.gz 2> /dev/null
+  chroot . /usr/bin/install-info --info-dir=/usr/info /usr/info/frr-info-2.gz 2> /dev/null
+fi

network/frr/frr.SlackBuild

@@ -0,0 +1,160 @@
+#!/bin/sh
+
+# Slackware build script for frr
+
+# Copyright 2018 Thibaut Notteboom, Paris, FRANCE
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=frr
+VERSION=${VERSION:-6.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+if [ "$(grep "^frr:x:357:357" /etc/passwd)" = "" -o \
+     "$(grep "^frr:x:357:" /etc/group)" = "" -o \
+     "$(grep "^frrvty:x:358:frr" /etc/group)" = "" ]; then
+cat << EOF
+The frr user/group and/or the frrvty group do not exist on this system.
+Before running this script, please add them with the following commands:
+
+groupadd -g 357 frr
+groupadd -g 358 frrvty
+useradd -c "FRR FRRouting suite" -d /var/run/frr -s /bin/false -u 357 -g frr -G frrvty frr
+
+EOF
+  exit 1
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+./bootstrap.sh
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sbindir=/usr/sbin \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/frr \
+  --localstatedir=/var/run/frr \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --infodir=/usr/info \
+  --enable-exampledir=/usr/doc/$PRGNAM-$VERSION/examples \
+  --enable-snmp=agentx \
+  --enable-multipath=256 \
+  --enable-user=frr \
+  --enable-group=frr \
+  --enable-vty-group=frrvty \
+  --enable-configfile-mask=0640 \
+  --enable-logfile-mask=0640 \
+  --enable-shell-access \
+  --enable-rpki \
+  --enable-fpm \
+  --enable-vtysh \
+  --enable-watchfrr \
+  --disable-systemd \
+  --disable-static \
+  --without-libpam \
+  --build=$ARCH-slackware-linux
+
+make
+make install-strip DESTDIR=$PKG
+
+install -d -m 750 -o frr -g frr $PKG/etc/frr $PKG/var/log/frr $PKG/var/run/frr
+
+install -D -m 640 -o frr -g frr redhat/daemons $PKG/etc/frr/daemons.new
+install -D -m 640 -o frr -g frrvty tools/etc/frr/vtysh.conf $PKG/etc/frr/vtysh.conf.new
+
+install -D -m 644 redhat/frr.init $PKG/etc/rc.d/rc.frr.new
+install -D -m 644 redhat/frr.logrotate $PKG/etc/logrotate.d/frr.new
+
+install -D -m 644 bgpd/BGP4-MIB.txt $PKG/usr/share/snmp/mibs/BGP4-MIB.txt
+install -D -m 644 eigrpd/EIGRP-MIB.txt $PKG/usr/share/snmp/mibs/EIGRP-MIB.txt
+install -D -m 644 ospf6d/OSPFv3-MIB.txt $PKG/usr/share/snmp/mibs/OSPFv3-MIB.txt
+install -D -m 644 ospfd/OSPF-MIB.txt $PKG/usr/share/snmp/mibs/OSPF-MIB.txt
+install -D -m 644 ospfd/OSPF-TRAP-MIB.txt $PKG/usr/share/snmp/mibs/OSPF-TRAP-MIB.txt
+install -D -m 644 ripd/RIPv2-MIB.txt $PKG/usr/share/snmp/mibs/RIPv2-MIB.txt
+
+# Fix paths
+sed -i 's|usr/lib/frr|usr/sbin|g' $PKG/etc/rc.d/rc.frr.new $PKG/etc/frr/daemons.new
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/frr/modules/*.la
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+rm -f $PKG/usr/info/dir
+gzip -9 $PKG/usr/info/*.info*
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* ChangeLog INSTALL NEWS README* \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

network/frr/frr.info

@@ -0,0 +1,10 @@
+PRGNAM="frr"
+VERSION="6.0"
+HOMEPAGE="https://frrouting.org/"
+DOWNLOAD="https://github.com/FRRouting/frr/archive/frr-6.0/frr-frr-6.0.tar.gz"
+MD5SUM="f7584302a8837194021b82ae646d5e2d"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="perl-xml-libxml c-ares ipaddr-py Sphinx rtrlib"
+MAINTAINER="Thibaut Notteboom"
+EMAIL="thibaut.notteboom@gmail.com"

network/frr/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+   |-----handy-ruler------------------------------------------------------|
+frr: frr (The FRRouting Protocol Suite)
+frr:
+frr: FRRouting is free software that manages various IPv4 and IPv6 routing
+frr: protocols.
+frr:
+frr: Currently FRRouting supports BGP4, BGP4+, OSPFv2, OSPFv3, RIPv1,
+frr: RIPv2, RIPng, IS-IS, PIM-SM/MSDP and LDP as well as very early
+frr: support for EIGRP and NHRP.
+frr:
+frr: FRRouting is a fork of Quagga and conflicts with it.
+frr: